Functional Groups Assisted Tunable Dielectric Permittivity of Guest-Free Zn-Based Coordination Polymers for Gate Dielectrics.

The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH2 ) and electron-withdrawing (R=NO2 ) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L1 )(L2 )]n (1) and [Zn(L1 )(L3 )]n (2) [L1 =2-(2-pyridyl) benzimidazole (Pbim), L2 =5-aminoisophthalate (Aip), and L3 =5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1 kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1 kHz). The electron donating and withdrawing effects of the NH2 and NO2 substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO2 and NH2 . Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.

Isorecticular Synthesis of Dissectible Molecular Bamboo Tubes of Hexarhenium(I) Benzene-1,2,3,4,5,6-hexaolate Complexes.

A family of bamboo-like metal-organic nanotubes consisting of in situ synthesized macromolecular blocks (MB) is reported. The MBs are composed of six fac-(CO)3 Re cores, one benzene-1,2,3,4,5,6-hexaolate plate, and six pyridine-derivative pillar ligands, which have a doubly tri-legged geometry and can be mutually assembled, piece by piece. This entire system is characterized as a simple but precise supramolecular complexation of these macromolecular blocks and further introduces an archetypal approach to systematically constructing a tunable form of dissectible molecular bamboo tubes.

Cooperative effect of unsheltered amide groups on CO2 adsorption inside open-ended channels of a zinc(II)-organic framework.

A unique spatial arrangement of amide groups for CO2 adsorption is found in the open-ended channels of a zinc(II)-organic framework {[Zn4(BDC)4(BPDA)4]·5DMF·3H2O}n (1, BDC = 1,4-benzyl dicarboxylate, BPDA = N,N'-bis(4-pyridinyl)-1,4-benzenedicarboxamide). Compound 1 consists of 4(4)-sql [Zn4(BDC)4] sheets that are further pillared by a long linker of BPDA and forms a 3D porous framework with an α-Po 4(12)·6(3) topology. Remarkably, the unsheltered amide groups in 1 provide a positive cooperative effect on the adsorption of CO2 molecules, as shown by the significant increase in the CO2 adsorption enthalpy with increasing CO2 uptake. At ambient condition, a 1:1 ratio of active amide sites to CO2 molecules was observed. In addition, compound 1 favors capture of CO2 over N2. DFT calculations provided rationale for the intriguing 1:1 ratio of amide sorption sites to CO2 molecules and revealed that the nanochamber of compound 1 permits the slipped-parallel arrangement of CO2 molecules, an arrangement found in crystal and gas-phase CO2 dimer.

Regimented Charge Transport Phenomena in Semiconductive Self-Assembled Rhenium Nanotubes.

Photoconductivity, a crucial property, determines the potential of semiconductor materials for use in optoelectronic and photocatalytic device applications. The one-dimensional metal-organic nanotube semiconducting material [{Re(CO)3}6(bho)(phpy)6]n (MBT 1, where bho is benzene-1,2,3,4,5,6-hexaoate and phpy is 4-phenylpyridine) reported herein exhibits record photocurrent responses at a broad spectral range. MBT 1 is comprised of a unique nanotube structure that is composed of six rhenium sites, six 4-phenylpyridine ligands, and a benzene-1,2,3,4,5,6-hexaoate unit. The highly organized self-assembled molecular bamboo tube MBT 1 displays semiconducting characteristics with a low activation energy of 1.63 meV. The alternating current (AC) and direct current (DC) conductivities of pellet devices are approximately 10-4 S/cm. For a single-crystal device, DC conductivity was found to be 1.5 S/cm, an unprecedented 10 000 times higher. The bandgap of MBT 1 was determined to be 1.03 eV, consistent with the theoretically estimated value of 1.2 eV. Theoretical calculations suggest that the unique structural architecture of MBT 1 allows for effective charge transport, which is facilitated by the spatial separation of electrons and holes that MBT 1 contains. This also eliminates fast charge recombination. The findings are not only chemically and fundamentally important but also have great potential for applications in innovative nano-optoelectronics.

Water-assisted spin-flop antiferromagnetic behaviour of hydrophobic Cu-based metal-organic frameworks.

Solvent-dependent magnetism in Cu-based metal-organic frameworks (MOFs) is reported. Spin-flop magnetic behaviour occurs at different dehydrated states of MOFs. The oxygens of guest and coordinated water molecules are responsible as water removal tunes the coordination geometry around the Cu centre and the electronic structure of the framework.

Intrinsic Ultralow-Threshold Laser Action from Rationally Molecular Design of Metal-Organic Framework Materials.

Metal-organic frameworks (MOFs) are superior for multiple applications including drug delivery, sensing, and gas storage because of their tunable physiochemical properties and fascinating architectures. Optoelectronic application of MOFs is difficult because of their porous geometry and conductivity issues. Recently, a few optoelectronic devices have been fabricated by a suitable design of integrating MOFs with other materials. However, demonstration of laser action arising from MOFs as intrinsic gain media still remains challenging, even though some studies endeavor on encapsulating luminescence organic laser dyes into the porous skeleton of MOFs to achieve laser action. Unfortunately, the aggregation of such unstable laser dyes causes photoluminescence quenching and energy loss, which limits their practical application. In this research, unprecedently, we demonstrated ultralow-threshold (∼13 nJ/cm2) MOF laser action by a judicious choice of metal nodes and organic linkers during synthesis of MOFs. Importantly, we also demonstrated that the white random lasing from the beautiful microflowers of organic linkers possesses a porous network, which is utilized to synthesize the MOFs. The highly luminescent broad-band organic linker 1,4-NDC, which itself exhibits a strong white random laser, is used not only to achieve the stimulated emission in MOFs but also to reduce the lasing threshold. Such white lasing has multiple applications from bioimaging to the recently developed versatile Li-Fi technology. In addition, we showed that the smooth facets of MOF microcrystals can show Fabry-Perot resonant cavities having a high quality factor of ∼103 with excellent photostability. Our unique discovery of stable, nontoxic, high-performance MOF laser action will open up a new route for the development of new optoelectronic devices.

Publisher Correction: Rapid desolvation-triggered domino lattice rearrangement in a metal-organic framework.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Rapid desolvation-triggered domino lattice rearrangement in a metal-organic framework.

Topological transitions between considerably different phases typically require harsh conditions to collectively break chemical bonds and overcome the stress caused to the original structure by altering its correlated bond environment. In this work we present a case system that can achieve rapid rearrangement of the whole lattice of a metal-organic framework through a domino alteration of the bond connectivity under mild conditions. The system transforms from a disordered metal-organic framework with low porosity to a highly porous and crystalline isomer within 40 s following activation (solvent exchange and desolvation), resulting in a substantial increase in surface area from 725 to 2,749 m2 g-1. Spectroscopic measurements show that this counter-intuitive lattice rearrangement involves a metastable intermediate that results from solvent removal on coordinatively unsaturated metal sites. This disordered-crystalline switch between two topological distinct metal-organic frameworks is shown to be reversible over four cycles through activation and reimmersion in polar solvents.

An unprecedentedly huge square-grid copper(II)-organic framework material built from a bulky pyrene-derived elongated cross-shaped scaffold.

A new bulky pyrene-derived elongated cross-shaped organic scaffold was successfully incorporated into a highly porous, noninterpenetrated square-grid copper(II)-organic framework material with the unprecedentedly huge dimensions of 25.5 x 25.5 A(2), while the layer-to-layer NH...N interaction leads to a unique hydrogen-bonded 6(4).8(2)-nbo net.

Ground and excited electronic states of quininone-containing Re(I)-based rectangles: a comprehensive study of their preparation, electrochemistry, and photophysics.

The self-assembly of two rectangular compounds [{(CO)(3)Re(mu-QL)Re(CO)(3)}(2)(mu-bpy)(2)] (1, QL = 6,7-dimethyl 1,4-dioxido-9,10-anthraquinone (QL(1)); 2, QL = 1,4-dioxido-9,10-anthraquinone (QL(2)), bpy = 4,4'-bipyridine) via an orthogonal-bonding approach was achieved in high yields. Their structures were characterized by single-crystal X-ray diffraction analysis. The rectangles exhibited multielectron-redox properties. The introduction of a bridging quininone moiety made notable changes in two well-separated single-electron reductions of the bpy moiety, as compared with other 2,2'-bisbenzimidazolate (BiBzlm) or thiolate- or alkoxide-bridged rectangles, followed by quasi-reversible reduction of the quininone moiety to allow the existence of different redox states. Electrochemical assessment using cyclic voltammetry and UV-vis-NIR spectroelectrochemistry revealed reversibly accessible 0, 1-, and 2- redox states. The comproportionation constant of the successive reduction processes was K(c) = 4.18 x 10(8) for complex 1 and 4.08 x 10(8) for 2. In spite of the high K(c) values, no obvious intervalence charge transfer bands were detected in either the vis, NIR, or IR regions, suggesting very weak electronic coupling between the ligand centers in the mixed-valent intermediates. In the mixed-valent intermediate, the overlap between donor and acceptor orbitals of the two bpy ligands engendered weak electronic coupling associated with distance that exceeded van der Waals ligand/ligand distances and created a class I fully isolated, non-interacting, valence-localized situation. Furthermore, unusual ligand-to-metal-to-ligand charge-transfer (LMLCT) transitions of complexes 1 and 2 at 298 K were observed in the visible region. Molecule 2 exhibited multiple emissions from the triplet-centered pi-pi* intraligand ((3)IL), metal-to-ligand charge-transfer ((3)MLCT) and triplet ligand-ligand charge transfer ((3)LLCT) levels and showed biexponential decay. By contrast, in complex 1, (3)IL emission was absent and only single-exponential decay was observed. These results reveal the different nature of the electronically excited states between 1 and 2. The mechanisms of the photophysical deactivation processes in these systems can be explained in terms of the electronic characteristics of the quininone molecules and possible geometrical differences of the excited states involved. In addition, the energies, characteristics, and molecular structures of the ground and lowest triplet excited state were calculated using the density functional theory method.

Zr-MOF/Polyaniline Composite Films with Exceptional Seebeck Coefficient for Thermoelectric Material Applications.

Controlling the polymerization of aniline in the presence of zirconium-based metal-organic frameworks (Zr-MOFs) using polystyrene sulfonic acid as a dopant resulted in the formation of a new type of free-standing thermoelectric composite film. Polyaniline chains interpenetrate into the Zr-MOFs to enhance the crystallinity of polyaniline, resulting in an improved degree of electrical conductivity. In addition, the inherent porosity of the Zr-MOFs functions to suppress the increase in thermal conductivity, thus dramatically promoting a negative Seebeck coefficient. When 20 wt % Zr-MOF was used, a power factor of up to 664 µW/(m K2) was obtained, which was accompanied by a surprisingly large, negative Seebeck coefficient. The new class of MOF-based composites offers a new direction for developing new types of efficient thermoelectric materials.

Integration of a (-Cu-S-)n plane in a metal-organic framework affords high electrical conductivity.

Designing highly conducting metal-organic frameworks (MOFs) is currently a subject of great interest for their potential applications in diverse areas encompassing energy storage and generation. Herein, a strategic design in which a metal-sulfur plane is integrated within a MOF to achieve high electrical conductivity, is successfully demonstrated. The MOF {[Cu2(6-Hmna)(6-mn)]·NH4}n (1, 6-Hmna = 6-mercaptonicotinic acid, 6-mn = 6-mercaptonicotinate), consisting of a two dimensional (-Cu-S-)n plane, is synthesized from the reaction of Cu(NO3)2, and 6,6'-dithiodinicotinic acid via the in situ cleavage of an S-S bond under hydrothermal conditions. A single crystal of the MOF is found to have a low activation energy (6 meV), small bandgap (1.34 eV) and a highest electrical conductivity (10.96 S cm-1) among MOFs for single crystal measurements. This approach provides an ideal roadmap for producing highly conductive MOFs with great potential for applications in batteries, thermoelectric, supercapacitors and related areas.

Structural Transformations of Amino-Acid-Based Polymers: Syntheses and Structural Characterization.

A discrete complex [Zn(tpro)2(H2O)2] (1, Htpro = l-thioproline), and two structural isomers of coordination polymers, a 1D chain of [Zn(tpro)2]n (2) and a layered structure [Zn(tpro)2]n (3), were synthesized and characterized. The discrete complex 1 undergoes a temperature-driven structural transformation, leading to the formation of a 1D helical coordination polymer 2. Compound 3 is comprised of a 2D homochiral layer network with a (4,4) topology. These layers are mutually linked through hydrogen bonding interactions, resulting in the formation of a 3D network. When 1 is heated, it undergoes nearly complete conversion to the microcrystalline form, i.e., compound 2, which was confirmed by powder X-ray diffractions (PXRD). The carboxylate motifs could be activated after removing the coordinated water molecules by heating at temperatures of up to 150 °C, their orientations becoming distorted, after which, they attacked the activation sites of the Zn(II) centers, leading to the formation of a 1D helix. Moreover, a portion of the PXRD pattern of 1 was converted into the patterns corresponding to 2 and 3, and the ratio between 2 and 3 was precisely determined by the simulation study of in-situ synchrotron PXRD expriments. Consequently, such a 0D complex is capable of underdoing structural transformations and can be converted into 1D and/or 2D amino acid-based coordination polymers.

High-κ Samarium-Based Metal-Organic Framework for Gate Dielectric Applications.

The self-assembly of a samarium-based metal-organic framework [Sm2(bhc)(H2O)6]n (1) in good yield was achieved by reacting Sm(NO3)3·6H2O with benzenehexacarboxylic acid (bhc) in a mixture of H2O-EtOH under hydrothermal conditions. A structural analysis showed that compound 1 crystallized in a space group of Pnmn and adopted a 3D structure with (4,8) connected nets. Temperature dependent dielectric measurements showed that compound 1 behaves as a high dielectric material with a high dielectric constant (κ = 45.1) at 5 kHz and 310 K, which is comparable to the values for some of the most commonly available dielectric inorganic metal oxides such as Sm2O3, Ta2O5, HfO2, and ZrO2. In addition, electrical measurements of 1 revealed an electrical conductivity of about 2.15 × 10-7 S/cm at a frequency of 5 kHz with a low leakage current (Ileakage = 8.13 × 10-12 Amm-2). Dielectric investigations of the Sm-based MOF provide an effective path for the development of high dielectric materials in the future.

Benzene absorption in a protuberant-grid-type zinc(II)-organic framework triggered by the migration of guest water molecules.

The 2D protuberant-grid-type Zn(II)-organic framework consists of unusual racemic interdigitated bilayers and comprises a 3D intersecting channel system. The framework is thermally stable and the channels contain multiple water aggregates. Accompanying the migration of guest water molecules, only the specific channels in the bilayers along the b axis can easily and efficiently absorb guest benzene molecules in a regular manner.

Giant metal-organic frameworks with bulky scaffolds: from microporous to mesoporous functional materials.

New concepts on the design and synthesis of crystalline metal-organic frameworks (MOFs) have made them a subject of considerable interest in the growing field of materials science. By creating larger cavity sizes by a nearly infinite combination of metal nodes and organic linkers, many innovative characteristics of microporous MOFs have been revealed. The primary goal of this perspective article is to highlight the frontiers in the development of giant MOFs that are deliberately constructed from metallated or metal-free bulky scaffolds. Incorporating these types of distinct bulky ligands into giant MOFs may lead to MOFs with a large cavity size, intriguing properties and new framework topology. Emerging applications of these materials in catalysis, adsorption, and sensors are also discussed.