Layer by layer assembly of biotinylated protein networks for signal amplification.

Described herein is a unique and inexpensive method that outperforms commercial methods that amplify the streptavidin-biotin recognition event. Amplification induced by streptavidin and biotinylated protein causes the formation of a large detectable polymer. This approach enjoys a 100-fold decrease in detection limit in comparison with the commercial methods.

Dithienocyclopentathieno[3,2-b]thiophene hexacyclic arene for solution-processed organic field-effect transistors and photovoltaic applications.

We have developed a ladder-type dithienocyclopentathieno[3,2-b]thiophene (DTCTT) hexacyclic unit in which the central thieno[3,2-b]thiophene ring was covalently fastened to two adjacent thiophene rings through carbon bridges, thereby forming two connected cyclopentadithiophene (CPDT) units in a hexacyclic coplanar structure. This stannylated Sn-DTCTT building block was copolymerized with three electron-deficient acceptors, dibromo-thieno[3,4-c]pyrrole-4,6-dione (TPD), dibromo-benzothiadiazole (BT), and dibromo-phenanthrenequinoxaline (PQX), by Stille polymerization, thereby furnishing a new class of alternating donor-acceptor copolymers: PDTCTTTPD, PDTCTTBT, and PDTCTTPQX, respectively. Field-effect transistors based on PDTCTTPQX and PDTCTTBT yielded high hole mobilities of 0.017 and 0.053 cm(2) V(-1) s(-1), respectively, which are among the highest performances among amorphous donor-acceptor copolymers. A bulk heterojunction solar cell that incorporated PDTCTTTPD with the lower-lying HOMO energy level delivered a higher V(oc) value of 0.72 V and a power conversion efficiency (PCE) value of 2.59%.

A pentacyclic nitrogen-bridged thienyl-phenylene-thienyl arene for donor-acceptor copolymers: synthesis, characterization, and applications in field-effect transistors and polymer solar cells.

A pentacyclic benzodipyrrolothiophene (BDPT) unit, in which two outer thiophene rings are covalently fastened with the central phenylene ring by nitrogen bridges, was synthesized. The two pyrrole units embedded in BDPT were constructed by using one-pot palladium-catalyzed amination. The coplanar stannylated Sn-BDPT building block was copolymerized with electron-deficient thieno[3,4-c]pyrrole-4,6-dione (TPD), benzothiadiazole (BT), and dithienyl-diketopyrrolopyrrole (DPP) acceptors by Stille polymerization. The bridging nitrogen atoms make the BDPT motif highly electron-abundant and structurally coplanar, which allows for tailoring the optical and electronic properties of the resultant polymers. Strong photoinduced charge-transfer with significant band-broadening in the solid state and relatively higher oxidation potential are characteristic of the BDPT-based polymers. Poly(benzodipyrrolothiophene-alt-benzothiadiazole) (PBDPTBT) achieved the highest field-effect hole mobility of up to 0.02 cm(2) V(-1) s(-1). The photovoltaic device using the PBDPTBT/PC(71)BM blend (1:3, w/w) exhibited a V(oc) of 0.6 V, a J(sc) of 10.34 mA cm(-2), and a FF of 50%, leading to a decent PCE of 3.08%. Encouragingly, the device incorporating poly(benzodipyrrolothiophene-alt-thienopyrrolodione) (PBDPTTPD)/PC(71)BM (1:3, w/w) composite delivered a highest PCE of 3.72%. The enhanced performance arises from the lower-lying HOMO value of PBDPTTPD to yield a higher V(oc) of 0.72 V.