RESUMO
Non-invasive three-dimensional imaging of live rodents is a powerful research tool that has become critical for advances in many biomedical fields. For investigations into adipose development, obesity, or diabetes, accurate and precise techniques that quantify adiposity in vivo are critical. Because total body fat mass does not accurately predict health risks associated with the metabolic syndrome, imaging modalities should be able to stratify total adiposity into subcutaneous and visceral adiposity. Micro-computed tomography (micro-CT) acquires high-resolution images based on the physical density of the material and can readily discriminate between subcutaneous and visceral fat. Here, a micro-CT based method to image the adiposity of live rodents is described. An automated and validated algorithm to quantify the volume of discrete fat deposits from the computed tomography is available. Data indicate that scanning the abdomen provides sufficient information to estimate total body fat. Very high correlations between micro-CT determined adipose volumes and the weight of explanted fat pads demonstrate that micro-CT can accurately monitor site-specific changes in adiposity. Taken together, in vivo micro-CT is a non-invasive, highly quantitative imaging modality with greater resolution and selectivity, but potentially lower throughput, than many other methods to precisely determine total and regional adipose volumes and fat infiltration in live rodents.
Assuntos
Tecido Adiposo/diagnóstico por imagem , Gordura Intra-Abdominal/diagnóstico por imagem , Microtomografia por Raio-X/instrumentação , Microtomografia por Raio-X/métodos , Animais , Modelos Animais de Doenças , Processamento Eletrônico de Dados , Desenho de Equipamento , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Camundongos , Distribuição Normal , Obesidade/diagnóstico por imagem , Ratos , Fatores de TempoRESUMO
The age-induced decline in the body's ability to fight disease is exacerbated by obesity and metabolic disease. Using a mouse model of diet-induced obesity, the combined challenge of a high-fat diet and age on liver morphology and biochemistry was characterized, while evaluating the potential of 15 min per day of high frequency (90 Hz), extremely low-magnitude (0.2 G) mechanical signals (LMMS) to suppress lipid accumulation in the liver. Following a 36-week protocol (animals 43 weeks of age), suppression of hepatomegaly and steatosis was reflected by a 29% lower liver mass in LMMS animals as compared with controls. Average triglyceride content was 101.7+/-19.4 microg mg(-1) tissue in the livers of high-fat diet control (HFD) animals, whereas HFD+LMMS animals realized a 27% reduction to 73.8+/-22.8 microg mg(-1) tissue. In HFD+LMMS animals, liver free fatty acids were also reduced to 0.026+/-0.009 microEq mg(-1) tissue from 0.035+/-0.005 microEq mg(-1) tissue in HFD. Moderate to severe micro- and macrovesicular steatosis in HFD was contrasted to a 49% reduction in area covered by the vacuoles of at least 15 microm(2) in size in HFD+LMMS animals. These data provide preliminary evidence of the ability of LMMS to attenuate the progression of fatty liver disease, most likely achieved indirectly by suppressing adipogenesis and thus the total adipose burden through life, thereby reducing a downstream challenge to liver morphology and function.
Assuntos
Gorduras na Dieta/administração & dosagem , Fígado Gorduroso/prevenção & controle , Obesidade/etiologia , Animais , Fígado Gorduroso/etiologia , Metabolismo dos Lipídeos , Fígado/metabolismo , Masculino , Camundongos , Triglicerídeos/metabolismoRESUMO
Accurate and precise techniques that identify the quantity and distribution of adipose tissue in vivo are critical for investigations of adipose development, obesity, or diabetes. Here, we tested whether in vivo micro-computed tomography (microCT) can be used to provide information on the distribution of total, subcutaneous and visceral fat volume in the mouse. Ninety C57BL/6J mice (weight range: 15.7-46.5 g) were microCT scanned in vivo at 5 months of age and subsequently sacrificed. Whole body fat volume (base of skull to distal tibia) derived from in vivo microCT was significantly (p<0.001) correlated with the ex vivo tissue weight of discrete perigonadal (R(2)=0.94), and subcutaneous (R(2)=0.91) fat pads. Restricting the analysis of tissue composition to the abdominal mid-section between L1 and L5 lumbar vertebrae did not alter the correlations between total adiposity and explanted fat pad weight. Segmentation allowed for the precise discrimination between visceral and subcutaneous fat as well as the quantification of adipose tissue within specific anatomical regions. Both the correlations between visceral fat pad weight and microCT determined visceral fat volume (R(2)=0.95, p<0.001) as well as subcutaneous fat pad weight and microCT determined subcutaneous fat volume (R(2)=0.91, p<0.001) were excellent. Data from these studies establish in vivo microCT as a non-invasive, quantitative tool that can provide an in vivo surrogate measure of total, visceral, and subcutaneous adiposity during longitudinal studies. Compared to current imaging techniques with similar capabilities, such as microMRI or the combination of DEXA with NMR, it may also be more cost-effective and offer higher spatial resolutions.
Assuntos
Gordura Intra-Abdominal/diagnóstico por imagem , Gordura Intra-Abdominal/metabolismo , Gordura Subcutânea/diagnóstico por imagem , Gordura Subcutânea/metabolismo , Microtomografia por Raio-X/métodos , Animais , Custos e Análise de Custo , Feminino , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Modelos Animais , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Imagem Corporal Total , Microtomografia por Raio-X/economiaRESUMO
The present work utilizes electrospinning to fabricate synthetic polymer/DNA composite scaffolds for therapeutic application in gene delivery for tissue engineering. The scaffolds are non-woven, nano-fibered, membranous structures composed predominantly of poly(lactide-co-glycolide) (PLGA) random copolymer and a poly(D,L-lactide)-poly(ethylene glycol) (PLA-PEG) block copolymer. Release of plasmid DNA from the scaffolds was sustained over a 20-day study period, with maximum release occurring at approximately 2 h. Cumulative release profiles indicated amounts released were approximately 68-80% of the initially loaded DNA. Variations in the PLGA to PLA-PEG block copolymer ratio vastly affected the overall structural morphology, as well as both the rate and efficiency of DNA release. Results indicated that DNA released directly from these electrospun scaffolds was indeed intact, capable of cellular transfection, and successfully encoded the protein beta-galactosidase. When tested under tensile loads, the electrospun polymer/DNA composite scaffolds exhibited tensile moduli of approximately 35 MPa, with approximately 45% strain initially. These values approximate those of skin and cartilage. Taken together, this work represents the first successful demonstration of plasmid DNA incorporation into a polymer scaffold using electrospinning.
Assuntos
DNA/administração & dosagem , Sistemas de Liberação de Medicamentos/métodos , Lactatos/administração & dosagem , Ácido Láctico/administração & dosagem , Nanotecnologia/métodos , Polietilenoglicóis/administração & dosagem , Ácido Poliglicólico/administração & dosagem , Polímeros/administração & dosagem , Animais , Linhagem Celular , DNA/genética , Camundongos , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Transfecção/métodosRESUMO
Obesity, a global pandemic that debilitates millions of people and burdens society with tens of billions of dollars in health care costs, is deterred by exercise. Although it is presumed that the more strenuous a physical challenge the more effective it will be in the suppression of adiposity, here it is shown that 15 weeks of brief, daily exposure to high-frequency mechanical signals, induced at a magnitude well below that which would arise during walking, inhibited adipogenesis by 27% in C57BL/6J mice. The mechanical signal also reduced key risk factors in the onset of type II diabetes, nonesterified free fatty acid and triglyceride content in the liver, by 43% and 39%, respectively. Over 9 weeks, these same signals suppressed fat production by 22% in the C3H.B6-6T congenic mouse strain that exhibits accelerated age-related changes in body composition. In an effort to understand the means by which fat production was inhibited, irradiated mice receiving bone marrow transplants from heterozygous GFP+ mice revealed that 6 weeks of these low-magnitude mechanical signals reduced the commitment of mesenchymal stem cell differentiation into adipocytes by 19%, indicating that formation of adipose tissue in these models was deterred by a marked reduction in stem cell adipogenesis. Translated to the human, this may represent the basis for the nonpharmacologic prevention of obesity and its sequelae, achieved through developmental, rather than metabolic, pathways.