Evaluating Pelvic Tilt Using the Pelvic Antero-Posterior Projection Images: A Systematic Review.

BACKGROUND: Pelvic tilt (PT) is a routinely evaluated parameter in hip and spine surgeries, and is usually measured on a sagittal pelvic radiograph. This may not always be feasible due to limitations such as landmark visibility, pelvic anomaly, and hardware presence. Tremendous efforts have been dedicated to using pelvic antero-posterior (AP) radiographs for assessing sagittal PT. Thus, this systematic review aimed to collect these methods and evaluate their performances. METHODS: Two independent reviewers searched the PubMed, Ovid, Cochrane, and Web of Science databases in June 2023 with backward reference trailing (Google Scholar archive). There were 30 studies recruited. Risk of bias was assessed using the prediction model risk of bias assessment tool. The relevant data were tabulated in a standardized form for evaluating either the absolute PT or relative PT. Disagreement was resolved by discussing with the senior author. RESULTS: There were 19 parameters from pelvic AP projection images involved, with 4 studies which used artificial intelligence, eyeball, or statistical shape method not involving a specific parameter. In comparing the PT values from pelvic sagittal images with those extrapolated from antero-posterior projection images, the highest correlation coefficient was found to be 0.91. The mean absolute difference (error) was 2.6°, with a maximum error reaching 10.9°. Most studies supported the feasibility of using AP parameters to calculate changes in PT. CONCLUSIONS: No individual AP parameter was found to precisely estimate absolute PT. However, relative PT can be derived by evaluating serial AP radiographs of a patient in varying postures, employing any AP parameters.

Clinical performance evaluation of a sensitive, rapid low-throughput test for KRAS mutation analysis using formalin-fixed, paraffin-embedded tissue samples.

BACKGROUND: Testing for KRAS mutations in metastatic colorectal cancer (mCRC) on formalin-fixed, paraffin embedded (FFPE) tumor tissue has become standard of care. Different molecular methods exist to determine hotspot KRAS mutations in exon 2, 3 and 4, but testing is often limited by the sensitivity and the speed of analysis. The aim of this retrospective study was to establish the clinical performance of the Idylla™ KRAS Mutation Test on FFPE tumor samples of patients with mCRC. METHODS: KRAS mutation analysis was performed using the therascreen KRAS on the RotorGene Q platform (CE-IVD; Qiagen) and results were subsequently compared to the Idylla™ KRAS Mutation Test. Discordant result testing was performed with massive parallel sequencing or alternative routine approaches. RESULTS: Data from 182 samples were used to show that the overall agreement between the two methods for mutation characterization was 96.7% [95%CI: 93.0%-98.5%]. Six out of 182 samples (3.3%) showed true discordant results. CONCLUSION: The Idylla™ KRAS Mutation Test allows for a fast and reliable analysis of FFPE samples with a turnaround-time of two hours without the need of molecular infrastructure or expertise in order to guide the personalized treatment of colorectal cancer patients.

Combining inertial navigation with transacetabular ligament in total hip arthroplasty via direct anterior approach results in excellent accuracy compared to standard manual technique - A retrospective cohort study.

BACKGROUND: Correct acetabular component placement plays a critical role in reducing early revisions after dislocations in total hip arthroplasty (THA). Although the transverse acetabular ligament (TAL) guides anteversion, inclination can only be accurately guided by navigation. In order to overcome the initial disadvantages with navigation, an imageless, easy-to-use inertial navigation system has been recently introduced. This study aims to analyze the accuracy of inclination with this navigation system compared to the standard manual technique. METHODS: Two cohorts, manual technique (MT) and navigation (NAV) cohorts, consisted of 83 and 95 patients, respectively, after exclusion criteria were applied. Inclination target was 38° and anteversion was guided by TAL. Demographic data were collected, and anteroposterior (AP) pelvic and cross-table lateral radiographs were obtained 6 weeks post-operatively. Inclination and anteversion were determined on the AP pelvic and cross-table lateral radiograph, respectively. RESULTS: A mean inclination of 41.8° (±6.8°) and 38.9° (±4.4°) was found in the MT and NAV cohorts, respectively. There was no statistical difference in gender, age, and BMI. If the inclination was set within 10° of the target (i.e., 38°), 88% of the MT cohort and 97% of the NAV cohort were within the target zone. Accuracy decreased to 53% and 83%, respectively, if the target zone range was narrowed down to ± 5°. CONCLUSION: Combining inertial imageless navigation for inclination and TAL as a landmark for anteversion is significantly more accurate compared to the manual technique, without having the limitations and disadvantages of current standard navigational techniques.

A Precise Prediction of the Chemical and Thermal Shrinkage during Curing of an Epoxy Resin.

A precise prediction of the cure-induced shrinkage of an epoxy resin is performed using a finite element simulation procedure for the material behaviour. A series of experiments investigating the cure shrinkage of the resin system has shown a variation in the measured cure-induced strains. The observed variation results from the thermal history during the pre-cure. A proposed complex thermal expansion model and a conventional chemical shrinkage model are utilised to predict the cure shrinkage observed with finite element simulations. The thermal expansion model is fitted to measured data and considers material effects such as the glass transition temperature and the evolution of the expansion with the degree of cure. The simulations accurately capture the exothermal heat release from the resin and the cure-induced strains across various temperature profiles. The simulations follow the experimentally observed behaviour. The simulation predictions achieve good accuracy with 2-6% discrepancy compared with the experimentally measured shrinkage over a wide range of cure profiles. Demonstrating that the proposed complex thermal expansion model affects the potential to minimise the shrinkage of the studied epoxy resin. A recommendation of material parameters necessary to accurately determine cure shrinkage is listed. These parameters are required to predict cure shrinkage, allow for possible minimisation, and optimise cure profiles for the investigated resin system. Furthermore, in a study where the resin movement is restrained and therefore able to build up residual stresses, these parameters can describe the cure contribution of the residual stresses in a component.

Advances in imaging for pre-surgical planning in hip resurfacing arthroplasty.

BACKGROUND: Accurate preoperative templating is essential for the success of hip resurfacing arthroplasty (HRA). While digital radiograph is currently considered the gold standard, stereoradiograph and CT converted 3D methods have shown promising results. However, there is no consensus in the literature regarding the preferred modality for HRA templating, and angular measurements are often overlooked. Thus, this study aimed to: (1) compare the performances of different modality in implant sizing and angle measurements, (2) evaluate the measurement reproducibility, (3) assess the impact of severe osteoarthritis on femoral head sizing, and (4) based on the analysis above, explore the optimal imaging and planning strategy for HRA. HYPOTHESIS: An optimal imaging modality exists for HRA planning regarding implant sizing and angular measurements. MATERIALS AND METHODS: Preoperative imaging data from seventy-seven HRA surgeries were collected. Three raters performed templating using digital radiograph, stereoradiograph, and CT converted 3D models. Measurements for femoral head size, neck-shaft angle, and calcar-shaft angle were obtained. The femoral head sizing was compared to the intraoperative clinical decision. The reproducibility of measurements was assessed using the intraclass correlation coefficient (ICC). Correlations were examined between sizing disagreement and osteoarthritis grade (Tonnis Classification). RESULTS: Digital radiograph, stereoradiograph, and 3D techniques predicted one size off target in 27/77 (35%), 49/70 (70%), and 75/77 (97%) of cases, respectively, corresponding to 1.8±1.6 (0 to 5.67), 0.9±0.7 (0 to 2.67), and 0.4±0.4 (0 to 1.67) sizes off target, indicating statistically significant differences among all three modalities, with p-values all below 0.01. There were no statistically significant differences among the different modalities for angular measurements. Measurements showed moderate to excellent reproducibility (ICC=0.628-0.955). High-grade osteoarthritis did not impact image sizing in any modality (r=0.08-0.22, all p>0.05). DISCUSSION: CT converted 3D models were more accurate for implant sizing in HRA, but did not significantly outperform other modalities in angular measurements. Given the high costs and increased radiation exposure associated with CT, the study recommended using CT scans selectively, particularly for precise femoral head sizing, while alternative imaging methods can be effectively used for angular measurements. LEVEL OF EVIDENCE: III; retrospective comparative diagnostic study.

Inadequate Annotation and Its Impact on Pelvic Tilt Measurement in Clinical Practice.

BACKGROUND: Accurate pre-surgical templating of the pelvic tilt (PT) angle is essential for hip and spine surgeries, yet the reliability of PT annotations is often compromised by human error, inherent subjectivity, and variations in radiographic quality. This study aims to identify challenges leading to inadequate annotations at a landmark dimension and evaluating their impact on PT. METHODS: We retrospectively collected 115 consecutive sagittal radiographs for the measurement of PT based on two definitions: the anterior pelvic plane and a line connecting the femoral head's centre to the sacral plate's midpoint. Five annotators engaged in the measurement, followed by a secondary review to assess the adequacy of the annotations across all the annotators. RESULTS: The outcomes indicated that over 60% images had at least one landmark considered inadequate by the majority of the reviewers, with poor image quality, outliers, and unrecognized anomalies being the primary causes. Such inadequacies led to discrepancies in the PT measurements, ranging from -2° to 2°. CONCLUSION: This study highlights that landmarks annotated from clear anatomical references were more reliable than those estimated. It also underscores the prevalence of suboptimal annotations in PT measurements, which extends beyond the scope of traditional statistical analysis and could result in significant deviations in individual cases, potentially impacting clinical outcomes.

Clinical Performance of the Idylla MSI Test for a Rapid Assessment of the DNA Microsatellite Status in Human Colorectal Cancer.

In this study, the clinical performance of the Idylla MSI test (investigational use only) was evaluated in 330 colorectal carcinoma samples (all stages). This test is fully automated, from formalin-fixed, paraffin-embedded slide to result, and gives a result in <2.5 hours. Compared with the Promega MSI Analysis System version 1.2, an overall agreement, sensitivity, and specificity of 99.7%, 98.7%, and 100%, respectively, was reached. Whereas seven samples were invalid with the Promega MSI Analysis System, only two were invalid with the Idylla MSI test. Compared with the historical immunohistochemistry (IHC) data, overall agreement, sensitivity, and specificity of 98.7%, 94.4%, and 100%, respectively, were observed. Tumor mutation burden analysis of the discordant IHC cases was in favor of the Idylla MSI test result in three of the four samples. Furthermore, for those cases where the IHC data were invalid or hard to interpret because sole loss of one DNA mismatch repair deficiency marker was observed, Idylla MSI test results were always valid and accurate. Herein, the Idylla MSI test has been shown to be an accurate, fast screening assay for the detection of microsatellite status in colorectal cancer patients, with a low number of invalid results.