Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 44
Filtrar
1.
Small ; 20(36): e2400638, 2024 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-38804126

RESUMO

The lithium deposited via the complex electrochemical heterogeneous lithium deposition reaction (LDR) process on a lithium foil-based anode (LFA) forms a high-aspect-ratio shape whenever the reaction kinetics reach its limit, threatening battery safety. Thereby, a research strategy that boosts the LDR kinetics is needed to construct a high-power and safe lithium metal anode. In this study, the kinetic limitations of the LDR process on LFA are elucidated through operando and ex situ observations using in-depth electrochemical analyses. In addition, ultra-thin (≈0.5 µm) and high modulus (≥19 GPa) double-walled carbon nanotube (DWNT) membranes with different surface properties are designed to catalyze high-safety LDRs. The oxygen-functionalized DWNT membranes introduced on the LFA top surface simultaneously induce multitudinous lithium nuclei, leading to film-like lithium deposition even at a high current density of 20 mA cm-2. More importantly, the layer-by-layer assembly of the oxygen-functionalized and pristine DWNT membranes results in different surface energies between the top and bottom surfaces, enabling selective surface LDRs underneath the high-modulus bilayer membranes. The protective LDR on the bilayer-covered LFA guarantees an invulnerable cycling process in large-area pouch cells at high current densities for more than 1000 cycles, demonstrating the practicability of LFA in a conventional liquid electrolyte system.

2.
Angew Chem Int Ed Engl ; : e202409992, 2024 Aug 11.
Artigo em Inglês | MEDLINE | ID: mdl-39129217

RESUMO

The concept of a lithiophilic electrode proves inadequate in describing carbon-based electrode materials due to their substantial mismatch in surface energy with lithium metal. However, their notable capacity for lithium chemisorption can increase active lithium concentration required for nucleation and growth, thereby enhancing the electrochemical performance of lithium metal anodes (LMAs). In this study, we elucidate the effects of the supersaturated electrode which has high active lithium capacity around equilibrium lithium potential on LMAs through an in-depth electrochemical comparison using two distinct carbon electrode platforms with differing carbon structures but similar two-dimensional morphologies. In the supersaturated electrode, both the dynamics and thermodynamic states involved in lithium nucleation and growth mechanisms are significantly improved, particularly under continuous current supply conditions. Furthermore, the chemical structures of the solid-electrolyte-interface layers (SEIs) are greatly influenced by the elevated surface lithium concentration environment, resulting in the formation of more conductive lithium-rich SEI layers. The improved dynamics and thermodynamics of surface lithium, coupled with the formation of enhanced SEI layers, contribute to higher power capabilities, enhanced Coulombic efficiencies, and improved cycling performances of LMAs. These results provide new insight into understanding the enhancements in heterogeneous lithium nucleation and growth kinetics on the supersaturated electrode.

3.
J Am Chem Soc ; 145(49): 26632-26644, 2023 Dec 13.
Artigo em Inglês | MEDLINE | ID: mdl-38047734

RESUMO

The water oxidation reaction, the most important reaction for hydrogen production and other sustainable chemistry, is efficiently catalyzed by the Mn4CaO5 cluster in biological photosystem II. However, synthetic Mn-based heterogeneous electrocatalysts exhibit inferior catalytic activity at neutral pH under mild conditions. Symmetry-broken Mn atoms and their cooperative mechanism through efficient oxidative charge accumulation in biological clusters are important lessons but synthesis strategies for heterogeneous electrocatalysts have not been successfully developed. Here, we report a crystallographically distorted Mn-oxide nanocatalyst, in which Ir atoms break the space group symmetry from I41/amd to P1. Tetrahedral Mn(II) in spinel is partially replaced by Ir, surprisingly resulting in an unprecedented crystal structure. We analyzed the distorted crystal structure of manganese oxide using TEM and investigated how the charge accumulation of Mn atoms is facilitated by the presence of a small amount of Ir.

4.
Toxicol Appl Pharmacol ; 402: 115126, 2020 09 01.
Artigo em Inglês | MEDLINE | ID: mdl-32645313

RESUMO

Anemia is a frequent complication of chronic kidney disease (CKD) that causes an increase in morbidity and mortality and accelerates the rate of disease progression. Treatment with recombinant human erythropoietin (rhEPO) is a major breakthrough in the therapy of renal anemia. HM10760A, a long-acting EPO, has been developed as a treatment for anemia in CKD patients. A series of preclinical toxicology studies, such as acute, 4 week repeat-dose, and 13 week repeat-dose, was completed to support the safety of human exposure to HM10760A for up to 13 weeks. The rodent and non-rodent species used in the pivotal preclinical general toxicity studies were rats and monkeys, respectively. A once-a-week or once-every-two-week i.v dosing regimen was applied for 4 week and 13 week repeat-dose toxicity studies, respectively, in consideration of the expected administration frequency in humans. Based on the 13 week repeat-dose toxicity studies, 2.61 µg/kg and 22.03 µg/kg can be considered as the NOAELs (no observed adverse effect levels) in rats and monkeys, respectively. Almost all observations recorded at the low- and mid-dose levels are typical pharmacological effects of EPO and not uniquely attributed HM10760A toxicity. To account for the differences between human being and animal physiologies, the safety of HM10760A needs to be further confirmed in future clinical studies.


Assuntos
Eritropoetina/análogos & derivados , Eritropoetina/farmacologia , Animais , Relação Dose-Resposta a Droga , Esquema de Medicação , Eritropoetina/administração & dosagem , Eritropoetina/efeitos adversos , Macaca fascicularis , Ratos , Ratos Sprague-Dawley
5.
Nanotechnology ; 31(31): 315502, 2020 Jul 31.
Artigo em Inglês | MEDLINE | ID: mdl-32325445

RESUMO

We demonstrate the differential detection of UV-A (ultra-violet 320-400 nm region) and UV-C (100-280 nm) using porous two-dimensional (2D) Nb2O5 and additional Ag nano-particle decoration. The 2D Nb2O5, which has band-absorption edge near the UV-A zone, was synthesized by thermodynamic conversion of 2D material NbSe2 (Nb2O5 has lower Gibbs formation energy than NbSe2). For the differential detection (to distinguish with UV-C absorption), we decorated the Ag nano-particles on the Nb2O5 surface. By coating Ag nano-particles, we can expect (i) a decrease in the area of light absorption by the Ag-coated area, and (ii) an increase of surface plasmon absorption by Ag nano-particles, especially the UV-A region, resulting in strong intensity ratio change UV-A/UV-C.

6.
J Am Chem Soc ; 141(45): 18256-18263, 2019 Nov 13.
Artigo em Inglês | MEDLINE | ID: mdl-31621315

RESUMO

The free energy of H adsorption (ΔGH) on a metallic catalyst has been taken as a descriptor to predict the hydrogen evolution reaction (HER) kinetics but has not been well applied in alkaline media. To assess this, we prepare Pd@Pt and PdH@Pt core-shell octahedra enclosed by Pt(111) facets as model catalysts for controlling the ΔGH affected by the ligand, the strain, and their ensemble effects. The Pt shell thickness is adjusted from 1 to 5 atomic layers by varying the amount of Pt precursor added during synthesis. In an alkaline electrolyte, the HER activity of core-shell models is improved either by the construction of core-shell structures or by the increased number of Pt shells. These experimental results are in good agreement with the ΔGH values calculated by the first-principles density functional theory with a complex surface strained core-shell slab model. However, enhanced HER activities of Pd@Pt and PdH@Pt core-shell nanocrystals over the Pt catalyst are inconsistent with the thermodynamic ΔGH scaling relationship only but can be explained by the work function and apparent ΔGH models that predict the interfacial electric field for the HER.

7.
Molecules ; 23(11)2018 Nov 09.
Artigo em Inglês | MEDLINE | ID: mdl-30423973

RESUMO

The precise description of solute-water interactions is essential to understand the chemo-physical nature in hydration processes. Such a hydration thermodynamics for various solutes has been explored by means of explicit or implicit solvation methods. Using the Poisson-Boltzmann solvation model, the implicit models are well designed to reasonably predict the hydration free energies of polar solutes. The implicit model, however, is known to have shortcomings in estimating those for non-polar aromatic compounds. To investigate a cause of error, we employed a novel systematic framework of quantum-mechanical/molecular-mechanical (QM/MM) coupling protocol in explicit solvation manner, termed DFT-CES, based on the grid-based mean-field treatment. With the aid of DFT-CES, we delved into multiple energy parts, thereby comparing DFT-CES and PB models component-by-component. By applying the modified PB model to estimate the hydration free energies of non-polar solutes, we find a possibility to improve the predictability of PB models. We expect that this study could shed light on providing an accurate route to study the hydration thermodynamics for various solute compounds.


Assuntos
Hidrocarbonetos Aromáticos/química , Modelos Moleculares , Termodinâmica , Algoritmos , Ligação de Hidrogênio , Compostos Orgânicos , Reprodutibilidade dos Testes , Soluções , Solventes , Eletricidade Estática
8.
Molecules ; 22(4)2017 Mar 28.
Artigo em Inglês | MEDLINE | ID: mdl-28350332

RESUMO

Electrochemical CO2 conversion technology is becoming indispensable in the development of a sustainable carbon-based economy. While various types of electrocatalytic systems have been designed, those based on room-temperature ionic liquids (RTILs) have attracted considerable attention because of their high efficiencies and selectivities. Furthermore, it should be possible to develop more advanced electrocatalytic systems for commercial use because target-specific characteristics can be fine-tuned using various combinations of RTIL ions. To achieve this goal, we require a systematic understanding of the role of the RTIL components in electrocatalytic systems, however, their role has not yet been clarified by experiment or theory. Thus, the purpose of this short review is to summarize recent experimental and theoretical mechanistic studies to provide insight into and to develop guidelines for the successful development of new CO2 conversion systems. The results discussed here can be summarized as follows. Complex physical and chemical interactions between the RTIL components and the reaction intermediates, in particular at the electrode surface, are critical for determining the activity and selectivity of the electrocatalytic system, although no single factor dominates. Therefore, more fundamental research is required to understand the physical, chemical, and thermodynamic characteristics of complex RTIL-based electrocatalytic systems.


Assuntos
Dióxido de Carbono/química , Líquidos Iônicos/química , Técnicas Eletroquímicas , Eletrodos , Estrutura Molecular , Temperatura
9.
Chemistry ; 21(3): 1125-9, 2015 Jan 12.
Artigo em Inglês | MEDLINE | ID: mdl-25404494

RESUMO

Unusual CO2 storage in water-saturated MOFs was investigated by combining experiment and simulation. It was found that the micropores of HKUST-1 saturated with water provide an environment that is thermodynamically and kinetically favorable for CO2 capture, but not for N2 and H2 capture. We expect that this phenomenon have potential to be used for successful separation of CO2 from versatile flue streams and pre-combustion gas.

10.
Environ Sci Technol ; 49(2): 1197-205, 2015 Jan 20.
Artigo em Inglês | MEDLINE | ID: mdl-25532462

RESUMO

In this study, we investigated experimentally and computationally the effect of organo-mineral complexes on the nucleation kinetics of CO2 hydrate. These complexes formed via adsorption of zwitter-ionic glycine (Gly-zw) onto the surface of sodium montmorillonite (Na-MMT). The electrostatic attraction between the −NH3(+) group of Gly-zw, and the negatively charged Na-MMT surface, provides the thermodynamic driving force for the organo-mineral complexation. We suggest that the complexation of Gly-zw on the Na-MMT surface accelerates CO2 hydrate nucleation kinetics by increasing the mineral­water interfacial area (thus increasing the number of effective hydrate-nucleation sites), and also by suppressing the thermal fluctuation of solvated Na(+) (a well-known hydrate formation inhibitor) in the vicinity of the mineral surface by coordinating with the −COO(­) groups of Gly-zw. We further confirmed that the local density of hydrate-forming molecules (i.e., reactants of CO2 and water) at the mineral surface (regardless of the presence of Gly-zw) becomes greater than that of bulk phase. This is expected to promote the hydrate nucleation kinetics at the surface. Our study sheds new light on CO2 hydrate nucleation kinetics in heterogeneous marine environments, and could provide knowledge fundamental to successful CO2 sequestration under seabed sediments.


Assuntos
Bentonita/química , Dióxido de Carbono/análise , Água/química , Adsorção , Dióxido de Carbono/química , Meio Ambiente , Cinética , Minerais/química , Simulação de Dinâmica Molecular , Salinidade , Processos Estocásticos , Propriedades de Superfície , Termodinâmica
11.
J Am Chem Soc ; 136(32): 11355-61, 2014 Aug 13.
Artigo em Inglês | MEDLINE | ID: mdl-25061918

RESUMO

CO2 conversion is an essential technology to develop a sustainable carbon economy for the present and the future. Many studies have focused extensively on the electrochemical conversion of CO2 into various useful chemicals. However, there is not yet a solution of sufficiently high enough efficiency and stability to demonstrate practical applicability. In this work, we use first-principles-based high-throughput screening to propose silver-based catalysts for efficient electrochemical reduction of CO2 to CO while decreasing the overpotential by 0.4-0.5 V. We discovered the covalency-aided electrochemical reaction (CAER) mechanism in which p-block dopants have a major effect on the modulating reaction energetics by imposing partial covalency into the metal catalysts, thereby enhancing their catalytic activity well beyond modulations arising from d-block dopants. In particular, sulfur or arsenic doping can effectively minimize the overpotential with good structural and electrochemical stability. We expect this work to provide useful insights to guide the development of a feasible strategy to overcome the limitations of current technology for electrochemical CO2 conversion.

12.
J Am Chem Soc ; 136(25): 9070-7, 2014 Jun 25.
Artigo em Inglês | MEDLINE | ID: mdl-24905892

RESUMO

N-doped carbon materials are considered as next-generation oxygen reduction reaction (ORR) catalysts for fuel cells due to their prolonged stability and low cost. However, the underlying mechanism of these catalysts has been only insufficiently identified, preventing the rational design of high-performing catalysts. Here, we show that the first electron is transferred into O2 molecules at the outer Helmholtz plane (ET-OHP) over a long range. This is in sharp contrast to the conventional belief that O2 adsorption must precede the ET step and thus that the active site must possess as good an O2 binding character as that which occurs on metallic catalysts. Based on the ET-OHP mechanism, the location of the electrode potential dominantly characterizes the ORR activity. Accordingly, we demonstrate that the electrode potential can be elevated by reducing the graphene size and/or including metal impurities, thereby enhancing the ORR activity, which can be transferred into single-cell operations with superior stability.

13.
Phys Chem Chem Phys ; 16(41): 22717-22, 2014 Nov 07.
Artigo em Inglês | MEDLINE | ID: mdl-25232710

RESUMO

Porous materials have provided us unprecedented opportunities to develop emerging technologies such as molecular storage systems and separation mechanisms. Pores have also been used as supports to contain gas hydrates for the application in gas treatments. Necessarily, an exact understanding of the properties of gas hydrates in confining pores is important. Here, we investigated the formation of CO2, CH4 and N2 hydrates in non-interlamellar voids in graphene oxide (GO), and their thermodynamic behaviors. For that, low temperature XRD and P-T traces were conducted to analyze the water structure and confirm hydrate formation, respectively, in GO after its exposure to gaseous molecules. Confinement and strong interaction of water with the hydrophilic surface of graphene oxide reduce water activity, which leads to the inhibited phase behavior of gas hydrates.

14.
Adv Mater ; 36(32): e2403273, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-38742630

RESUMO

Based on experimental and computational evidence, phthalocyanine (Pc) compounds in the form of quaternary-bound metal-nitrogen (N) atoms are the most effective catalysts for oxygen reduction reaction (ORR). However, the heat treatment process used in their synthesis may compromise the ideal structure, causing the agglomeration of transition metals. To overcome this issue, a novel method is developed for synthesizing iron (Fe) single-atom catalysts with ideal structures supported by thermally exfoliated graphene oxide (GO). This is achieved through a short heat treatment of only 2.5 min involving FePc and N, N-dimethylformamide in the presence of GO. According to the synthesis mechanism revealed by this study, carbon monoxide acts as a strong linker between the single Fe atoms and graphene. It facilitates the formation of a structure containing oxygen species between FeN4 and graphene, which provides high activity and stability for the ORR. These catalysts possess an enormous number of active sites and exhibit enhanced activity toward the alkaline ORR. They demonstrate excellent performance when applied to real electrochemical devices, such as zinc-air batteries and anion exchange membrane fuel cells. It is expected that the instantaneous heat treatment method developed in this study will aid in the development of high-performing single-atom catalysts.

15.
J Am Chem Soc ; 135(26): 9733-42, 2013 Jul 03.
Artigo em Inglês | MEDLINE | ID: mdl-23758262

RESUMO

Lithium-oxygen chemistry offers the highest energy density for a rechargeable system as a "lithium-air battery". Most studies of lithium-air batteries have focused on demonstrating battery operations in pure oxygen conditions; such a battery should technically be described as a "lithium-dioxygen battery". Consequently, the next step for the lithium-"air" battery is to understand how the reaction chemistry is affected by the constituents of ambient air. Among the components of air, CO2 is of particular interest because of its high solubility in organic solvents and it can react actively with O2(-•), which is the key intermediate species in Li-O2 battery reactions. In this work, we investigated the reaction mechanisms in the Li-O2/CO2 cell under various electrolyte conditions using quantum mechanical simulations combined with experimental verification. Our most important finding is that the subtle balance among various reaction pathways influencing the potential energy surfaces can be modified by the electrolyte solvation effect. Thus, a low dielectric electrolyte tends to primarily form Li2O2, while a high dielectric electrolyte is effective in electrochemically activating CO2, yielding only Li2CO3. Most surprisingly, we further discovered that a high dielectric medium such as DMSO can result in the reversible reaction of Li2CO3 over multiple cycles. We believe that the current mechanistic understanding of the chemistry of CO2 in a Li-air cell and the interplay of CO2 with electrolyte solvation will provide an important guideline for developing Li-air batteries. Furthermore, the possibility for a rechargeable Li-O2/CO2 battery based on Li2CO3 may have merits in enhancing cyclability by minimizing side reactions.


Assuntos
Dióxido de Carbono/química , Fontes de Energia Elétrica , Lítio/química , Oxigênio/química , Ar , Tamanho da Partícula , Teoria Quântica , Propriedades de Superfície
16.
Artigo em Inglês | MEDLINE | ID: mdl-38015616

RESUMO

In-depth understanding of the lithium interaction characteristics within multidomain silicon suboxide is indispensable for optimizing the electrochemical performance of silicon suboxide anode materials for lithium-ion batteries. In this study, we investigate the domain-dependent thermodynamic and kinetic properties of lithium atoms within systematically designed multidomain silicon suboxide models composed of Si, SiO2, and Si/SiO2 interface by performing a series of computational simulations combined with a unique tomography-like sampling scheme. We find that the Si/SiO2 interfacial region exhibits preferential thermodynamics and kinetics for lithiation and can serve as a critical lithium transport channel during charge-discharge cycles, while the SiO2 domain is likely to be excluded from lithiation due to its high resistance to lithium diffusion. Consequently, a significant fraction of lithium is expected to be trapped at the Si/SiO2 interface during the discharge process, which ultimately contributes to a low initial Coulombic efficiency. This theoretical understanding suggests that the formation of continuously connected lithium-transportable Si/SiO2 interfacial channels surrounding the Si domains, along with a well-structured shallow SiO2 framework through the use of appropriate synthesis methods, is essential for maximizing the electrochemical performance of silicon suboxide anode materials.

17.
Adv Mater ; 35(12): e2209128, 2023 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-36625665

RESUMO

The galvanostatic lithiation/sodiation voltage profiles of hard carbon anodes are simple, with a sloping drop followed by a plateau. However, a precise understanding of the corresponding redox sites and storage mechanisms is still elusive, which hinders further development in commercial applications. Here, a comprehensive comparison of the lithium- and sodium-ion storage behaviors of hard carbon is conducted, yielding the following key findings: 1) the sloping voltage section is presented by the lithium-ion intercalation in the graphitic lattices of hard carbons, whereas it mainly arises from the chemisorption of sodium ions on their inner surfaces constituting closed pores, even if the graphitic lattices are unoccupied; 2) the redox sites for the plateau capacities are the same as those for the closed pores regardless of the alkali ions; 3) the sodiation plateau capacities are mostly determined by the volume of the available closed pore, whereas the lithiation plateau capacities are primarily affected by the intercalation propensity; and 4) the intercalation preference and the plateau capacity have an inverse correlation. These findings from extensive characterizations and theoretical investigations provide a relatively clear elucidation of the electrochemical footprint of hard carbon anodes in relation to the redox mechanisms and storage sites for lithium and sodium ions, thereby providing a more rational design strategy for constructing better hard carbon anodes.

18.
Adv Mater ; 34(6): e2106913, 2022 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-34773720

RESUMO

Memristors integrated into a crossbar-array architecture (CAA) are promising candidates for nonvolatile memory elements in artificial neural networks. However, the relatively low reliability of memristors coupled with crosstalk and sneak currents in CAAs have limited the realization of the full potential of this technology. Here, high-reliability Na-doped TiO2  memristors grown in situ by atomic layer deposition (ALD) are demonstrated, where reversible Na migration underlies the resistive-switching mechanism. By employing ALD growth with an aqueous NaOH reactant in deionized water, uniform implantation of Na dopants is achieved in the crystallized TiO2  thin films at 250 °C without post-annealing. The resulting Na-doped TiO2  memristors show electroforming-free and self-rectifying resistive-switching behavior, and they are ideally suited for selectorless CAAs. Effective addressing of selectorless nodes is demonstrated via electrical measurement of individual memristors in a 6 × 6 crossbar using a read current of less than 1 µA with negligible sneak current at or below the noise level of ≈100 pA. Finally, the long-term potentiation and depression synaptic behavior from these Na-doped TiO2  memristors achieves greater than 99.1% accuracy for image-recognition tasks using a convolutional neural network based on the selectorless of crossbar arrays.

19.
Adv Sci (Weinh) ; 9(6): e2104145, 2022 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-34939362

RESUMO

Despite the development of multidimensional state-of-the-art electrode materials for constructing better lithium metal anodes (LMAs), the key factors influencing the electrochemical performance of LMAs are still poorly understood. Herein, it is demonstrated that the local lithium ion concentration at the interface between the electrode and electrolyte exerts significant influence on the electrochemical performance of LMAs. The local ion concentration is multiplied by introducing pseudocapacitive nanocarbons (PNCs) containing numerous heteroatoms, because PNCs can store large numbers of lithium ions in a pseudocapacitive manner, and promote the formation of an electrochemical double layer. The high interfacial lithium ion concentration induces the formation of lithium-rich inorganic solid-electrolyte-interface layers with high ionic conductivities, and facilitates sustainable and stable supplies of lithium ion charge carriers on the overall active surfaces of the PNCs. Accordingly, the PNC-induced LMA exhibits high Coulombic efficiencies, high rate capabilities, and stable cycling performance.

20.
Nat Commun ; 13(1): 174, 2022 Jan 10.
Artigo em Inglês | MEDLINE | ID: mdl-35013347

RESUMO

To design electrochemical interfaces for efficient electric-chemical energy interconversion, it is critical to reveal the electric double layer (EDL) structure and relate it with electrochemical activity; nonetheless, this has been a long-standing challenge. Of particular, no molecular-level theories have fully explained the characteristic two peaks arising in the potential-dependence of the EDL capacitance, which is sensitively dependent on the EDL structure. We herein demonstrate that our first-principles-based molecular simulation reproduces the experimental capacitance peaks. The origin of two peaks emerging at anodic and cathodic potentials is unveiled to be an electrosorption of ions and a structural phase transition, respectively. We further find a cation complexation gradually modifies the EDL structure and the field strength, which linearly scales the carbon dioxide reduction activity. This study deciphers the complex structural response of the EDL and highlights its catalytic importance, which bridges the mechanistic gap between the EDL structure and electrocatalysis.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA