Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel.

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries1 and electrocatalysts2. Experimental characterizations of such materials by operando microscopy produce rich image datasets3-6, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation7. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles. Combining a large dataset of STXM images with a thermodynamically consistent electrochemical phase-field model, partial differential equation (PDE)-constrained optimization and uncertainty quantification, we extract the free-energy landscape and reaction kinetics and verify their consistency with theoretical models. We also simultaneously learn the spatial heterogeneity of the reaction rate, which closely matches the carbon-coating thickness profiles obtained through Auger electron microscopy (AEM). Across 180,000 image pixels, the mean discrepancy with the learned model is remarkably small (<7%) and comparable with experimental noise. Our results open the possibility of learning nonequilibrium material properties beyond the reach of traditional experimental methods and offer a new non-destructive technique for characterizing and optimizing heterogeneous reactive surfaces.

Elucidating Heterogeneous Li Insertion Using Single-Crystalline and Freestanding Layered Oxide Thin Film.

The kinetics of interfacial ion insertion govern the uniformity of electrochemical reactions, playing a crucial role in lithium-ion battery performance. In two-dimensional lithium-conducting layered-oxide battery particles, variation in insertion rates across insertion channels remains unclear due to poorly defined crystal orientation at the solid-liquid interface and solid-state-lithium-diffusion length. This ambiguity complicates understanding inhomogeneous lithium-insertion channels activation. A systematic study requires crystallographically predefined interfaces and in situ lithium-concentration mapping. Here, we fabricated a freestanding, (104)-oriented-LiNi1/3Mn1/3Co1/3O2 single-crystal thin film using dissolution-induced release and performed in situ scanning-transmission-X-ray-microscopy to spatially resolve lithium-insertion at well-defined-interfaces. We observed heterogeneous lithium-concentration evolution due to channel-by-channel insertion rate variation, despite the potential for homogeneous lithium distribution via a solid-solution-phase at equilibrium in NMC111. Increasing current density exacerbates this heterogeneity, highlighting channel-by-channel variation. Our findings provide critical insights into battery electrode utilization and lifetime management, potentially guiding the design of more efficient and durable lithium-ion batteries.

Label-Free and Colorimetric Detection of Influenza A Virus via Receptor-Mediated Viral Fusion with Plasmonic Vesicles.

The rapid transmission and numerous re-emerging human influenza virus variants that spread via the respiratory system have led to severe global damage, emphasizing the need for detection tools that can recognize active and intact virions with infectivity. Here, this work presents a plasmonic vesicle-mediated fusogenic immunoassay (PVFIA) comprising gold nanoparticle (GNP) encapsulating fusogenic polymeric vesicles (plasmonic vesicles; PVs) for the label-free and colorimetric detection of influenza A virus (IAV). The PVFIA combines two sequential assays: a biochip-based immunoassay for target-specific capture and a PV-induced fusion assay for color change upon the IAV-PV fusion complex formation. The PVFIA demonstrates excellent specificity in capturing the target IAV, while the fusion conditions and GNP induce a significant color change, enabling visual detection. The integration of two consecutive assays results in a low detection limit (100.7919 EID50 mL-1 ) and good reliability (0.9901), indicating sensitivity that is 104.208 times higher than conventional immunoassay. Leveraging the PV viral membrane fusion activity renders the PVFIA promising for point-of-care diagnostics through colorimetric detection. The innovative approach addresses the critical need for detecting active and intact virions with infectivity, providing a valuable tool with which to combat the spread of the virus.

Rapid Visible Detection of African Swine Fever Virus Using Hybridization Chain Reaction-Sensitized Magnetic Nanoclusters and Affinity Chromatography.

African swine fever virus (ASFV) is a severe and persistent threat to the global swine industry. As there are no vaccines against ASFV, there is an immense need to develop easy-to-use, cost-effective, and rapid point-of-care (POC) diagnostic platforms to detect and prevent ASFV outbreaks. Here, a novel POC diagnostic system based on affinity column chromatography for the optical detection of ASFV is presented. This system employs an on-particle hairpin chain reaction to sensitize magnetic nanoclusters with long DNA strands in a target-selective manner, which is subsequently fed into a column chromatography device to produce quantitatively readable and colorimetric signals. The detection approach does not require expensive analytical apparatus or immobile instrumentation. The system can detect five genes constituting the ASFV whole genome with a detection limit of ≈19.8 pm in swine serum within 30 min at laboratory room temperature. With an additional pre-amplification step using polymerase chain reaction (PCR), the assay is successfully applied to detect the presence of ASFV in 30 suspected swine samples with 100% sensitivity and specificity, similar to quantitative PCR. Thus, this simple, inexpensive, portable, robust, and customizable platform for the early detection of ASFV can facilitate the timely surveillance and implementation of control measures.

Effect of Contrast Level and Image Format on a Deep Learning Algorithm for the Detection of Pneumothorax with Chest Radiography.

Under the black-box nature in the deep learning model, it is uncertain how the change in contrast level and format affects the performance. We aimed to investigate the effect of contrast level and image format on the effectiveness of deep learning for diagnosing pneumothorax on chest radiographs. We collected 3316 images (1016 pneumothorax and 2300 normal images), and all images were set to the standard contrast level (100%) and stored in the Digital Imaging and Communication in Medicine and Joint Photographic Experts Group (JPEG) formats. Data were randomly separated into 80% of training and 20% of test sets, and the contrast of images in the test set was changed to 5 levels (50%, 75%, 100%, 125%, and 150%). We trained the model to detect pneumothorax using ResNet-50 with 100% level images and tested with 5-level images in the two formats. While comparing the overall performance between each contrast level in the two formats, the area under the receiver-operating characteristic curve (AUC) was significantly different (all p < 0.001) except between 125 and 150% in JPEG format (p = 0.382). When comparing the two formats at same contrast levels, AUC was significantly different (all p < 0.001) except 50% and 100% (p = 0.079 and p = 0.082, respectively). The contrast level and format of medical images could influence the performance of the deep learning model. It is required to train with various contrast levels and formats of image, and further image processing for improvement and maintenance of the performance.

Pd/Fe2O3 with Electronic Coupling Single-Site Pd-Fe Pair Sites for Low-Temperature Semihydrogenation of Alkynes.

Dispersing single palladium atoms on a support is promising to minimize the usage of palladium and improve the selectivity for alkyne semihydrogenation, but its activity is often very low as a result of unfavorable H2 activation. Here, we load palladium onto α-Fe2O3(012) to construct highly active and stable single-site Pd-Fe pairs with luxuriant d-electron domination near the Fermi level driven by strong electronic coupling and prove that Pd-Fe pairs cooperatively adsorb H2 and dissociate an H─H bond, whereas solo Pd sites enable preferential desorption of C═C intermediate, thus achieving both high activity and high selectivity for alkyne hydrogenation. This catalyst exhibits state-of-the-art performance in purifying acetylene of ethylene stream, with 99.6% and 100% conversion and 96.7% and 94.7% selectivity at 353 and 393 K, respectively, and excellent stability with negligible activity decay after a 200 h test. This single-site pair inherits the advantage but overcomes the weakness of both Pd ensemble and single Pd atoms, enabling ultralow-Pd-loading catalysts for selective hydrogenation.

A flap endonuclease 1-assisted universal viral nucleic acid sensing system using surface-enhanced Raman scattering.

The continued uncertainty of emerging infectious viral diseases has led to an extraordinary urgency to develop advanced molecular diagnostic tests that are faster, more reliable, simpler to use, and readily available than traditional methods. This study presents a system that can accurately and rapidly trace viral nucleic acids by employing flap endonuclease 1 (FEN1)-assisted specific DNA cleavage reactions and surface-enhanced Raman scattering (SERS)-based analysis. The designed Raman tag-labeled 5'- and 3'-flap provider DNA yielded structurally defined DNA substrates on magnetic nanoparticle surfaces when a target was present. The FEN1 enzyme subsequently processes the substrates formed via an invasive cleavage reaction, producing 5'-flap DNA products. Magnetic separation allows efficient purification of flap products from reaction mixtures. The isolated solution was directly applied onto high aspect-ratio plasmonic silver nanopillars serving as SERS-active substrates to induce amplified SERS signals. We verified the developed SERS-based sensing system using a synthetic target complementary to an avian influenza A (H9N2) virus gene and examined the detection performance of the system using complementary DNA (cDNA) derived from H9N2 viral RNA. As a result, we could detect a synthetic target with a detection limit of 41.1 fM with a single base-pair discrimination ability and achieved multiplexed detection capability for two targets. Using cDNA samples from H9N2 viruses, we observed a high concordance of R2 = 0.917 between the data obtained from SERS and the quantitative polymerase chain reaction. We anticipate that this enzyme-assisted SERS sensor may provide insights into the development of high-performance molecular diagnostic tools that can respond rapidly to viral pathogens.

Wave propagation across the skull under bone conduction: Dependence on coupling methods.

This study is aimed at the quantitative investigation of wave propagation through the skull bone and its dependence on different coupling methods of the bone conduction hearing aid (BCHA). Experiments were conducted on five Thiel embalmed whole head cadaver specimens. An electromagnetic actuator from a commercial BCHA was mounted on a 5-Newton steel headband, at the mastoid, on a percutaneously implanted screw (Baha® Connect), and transcutaneously with a Baha® Attract (Cochlear Limited, Sydney, Australia), at the clinical bone anchored hearing aid (BAHA) location. Surface motion was quantified by sequentially measuring ∼200 points on the skull surface via a three-dimensional laser Doppler vibrometer (3D LDV) system. The experimental procedure was repeated virtually, using a modified LiUHead finite element model (FEM). Both experiential and FEM methods showed an onset of deformations; first near the stimulation area, at 250-500 Hz, which then extended to the inferior ipsilateral skull surface, at 0.5-2 kHz, and spread across the whole skull above 3-4 kHz. Overall, stiffer coupling (Connect versus Headband), applied at a location with lower mechanical stiffness (the BAHA location versus mastoid), led to a faster transition and lower transition frequency to local deformations and wave motion. This behaviour was more evident at the BAHA location, as the mastoid was more agnostic to coupling condition.

One-Pot Heterointerfacial Metamorphosis for Synthesis and Control of Widely Varying Heterostructured Nanoparticles.

Despite remarkable facileness and potential in forming a wide variety of heterostructured nanoparticles with extraordinary compositional and structural complexity, one-pot synthesis of multicomponent heterostructures is largely limited by the lack of fundamental mechanistic understanding, designing principles, and well-established, generally applicable chemical methods. Herein, we developed a one-pot heterointerfacial metamorphosis (1HIM) method that allows heterointerfaces inside a particle to undergo multiple equilibrium stages to form a variety of highly crystalline heterostructured nanoparticles at a relatively low temperature (<100 °C). As proof-of-concept experiments, it was shown that widely different single-crystalline semiconductor-metal anisotropic nanoparticles with synergistic chemical, spectroscopic, and band-gap-engineering properties, including a series of metal-semiconductor nanoframes with high structural and compositional tunability, can be formed by using the 1HIM approach. 1HIM offers a new paradigm to synthesize previously unobtainable or poorly controllable heterostructures with unique or synergistic properties and functions.

Relationship between Endolymphatic Hydrops and Symptoms of Meniere Disease in Acoustic Hearing.

HYPOTHESIS: The endolymphatic hydrops (EH) does not affect hearing loss significantly at low frequencies, whereas the hydrops affects the diplacusis. BACKGROUND: There have been many arguments whether the EH cause the Meniere disease. Despite a lot of experimental studies to investigate the Meniere disease, there have been little modeling studies, which are helpful to understand the mechanism. METHODS: A 3D finite element model of the human cochlea and the middle ear was used for investigation of the relationship between EH and hearing loss at low frequencies and diplacusis (2 specific symptoms of Meniere disease). While the cochlear geometry was simplified as a tapered box shape, the middle ear was based on the real geometry obtained from µCT images. EH is implemented by prestress on the basilar membrane surface in the simulation. RESULTS: The EH did not cause significant hearing loss at low frequencies in both air- and bone-conducted hearing. Rather, this disorder caused a shift in best frequency (BF) position to the base at low frequencies below about 250 Hz. The BF shift can explain the diplacusis because a low-frequency sound can be perceived as a slightly higher frequency so that Meniere patients can perceive 2 different frequency sounds corresponding to a given single-frequency sound. CONCLUSION: The EH cannot be a sufficient condition for Meniere disease, whereas the hydrops can cause the diplacusis.

Non-precious-metal catalysts for alkaline water electrolysis: operando characterizations, theoretical calculations, and recent advances.

Recent years have witnessed an upsurge in the development of non-precious catalysts (NPCs) for alkaline water electrolysis (AWE), especially with the strides made in experimental and computational techniques. In this contribution, the most recent advances in NPCs for AWE were systematically reviewed, emphasizing the application of in situ/operando experimental methods and density functional theory (DFT) calculations in their understanding and development. First, we briefly introduced the fundamentals of the anode and cathode reaction for AWE, i.e., the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), respectively. Next, the most popular in situ/operando approaches for characterizing AWE catalysts, including hard and soft XAS, ambient-pressure XPS, liquid and identical location TEM, electrochemical mass spectrometry, and Raman spectroscopy were thoroughly summarized. Subsequently, we carefully discussed the principles, computational methods, applications, and combinations of DFT with machine learning for modeling NPCs and predicting the alkaline OER and HER. With the improved understanding of the structure-property-performance relationship of NPCs for AWE, we proceeded to overview their current development, summarising state-of-the-art design strategies to boost their activity. In addition, advances in various extensively investigated NPCs for AWE were evaluated. By conveying these methods, progress, insights, and perspectives, this review will contribute to a better understanding and rational development of non-precious AWE electrocatalysts for hydrogen production.

Porous gold nanoparticles for attenuating infectivity of influenza A virus.

BACKGROUND: Influenza viruses (IVs) have become increasingly resistant to antiviral drugs that target neuraminidase and matrix protein 2 due to gene mutations that alter their drug-binding target protein regions. Consequently, almost all recent IV pandemics have exhibited resistance to commercial antiviral vaccines. To overcome this challenge, an antiviral target is needed that is effective regardless of genetic mutations. MAIN BODY: In particular, hemagglutinin (HA), a highly conserved surface protein across many IV strains, could be an effective antiviral target as it mediates binding of IVs with host cell receptors, which is crucial for membrane fusion. HA has 6 disulfide bonds that can easily bind with the surfaces of gold nanoparticles. Herein, we fabricated porous gold nanoparticles (PoGNPs) via a surfactant-free emulsion method that exhibited strong affinity for disulfide bonds due to gold-thiol interactions, and provided extensive surface area for these interactions. A remarkable decrease in viral infectivity was demonstrated by increased cell viability results after exposing MDCK cells to various IV strains (H1N1, H3N2, and H9N2) treated with PoGNP. Most of all, the viability of MDCK cells infected with all IV strains increased to 96.8% after PoGNP treatment of the viruses compared to 33.9% cell viability with non-treated viruses. Intracellular viral RNA quantification by real-time RT-PCR also confirmed that PoGNP successfully inhibited viral membrane fusion by blocking the viral entry process through conformational deformation of HA. CONCLUSION: We believe that the technique described herein can be further developed for PoGNP-utilized antiviral protection as well as metal nanoparticle-based therapy to treat viral infection. Additionally, facile detection of IAV can be achieved by developing PoGNP as a multiplatform for detection of the virus.

Controlling Residual Lithium in High-Nickel (>90 %) Lithium Layered Oxides for Cathodes in Lithium-Ion Batteries.

The rampant generation of lithium hydroxide and carbonate impurities, commonly known as residual lithium, is a practical obstacle to the mass-scale synthesis and handling of high-nickel (>90 %) layered oxides and their use as high-energy-density cathodes for lithium-ion batteries. Herein, we suggest a simple in situ method to control the residual lithium chemistry of a high-nickel lithium layered oxide, Li(Ni0.91 Co0.06 Mn0.03 )O2 (NCM9163), with minimal side effects. Based on thermodynamic considerations of the preferred reactions, we systematically designed a synthesis process that preemptively converts residual Li2 O (the origin of LiOH and Li2 CO3 ) into a more stable compound by injecting reactive SO2 gas. The preformed lithium sulfate thin film significantly suppresses the generation of LiOH and Li2 CO3 during both synthesis and storage, thereby mitigating slurry gelation and gas evolution and improving the cycle stability.

Fluid-enhanced surface diffusion controls intraparticle phase transformations.

Phase transformations driven by compositional change require mass flux across a phase boundary. In some anisotropic solids, however, the phase boundary moves along a non-conductive crystallographic direction. One such material is LiXFePO4, an electrode for lithium-ion batteries. With poor bulk ionic transport along the direction of phase separation, it is unclear how lithium migrates during phase transformations. Here, we show that lithium migrates along the solid/liquid interface without leaving the particle, whereby charge carriers do not cross the double layer. X-ray diffraction and microscopy experiments as well as ab initio molecular dynamics simulations show that organic solvent and water molecules promote this surface ion diffusion, effectively rendering LiXFePO4 a three-dimensional lithium-ion conductor. Phase-field simulations capture the effects of surface diffusion on phase transformation. Lowering surface diffusivity is crucial towards supressing phase separation. This work establishes fluid-enhanced surface diffusion as a key dial for tuning phase transformation in anisotropic solids.

Physical Biology of the Materials-Microorganism Interface.

Future solar-to-chemical production will rely upon a deep understanding of the material-microorganism interface. Hybrid technologies, which combine inorganic semiconductor light harvesters with biological catalysis to transform light, air, and water into chemicals, already demonstrate a wide product scope and energy efficiencies surpassing that of natural photosynthesis. But optimization to economic competitiveness and fundamental curiosity beg for answers to two basic questions: (1) how do materials transfer energy and charge to microorganisms, and (2) how do we design for bio- and chemocompatibility between these seemingly unnatural partners? This Perspective highlights the state-of-the-art and outlines future research paths to inform the cadre of spectroscopists, electrochemists, bioinorganic chemists, material scientists, and biologists who will ultimately solve these mysteries.

Host Cell Mimic Polymersomes for Rapid Detection of Highly Pathogenic Influenza Virus via a Viral Fusion and Cell Entry Mechanism.

Highly pathogenic avian influenza virus (HPAIV) infections have occurred continuously and crossed the species barrier to humans, leading to fatalities. A polymerase chain reaction based molecular test is currently the most sensitive diagnostic tool for HPAIV; however, the results must be analyzed in centralized diagnosis systems by a trained individual. This requirement leads to delays in quarantine and isolation. To control the spread of HPAIV, rapid and accurate diagnostics suitable for field testing are needed, and the tests must facilitate a differential diagnosis between HPAIV and low pathogenic avian influenza virus (LPAIV), which undergo cleavage specifically by trypsin- or furin-like proteases, respectively. In this study, a differential avian influenza virus rapid test kit is developed and evaluated in vitro and using clinical specimens from HPAIV H5N1-infected animals. It is demonstrated that this rapid test kit provides highly sensitive and specific detection of HPAIV and LPAIV and is thus a useful field diagnostic tool for H5N1 HPAIV outbreaks and for rapid quarantine control of the disease.

Visual-Inertial Odometry with Robust Initialization and Online Scale Estimation.

Visual-inertial odometry (VIO) has recently received much attention for efficient and accurate ego-motion estimation of unmanned aerial vehicle systems (UAVs). Recent studies have shown that optimization-based algorithms achieve typically high accuracy when given enough amount of information, but occasionally suffer from divergence when solving highly non-linear problems. Further, their performance significantly depends on the accuracy of the initialization of inertial measurement unit (IMU) parameters. In this paper, we propose a novel VIO algorithm of estimating the motional state of UAVs with high accuracy. The main technical contributions are the fusion of visual information and pre-integrated inertial measurements in a joint optimization framework and the stable initialization of scale and gravity using relative pose constraints. To account for the ambiguity and uncertainty of VIO initialization, a local scale parameter is adopted in the online optimization. Quantitative comparisons with the state-of-the-art algorithms on the European Robotics Challenge (EuRoC) dataset verify the efficacy and accuracy of the proposed method.

Reactive Oxygen Species-Regulating Polymersome as an Antiviral Agent against Influenza Virus.

Reactive oxygen species (ROS) produced during mitochondrial oxidative phosphorylation play an important role as signal messengers in the immune system and also regulate signal transduction. ROS production, initiated as a consequence of microbial invasion, if generated at high levels, induces activation of the MEK (mitogen-activated protein kinase kinase)/ERK (extracellular signal-regulated kinase) pathway to promote cell survival and proliferation. However, viruses hijack the host cells' pathways, causing biphasic activation of the MEK/ERK cascade. Thus, regulation of ROS leads to concomitant inhibition of virus replication. In the present study, poly(aniline-co-pyrrole) polymerized nanoregulators (PASomes) to regulate intracellular ROS levels are synthesized, exploiting their oxidizing-reducing characteristics. Poly(aniline-co-pyrrole) embedded within an amphiphilic methoxy polyethylene glycol-block-polyphenylalanine copolymer (mPEG-b-pPhe) are used. It is demonstrated that the PASomes are water soluble, biocompatible, and could control ROS levels successfully in vitro, inhibiting viral replication and cell death. Furthermore, the effects of homopolymerized nanoregulators (polypyrrole assembled with mPEG-b-pPhe or polyaniline assembled with mPEG-b-pPhe) are compared with those of the PASomes. Consequently, it is confirmed that the PASomes can regulate intracellular ROS levels successfully and suppress viral infection, thereby increasing the cell survival rate.

Thermal Transport in Silicon Nanowires at High Temperature up to 700 K.

Thermal transport in silicon nanowires has captured the attention of scientists for understanding phonon transport at the nanoscale, and the thermoelectric figure-of-merit (ZT) reported in rough nanowires has inspired engineers to develop cost-effective waste heat recovery systems. Thermoelectric generators composed of silicon target high-temperature applications due to improved efficiency beyond 550 K. However, there have been no studies of thermal transport in silicon nanowires beyond room temperature. High-temperature measurements also enable studies of unanswered questions regarding the impact of surface boundaries and varying mode contributions as the highest vibrational modes are activated (Debye temperature of silicon is 645 K). Here, we develop a technique to investigate thermal transport in nanowires up to 700 K. Our thermal conductivity measurements on smooth silicon nanowires show the classical diameter dependence from 40 to 120 nm. In conjunction with Boltzmann transport equation, we also probe an increasing contribution of high-frequency phonons (optical phonons) in smooth silicon nanowires as the diameter decreases and the temperature increases. Thermal conductivity of rough silicon nanowires is significantly reduced throughout the temperature range, demonstrating a potential for efficient thermoelectric generation (e.g., ZT = 1 at 700 K).

Ballistic phonon transport in holey silicon.

When the size of semiconductors is smaller than the phonon mean free path, phonons can carry heat with no internal scattering. Ballistic phonon transport has received attention for both theoretical and practical aspects because Fourier's law of heat conduction breaks down and the heat dissipation in nanoscale transistors becomes unpredictable in the ballistic regime. While recent experiments demonstrate room-temperature evidence of ballistic phonon transport in various nanomaterials, the thermal conductivity data for silicon in the length scale of 10-100 nm is still not available due to experimental challenges. Here we show ballistic phonon transport prevails in the cross-plane direction of holey silicon from 35 to 200 nm. The thermal conductivity scales linearly with the length (thickness) even though the lateral dimension (neck) is as narrow as 20 nm. We assess the impact of long-wavelength phonons and predict a transition from ballistic to diffusive regime using scaling models. Our results support strong persistence of long-wavelength phonons in nanostructures and are useful for controlling phonon transport for thermoelectrics and potential phononic applications.