TG-DSC and TG-FTIR Studies of Annelated Triazinylacetic Acid Ethyl Esters-Potential Anticancer Agents.

To avoid problems associated with the storage and processing of newly developed potential medicines, there is a need to carry out thermal studies in the preclinical phase of drug development. The thermal behaviour and decomposition pathway of a whole novel class of patented potential molecular pharmaceutics, i.e., ethyl 2-[4-oxo-8-(R-phenyl)-4,6,7,8-tetrahydroimidazo[2,1-c][1,2,4]triazin-3-yl]acetates (1-6) were reported for the first time in inert and oxidative atmospheres. The experiments were conducted with the use of simultaneous thermogravimetry/differential scanning calorimetry (TG-DSC) and simultaneous thermogravimetry coupled with Fourier transform infrared spectroscopy (TG-FTIR). The decomposition pathways of compounds 1-6 were found to be different under oxidative and inert conditions. It was proven that the investigated molecules reveal higher thermal stability under a synthetic air atmosphere than under a nitrogen atmosphere, and their decomposition is preceded by the melting process. Among all the investigated compounds, only the meta-chloro derivative (4) was found to exhibit interesting polymorphic behaviour at a low heating rate (10 °C min-1). It was proven that the oxidative decomposition process of the studied molecules proceeds in three overlapping stages accompanied by strong exothermic effects. Additionally, it was concluded that the title compounds were stable up to a temperature of 195-216 °C in an atmosphere of synthetic air, and their thermal stability decreased in the order of R at the benzene ring: 4-CH3 > 3,4-Cl2 > 4-Cl > H > 2-OCH3 > 3-Cl.

Thermal Investigations of Annelated Triazinones-Potential Analgesic and Anticancer Agents.

In this article, for the first time, TG-DSC and TG-FTIR investigations of potential pharmaceutics, i.e., analgesic and anticancer active annelated triazinones (1-9) have been presented. The thermal behaviour of these molecules was established in oxidative and inert conditions. The solid-liquid phase transition for each compound (1-9) was documented by one sharp DSC peak confirming the high purity of each sample studied. All the molecules were characterised in terms of calorimetric changes and mass changes during their heating. They revealed high thermal stability in oxidative and inert conditions. The observed tendency in thermal stability changes in relation to a substituent present at the phenyl moiety was found to be similar in air and nitrogen. It was confirmed that annelated triazinones 1-9 were stable up to a temperature range of 241-296 °C in air, and their decomposition process proceeded in two stages under oxidative conditions. In addition, it was established that their thermal stability in air decreased in the following order of R at the phenyl moiety: 4-Cl > 3,4-Cl2 > H > 3-Cl > 4-CH3 > 2-CH3 > 3-CH3 > 2-Cl > 2-OCH3. The volatile decomposition products of the investigated molecules were proposed by comparing the FTIR spectra collected during their thermogravimetric analysis in nitrogen with the spectra from the database of reference compounds. None of annelated triazinones 1-9 underwent any polymorphic transformation during thermal studies. All the compounds proved to be safe for erythrocytes. In turn, molecules 3, 6, and 9 protected red blood cells from oxidative damage, and therefore may be helpful in the prevention of free radical-mediated diseases.

A Series of Novel 3D Coordination Polymers Based on the Quinoline-2,4-dicarboxylate Building Block and Lanthanide(III) Ions-Temperature Dependence Investigations.

A series of novel 3D coordination polymers [Ln2(Qdca)3(H2O)x]·yH2O (x = 3 or 4, y = 0-4) assembled from selected lanthanide ions (Ln(III) = Nd, Eu, Tb, and Er) and a non-explored quinoline-2,4-dicarboxylate building block (Qdca2- = C11H5NO42-) were prepared under hydrothermal conditions at temperatures of 100, 120, and 150 °C. Generally, an increase in synthesis temperature resulted in structural transformations and the formation of more hydrated compounds. The metal complexes were characterized by elemental analysis, single-crystal and powder X-ray diffraction methods, thermal analysis (TG-DSC), ATR/FTIR, UV/Vis, and luminescence spectroscopy. The structural variety of three-dimensional coordination polymers can be ascribed to the temperature effect, which enforces the diversity of quinoline-2,4-dicarboxylate ligand denticity and conformation. The Qdca2- ligand only behaves as a bridging or bridging-chelating building block binding two to five metal centers with seven different coordination modes arising mainly from different carboxylate group coordination types. The presence of water molecules in the structures of complexes is crucial for their stability. The removal of both coordinated and non-coordinated water molecules leads to the disintegration and combustion of metal-organic frameworks to the appropriate lanthanide oxides. The luminescence features of complexes, quantum yield, and luminescent lifetimes were measured and analyzed. Only the Eu complexes show emission in the VIS region, whereas Nd and Er complexes emit in the NIR range. The luminescence properties of complexes were correlated with the crystal structures of the investigated complexes.

Luminescent Hybrid BPA.DA-NVP@Eu2L3 Materials: In Situ Synthesis, Spectroscopic, Thermal, and Mechanical Characterization.

A series of homogeneous hybrid BPA.DA-NVP@Eu2L3 materials were obtained through an in situ approach where the luminescent dopant was formed at the molecular level with different contents (0.1; 0.2; 0.5; 1; and 2% by weight). A Europium(III) complex (Eu2L3) with quinoline-2,4-dicarboxylic acid was applied as a luminescence additive while a polymer matrix consisted of a combination of bisphenol A diacrylate (BPA.DA) and N-vinylpyrrolidone (NVP) monomers. Synthesis steps and the final materials were monitored by NMR and Fourier transform infrared spectroscopy (FTIR). The emission, excitation spectra, lifetime, and quantum yield measurements were applied for the determination of the photophysical characteristics. The thermal and mechanical properties of the obtained materials were tested via thermal analysis methods (TG/DTG/DSC and TG-FTIR) in air and nitrogen atmospheres, dynamic mechanical analysis (DMA), and hardness and bending measurements. Generally, even a small addition of the metal complex component causes changes in the thermal, mechanical, and luminescent properties. Hybrid materials with a greater europium complex content are characterized by a lower stiffness and hardness while the heterogeneity and the flexibility of the samples increase. A very small amount of an Eu2L3 admixture (0.1% wt.) in a hybrid material causes an emission in the red spectral range and the luminescence intensity was reached for the BPA-DA-NVP@1%Eu2L3 material. These materials may be potentially used in chemical sensing, security systems, and protective coatings against UV.

Solvent influence on the crystal structures of new cadmium tri-tert-butoxysilanethiolate complexes with 1,4-bis(3-aminopropyl)piperazine: luminescence and antifungal activity.

Monocrystals of dinuclear µ-1,4-bis(3-aminopropyl)piperazine-κ4N1,N1':N4,N4'-bis[bis(tri-tert-butoxysilanethiolato-κS)cadmium(II)], [Cd2(C12H27O3SSi)4(C10H24N4)] or [Cd2{SSi(OtBu)3}4(µ-BAPP)], 1, and polynuclear catena-poly[[bis(tri-tert-butoxysilanethiolato-κS)cadmium(II)]-µ-1,4-bis(3-aminopropyl)piperazine-κ2N1':N4'], [Cd(C12H27O3SSi)2(C10H24N4)]n or [Cd{SSi(OtBu)3}2(µ-BAPP)]n, 2, with 1,4-bis(3-aminopropyl)piperazine (BAPP) and tri-tert-butoxysilanethiolate ligands, were obtained from the same ratio of reactants, but with different solvents used for the crystallization processes. The structures and properties of both complexes were characterized using elemental analysis, X-ray diffraction and FT-IR, 1H NMR and luminescence spectroscopy. Applied density functional theory (DFT) computational methods and noncovalent interaction (NCI) analysis were used for geometry optimization and visualization of the interactions between the metallic centres and their surroundings. The X-ray analysis revealed four-coordinate CdII centres bound to two S atoms of the silanethiolate groups and two N atoms of the BAPP ligand; however, it chelates to tertiary and primary N atoms in 1, whilst in 2 it does not chelate and bonds only to RNH2. The photoluminescence properties of complexes 1 and 2 result from free-ligand emission and differ significantly from each other with respect to emission intensity. Additionally, antifungal activity was investigated against 18 isolates of fungi. Compound 1 strongly inhibited the growth of three dermatophytes: Epidermophyton floccosum, Microsporum canis and Trichophyton rubrum.

A Top-Down Approach and Thermal Characterization of Luminescent Hybrid BPA.DA-MMA@Ln2L3 Materials Based on Lanthanide(III) 1H-Pyrazole-3,5-Dicarboxylates.

In this study, novel hybrid materials exhibiting luminescent properties were prepared and characterized. A top-down approach obtained a series of polymeric materials with incorporated different amounts (0.1; 0.2; 0.5; 1, and 2 wt.%) of dopants, i.e., europium(III) and terbium(III) 1H-pyrazole-3,5-dicarboxylates, as luminescent sources. Methyl methacrylate and bisphenol A diacrylate monomers were applied for matrix formation. The resulting materials were characterized using Fourier transform infrared spectroscopy (FTIR) and thermal analysis methods (TG-DTG-DSC, TG-FTIR) in air and nitrogen atmosphere, as well as by luminescence spectroscopy. The homogeneity of the resulting materials was investigated by means of optical microscopy. All obtained materials exhibited good thermal stability in both oxidizing and inert atmospheres. The addition of lanthanide(III) complexes slightly changed the thermal decomposition pathways. The main volatile products of materials pyrolysis are carbon oxides, water, methyl methacrylic acid and its derivatives, bisphenol A, 4-propylphenol, and methane. The luminescence properties of the lanthanide complexes and the prepared hybrid materials were investigated in detail.

Structural and Thermal Investigations of Co(II) and Ni(II) Coordination Polymers Based on biphenyl-4,4'-dioxydiacetate Linker.

Two coordination polymers, [Co(µ4-L)(H2O)2]n (1) and [Ni(µ-L)(H2O)4]n (2), were solvothermally assembled from the corresponding metal(II) chlorides and biphenyl-4,4-dioxydiacetic acid (H2L) as a flexible dicarboxylate linker. The cobalt(II) compound 1 featured a layer-pillared 3D metal-organic network with a cds topology, while the nickel(II) derivative 2 represented a linear chain 1D coordination polymer with a 2C1 topology. The µ4- and µ-L2- linkers exhibited different denticity and coordination modes in the synthesized compounds, thus contributing to their structural diversity. The dimensionality of 1 and 2 had an influence on their thermal stability and decomposition processes, which were investigated in detail by TG-DSC and TG-FTIR methods. Thermal decomposition products of coordination polymers were also analyzed by PXRD, confirming the formation of Co3O4/CoO and NiO as final materials. The obtained compounds broaden a family of coordination polymers assembled from flexible dicarboxylate linkers.

Thermal, Spectroscopy and Luminescent Characterization of Hybrid PMMA/Lanthanide Complex Materials.

Novel hybrid materials based on the poly(methyl methacrylate) (PMMA) matrix and lanthanide(III) carboxylates Eu:2,6-DClB and Tb:2,6-DClB were synthesized and carefully analyzed in the context of their potential application in optically active polymer-based optical fibers. To determine the usefulness of the obtained materials, a careful thermal, mass spectroscopy, and optical characterization was performed, focusing on the features critical for the technology of optical fiber processing. In addition, the luminescent features of both lanthanide complexes and the resulting hybrid composites were carefully investigated to identify the processes responsible for light emission and to analyze the influence of the PMMA host on light emission intensity and spectral characteristics. The obtained results showed that both lanthanide carboxylate complexes exhibited intense luminescence in the red and green spectral range, typical of europium and terbium dopants, and that those features were well preserved after introducing them into the PMMA polymer. Thermal analysis also proved that introducing the luminescent additives did not significantly affect the thermal properties of both hybrid materials, thus enabling further processing into the form of optical fibers.

New Coordination Polymers of Selected Lanthanides with 1,2-Phenylenediacetate Linker: Structures, Thermal and Luminescence Properties.

Solvothermal reactions of lanthanide (III) salts with 1,2-phenylenediacetic acid in N,N'-dimethylformamide (DMF) solvent lead to the formation of the metal complexes of the general formula Ln2(1,2-pda)3(DMF)2, where Ln(III) = Pr(1), Sm(2), Eu(3), Tb(4), Dy(5), and Er(6), 1,2-pda = [C6H4(CH2COO)2]2-. The compounds were characterized by elemental analysis, powder and single-crystal X-ray diffraction methods, thermal analysis methods (TG-DSC and TG-FTIR), infrared and luminescence spectroscopy. They exhibit structural similarity in the two groups (Pr, Sm, and Eu; Tb, Dy, and Er), which was reflected in their thermal behaviours and spectroscopic properties. Single-crystal X-ray diffraction studies reveal that Sm(2) and Eu(3) complexes form 2D coordination polymers with four crystallographically independent metal centers. Every second lanthanide ion is additionally coordinated by two DMF molecules. The 1,2-phenylenediacetate linker shows different denticity being: penta- and hexadentate while carboxylate groups exhibit bidentate-bridging, bidentate-chelating, and three-dentate bridging-chelating modes. The infrared spectra reflect divergence between these two groups of complexes. The complexes of lighter lanthanides contain in the structure coordinated DMF molecules, while in the structures of heavier complexes, DMF molecules appear in the inner and outer coordination sphere. Both carboxylate groups are deprotonated and engaged in the coordination of metal centers but in different ways in such groups of complexes. In the groups, the thermal decomposition of the isostructural complexes occurs similarly. Pyrolysis of complexes takes place with the formation of such gaseous products as DMF, carbon oxides, ortho-xylene, ethers, water, carboxylic acids, and esters. The complexes of Eu and Tb exhibit characteristic luminescence in the VIS region, while the erbium complex emits NIR wavelength.

Novel tetrahedral cobalt(ii) silanethiolates: structures and magnetism.

Three heteroleptic complexes of Co(ii) tri-tert-butoxysilanethiolates have been synthesized with piperidine [Co{SSi(OtBu)3}2(ppd)2] 1, piperazine [Co{SSi(OtBu)3}2(NH3)]2(µ-ppz)·2CH3CN 2, and N-ethylimidazole [Co{SSi(OtBu)3}2(etim)2] 3. The complexes have been characterized by a single-crystal X-ray, revealing their tetrahedral geometry on Co(ii) coordinated by two nitrogen and two sulfur atoms. Complexes 1 and 3 are mononuclear, whereas 2 is binuclear. The spectral properties and thermal properties of 1-3 complexes were established by FTIR spectroscopy for solid samples and TGA. The magnetic properties of complexes 1, 2, and 3 have been investigated by static magnetic measurements and X-band EPR spectroscopy. These studies have shown that 1 and 3, regardless of the similarity in structure of CoN2S2 cores, demonstrate different types of local magnetic anisotropy. Magnetic investigations of 2 reveal the presence of weak antiferromagnetic intra-molecular Co(ii)-Co(ii) interactions that are strongly influenced by the local magnetic anisotropy of individual Co(ii) ions.

Functionalized ß-cyclodextrin based potentiometric sensor for naproxen determination.

Potentiometric sensors based on neutral ß-cyclodextrins: (2-hydroxypropyl)-ß-cyclodextrin, heptakis(2,3,6-tri-O-methyl)-ß-cyclodextrin, heptakis(2,3,6-tri-O-benzoyl)-ß-cyclodextrin and anionic ß-cyclodextrin: (2-hydroxy-3-N,N,N-trimethylamino)propyl-ß-cyclodextrin chloride for naproxen are described. Inclusion complexes of naproxen with the above-mentioned cyclodextrins were studied using IR spectroscopy. The electrode surface was made from PVC membranes doped with the appropriate ß-cyclodextrin as ionophores and quaternary ammonium chlorides as positive charge additives that were dispersed in plasticizers. The optimum membrane contains heptakis(2,3,6-tri-O-benzoyl)-ß-cyclodextrin, o-nitrophenyloctyl ether and tetraoctyl ammonium chloride as a lipophilic salt. The electrode is characterized by a Nernstian response slope of -59.0 ± 0.5 mV decade(-1) over the linear range of 5.0 × 10(-5)-1.0 × 10(-2) mol L(-1) and the detection limit 1.0 × 10(-5) mol L(-1), as well as the response time 10s. It can be used in the pH range 6.2-8.5 for 10 months without any considerable deterioration. Incorporation of ß-cyclodextrins improved the electrode selectivity towards naproxen ions from several inorganic and organic interferents and some common drug excipients due to concovalent interactions (host molecule-guest molecule). The notable advantages of the naproxen-selective electrode include its high sensitivity, high selectivity, cost-effectiveness as well as accurate and comfortable application in drug analysis and milk samples.