Purification and enzymatic properties of a new thermostable endoglucanase from Aspergillus oryzae HML366.

Aspergillus oryzae HML366 is a newly screened cellulase-producing strain. The endoglucanase HML ED1 from A. oryzae HML366 was quickly purified by a two-step method that combines ammonium sulfate precipitation and strong anion exchange column. SDS-PAGE electrophoresis indicated that the molecular weight of the enzyme was 68 kDa. The optimum temperature of the purified endoglucanase was 60 ℃ and the enzyme activity was stable below 70 ℃. The optimum pH was 6.5, and the enzyme activity was stable at pH between 4.5 and 9.0. The analysis indicated that additional Na+, K+, Ca2+, and Zn2+ reduced the catalytic ability of enzyme to the substrate, but Mn2+ enhanced its catalytic ability to the substrate.The Km and Vmax of the purified endoglucanase were 8.75 mg/mL and 60.24 µmol/min·mg, respectively. In this study, we report for the first time that A. oryzae HML366 can produce a heat-resistant and wide pH tolerant endoglucanase HML ED1, which has potential industrial application value in bioethanol, paper, food, textile, detergent, and pharmaceutical industries.

Purification and Enzymatic Properties of a Difunctional Glycoside Hydrolase from Aspergillus oryzae HML366.

In the study, an extracellular enzyme HML CBH1 was purified from the fermentation solution of Aspergillus oryzae HML366, and characterized by biological and molecular analysis. Following the culturing of A. oryzae HML366 under the optimized conditions for enzyme production, an enzyme named HML CBH1 with a molecular weight of 48 kDa was purified using 3000 Da cellulose ultrafiltration column and anion exchange chromatography. The specific activity of the purified enzyme was 9.65 U/mg, and the optimum temperature and pH for the enzyme were 50 and 5.0 °C, respectively. The enzyme was stable at temperatures below 60 °C and pH ranging from 3.0 to 10.0. The partial amino acid sequence of HML CBH1 was analyzed by time-of-flight mass spectrometry, and Mascot and Blast analysis showed that the HML CBH1 sequence was identical to the protein gi:22138643, belonging to the glycoside hydrolase family 7, and had exoglucanase and endoglucanase activity.

The Effect of Rhenium Content on Microstructural Changes and Irradiated Hardening in W-Re Alloy under High-Dose Ion Irradiation.

An amount of 100 dpa Si2+ irradiation was used to study the effect of transmutation rhenium content on irradiated microscopic defects and hardening in W-xRe (x = 0, 1, 3, 5 and 10 wt.%) alloys at 550 °C. The increase in Re content could significantly refine the grain in the W-xRe alloys, and no obvious surface topography change could be found after high-dose irradiation via the scanning electron microscope (SEM). The micro defects induced by high-dose irradiation in W and W-3Re alloys were observed using a transmission electron microscope (TEM). Dislocation loops with a size larger than 10 nm could be found in both W and W-3Re alloy, but the distribution of them was different. The distribution of the dislocation loops was more uniform in pure W, while they seemed to be clustered around some locations in W-3Re alloy. Voids (~2.4 nm) were observed in W-3Re alloy, while no void was investigated in W. High-dose irradiation induced obvious hardening with the hardening rate between 75% and 155% in all W-xRe alloys, but W-3Re alloy had the lowest hardening rate (75%). The main reasons might be related to the smallest grain size in W-3Re alloy, which suppressed the formation of defect clusters and induced smaller hardening than that in other samples.

Identification and characterization of a novel fumarase gene by metagenome expression cloning from marine microorganisms.

BACKGROUND: Fumarase catalyzes the reversible hydration of fumarate to L-malate and is a key enzyme in the tricarboxylic acid (TCA) cycle and in amino acid metabolism. Fumarase is also used for the industrial production of L-malate from the substrate fumarate. Thermostable and high-activity fumarases from organisms that inhabit extreme environments may have great potential in industry, biotechnology, and basic research. The marine environment is highly complex and considered one of the main reservoirs of microbial diversity on the planet. However, most of the microorganisms are inaccessible in nature and are not easily cultivated in the laboratory. Metagenomic approaches provide a powerful tool to isolate and identify enzymes with novel biocatalytic activities for various biotechnological applications. RESULTS: A plasmid metagenomic library was constructed from uncultivated marine microorganisms within marine water samples. Through sequence-based screening of the DNA library, a gene encoding a novel fumarase (named FumF) was isolated. Amino acid sequence analysis revealed that the FumF protein shared the greatest homology with Class II fumarate hydratases from Bacteroides sp. 2_1_33B and Parabacteroides distasonis ATCC 8503 (26% identical and 43% similar). The putative fumarase gene was subcloned into pETBlue-2 vector and expressed in E. coli BL21(DE3)pLysS. The recombinant protein was purified to homogeneity. Functional characterization by high performance liquid chromatography confirmed that the recombinant FumF protein catalyzed the hydration of fumarate to form L-malate. The maximum activity for FumF protein occurred at pH 8.5 and 55°C in 5 mM Mg(2+). The enzyme showed higher affinity and catalytic efficiency under optimal reaction conditions: K(m) = 0.48 mM, V(max) = 827 µM/min/mg, and k(cat)/K(m) = 1900 mM/s. CONCLUSIONS: We isolated a novel fumarase gene, fumF, from a sequence-based screen of a plasmid metagenomic library from uncultivated marine microorganisms. The properties of FumF protein may be ideal for the industrial production of L-malate under higher temperature conditions. The identification of FumF underscores the potential of marine metagenome screening for novel biomolecules.

One-step purification of two novel thermotolerant ß-1,4-glucosidases from a newly isolated strain of Fusarium chlamydosporum HML278 and their characterization.

A newly identified cellulase-producing Fusarium chlamydosporum HML278 was cultivated under solid-state fermentation of sugarcane bagasse, and two new ß-glucosides enzymes (BG FH1, BG FH2) were recovered from fermentation solution by modified non-denaturing active gel electrophoresis and gel filtration chromatography. SDS-PAGE analysis showed that the molecular weight of BG FH1 and BG FH2 was 93 kDa and 52 kDa, respectively, and the enzyme activity was 5.6 U/mg and 11.5 U/mg, respectively. The optimal reaction temperature of the enzymes was 60 ℃, and the enzymes were stable with a temperature lower than 70 ℃. The optimal pH of the purified enzymes was 6.0, and the enzymes were stable between pH 4-10. Km and Vmax values ​​were 2.76 mg/mL and 20.6 U/mg for pNPG, respectively. Thin-layer chromatography and high-performance liquid chromatography analysis showed that BG FH1and BG FH2 had hydrolysis activity toward cellobiose and could hydrolyze cellobiose into glucose. In addition, both enzymes exhibited transglycoside activity, which could use glucose to synthesize cellobiose and cellotriose, and preferentially synthesize alcohol. In conclusion, our study demonstrated that F. chlamydosporum HML278 produces heat-resistant ß-glucosidases with both hydrolytic activity and transglycosidic activity, and these ß-glucosidases have potential application in bioethanol and papermaking industries.

Biochemical characterization of two novel ß-glucosidase genes by metagenome expression cloning.

Two novel ß-glucosidase genes designated as bgl1D and bgl1E, which encode 172- and 151-aa peptides, respectively, were cloned by function-based screening of a metagenomic library from uncultured soil microorganisms. Sequence analyses indicated that Bgl1D and Bgl1E exhibited lower similarities with some putative ß-glucosidases. Functional characterization through high-performance liquid chromatography demonstrated that purified recombinant Bgl1D and Bgl1E proteins hydrolyzed D-glucosyl-ß-(1-4)-D-glucose to glucose. Using p-nitrophenyl-ß-D-glucoside as substrate, K(m) was 0.54 and 2.11 mM, and k(cat)/K(m) was 1489 and 787 mM(-1) min(-1) for Bgl1D and Bgl1E, respectively. The optimum pH and temperature for Bgl1D was pH 10.0 and 30°C, while the optimum values for Bgl1E were pH 10.0 and 25°C. Bgl1D exhibited habitat-specific characteristics, including higher activity in lower temperature and at high concentrations of AlCl(3) and LiCl. Bgl1D also displayed remarkable activity across a broad pH range (5.5-10.5), making it a potential candidate for industrial applications.