Large Polarization Near 50 µC/cm2 in a Single Unit Cell Layer SrTiO3.

The generally nonpolar SrTiO3 has attracted more attention recently because of its possibly induced novel polar states and related paraelectric-ferroelectric phase transitions. By using controlled pulsed laser deposition, high-quality, ultrathin, and strained SrTiO3 layers were obtained. Here, transmission electron microscopy and theoretical simulations have unveiled highly polar states in SrTiO3 films even down to one unit cell at room temperature, which were stabilized in the PbTiO3/SrTiO3/PbTiO3 sandwich structures by in-plane tensile strain and interfacial coupling, as evidenced by large tetragonality (∼1.05), notable polar ion displacement (0.019 nm), and thus ultrahigh spontaneous polarization (up to ∼50 µC/cm2). These values are nearly comparable to those of the strong ferroelectrics as the PbZrxTi1-xO3 family. Our findings provide an effective and practical approach for integrating large strain states into oxide films and inducing polarization in nonpolar materials, which may broaden the functionality of nonpolar oxides and pave the way for the discovery of new electronic materials.

NIGT1.4 maintains primary root elongation in response to salt stress through induction of ERF1 in Arabidopsis.

Plants employ various molecular mechanisms to maintain primary root elongation upon salt stress. Identification of key functional genes, therein, is important for improving crop salt tolerance. Through analyzing natural variation of the primary root length of Arabidopsis natural population under salt stress, we identified NIGT1.4, encoding an MYB transcription factor, as a novel contributor to maintained root growth under salt stress. Using both T-DNA knockout and functional complementation, NIGT1.4 was confirmed to have a role in promoting primary root growth in response to salt stress. The expression of NIGT1.4 in the root was shown induced by NaCl treatments in an ABA-dependent manner. SnRK2.2 and 2.3 were shown to interact with and phosphorylate NIGT1.4 individually. The growth of the primary root of snrk2.2/2.3/2.6 triple mutant was shown sensitive to salt stress, which was similar to nigt1.4 plants. Using DNA affinity purification sequencing, ERF1, a known positive regulator for primary root elongation and salt tolerance, was identified as a target gene for NIGT1.4. The transcriptional induction of ERF1 by salt stress was shown absent in nigt1.4 background. NIGT1.4 was also confirmed to bind to the promoter region of ERF1 by yeast one-hybrid experiment and to induce the expression of ERF1 by dual-luciferase analysis. All data support the notion that salt- and ABA-elicited NIGT1.4 induces the expression of ERF1 to regulate downstream functional genes that contribute to maintained primary root elongation. NIGT1.4-ERF1, therefore, acts as a signaling node linking regulators for stress resilience and root growth, providing new insights for breeding salt-tolerant crops.

Room-temperature ferromagnetism, half-metallicity and spin transport in monolayer CrSc2Te4-based magnetic tunnel junction devices.

The discovery of novel two-dimensional (2D) half-metallic materials with a robust ferromagnetic (FM) order and a high Curie temperature (Tc) is attractive for the advancement of next-generation spintronic devices. Here, we propose a monolayer with stable 2D intrinsic FM half-metallicity, i.e., the CrSc2Te4 monolayer, which was constructed by intercalating a monolayer of 1T-CrTe2-type sandwiched between two layers of 2H-ScTe2 monolayers. Our calculations reveal that it exhibits exceptional dynamical, thermal, and mechanical stabilities accompanied by a robust half-metallicity characterized by a wide bandgap of 1.02 eV and FM ordering with a high Tc of 326 K. Notably, these properties remain intact in almost the entire range of the biaxial strain from -5% to 5%. Furthermore, our investigations demonstrate excellent spin transport capabilities, including an outstanding spin-filtering effect, and a remarkably high tunneling magnetoresistance ratio peaking at 6087.07%. The remarkable magnetic features of the 2D CrSc2Te4 monolayer with room temperature FM, intrinsic half-metallicity, and 100% spin-polarization make it a promising candidate for the next-generation high-performance spintronic nanodevices as well as high-density magnetic recording and sensors.

LncRNA ADAMTS9-AS1 inhibits the stemness of lung adenocarcinoma cells by regulating miR-5009-3p/NPNT axis.

We sought to extend our observation of LncRNA ADAMTS9-AS1 and to specifically uncover its role on the stemness of lung adenocarcinoma (LUAD) cancer cells. ADAMTS9-AS1 was poorly expressed in LUAD. The high ADAMTS9-AS1 expression was positively associated with overall survival. ADAMTS9-AS1 overexpression attenuated the colony-forming capacity and reduced stem cell-like population of LUAD cancer stem cells (CSCs). Furthermore, ADAMTS9-AS1 overexpression increased E-cadherin expression in addition to the downregulated expressions of Fibronectin and Vimentin in LUAD spheres. In vitro results also confirmed the ADAMTS9-AS1's inhibitory effect on the growth of LUAD cells. Moreover, the antagonistic repression of miR-5009-3p levels with the expression of ADAMTS9-AS1 and NPNT was confirmed. Finally, ADAMTS9-AS1 overexpression curbed the increasing stemness of LUDA-CSC caused by NPNT silencing, thus leading to the suppression of LUAD progression in vitro. Conclusively, ADAMTS9-AS1 negatively controls the LUAD cancer cell stemness progression through regulating miR-5009-3p/NPNT axis.

Atomic Insight into the Successive Antiferroelectric-Ferroelectric Phase Transition in Antiferroelectric Oxides.

Antiferroelectrics characterized by voltage-driven reversible transitions between antiparallel and parallel polarity are promising for cutting-edge electronic and electrical power applications. Wide-ranging explorations revealing the macroscopic performances and microstructural characteristics of typical antiferroelectric systems have been conducted. However, the underlying mechanism has not yet been fully unraveled, which depends largely on the atomistic processes. Herein, based on atomic-resolution transmission electron microscopy, the deterministic phase transition pathway along with the underlying lattice-by-lattice details in lead zirconate thin films was elucidated. Specifically, we identified a new type of ferrielectric-like dipole configuration with both angular and amplitude modulations, which plays the role of a precursor for a subsequent antiferroelectric to ferroelectric transformation. With the participation of the ferrielectric-like phase, the phase transition pathways driven by the phase boundary have been revealed. We provide new insights into the consecutive phase transformation in low-dimensional lead zirconate, which thus would promote potential antiferroelectric-based multifunctional devices.

Thermodynamic properties study of polyoxometalate Na7[H2PV14O42].

Lithium-ion batteries (LIBs) are widely used in electronic applications because of their high voltage, high specific energy, long lifespan, and other characteristics. Electrode materials have garnered interest as an indispensable component of LIBs. Na7[H2PV14O42] is used as an electrode material because of its excellent properties. In this study, Na7[H2PV14O42] was synthesized by the water bath method using NaVO3 as the raw material, experimentally characterized, and its thermodynamic data were measured using the Neumann-Kopp rule from 298.15 to 843 K, a Physical Property Measurement System from 15 to 309 K, and the MHTC 96 line from 473 to 773 K. The data were fitted to the Debye-Einstein heat capacity equation at low temperatures and a polynomial function at higher temperatures. The heat capacity equation of Na7[H2PV14O42] was obtained from the fitted curves. The corresponding enthalpy (▵298.15 THm), entropy (▵298.15 TSm), and Gibbs energy (▵298.15 TGm) (from 298.15 to 800 K) were calculated according to the heat capacity equation. The obtained heat capacity of Na7[H2PV14O42], as a function of temperature, was modeled as Cp = 1502.30 + 0.27T - 2.44E7T-2 J mol-1 K-1 (473-773 K). This study can compensate for the thermodynamic deficiency of Na7[H2PV14O42].

Biomass-Derived Carbon Materials for the Electrode of Metal-Air Batteries.

Facing the challenges of energy crisis and global warming, the development of renewable energy has received more and more attention. To offset the discontinuity of renewable energy, such as wind and solar energy, it is urgent to search for an excellent performance energy storage system to match them. Metal-air batteries (typical representative: Li-air battery and Zn-air battery) have broad prospects in the field of energy storage due to their high specific capacity and environmental friendliness. The drawbacks preventing the massive application of metal-air batteries are the poor reaction kinetics and high overpotential during the charging-discharging process, which can be alleviated by the application of an electrochemical catalyst and porous cathode. Biomass, also, as a renewable resource, plays a critical role in the preparation of carbon-based catalysts and porous cathode with excellent performance for metal-air batteries due to the inherent rich heteroatom and pore structure of biomass. In this paper, we have reviewed the latest progress in the creative preparation of porous cathode for the Li-air battery and Zn-air battery from biomass and summarized the effects of various biomass sources precursors on the composition, morphology and structure-activity relationship of cathode. This review will help us understand the relevant applications of biomass carbon in the field of metal-air batteries.

Biphenylene monolayer: a novel nonbenzenoid carbon allotrope with potential application as an anode material for high-performance sodium-ion batteries.

Allotrope metal structures composed of carbon as anode materials for metal-ion batteries are a current research hotspot. In this work, the recently synthesized graphene allotrope, two-dimensional (2D) biphenylene, consisting of tetragonal, hexagonal and octagonal carbon rings, was explored theoretically. Our first-principles calculations verified that 2D biphenylene has dynamical, mechanical and thermal stability and exhibits metallic features. Its novel structure can provide multiple adsorption sites for Na ions, a fast charge-discharge rate (low Na migration barriers of <0.2 eV) and high theoretical capacity (1075.37 mA h g-1). These superior properties, combined with its carbon abundance and light mass, make the biphenylene monolayer a promising high-performance anode for sodium-ion batteries (SIBs).

Critical Overview of Hepatic Factors That Link Non-Alcoholic Fatty Liver Disease and Acute Kidney Injury: Physiology and Therapeutic Implications.

Non-alcoholic fatty liver disease (NAFLD) is defined as a combination of a group of progressive diseases, presenting different structural features of the liver at different stages of the disease. According to epidemiological surveys, as living standards improve, the global prevalence of NAFLD increases. Acute kidney injury (AKI) is a class of clinical conditions characterized by a rapid decline in kidney function. NAFLD and AKI, as major public health diseases with high prevalence and mortality, respectively, worldwide, place a heavy burden on societal healthcare systems. Clinical observations of patients with NAFLD with AKI suggest a possible association between the two diseases. However, little is known about the pathogenic mechanisms linking NAFLD and AKI, and the combination of the diseases is poorly treated. Previous studies have revealed that liver-derived factors are transported to distal organs via circulation, such as the kidney, where they elicit specific effects. Of note, while NAFLD affects the expression of many hepatic factors, studies on the mechanisms whereby NAFLD mediates the generation of hepatic factors that lead to AKI are lacking. Considering the unique positioning of hepatic factors in coordinating systemic energy metabolism and maintaining energy homeostasis, we hypothesize that the effects of NAFLD are not only limited to the structural and functional changes in the liver but may also involve the entire body via the hepatic factors, e.g., playing an important role in the development of AKI. This raises the question of whether analogs of beneficial hepatic factors or inhibitors of detrimental hepatic factors could be used as a treatment for NAFLD-mediated and hepatic factor-driven AKI or other metabolic disorders. Accordingly, in this review, we describe the systemic effects of several types of hepatic factors, with a particular focus on the possible link between hepatic factors whose expression is altered under NAFLD and AKI. We also summarize the role of some key hepatic factors in metabolic control mechanisms and discuss their possible use as a preventive treatment for the progression of metabolic diseases.

In Situ Tuning Underwater Bubble Movement on Slippery Lubricant-Infused Anisotropic Microgrooved Surface by Unidirectional Mechanical Strain.

Numerous studies have focused on designing and fabricating functional interfaces that control movement behavior of underwater gas bubbles, which are ubiquitous in a variety of natural and industrial settings. Nevertheless, developing surfaces with in situ tunable bubble movement remain elusive because of current complicated tuning strategies on the specific materials. Inspired by natural pitcher plant and rice leaves, here we report a kind of slippery lubricant-infused anisotropic microgrooved surface (SLI-AMGS) fabricated by femtosecond laser direct writing technology and realize the in situ reversible switching between underwater bubble sliding and pinning by unidirectional mechanical tensile strain. Different experimental parameters including lubricant oil film thickness, bubble volumes and laser power have been researched to manifest the relationship with bubble sliding behaviors. The underlying mechanism of in situ reversible switching mainly lies on the decrease of the lubricant oil film thickness during the process of mechanical stretching in which the uniform and stable oil film layer becomes uneven. This uneven lubricant oil film results in an extraordinary increase of contact angle hysteresis and resistance. At last, we demonstrate a real-time dynamic modulation of the underwater bubble on the SLI-AMGS with a changing mechanical tensile strain for several repeatable times in different acid-based environments. Our work manifests great potential applications in widespread fields including underwater bubble microfluidics and microbubble robots.

Ceramide synthases: insights into the expression and prognosis of lung cancer.

CerSs (ceramide synthases), a group of enzymes that catalyze the formation of ceramides from sphingoid base and acyl-CoA substrates. As far, six types of CerSs (CerS1-CerS6) have been found in mammals. Each of these enzymes have unique characteristics, but maybe more noteworthy is the ability of individual CerS isoform to produce a ceramide with a characteristic acyl chain distribution. As key regulators of sphingolipid metabolism, CerSs highlight their unique characteristics and have emerging roles in regulating programmed cell death, cancer and many other aspects of biology. However, the role of CerSs in lung cancer has not been fully elucidated. In this study, there was no significant change in the sequence or copy number of CerSs gene, which could explain the stability of malignant tumor development through COSMIC database. In addition, gene expression in lung cancer was examined using the OncomineTM database, and the prognostic value of each gene in non-small cell lung cancer (NSCLC) was analyzed by Kaplan-Meier analysis. The results showed that high mRNA expression levels of CerS2, CerS3, CerS4 and CerS5 in all NSCLC patients were associated with improved prognosis. Among them, CerS2 and CerS5 are also highly expressed in adenocarcinoma (Ade), but not in squamous cell carcinoma (SCC). In contrast, high or low expression of CerS1 and CerS6 no difference was observed in patients with NSCLC, Ade and SCC. Integrated the data of this study suggested that these CerSs may be a potential tumor markers or drug target of new research direction.

Subtle changes of the crystalline lens after cycloplegia: a retrospective study.

BACKGROUND: The purpose of this study was to evaluate the shape of the crystalline lens in terms of biometry and diopters before and after cycloplegia using the CASIA2 swept-source (SS) optical coherence tomography (OCT) system on the anterior segment. METHODS: This was a retrospective study. Children and adolescents (26 males and 29 females, aged 4-21 years) with simple ametropia were selected for optometry and CASIA2 imaging at 2 separate visits before and after cycloplegia. Diopter values were derived from the spherical power (S) obtained by optometry. Biometric parameters of the crystalline lens, including the anterior chamber depth (ACD), anterior and posterior curvature of the lens (ACL and PCL), lens thickness (LTH), lens decentration (LD), lens tilt (LT), and equivalent diameter of the lens (LED), were measured by the CASIA2 system. The differences in these parameters after compared with before cycloplegia were determined, and their relationships were analyzed. RESULTS: Fifty-five participants (106 eyes) were initially enrolled. There was a significant difference (P < 0.05) in the S (t=-7.026, P < 0.001), ACD (t=-8.796, P < 0.001), ACL (t=-13.263, P < 0.001) and LTH (t = 7.363, P < 0.001) after compared with before cycloplegia. The change in the PCL (t = 1.557, P = 0.122), LD (t = 0.876, P = 0.383), LT (t = 0.440, P = 0.661) and LED (t=-0.351, P = 0.726) was not statistically significant (P > 0.05). There was a significant (P < 0.05) correlation of the change in the S with that in the ACL (r = 0.466, P < 0.001), LTH (r=-0.592, P < 0.001), and LED (r = 0.223, P = 0.021) but not the PCL (r = 0.19, P = 0.051), LD (r=-0.048, P = 0.0628) or LT (r=-0.022, P = 0.822). Furthermore, the change in the ACD was closely related to the change in crystalline morphology. However, in children and adolescents, we found that the change in crystalline morphology was unrelated to age. CONCLUSIONS: Changes in lens morphology after compared with before cycloplegia are mainly related to the ACL and LTH, but there is no difference in the PCL, LD, LT, or LED. In the adolescent population, change in the S is related to change in the ACL, LED and LTH. However, age is unrelated to the shape and tendency of the crystalline lens. Further research is required to determine whether the same conclusion applies to different age groups and different refractive states (myopia, hyperopia, emmetropia) .

A study on clinical effect of Arbidol combined with adjuvant therapy on COVID-19.

This study aims to explore the clinical effect of Arbidol (ARB) combined with adjuvant therapy on patients with coronavirus disease 2019 (COVID-19). The study included 62 patients with COVID-19 admitted to the First Hospital of Jiaxing from January to March 2020, and all patients were divided into the test group and the control group according to whether they received ARB during hospitalization. Various indexes in the two groups before and after treatment were observed and recorded, including fever, cough, hypodynamia, nasal obstruction, nasal discharge, diarrhea, C-reactive protein (CRP), procalcitonin (PCT), blood routine indexes, blood biochemical indexes, time to achieve negative virus nucleic acid, and so on. The fever and cough in the test group were relieved markedly faster than those in the control group (P < .05); there was no obvious difference between the two groups concerning the percentage of patients with abnormal CRP, PCT, blood routine indexes, aspartate aminotransferase, and alanine aminotransferase (P > .05); the time for two consecutive negative nucleic acid tests in the test group were shorter than that in the control group; the hospitalization period of the patients in the test group and control group were (16.5 ± 7.14) days and (18.55 ± 7.52) days, respectively. ARB combined with adjuvant therapy might be able to relieve the fever of COVID-19 sufferers faster and accelerate the cure time to some degree, hence it's recommended for further research clinically.

Metallic FeSe monolayer as an anode material for Li and non-Li ion batteries: a DFT study.

By means of density functional theory computations, we explored the electrochemical performance of an FeSe monolayer as an anode material for lithium and non-lithium ion batteries (LIBs and NLIBs). The electronic structure, adsorption, diffusion, and storage behavior of different metal atoms (M) in FeSe were systematically investigated. Our computations revealed that M adsorbed FeSe (M = Li, Na and K) systems show metallic characteristics that give rise to good electrical conductivity and mobility with low activation energies for diffusion (0.16, 0.13 and 0.11 eV for Li, Na, and K, respectively) of electrons and metal atoms in the materials, indicative of a fast charge/discharge rate. In addition, the theoretical capacities of the FeSe monolayer for Li, Na and K can reach up to 658, 473, and 315 mA h g-1, respectively, higher than that of commercial graphite (372 mA h g-1 for Li, 284 mA h g-1 for Na, and 273 mA h g-1 for K), and the average open-circuit voltage is moderate (0.38-0.88 V for Li, Na and K). All these characteristics suggest that the FeSe monolayer is a potential anode material for alkali-metal rechargeable batteries.

MicroRNA-668-3p Protects Against Oxygen-Glucose Deprivation in a Rat H9c2 Cardiomyocyte Model of Ischemia-Reperfusion Injury by Targeting the Stromal Cell-Derived Factor-1 (SDF-1)/CXCR4 Signaling Pathway.

BACKGROUND Ischemia-reperfusion injury (IRI) results from the restoration of blood supply to ischemic organs, including the heart. Expression of microRNA-668-3p (miR-668-3p) is known to protect the kidney from IRI. This study aimed to investigate the role of miR-668-3p in oxygen-glucose deprivation (OGD) in a rat H9c2 cardiomyocyte model of IRI. MATERIAL AND METHODS Rat H9c2 cardiomyocytes were cultured in glucose-free Dulbecco's modified Eagle's medium (DMEM) under anaerobic conditions, followed by oxygenation, to create the OGD model of IRI. The luciferase reporter assay evaluated the interaction between stromal cell-derived factor-1 (SDF-1), or CXC motif chemokine 12 (CXCL12), and miR-668-3p. Protein and mRNA levels of SDF-1, CXCR4, Bcl2, Bax, cleaved caspase-3, endothelial nitric oxide synthase (eNOS), and phosphorylated endothelial nitric oxide synthase (p-eNOS) were analyzed by Western blot and quantitative reverse transcription-polymerase chain reaction (RT-qPCR), and apoptosis were assessed by flow cytometry. Enzyme-linked immunosorbent assay (ELISA) measured reactive oxygen species (ROS), including malondialdehyde (MDA), nitric oxide (NO), p-eNOS, and the inflammatory cytokines, tumor necrosis factor-alpha (TNF-alpha), interleukin-1ß (IL-1ß), IL-6, and monocyte chemoattractant protein-1 (MCP-1) in H9c2 cell supernatants. RESULTS In the OGD rat H9c2 cardiomyocyte model of IRI, miR-668-3p levels were reduced. Overexpression of miR-668-3p inhibited SDF-1, CXCR4, the expression of inflammatory cytokines, markers of oxidative stress, and p-eNOS. The overexpression of SDF-1 reversed these findings. Overexpression of SDF-1 promoted cell apoptosis, which was reduced by miR-668-3p. CONCLUSIONS In the OGD rat H9c2 cardiomyocyte model of IRI, miR-668-3p suppressed mediators of inflammation and oxidative stress and enhanced cell viability through the SDF-1/CXCR4 signaling pathway.

Repair of anomalous right upper pulmonary venous connection with extracardiac tunnel using pedicled autologous pericardium.

We introduce a new surgical technique where an extracardiac tunnel is created using pedicled autologous pericardium in an 8-month-old boy who was diagnosed with ventricular septal defect and anomalous connection of the right superior pulmonary vein to the superior vena cava.

A Robust Real-Time Detecting and Tracking Framework for Multiple Kinds of Unmarked Object.

A rodent real-time tracking framework is proposed to automatically detect and track multi-objects in real time and output the coordinates of each object, which combines deep learning (YOLO v3: You Only Look Once, v3), the Kalman Filter, improved Hungarian algorithm, and the nine-point position correction algorithm. A model of a Rat-YOLO is trained in our experiment. The Kalman Filter model is established in an acceleration model to predict the position of the rat in the next frame. The predicted data is used to fill the losing position of rats if the Rat-YOLO doesn't work in the current frame, and to associate the ID between the last frame and current frame. The Hungarian assigned algorithm is used to show the relationship between the objects of the last frame and the objects of the current frame and match the ID of the objects. The nine-point position correction algorithm is presented to adjust the correctness of the Rat-YOLO result and the predicted results. As the training of deep learning needs more datasets than our experiment, and it is time-consuming to process manual marking, automatic software for generating labeled datasets is proposed under a fixed scene and the labeled datasets are manually verified in term of their correctness. Besides this, in an off-line experiment, a mask is presented to remove the highlight. In this experiment, we select the 500 frames of the data as the training datasets and label these images with the automatic label generating software. A video (of 2892 frames) is tested by the trained Rat model and the accuracy of detecting all the three rats is around 72.545%, however, the Rat-YOLO combining the Kalman Filter and nine-point position correction arithmetic improved the accuracy to 95.194%.

Short-term culture with IL-2 is beneficial for potent memory chimeric antigen receptor T cell production.

Interleukin-2 (IL-2) has been extensively used to boost the body's immune cells, especially T cells. IL-2 is a cytokine that for many years was used to activate and amplify T cells. Due to its potent T cell growth-inducing functions in vitro, for many years, IL-2 was used for the culture and expansion of various T cell products, including tumor-infiltrating lymphocytes (TIL), T cell receptors T cells (TCR T), or genetically engineered cells with chimeric antigen receptors T cells (CAR T). Despite its positive effect on T cell production, the side-effect is not well studied. Here, we reported that long-term culture with IL-2 promotes terminal differentiation and impairs rather than boosts the function of chimeric antigen receptor T cells. However, short-term culture with IL-2 predominantly generates memory CAR T cell favorable for cancer treatment.

Polyphyllin I modulates MALAT1/STAT3 signaling to induce apoptosis in gefitinib-resistant non-small cell lung cancer.

Non-small cell lung cancer (NSCLC) patients harboring EGFR mutation who initially respond to EGFR-TKI will gradually develop acquired resistance. There is still a challenge to treat EGFR-TKI resistant NSCLC patients. Polyphyllin I (PP I), a steroidal saponin isolated from Paris polyphylla., has been exhibited antitumor activities against various carcinomas. However, its mechanism in treating EGFR-TKI resistant NSCLC has not been well elucidated. In this study, we found that PP I suppressed the cell viability and induced apoptosis of gefitinib-resistant NSCLC cells and xenograft models. These therapeutic efficacies were associated with down-regulated level of MALAT1, leading to inactivation of STAT3 signaling pathway. The cell viability inhibition and apoptosis inducing in gefitinib-resistant NSCLC triggered by PP I were abolished by MALAT1 overexpression, while the cell viability inhibition and apoptosis inducing triggered by PP I were potentiated by MALAT1 knockdown. These findings suggest that, in vitro and in vivo, PP I inhibits the viability and induces apoptosis of gefitinib-resistant NSCLC by down-regulating MALAT1 and inactivating STAT3 signaling pathway. Thus, PPI could serve a promising therapeutic agent for the treatment of gefitinib-resistant NSCLC.

The dimensional and hydrogenating effect on the electronic properties of ZnSe nanomaterials: a computational investigation.

We performed a comprehensive first-principles study on the structural and electronic properties of ZnSe two-dimensional (2D) nanosheets and their derived one-dimensional (1D) nanoribbons (NRs) and nanotubes (NTs). Both hexagonal and tetragonal phases of ZnSe (h-ZnSe and t-ZnSe) were considered. The tetragonal phase is thermodynamically more favorable for 2D monolayers and 1D pristine ribbons, in contrast, the hexagonal phase is preferred for the edge-hydrogenated 1D NRs and NTs. The 2D h-ZnSe monolayer is a direct-bandgap semiconductor. Both the pristine zigzag nanoribbons (z-hNRs) and the corresponding edge-hydrogenated NRs gradually convert from the direct-bandgap semiconducting phase into a metallic phase as the ribbon width increases; the pristine armchair nanoribbons (a-hNRs) remain as semiconductors with indirect bandgaps with increasing ribbon width, and edge hydrogenating switches the indirect-bandgap feature to the direct-bandgap character or the metallic character with different edge passivation styles. The 1D h-ZnSe single-walled nanotubes in both armchair and zigzag forms keep the direct-bandgap semiconducting property of the 2D counterpart but with smaller band gaps. For the thermodynamically more favorable t-ZnSe monolayer, the intrinsic direct-bandgap semiconducting character is rather robust: the derived 1D nanoribbons with edges unsaturated or hydrogenated fully, and 1D single-walled nanotubes all preserve the direct-bandgap semiconducting feature. Our systemic study provides deep insights into the electronic properties of ZnSe-based nanomaterials and is helpful for experimentalists to design and fabricate ZnSe-based nanoelectronics.