Polydopamine-Induced Multilevel Engineering of Regenerated Silk Fibroin Fiber for Photothermal Conversion.

Solid photothermal materials with favorable biocompatibility and modifiable mechanical properties demonstrate obvious superiority and growing demand. In this work, polydopamine (PDA) induced functionalization of regenerated silk fibroin (RSF) fibers has satisfactory photothermal conversion ability and flexibility. Based on multilevel engineering, RSF solution containing PDA nanoparticles is wet spun to PDA-incorporating RSF (PDA@RSF) fibers, and then the fibers are coated with PDA via oxidative self-polymerization of dopamine to form PDA@RSF-PDA (PRP) fibers. During the wet spinning process, PDA is to adjust the mechanical properties of RSF by affecting its hierarchical structure. Meanwhile, coated PDA gives the PRP fibers extensive absorption of near-infrared light and sunlight, which is further fabricated into PRP fibrous membranes. The temperature of PRP fibrous membranes can be adjusted and increases to about 50 °C within 360 s under 808 nm laser irradiation with a power density of 0.6 W cm-2 , and PRP fibrous membranes exhibit effective photothermal cytotoxicity both in vitro and in vivo. Under the simulated sunlight, the temperature of PRP fiber increases to more than 200 °C from room temperature and the material can generate 4.5 V voltage when assembled with a differential thermal battery, which means that the material also has the potential for flexible wearable electronic devices.

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2.

A portable sensor for visual monitoring of Fe2+ and H2O2, two-dimensional Co3O4 modified by nano-IrO2 (IrO2@2D Co3O4) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO2@2D Co3O4 possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe2+ and H2O2 could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO2@2D Co3O4 dispersion and its functionalized test strips. The linear regression equations were A652 = 0.5940 - 0.00041 cFe2+ (10-8 M, R2 = 0.9927) for Fe2+ and ∆A652 = 0.0023 cH2O2 + 0.00025 (10-7 M, R2 = 0.9982) for H2O2, respectively. When applied to visual monitoring of aqueous Fe2+ and intercellular H2O2, the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10-8 mol/L and 1.02 × 10-7 mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO2@2D Co3O4 and its selective responses to Fe2+ and H2O2 were investigated in detail.

Reinforcement of Silk Microneedle Patches for Accurate Transdermal Delivery.

Microneedles (MNs) have attracted considerable attention in the pharmaceutical field as a minimally invasive delivery alternative to hypodermic needles. Current material systems of MNs have gradually shifted from metals, ceramics, and silicon to polymer in consideration of toughness and drug loading capacity. Silk fibroin (SF) is considered one of the most promising alternatives because it combines the ability to maintain the activity of biomolecules, adjustable mechanical strength, and excellent biocompatibility. However, the strength and hardness of SF MNs need to be carefully optimized to ensure skin epidermis penetration and controlled drug release, which are rarely explored in reported works. Here, the synergistic effect of glutaraldehyde-based cross-linking and water vapor annealing post-treatment is presented as an effective method to promote the formation of SF molecular networks and the mechanical strength of SF MNs. Moreover, the reinforced MN substrate is coated with a drug-loaded SF layer with low crystallinity. The drug release experiments demonstrate the successful controlled release of rhodamine B, horseradish peroxidase, and tetracycline, which suggests the great potential in the application of vaccine, antibiosis, cosmetology, and so forth.

From Molecular Reconstruction of Mesoscopic Functional Conductive Silk Fibrous Materials to Remote Respiration Monitoring.

Turning insulating silk fibroin materials into conductive ones turns out to be the essential step toward achieving active silk flexible electronics. This work aims to acquire electrically conductive biocompatible fibers of regenerated Bombyx mori silk fibroin (SF) materials based on carbon nanotubes (CNTs) templated nucleation reconstruction of silk fibroin networks. The electronical conductivity of the reconstructed mesoscopic functional fibers can be tuned by the density of the incorporated CNTs. It follows that the hybrid fibers experience an abrupt increase in conductivity when exceeding the percolation threshold of CNTs >35 wt%, which leads to the highest conductivity of 638.9 S m-1 among organic-carbon-based hybrid fibers, and 8 times higher than the best available materials of the similar types. In addition, the silk-CNT mesoscopic hybrid materials achieve some new functionalities, i.e., humidity-responsive conductivity, which is attributed to the coupling of the humidity inducing cyclic contraction of SFs and the conductivity of CNTs. The silk-CNT materials, as a type of biocompatible electronic functional fibrous material for pressure and electric response humidity sensing, are further fabricated into a smart facial mask to implement respiration condition monitoring for remote diagnosis and medication.

Ultrastable, highly luminescent quantum dot composites based on advanced surface manipulation strategy for flexible lighting-emitting.

Although quantum dots (QDs) have remarkable potential application in flexible light emitting diodes (LED), the loss of solvent-protected QDs leads to low quantum yield (QY) and poor stability, severely restricting the development. Flexible QD LEDs (Q-LEDs) with three primary colors were fabricated by mixing CdS/ZnS, CdSe@ZnS/ZnS, and CdSe/CdS QDs with polydimethylsiloxane (PDMS) by in situ hydrosilylation based surface manipulation strategy, which endows the device with highly ultrastable and luminescent performance. The surface manipulation strategy mainly includes the control of solvent dosage, purification times of QDs, concentration of QDs in PDMS, and oxidation on the preparation process of the QDs and PDMS composites. The highest QY of CdSe@ZnS/ZnS-PDMS composite is 82.03%, higher than the QY (80%) of the QD solution. After UV bleaching, organic solvents (acetone, ethanol and water), and heating treatment, the QYs of the QDs and PDMS maintain a high value, manifesting their good stability. Q-LED hybrid light-emitting devices were further fabricated by a molding technique demonstrating satisfied current and thermal stability. Flexible Q-LEDs can be expended to other shapes, such as fibers and blocks, indicating the huge potential of QD-polymer composites for light sources and displays etc.

The role of unfolded protein response and ER-phagy in quantum dots-induced nephrotoxicity: an in vitro and in vivo study.

Unfolded protein response (UPR) and endoplasmic reticulum (ER)-phagy are essential for cell homeostasis. Quantum dots (QDs), which have been widely used for biomedical applications, can accumulate in the kidney tissues and may cause renal dysfunction. However, the molecular mechanism of QDs-induced nephrotoxicity is still obscure. The present study was aimed to elucidate the role and mechanism of UPR and ER-phagy in QDs-induced nephrotoxicity. Herein, human embyronic kidney (HEK) cells were exposed to 15, 30, 45, and 60 nM cadmium telluride (CdTe)-QDs for 12 and 24 h. And CdTe-QDs (30-60 nM) inhibited the HEK cell viability. The clathrin-dependent endocytosis was determined as the main pathway of CdTe-QDs cellular uptake. Within cells, CdTe-QDs disrupted ER ultrastructure and induced UPR and FAM134B-dependent ER-phagy. Blocking UPR with inhibitors or siRNA rescued the FAM134B-dependent ER-phagy, which was triggered by CdTe-QDs. Moreover, suppression of UPR or FAM134B-dependent ER-phagy restored the cell vability. In vivo, mice were intravenously injected with 8 and 16 nmol/kg body weight CdTe-QDs for 24 h. Kidney was shown as one of highest distributed organs of CdTe-QDs, resulting in renal dysfunction, as well as UPR and FAM134B-dependent ER-phagy in it. Thus, for the first time, we demonstrated that ER-phagy can be triggered by nanomaterials both in vitro and in vivo. In addition, blocking of UPR and ER-phagy showed protective effects against CdTe-QDs-induced toxicity in kideny cells. Notably, a secreted alkaline phosphatase reporter gene system has been developed as a sensitive and rapid method for evaluating the ER quality under the exposure of nanomaterials.

Mesoscopic-Functionalization of Silk Fibroin with Gold Nanoclusters Mediated by Keratin and Bioinspired Silk Synapse.

Silk fibroin (SF) offers great opportunities in manufacturing biocompatible/partially biodegradable devices with environmental benignity and biomedical applications. To obtain active SF devices of next generation, this work is to demonstrate a new functionalization strategy of the mesoscopic functionalization for soft materials. Unlike the atomic functionalization of solid materials, the meso-functionalization is to incorporate meso-dopants, i.e., functional molecules or nanomaterials, quantum dots, into the mesoscopic networks of soft materials. In this work, wool keratin (WK) molecules were adopted as mediating molecules to incorporate gold nanoclusters (AuNCs), into the mesoscopic networks of SF. It follows from our analyses that the ß-crystallites between WK and SF molecules establish the binding between WK@AuNCs and the SF networks. The incorporated WK@AuNCs are electron rich and serve as electronically charged nano particles to bridge the growth of Ag filaments in bio-degradable WK@AuNCs-SF memristors. The meso-functionalization can greatly enhance the performance of SF materials and endows them with new functionalities. This can be highlighted by biocompatible/partly degradable WK@AuNCs functionalized SF resistive random-access memories, having the enhanced resistive switching memory performance, and the unique synapse characteristics and the capability of synapse learning compared with neat SF devices, and of great importance in nonvolatile memory, analog circuits, and neuromorphic applications.

Correction: Correlation between hierarchical structure of crystal networks and macroscopic performance of mesoscopic soft materials and engineering principles.

Correction for 'Correlation between hierarchical structure of crystal networks and macroscopic performance of mesoscopic soft materials and engineering principles' by Naibo Lin et al., Chem. Soc. Rev., 2015, DOI: .

Correlation between hierarchical structure of crystal networks and macroscopic performance of mesoscopic soft materials and engineering principles.

This review examines how the concepts and ideas of crystallization can be extended further and applied to the field of mesoscopic soft materials. It concerns the structural characteristics vs. the macroscopic performance, and the formation mechanism of crystal networks. Although this subject can be discussed in a broad sense across the area of mesoscopic soft materials, our main focus is on supramolecular materials, spider and silkworm silks, and biominerals. First, the occurrence of a hierarchical structure, i.e. crystal network and domain network structures, will facilitate the formation kinetics of mesoscopic phases and boost up the macroscopic performance of materials in some cases (i.e. spider silk fibres). Second, the structure and performance of materials can be correlated in some way by the four factors: topology, correlation length, symmetry/ordering, and strength of association of crystal networks. Moreover, four different kinetic paths of crystal network formation are identified, namely, one-step process of assembly, two-step process of assembly, mixed mode of assembly and foreign molecule mediated assembly. Based on the basic mechanisms of crystal nucleation and growth, the formation of crystal networks, such as crystallographic mismatch (or noncrystallographic) branching (tip branching and fibre side branching) and fibre/polymeric side merging, are reviewed. This facilitates the rational design and construction of crystal networks in supramolecular materials. In this context, the (re-)construction of a hierarchical crystal network structure can be implemented by thermal, precipitate, chemical, and sonication stimuli. As another important class of soft materials, the unusual mechanical performance of spider and silkworm silk fibres are reviewed in comparison with the regenerated silk protein derivatives. It follows that the considerably larger breaking stress and unusual breaking strain of spider silk fibres vs. silkworm silk fibres can be interpreted according to the synergistically correlated hierarchical structures of the domain and crystal networks, which can be quantified by the hierarchical structural correlation and the four structural parameters. Based on the concept of crystal networks, the new understanding acquired will transfer the research and engineering of mesoscopic materials, particularly, soft functional materials, to a new phase.

Engineering of fluorescent emission of silk fibroin composite materials by material assembly.

This novel materials assembly technology endows the designated materials with additional/enhanced performance by fixing "functional components" into the materials. Such functional components are molecularly recognized and accommodated by the designated materials. In this regard, two-photon fluorescence (TPF) organic molecules and CdTe quantum dots (QDs) are adopted as functional components to functionalize silk fibers and films. TPF organic molecules, such as, 2,7-bis[2-(4-nitrophenyl) ethenyl]-9,9-dibutylfluorene (NM), exhibit TPF emission quenching because of the molecular stacking that leads to aggregation in the solid form. The specific recognition between -NO2 in the annealed fluorescent molecules and the -NH groups in the silk fibroin molecules decouples the aggregated molecules. This gives rise to a significant increase in the TPF quantum yields of the silk fibers. Similarly, as another type of functional components, CdTe quantum dots (QDs) with different sizes were also adopted in the silk functionalization method. Compared to QDs in solution the fluorescence properties of functionalized silk materials display a long stability at room temperature. As the functional materials are well dispersed at high quantum yields in the biocompatible silk a TPF microscope can be used to pursue 3D high-resolution imaging in real time of the TPF-silk scaffold.

Crystal networks in silk fibrous materials: from hierarchical structure to ultra performance.

This review provides a comprehensive survey of the structural characteristics of crystal networks of silk soft fibrous materials in correlation with the macroscopic properties/performance and the network formation mechanisms. The correlation between the hierarchical mesoscopic structures and the mechanical properties of silk soft fibrous materials including silk fibroin hydrogels and naturally spun silk fibers are addressed based on the hierarchical crystal network models. Namely, two types of hierarchical networks are identified: the weak nanofibril-nanofibril interaction case (i.e., silk fibroin hydrogels), and the strong nanofibril-nanofibril interaction case (i.e., silk fibers). The macroscopic properties, i.e., the rheological/mechanical properties, can be controlled in terms of tuning different levels of hierarchical network structures by ultrasonication-induced gelation, introducing the initial nucleation centers, etc. Such controls take effect by different mesoscale assembly pathways, which are found to occur via different routes of the nucleation and growth processes. Furthermore, the hierarchical network model of soft fibrous materials can be applied to explain the superior mechanical properties and the unique strain-hardening behaviors of spider silk fibers within the framework of hierarchical breaking mechanism. Obviously, a knowledge of crystal networks will allow the prediction of the performance and engineering strategy of silk fibrous materials in generals.

Amino acid-based metallo-supramolecular nanoassemblies capable of regulating cellular redox homeostasis for tumoricidal chemo-/photo-/catalytic combination therapy.

Nanozymes, as nanomaterials with natural enzyme activities, have been widely applied to deliver various therapeutic agents to synergistically combat the progression of malignant tumors. However, currently common inorganic nanozyme-based drug delivery systems still face challenges such as suboptimal biosafety, inadequate stability, and inferior tumor selectivity. Herein, a super-stable amino acid-based metallo-supramolecular nanoassembly (FPIC NPs) with peroxidase (POD)- and glutathione oxidase (GSHOx)-like activities was fabricated via Pt4+-driven coordination co-assembly of l-cysteine derivatives, the chemotherapeutic drug curcumin (Cur), and the photosensitizer indocyanine green (ICG). The superior POD- and GSHOx-like activities could not only catalyze the decomposition of endogenous hydrogen peroxide into massive hydroxyl radicals, but also deplete the overproduced glutathione (GSH) in cancer cells to weaken intracellular antioxidant defenses. Meanwhile, FPIC NPs would undergo degradation in response to GSH to specifically release Cur, causing efficient mitochondrial damage. In addition, FPIC NPs intrinsically enable fluorescence/photoacoustic imaging to visualize tumor accumulation of encapsulated ICG in real time, thereby determining an appropriate treatment time point for tumoricidal photothermal (PTT)/photodynamic therapy (PDT). In vitro and in vivo findings demonstrated the quadruple orchestration of catalytic therapy, chemotherapeutics, PTT, and PDT offers conspicuous antineoplastic effects with minimal side reactions. This work may provide novel ideas for designing supramolecular nanoassemblies with multiple enzymatic activities and therapeutic functions, allowing for wider applications of nanozymes and nanoassemblies in biomedicine.

A Matrix-Metalloproteinase-Responsive Hydrogel System for Modulating the Immune Microenvironment in Myocardial Infarction.

Injectable hydrogels carrying therapeutic factors to modulate the infarct immune microenvironment show great potential in the treatment of myocardial infarction (MI). However, conventional injectable hydrogels release therapeutic factors in an uncontrolled manner, which leads to poor treatment efficacy and acute side effects on normal tissues. In this work, a matrix metalloproteinase (MMP)2/9-responsive hydrogel system (MPGC4) is developed, considering the characteristics of the post-MI microenvironment. MPGC4 consists of tetra-poly(ethylene glycol) (PEG) hydrogels and a composite gene nanocarrier (CTL4) that is composed of carbon dots (CDots) coupled with interleukin-4 plasmid DNA via electrostatic interactions. MPGC4 can be automatically triggered to release CTL4 on demand after MI to regulate the infarct immune microenvironment. In addition, due to the photoluminescence properties of CDots, a large amount of viscoelastic MPGC4 is found to be retained in situ after injection into the infarct region without leakage. The in vitro results demonstrate that CTL4 promotes proinflammatory M1 macrophage polarization to the anti-inflammatory M2 subtype and contributes to cardiomyocyte survival through macrophage transition. In a rat model of MI, MPGC4 clears MMPs and precisely targets CTL4 to the infarcted region. In particular, MPGC4 improves cardiac function by modulating macrophage transition to reduce early inflammatory responses and proangiogenic activity.

Silk fibroin based wearable electrochemical sensors with biomimetic enzyme-like activity constructed for durable and on-site health monitoring.

Flexible biomimetic sensors have encountered a bottleneck of sensitivity and durability, as the sensors must directly work within complex body fluid with ultra-trace biomarkers. In this work, a wearable electrochemical sensor on a modified silk fibroin substrate is developed using gold nanoparticles hosted into N-doped porous carbonizated silk fibroin (AuNPs@CSF) as active materials. Taking advantage of the inherent biocompatibility and flexibility of CSF, and the high stability and enzyme-like catalytic activity of AuNPs, AuNPs@CSF-based sensor exhibits durable stability and superior sensitivity to monitor H2O2 released from cancer cell (4T1) and glucose in sweat. The detection limits for H2O2 and glucose are low to be 1.88 µM and 23 µM respectively, and the sensor can be applied in succession within 30 days at room temperature. Further, physical cross-linking of polyurethane (PU) with SF well matches with the skin tissue mechanically and provides a flexible, robust and stable electrode-tissue interface. AuNPs@CSF is applied successfully for wearable electrochemical monitoring of glucose in human sweat.The present AuNPs@CSF will possess a potential application in clinical diagnosing of H2O2- or glucose-related diseases in future.

Bioinspired Conductive Enhanced Polyurethane Ionic Skin as Reliable Multifunctional Sensors.

Ionogels prepared from ionic liquid (IL) have the characteristics of nonevaporation and stable performance relative to traditional hydrogels. However, the conductivities of commonly used ionogels are at very low relative to traditional hydrogels because the large sizes of the cation and anion in an IL impedes ion migration in polymer networks. In this study, ultradurable ionogels with suitable mechanical properties and high conductivities are prepared by impregnating IL into a safe, environmentally friendly water-based polyurethane (WPU) network by mimicking the ion transport channels in the phospholipid bilayer of the cell membrane. The increase in electrical conductivity is attributed to the introduction of carboxylic acid in the hard segment of WPU; this phenomenon regularly arranges hard segment structural domains by hydrogen bonding, forming ionic conduction channels. The conductivities of their ionogels are >28-39 mS cm-1 . These ionogels have adjustable mechanical properties that make the Young's modulus value (0.1-0.6 MPa) similar to that of natural skin. The strain sensor has an ultrahigh sensitivity that ranges from 0.99 to 1.35, with a wide sensing range of 0.1%-200%. The findings are promising for various ionotronics requiring environmental stability and high conductivity characteristics.

Biomimetic synthesis of 2D ultra-small copper sulfide nanoflakes based on reconfiguration of the keratin secondary structure for cancer theranostics in the NIR-II region.

Two-dimensional transition metal dichalcogenides have attracted widespread attention in cancer theranostics due to their high specific surface area and excellent photothermal conversion properties. However, their dimensions and biodegradability have limited the exploration of the therapeutic properties of transition metal dichalcogenides. Herein, we explore the mechanism of the keratin α-helix-to-random coil transition, as an actuation mechanism for the controllable design and precise synthesis of two-dimension copper sulfide nanoflakes (CuS NFs) with high absorption in the NIR-II window. Upon mixing keratin and Cu2+, the hydrogen bonds that maintain the α-helix are broken by copper ions to form biuret coordination, while the structure of the α-helix is transformed into a random coil, providing a more scalable space for the growth of CuS NFs. The CuS NFs prepared in this way possess the great advantages of outstanding uniformity, size controllability, and biodegradability. Importantly, the CuS NFs in the NIR-II window show an excellent photothermal conversion efficiency (32.9%) and extraordinary photoacoustic signal. This work updates the fabrication of two-dimensional transition metal dichalcogenides and greatly enhances their competitiveness in the area of cancer theranostics in the NIR-II region, and provides significant theoretical and practical opportunities for the development of keratin using biomimetic synthesis.

Autonomous Bionanorobots via a Cage-Shaped Silsesquioxane Vehicle for In Vivo Heavy Metal Detoxification.

Nanorobots hold great promise for integrated drug delivery systems that are responsive to molecular triggers. Herein, we successfully developed an automatic smart bionanorobot that has transport capability and recognizes and removes zinc ions from poisoned cells based on nanoscale polyhedral oligomeric silsesquioxane molecules. This intelligent bionanorobot can easily move inside and outside the cell and find zinc ions owing to its highly selective recognition to zinc ions and high cell permeability, especially the well-combined high penetration and strong binding energy. More importantly, it was also found that this intelligent bionanorobot can restore round HeLa cells to a normal fusiform cell morphology following high-concentration zinc treatment and does not interfere with cell proliferation and division. It was also shown by in vivo experiments that the bionanorobot can inhibit persistent enlargement of the liver caused by zinc ion poisoning.

Phycocyanin - carbon dots nanoprobe for the ratiometric fluorescence determination of peroxynitrite.

As a kind of reactive oxygen species, peroxynitrite is related to various diseases closely such as cancer and neurodegenerative diseases. Constructing probes with highly specific ability and a wide linear detection range for peroxynitrite detection is crucial for understanding the pathogenesis of related diseases and optimizing treatments. In this work, we developed a novel luminescent ratiometric fluorescence nanoprobe (PC-CDs) based on carbon dots and phycocyanin. PC-CDs are constructed by amidation reaction between carbon dots and phycocyanin. The nanoprobe we obtained has a good ability of distinguishing peroxynitrite from other reactive oxygen species and interfering substances. Moreover, the linear range of the nanoprobe is 0.5-100 µM and the limit of detection is 0.5 µM when detecting peroxynitrite. In the spiked recovery experiments under phosphate buffered saline (PBS) environment, our nanoprobe has a good recovery performance and the recovery is 99% - 104%, which will be beneficial to the further development of peroxynitrite testing and the research progress of related diseases. Finally, we discuss the quenching mechanism of peroxynitrite for nanoprobe, and found that there is the combination of dynamic and static quenching in the quenching process.

Fast dopamine detection based on evanescent wave detection platform.

A compact evanescent wave detection platform (EWDP) is developed for the detection of fluorescence gold nanoclusters. The EWDP employs a simple optical system and a Si-based photodetector SOP-1000 assembly to improve the optical efficiency and detection sensitivity. A microfluidic sample cell is also used to decrease the amount of analyte to 200 µL (The volume of sample cell is really about 30 µL). On this basis, we design a strategy for detecting dopamine (DA) based on the photoinduced electron transfer (PET) quenching mechanism. By introduction of tyrosinase (TYR) during the detection, the testing time is shortened to 1 min. The fluorescence emission signal decreased dramatically and the quenching ratio (F0-F)/F0 is linearly related to the concentration of DA in the range of 0.03-60 µM with a detection limit of 0.03 µM. Additionally, this detection platform has potential applications for DA fast detection in the microsamples.

Biomimetic Salinity Power Generation Based on Silk Fibroin Ion-Exchange Membranes.

Powering implanted medical devices (IMDs) is a long-term challenge since their use in biological environments requires a long-term and stable supply of power and a biocompatible and biodegradable battery system. Here, silk fibroin-based ion-exchange membranes are developed using bionics principles for reverse electrodialysis devices (REDs). Silk fibroin nanofibril (SNF) membranes are negatively and positively modified, resulting in strong cation and anion selectivity that regulates ion diffusion to generate electric power. These oppositely charged SNF membranes are assembled with Ag/AgCl electrodes into a multicompartment RED. By filling them with 10 and 0.001 mM NaCl solutions, a maximum output power density of 0.59 mW/m2 at an external loading resistance of 66 kΩ is obtained. In addition, 10 pairs of SNF membranes produce a considerable voltage of 1.58 V. This work is a proof of concept that key components of battery systems can be fabricated with protein materials. Combined with the emergence of water-based battery technologies, the findings in this study provide insights for the construction of tissue-integrated batteries for the next generation of IMDs.