Thermal Stability of Cellulose Nanomaterials.

Thermal stability is a crucial property of materials, especially when they have a wide range of thermally sensitive applications. Cellulose nanomaterials (CNMs) extracted from cellulosic biomass have garnered significant attention due to their abundance, biodegradability, sustainability, production scalability, and industrial versatility. To explore the correlation between the structure, chemistry, and morphology of CNMs and their thermal stability, we present a comprehensive literature review. We identify five major factors affecting CNMs' thermal stability, namely type, source, reaction conditions, post-treatment, and drying method, and analyze their impact on CNMs' thermal stability using several case studies from the literature. Using multiple linear least-squares regression (MLR), we establish a quantitative relationship between thermal stability and seven variables: crystallinity index of the source, dissociation constant of the reactant used, reactant concentration, reaction temperature, reaction time, evaporation rate, and post-treatment presence. By understanding these interdependencies, our statistical analysis enables the design of CNMs with predictable thermal properties and identification of optimal conditions for achieving high thermal stability. The results of our study provide crucial insights that can guide the development of CNMs with enhanced thermal stability for use in a variety of industrial applications.

Redox-triggered Reversible Switching between Dynamic and Quasi-static α-Helical Peptides.

We report the reversible transformation between a singly stapled dynamic α-helical peptide and a doubly stapled quasi-static one through redox-triggered dithiol/disulfide conversions of a stapling moiety. This process allows the rate of interconversion between the right-handed (P) and left-handed (M) α-helices to be altered by a factor of approximately 103 before and after the transformation. An as-obtained doubly stapled α-helical peptide, which is composed of an achiral peptide having an L-valine carboxylic acid residue at the C-terminus, a disulfide-based reversible staple, and a biphenyl-based fixed staple, adopts an (M)-rich form as a kinetically trapped state. The (M)-rich helix was subsequently transformed into the thermodynamically stable (P)-rich form in 1,1,2,2-tetrachloroethane with the half-life time (t1/2) of approximately 44 days at 25 ºC. Reduction of the doubly stapled peptide with tri-n-butylphosphine in tetrahydrofuran/water (10/1, v/v) produced the corresponding singly stapled dynamic α-helical peptide bearing two thiol groups at the side chains, which underwent solvent-induced reversible helicity inversion. The resulting dithiol of the singly stapled peptide could be reoxidized to form the original doubly stapled form using 4,4'-dithiodipyridine. Furthermore, the P/M interconversion of a doubly stapled peptide with two flexible hydrocarbon-based staples is considerably more rapid than that with more rigid staples.

Multi-Responsive Supercapacitors from Chiral Nematic Cellulose Nanocrystal-Based Activated Carbon Aerogels.

The development of long-lived electrochemical energy storage systems based on renewable materials is integral for the transition toward a more sustainable society. Supercapacitors have garnered considerable interest given their impressive cycling performance, low cost, and safety. Here, the first example of a chiral nematic activated carbon aerogel is shown. Specifically, supercapacitor materials are developed based on cellulose, a non-toxic and biodegradable material. The chiral nematic structure of cellulose nanocrystals (CNCs) is harnessed to obtain free-standing hierarchically ordered activated carbon aerogels. To impart multifunctionality, iron- and cobalt-oxide nanoparticles are incorporated within the CNC matrix. The hierarchical structure remains intact even at nanoparticle concentrations of ≈70 wt%. The aerogels are highly porous, with specific surface areas up to 820 m2 g-1 . A maximum magnetization of 17.8 ± 0.1 emu g-1 with superparamagnetic behavior is obtained, providing a base for actuator applications. These materials are employed as symmetric supercapacitors; owing to the concomitant effect of the hierarchically arranged carbon skeleton and KOH activation, a maximum Cp of 294 F g-1 with a capacitance retention of 93% after 2500 cycles at 50 mV s-1 is achieved. The multifunctionality of the composite aerogels opens new possibilities for the use of biomass-derived materials in energy storage and sensing applications.

Coassembly of Cellulose Nanocrystals and Neutral Polymers in Iridescent Chiral Nematic Films.

Photonic materials based on composite films of cellulose nanocrystals (CNCs) and polymers are promising as they can be renewable and show tunable optical and mechanical properties. However, the influence of polymers on CNC self-assembly is not always well understood, and conflicting results are present in the literature. In this study, we incorporate three neutral, water-soluble polymers-poly(ethylene glycol) (PEG), poly(vinyl pyrrolidone) (PVP), and poly(acrylic acid) (PAA)-with different molecular weights into CNC suspensions at various concentrations prior to obtaining iridescent composite thin films by solvent evaporation. Through spectroscopic, potentiometric, and rheological analyses, we find that PVP physically adsorbs to the surface of CNCs resulting in a bathochromic shift in film color with both increasing concentration and polymer molecular weight. In contrast, PEG induces depletion interactions that result in a decrease in the size of chiral nematic CNC domains, with a negligible change in film color. Finally, PAA hydrogen bonds to the hydroxyl groups of CNCs, resulting in a bathochromic color shift along with interesting rheological and liquid-state properties. This work demonstrates a deeper understanding of CNC-polymer interactions during coassembly and formation of iridescent chiral nematic films, allowing for greater control over optical properties of future CNC-based materials.

Uniform Growth of Nanocrystalline ZIF-8 on Cellulose Nanocrystals: Useful Template for Microporous Organic Polymers.

Zeolitic imidazolate framework (ZIF-8) nanocrystals were uniformly grown on the surface of cellulose nanocrystals (CNCs) to give a hybrid material, ZIF@CNCs. By varying the stoichiometry of the components, it was possible to control the size of the ZIF-8 crystals grown on the CNC surface. Optimized ZIF@CNC (ZIF@CNC-2) was used as a template to synthesize a microporous organic polymer (MOP), ZIF@MOP@CNC. After etching the ZIF-8 with 6 M HCl solution, a MOP material with encapsulated CNCs (MOP@CNC) was formed. Zinc coordination into the porphyrin unit of the MOP yielded the ship-in-a-bottle structure, Zn MOP@CNC, comprised of CNCs encapsulated within the Zn-MOP. In comparison to ZIF@CNC-2, Zn MOP@CNC showed better catalytic activity and chemical stability for CO2 fixation, converting epichlorohydrin to chloroethylene carbonate. This work demonstrates a novel approach to create porous materials through CNC templating.

Cycling a Tether into Multiple Rings: Pt-Bridged Macrocycles for Differentiated Guest Recognition, Pseudorotaxane Transformations, and Guest Capture and Release.

Macrocycle engineering is a key topic in supramolecular chemistry. When synthesizing a ring, one can obtain either complex mixtures of macrocycles of different sizes or a single ring if a template is utilized. Here, we unite these approaches along with post-synthetic modifications to transform a single tether into multiple rings-up to five per tether. The macrocycles contain two bridged phenylpyridine ligands that are connected through a Pt atom, which defines the rings' shape, size, and host activity. All rings undergo redox reactions (between PtII and PtIV ) that allow for large conformational changes. Their reactivity, together with their host performance, is a convenient way to control the capture and release of guests, to mediate ring transformations, and to control pseudorotaxane-to-pseudorotaxane conversions. This novel approach could serve to assemble other libraries of small ring molecules, create cyclic polymers bridged by responsive-at-metal nodes, and produce processable mechanically interlocked molecules.

Molecular Flytraps Held Together by Platinum-Platinum Intermetallic Bonds.

Metal-metal bonds have rarely been explored as active elements in supramolecular assemblies despite their unique potential to introduce responsive behavior. In this report, a dynamic molecular container composed of two cyclometalated Pt units is constructed using Pt-Pt bonds. This molecule-the flytrap-has a flexible jaw composed of two [18]crown-6 ethers that can adapt their shape to bind large inorganic cations with sub-micromolar affinity. Along with the spectroscopic and crystallographic characterization of the flytrap, we report its photochemical assembly, which allows the capture of ions and their transport from solution to the solid state. In addition, we have been able to recycle the flytrap to regenerate its starting material due to the reversible nature of the Pt-Pt bond. We believe that other molecular containers and materials for harvesting valuable substrates from solution could be assembled using the advances presented here.

A Supramolecular Strategy for the Synthesis of Cyclic Oligomers and Polymers by Ring Expansion.

Ring-opening metathesis polymerization (ROMP) of strained macrocycles is a key method to prepare diverse polymers. However, lack of ring strain in most macrocycles is an impediment to polymerization. In this paper, the polymerization/oligomerization of unstrained macrocycles was achieved using a supramolecular approach, leading selectively to cyclic products. Diphenyl thiourea and other guest molecules were used as additives to the ROMP reaction of unstrained macrocycles. An intermediate host-guest complex leads to the stabilization of the open form of the macrocycle after treatment with Grubbs catalysts, thereby favoring polymerization by inhibiting the ring-closing reaction back to the monomer. This proof-of-concept enables ring-expansion polymerization of unstrained macrocycles leading to cyclic polymers with molecular weights up to 6700 Da.

Multiresponsive Cyclometalated Crown Ether Bearing a Platinum(II) Metal Center.

Multiresponsive materials can adapt to numerous changes in their local environment, which makes them highly valuable for various applications. Although nanostructured and polymeric multiresponsive materials are plentiful, small-molecule analogues are scarce. This work presents a compact cyclometalated platinum(II) complex that bears a crown ether cavity (18C6-PtII); the intimate ring/emitter connectivity is key to unlocking multiresponsiveness. Complex 18C6-PtII responds to (i) cationic guests, producing changes in luminescence in both solution and the solid state, (ii) solvent molecules, which perturb the packing of the complex in the solid state and cause reversible color changes, and (iii) solvent polarity, which leads to controlled aggregation. These responses may enable 18C6-PtII to function as a sensor for ions and solvents, or as a functional unit for the fabrication of hybrid supramolecular polymers and metallogels.

Noncooperative guest binding by metal-free [2 + 2] Schiff-base macrocycles.

Salphen-based [n + n] macrocycles have been widely explored for their unique chemical and topological properties following metal ion coordination. Despite having vastly different reactivity than their coordinated counterparts, fewer studies have focused on metal-free salphen macrocycles. We investigated the binding of [2 + 2] Schiff-base macrocycle host 3, which contains a central 18-crown-6-like cavity and two N2O2 moieties. This macrocycle strongly binds to spherical cationic guests (K11 ≈ 103-104 M-1, DCM/MeCN). The most robust binding was shown for K+ and Na+, followed by Li+ and Rb+. More sterically demanding cationic guests like dibenzylammonium (DBA+) showed almost no binding. The binding pocket in 3 is slightly smaller than 18-crown-6, resulting in binding outside the cavity, which provides a scaffold appropriate for 2 : 1 complexes, where two host molecules sandwich the guest. All host-guest complexes follow a 2 : 1 noncooperative binding model, where each successive binding event is less likely than the previous, unlike coordinated versions of 3, where most binding is 1 : 1.

Contemporary macrocycles for discrete polymetallic complexes: precise control over structure and function.

The growth of multimetallic clusters and complexes can proceed in the presence of suitable ligands, but often leads to polydisperse structures with poor solubility. As an alternative approach, macrocyclic molecules can anchor the multimetallic complex, directing its formation and stabilizing the resulting product. This approach can provide excellent control over the growth of clusters, and offers a handle to control solubility and other properties of the resulting complexes. In this Tutorial Review, we discuss recent activity (primarily the last two decades) directed at the controlled and reproducible synthesis of multimetallic complexes using macrocyclic ligands. Throughout the review, we focus on the unusual structures that are only accessible by using macrocycles as ligands, and their unique properties.

Exploring the Tunable Optical and Mechanical Properties of Multicomponent Low-Molecular-Weight Gelators.

A class of amino acid-based low-molecular-weight gelators (LMWGs) was used for single and multicomponent gel studies to investigate their tunable optical properties and their self-assembly process. The optical properties of multicomponent gels were found to be easily tuned by changing the proportion of the components, varying from opaque to highly transparent gels as analyzed using ultraviolet-visible spectroscopy. This phenomenon allows tunability without introducing another variable into the system. Scanning electron microscopy, differential scanning calorimetry, and small-angle X-ray scattering (SAXS) were used to investigate the structures of the gels. It was found that because of the structural similarities of the molecules, the gelators favor coassembly packing over self-sorting. The emergence of transparency was ascribed to changes in the fiber diameters. Moreover, analysis of the SAXS data allowed us to compare the molecular order present in the gel phase with single-crystal X-ray diffraction (SCXRD) data. Our analysis suggests that the packing of molecules seen in the crystalline phase is translated into the gel network. This reveals that the structure of the crystalline phase seen through SCXRD is a useful tool to aid in understanding the molecular packing in the gel phase.

Thermal Degradation of Cellulose Filaments and Nanocrystals.

Cellulose-derived materials, such as microcellulose and nanocellulose, are sustainable materials with a wide range of applications. Here, through a multi-analytical approach, we investigate the thermal degradation of microfibrillar cellulose filaments (CFs); acidic cellulose nanocrystals (CNC-H), containing sulfate half-ester groups on the surface; and neutralized cellulose nanocrystals (CNC-Na), where the protons are replaced by sodium ions. CFs have a simple degradation mechanism, associated with extensive dehydration, decarboxylation, and decarbonylation, and the highest thermal stability of the three (∼325 °C) despite the abundance of amorphous regions and inhomogeneous fibrous mass that make them structurally and morphologically less homogeneous than high-crystallinity CNCs. CNC-H decompose in a complex way below 200 °C, with large char fractions and evaporation of sulfur compounds at high temperatures, while sodium counterions in CNC-Na can improve the thermal stability up to 300 °C, where the pyrolysis leads to partial rehydration and formation of sodium hydroxide on the surface.

Iridescent Cellulose Nanocrystal Films Modified with Hydroxypropyl Cellulose.

The introduction of polymers into a chiral nematic cellulose nanocrystal (CNC) matrix allows for the tuning of optical and mechanical properties, enabling the development of responsive photonic materials. In this study, we explored the incorporation of hydroxypropyl cellulose (HPC) into a CNC film prepared by slow evaporation. In the composite CNC/HPC thin films, the CNCs adopt a chiral nematic structure, which can selectively reflect certain wavelengths of light to yield a colored film. The color could be tuned across the visible spectrum by changing the concentration or molecular weight of the HPC. Importantly, the composite films were more flexible than pure CNC films with up to a ten-fold increase in elasticity and a decrease in stiffness and tensile strength of up to six times and four times, respectively. Surface modification of the films with methacrylate groups increased the hydrophobicity of the films, and therefore, the water stability of these materials was also improved.

Cellulose Nanocrystal Elastomers with Reversible Visible Color.

Responsive photonic crystals have potential applications in mechanical sensors and soft displays; however, new materials are constantly desired to provide new innovations and improve on existing technologies. To address this, we report stretchable chiral nematic cellulose nanocrystal (CNC) elastomer composites that exhibit reversible visible color upon the application of mechanical stress. When stretched (or compressed) the colorless materials maintain their chiral nematic structure but the helical pitch is reduced into the visible region, resulting in coloration of the CNC-elastomer composite. By increasing the percentage elongation of the material (ca. 50-300 %), the structural color can be tuned from red to blue. The color of the materials was characterized by reflectance optical microscopy and reflectance circular dichroism to confirm the wavelength and polarization of the reflected light. We also probed the mechanism of the structural color using 2D-X-ray diffraction. Finally, by either water-patterning the starting CNC film, or by forming a CNC film with gradient color, through masked evaporation, we were able to prepare encoded stretchable chiral nematic CNC-elastomers.

Structural Elucidation of Selective Solvatochromism in a Responsive-at-Metal Cyclometalated Platinum(II) Complex.

We report the synthesis, characterization, and spectroscopic investigations of a new responsive-at-metal cyclometalated platinum(II) complex. With mild chemical oxidants and reductants, it was possible to obtain the same complex in three different oxidation states and each of these complexes was structurally characterized by single-crystal X-ray diffraction. We discovered that the platinum(II) complex displays strong solvatochromism in the solid state, which can be attributed to modulation of Pt⋅⋅⋅Pt interactions that results in switching between optical and photoluminescent states. Incorporating responsive-at-metal species as dynamic components in nanostructured materials might facilitate response amplification, sensing, actuation, or self-healing processes.

Host-Guest Chemistry Within Cellulose Nanocrystal Gel Receptors.

Cellulose nanocrystals (CNCs) spontaneously assemble into gels when mixed with a polyionic organic or inorganic salt. Here, we have used this ion-induced gelation strategy to create functional CNC gels with a rigid tetracationic macrocycle, cyclobis(paraquat-p-phenylene) (CBPQT4+ ). Addition of [CBPQT]Cl4 to CNCs causes gelation and embeds an active host inside the material. The fabricated CNC gels can reversibly absorb guest molecules from solution then undergo molecular recognition processes that create colorful host-guest complexes. These materials have been implemented in gel chromatography (for guest exchange and separation), and as elements to encode 2- and 3-dimensional patterns. We anticipate that this concept might be extended to design a set of responsive and selective gel-like materials functioning as, for instance, water-pollutant scavengers, substrates for chiral separations, or molecular flasks.

Post-modification of Cellulose Nanocrystal Aerogels with Thiol-Ene Click Chemistry.

The functionalization of cellulose nanocrystal (CNC) aerogels was achieved through a two-step synthetic procedure. CNC aerogels were prepared under hydrothermal conditions, followed by solvent exchange and critical point drying. The CNC aerogels were functionalized with a methacrylate group and then underwent thiol-ene click chemistry to impart a range of functionalities onto the surface of the CNC aerogel. The use of the functionalized aerogels as oil absorbents was then investigated, with the most hydrophobic CNC aerogel, 1 H,1 H,2 H,2 H-perfluorodecanethiol-functionalized CNC aerogel, exhibiting the highest absorption of xylenes at 2.9 mL g-1.

Solid-state 23Na NMR spectroscopy studies of ordered and disordered cellulose nanocrystal films.

Cellulose nanocrystal films with either disordered or chiral nematic structures of varying helical pitch were investigated using 23Na solid-state nuclear magnetic resonance (NMR) spectroscopy. Spin lattice relaxation of 1H correlated with 23Na analyzed by indirect observation using polarization transfer from 1H nuclei to 23Na nuclei showed that the Na+ cations are well hydrated in the cellulose nanocrystal films. Linewidth analysis in solid-state 23Na NMR showed that the Na+ cations move in confined spaces, and that the Na+ cations in the film having disordered structure are more dynamic than in the films having ordered structure. From lineshape analysis of the 23Na 2D nutation NMR spectra, we can distinguish the Na+ environments within the ordered and disordered films, and find trends in anisotropic interaction parameters between ordered samples with different pitches. These are the first detailed 23Na NMR spectroscopic studies of CNC-Na+ films, and they show that this technique may be a powerful probe for characterizing the extent of order in nanocellulose samples.

Intramolecular Hydrogen Bonds in Normal and Sterically Compressed o-Hydroxy Aromatic Aldehydes. Isotope Effects on Chemical Shifts and Hydrogen Bond Strength.

A number of o-hydroxy aromatic aldehydes have been synthesized to illustrate the effect of steric compression and O···O distances on the intramolecular hydrogen bond and the hydrogen bond energies. Hydrogen bond energies have been calculated using the 'hb and out' method using either the MP2 method or the B3LYP functional with the basis set 6-311++G(d,p). However, several compounds cannot be treated this way. Hydrogen bond energies are also determined using electron densities at bond critical points and these results are in good agreement with the results of the 'hb and out' model. Two-bond deuterium isotope effects on 13C chemical shifts are suggested as an experimental way to obtain information on hydrogen bond energies as they easily can be measured. Isotope effects on aldehyde proton chemical shifts have also been measured. The former show very good correlation with the hydrogen bond energies and the latter are related to short O···O distances. Short O···O distances can be obtained as the result of short C=C bond lengths, conjugative effects, and steric compression of the aldehyde group. Short O···O distances are in general related to high hydrogen bond energies in these intramolecularly hydrogen-bonded systems of resonance assisted hydrogen bond (RAHB) type.