RESUMO
The complex and heterogeneous nature of the lignin macromolecule has presented a lasting barrier to its utilization. To achieve high lignin yield, the technical lignin extraction process usually severely modifies and condenses the native structure of lignin, which is a critical drawback for its utilization in conversion processes. In addition, there is no method capable of separating lignin from plant biomass with controlled structural properties. Here, we developed an N-heterocycle-based deep eutectic solvent formed between lactic acid and pyrazole (La-Py DES) with a binary hydrogen bonding functionality resulting in a high affinity toward lignin. Up to 93.7% of lignin was extracted from wheat straw biomass at varying conditions from 90 °C to 145 °C. Through careful selection of treatment conditions as well as lactic acid to pyrazole ratios, lignin with controlled levels of ether linkage content, hydroxyl group content, and average molecular weight can be generated. Under mild extraction conditions (90 °C to 120 °C), light-colored native-like lignin can be produced with up to 80% yield, whereas ether linkage-free lignin with low polydispersity can be obtained at 145 °C. Overall, this study offers a new strategy for native lignin extraction and generating lignin with controlled structural properties.
RESUMO
Lignin is the largest source of renewable material with an aromatic skeleton. However, due to the recalcitrant and heterogeneous nature of the lignin polymer, it has been a challenge to effectively depolymerize lignin and produce high-value chemicals with high selectivity. In this study, a highly efficient lignin-to-monomeric phenolic compounds (MPC) conversion method based on peracetic acid (PAA) treatment was reported. PAA treatment of two biorefinery lignin samples, diluted acid pretreated corn stover lignin (DACSL) and steam exploded spruce lignin (SESPL), led to complete solubilization and production of selective hydroxylated monomeric phenolic compounds (MPC-H) and monomeric phenolic acid compounds (MPC-A) including 4-hydroxy-2-methoxyphenol, p-hydroxybenzoic acid, vanillic acid, syringic acid, and 3,4-dihydroxybenzoic acid. The maximized MPC yields obtained were 18 and 22 % based on the initial weight of the lignin in SESPL and DACSL, respectively. However, we found that the addition of niobium pentoxide catalyst to PAA treatment of lignin can significantly improve the MPC yields up to 47 %. The key reaction steps and main mechanisms involved in this new lignin-to-MPC valorization pathway were investigated and elucidated.
Assuntos
Hidroxibenzoatos/química , Lignina/química , Ácido Peracético/química , Biomassa , Catálise , PolimerizaçãoRESUMO
The maghemite particulate nanosheets (MPNs) are prepared in solvothermal system by connecting the nanoparticles in two-dimension. The interconnected MPNs sustain a mesopores structure with a high accessible surface area of 164 m2/g, and have a high performance for Cr6+ adsorption. The Cr6+ removal process fit with Langmuir adsorption model with an adsorption capacity of 20.41 mg/g. The purified solution could reach a residual concentration of 0.002 mg/L for MPNs, which is much less than the concentration in the solution of 0.249 mg/L when the nanoparticles are used. The synthesized MPNs with a saturation magnetization of 70.51 emu/g at room temperature can be easily collected and separated by an external magnet in liquid. Exchange coupling and shape anisotropy are the main reason for the higher Ms of MPNs. The unique structure with large surface area and high saturation magnetization make the MPNs favourable for the application of magnetic separation.
Assuntos
Cromatos/química , Compostos Férricos/química , Nanopartículas/química , Águas Residuárias/química , Purificação da ÁguaRESUMO
The production of 5-hydroxymethylfurfural (5-HMF) from cellulose catalyzed by a series of transition metal chlorides (i.e. FeCl3, RuCl3, VCl3, TiCl3, MoCl3 and CrCl3) was studied in biphasic system. RuCl3 was the most efficient catalyst among these transition metal chlorides for 5-HMF production, and resulted in both the highest yield of 83.3% and selectivity of 87.5% in NaCl-aqueous/butanol biphasic system. XRD analysis and FTIR spectroscopy were applied to further characterize the RuCl3 catalyzed cellulose slurries to reveal the catalytic reaction mechanism. Results demonstrated that RuCl3 enhanced the decrystallization and cleavage of COC bonds in cellulose, promoted the subsequent dehydration of glucose into 5-HMF, while suppressed the glucose retro-aldol reaction to byproduct lactic acid. In addition, with the assistance of NaCl-aqueous/butanol biphasic system, 5-HMF further degradation was limited and thusly maintained a desired 5-HMF yield. This proposed approach provides an efficient strategy for one-pot conversion of cellulose into 5-HMF.
Assuntos
Celulose/química , Furaldeído/análogos & derivados , Compostos de Rutênio/química , Catálise , Furaldeído/química , Glucose/químicaRESUMO
The heterogeneous and complex structural characteristics of lignin present a significant challenge to predict its processability (e.g., depolymerization, modifications etc.) to valuable products. This study provides a detailed characterization and comparison of structural properties of seven representative biorefinery lignin samples derived from forest and agricultural residues, which were subjected to representative pretreatment methods. A range of wet chemistry and spectroscopy methods were applied to determine specific lignin structural characteristics such as functional groups, inter-unit linkages, and peak molecular weight. In parallel, oxidative depolymerization of these lignin samples to either monomeric phenolic compounds or dicarboxylic acids were conducted, and the product yields were quantified. Based on these results (lignin structural characteristics and monomer yields), we applied for the first time the multivariable linear estimation (MVLE) approach using R Statistics (an open-source programming language and software environment for statistical computing and graphics) to gain insight toward a quantitative correlation between lignin structural properties and their conversion reactivity toward oxidative depolymerization to monomers.
RESUMO
Transforming plant biomass to biofuel is one of the few solutions that can truly sustain mankind's long-term needs for liquid transportation fuel with minimized environmental impact. However, despite decades of effort, commercial development of biomass-to-biofuel conversion processes is still not an economically viable proposition. Identifying value-added co-products along with the production of biofuel provides a key solution to overcoming this economic barrier. Lignin is the second most abundant component next to cellulose in almost all plant biomass; the emerging biomass refinery industry will inevitably generate an enormous amount of lignin. Development of selective biorefinery lignin-to-bioproducts conversion processes will play a pivotal role in significantly improving the economic feasibility and sustainability of biofuel production from renewable biomass. The urgency and importance of this endeavor has been increasingly recognized in the last few years. This paper reviews state-of-the-art oxidative lignin depolymerization chemistries employed in the papermaking process and oxidative catalysts that can be applied to biorefinery lignin to produce platform chemicals including phenolic compounds, dicarboxylic acids, and quinones in high selectivity and yield. The potential synergies of integrating new catalysts with commercial delignification chemistries are discussed. We hope the information will build on the existing body of knowledge to provide new insights towards developing practical and commercially viable lignin conversion technologies, enabling sustainable biofuel production from lignocellulosic biomass to be competitive with fossil fuel.
Assuntos
Biocombustíveis , Conservação dos Recursos Naturais/métodos , Lignina/química , Catálise , Oxirredução , PapelRESUMO
The emerging biomass-to-biofuel conversion industry has created an urgent need for identifying new applications for biorefinery lignin. This paper demonstrates a new route to producing dicarboxylic acids from biorefinery lignin through chalcopyrite-catalyzed oxidation in a highly selective process. Up to 95 % selectivity towards stable dicarboxylic acids was obtained for several types of biorefinery lignin and model compounds under mild, environmentally friendly reaction conditions. The findings from this study paved a new avenue to biorefinery lignin conversions and applications.
Assuntos
Biocombustíveis , Ácidos Dicarboxílicos/química , Lignina/química , Catálise , Cobre/química , OxirreduçãoRESUMO
Chalcopyrite CuFeS(2) nanocrystals with a diameter of 6.4 nm were synthesized using a facile solution-phase method. Due to quantum confinement, the CuFeS(2) nanocrystals exhibit a maximum ZT value of 0.264 at 500 K, which is 77 times the value of bulk chalcopyrite.