pH-Sensitive Polydopamine-La (III) Complex Decorated on Carbon Nanofiber toward On-Demand Release Functioning of Epoxy Anti-Corrosion Coating.

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La extract had a total corrosion resistance (RT) of 3107 Ω cm2 after 24 h, which is much greater than the MS immersed in the blank solution (1378 Ω cm2). Furthermore, the potentiodynamic polarization analysis indicated a 50% reduction in the corrosion rate (CR) of the MS soaked in the solution containing released PDA and La3+ inhibitors compared to the blank solution. EIS and salt spray analysis were used to assess the self-healing capabilities of epoxy coatings incorporating modified CNFs. EIS assessment of scratched coatings revealed a 117% improvement in RT of the CNF-PDA-La/EP coating compared to the Blank/EP after 10 h of immersion in the saline solution. This enhancement is due to the intelligent release of PDA and La3+ inhibitors at the scratch sites, which can mitigate MS corrosion by forming a PDA-Fe complex and the deposition of La(OH)3 on the MS surface. The salt spray test results also exhibited the CNF-PDA-La/EP coating's superior anti-corrosion capabilities after 20 days. Hence, this research presents a logical approach for developing anti-corrosion coatings with improved nanofiller compatibility and self-healing characteristics.

Equivalent linear damping characterization in linear and nonlinear force-stiffness muscle models.

In the current research, the muscle equivalent linear damping coefficient which is introduced as the force-velocity relation in a muscle model and the corresponding time constant are investigated. In order to reach this goal, a 1D skeletal muscle model was used. Two characterizations of this model using a linear force-stiffness relationship (Hill-type model) and a nonlinear one have been implemented. The OpenSim platform was used for verification of the model. The isometric activation has been used for the simulation. The equivalent linear damping and the time constant of each model were extracted by using the results obtained from the simulation. The results provide a better insight into the characteristics of each model. It is found that the nonlinear models had a response rate closer to the reality compared to the Hill-type models.

Falcaria vulgaris leaves extract as an eco-friendly corrosion inhibitor for mild steel in hydrochloric acid media.

Undoubtedly, metal corrosion is one of the most challenging problems faced by industries. Introducing corrosion inhibitors is a reasonable approach to protecting the metal surface. Due to environmental concerns and the toxicity of industrial organic corrosion inhibitors, researchers are continually exploring acceptable replacements. The current study focused on the application of Falcaria Vulgaris (FV) leaves extract to mitigate mild steel (MS) corrosion in a 1 M HCl environment. The polarization findings demonstrated that the corrosion current density decreased from 264.0 µA/cm2 (for the sample submerged in the blank solution) to 20.4 µA/cm2 when the optimal concentration of 800 ppm of FV leaves extract was added to the acid solution. Electrochemical impedance spectroscopy (EIS) analysis revealed an inhibition efficiency of 91.3% at this concentration after 6 h of immersion. It was determined by analyzing several adsorption isotherms that this corrosion inhibitor obeys the Frumkin isotherm. AFM, FE-SEM, and GIXRD surface analyses also supported the findings that adding FV leaves extract can reduce metal damage by adsorption on the metal surface.

Corrosion inhibition of a novel antihistamine-based compound for mild steel in hydrochloric acid solution: experimental and computational studies.

Focused on the assessment of the diphenhydramine hydrochloride (DPH) capabilities as an alternative to conventional and harmful industrial corrosion inhibitors, electrochemical techniques were employed. The optimum concentration of 1000 ppm was determined by molecular simulation and validated through electrochemical experiments. The results acquired from the electrochemical impedance spectroscopy (EIS) study showed that DPH at a concentration of 1000 ppm has a corrosion efficiency of 91.43% after 6 h immersion. The DPH molecules' orientation on the surface was assessed based on EIS predicting horizontal adsorption on the surface. Molecular simulations were done to explore the adsorption mechanism of DPH. The DPH molecules' orientation on the surface was also assessed based on computational studies confirming the horizontal adsorption predicted by EIS.

Corrosion mitigation of mild steel in hydrochloric acid solution using grape seed extract.

Plant extracts have gained a lot of attention due to their ecofriendly nature for corrosion inhibition. In this study, we examined the inhibition performance of grape seed extract as an eco-environmental inhibitor for mild steel in hydrochloric acid medium. Electrochemical impedance spectroscopy, potentiodynamic polarization, and electrochemical noise techniques were employed to study mild steel's electrochemical behavior in the hydrochloric acid solutions containing grape seed extract. Results depicted that grape seed extract could successfully inhibit the corrosion of mild steel. Besides, water droplet contact angle, field-emission scanning electron microscopy coupled with energy dispersive spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy were utilized to study the surface of mild steel specimens after dipping in acidic solutions. Electrochemical impedance results showed a corrosion efficiency of about 88% in 300 ppm of grape seed extract. Also, results revealed more compact corrosion products with improved integrity in the presence of grape seed, which confirmed electrochemical test results.

Synthesis of graphene oxide nanosheets decorated by nanoporous zeolite-imidazole (ZIF-67) based metal-organic framework with controlled-release corrosion inhibitor performance: Experimental and detailed DFT-D theoretical explorations.

For the first time, the zeolite-imidazole (ZIF-67) framework, a new subfamily of metal-organic frameworks (MOFs), is synthesized on the graphene oxide (GO) platform. Co2+ (as a central atom) and 2-methylimidazole (as organic ligands) were assembled to fabricate ZIF-67/GO NPs for providing epoxy-based anti-corrosion coatings with both active (self-healing) and passive (barrier) performance. Also, the ZIF-67/GO NPs were modified by 3-Aminopropyl triethoxysilane (APS) to improve the particles compatibility with the epoxy matrix and control their solubility in saline media. The FE-SEM, FT-IR, UV-Vis, Raman, TGA, and low-angle XRD techniques were used to prove the successful ZIF-67 particles growth onto the GO platforms. Tafel (potentiodynamic) polarization test demonstrated that the ZIF-67/GO@APS NPs could protect the surface of steel through mixed anodic/cathodic type (O2 reduction/Fe oxidation) mechanisms and the corrosion current density of the iron sample decreased to 1.41 µA·cm-2. Interestingly, the epoxy coatings containing ZIF-67/GO and ZIF-67/GO@APS particles revealed long-term corrosion protection durability and outstanding self-healing anti-corrosion performance, which were well studied via EIS, salt spray, cathodic delamination, and pull-off techniques. The impedance value at the lowest frequency for the coating containing ZIF-67/GO@APS after 50 days decreased from 10.7â€¯Ω·cm2 to 10.2â€¯Ω·cm2 that showed the lowest reduction among the studied samples.

Cerium/diethyldithiocarbamate complex as a novel corrosion inhibitive pigment for AA2024-T3.

In this work, cerium-diethyldithiocarbamate (Ce-DEDTC) complex was synthesized as a novel anti-corrosion pigment. The structure of the synthesized pigment was characterized by employing Fourier transfer infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, and ultraviolet-visible spectroscopy. All of the characterization techniques showed that the Ce-DEDTC pigment was successfully produced. The electrochemical tests were used to investigate the subsequence effect of the synthesized complex on the corrosion behavior of the AA2024-T3. AA2024-T3 showed a wide passive range in the presence of the Ce-DEDTC pigment. Scanning electron microscopy, optical microscopy, X-ray photoelectron spectroscopy, and contact angle tests were employed to investigate the effect of the synthesized pigment on aluminum surface properties. The result illustrated that the existence of the Ce-DEDTC complex led to the creation of a thin film on the AA2024-T3 surface, which was significantly inhibited the localized corrosion of the aluminum alloy.

Designing a non-hazardous nano-carrier based on graphene oxide@Polyaniline-Praseodymium (III) for fabrication of the Active/Passive anti-corrosion coating.

In this work, graphene oxide (GO) based nano-platforms were applied as a non-hazardous solid container with high encapsulating capacity and controllable release activity of eco-friendly inhibitor. For the first time, the adsorption and release properties of the praseodymium cations (Pr3+) on GO nanosheets functionalized with polyaniline (PANI) were investigated. The Pr3+ cations adsorption/desorption capacity of GOPANI nano-sheets was assessed by Inductively Coupled Plasma (ICP), X-ray photoelectron spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FE-SEM), and High-resolution transmission electron microscopy (HR-TEM) techniques. The obtained results proved that the container modified with Pr3+ cations at pH of 7, 600 ppm of adsorpt, and 1 mg/cc of adsorbent dosage provided the highest capacity of inhibitors adsorption/release rates. The adsorption capacity of the GO-PANIs reached more than 500 mg/g. Also, the modified carrier desorbed about 70 % of loaded Pr3+ cations in the corrosion simulated condition. The self-healing anti-corrosion ability of the constructed containers in an organic-inorganic hybrid coating (OIHC) was shown by electrochemical analyses results. The resistance of coating with the loaded carriers has increased about 1 order of magnitude in comparison with the neat silane. Moreover, the scratched coatings containing the inhibitor loaded GO-PANIs showed extraordinary total resistance of about 25 Kohm. cm2.

Highly potent radical scavenging-anti-oxidant activity of biologically reduced graphene oxide using Nettle extract as a green bio-genic amines-based reductants source instead of hazardous hydrazine hydrate.

Reduced graphene oxide (rGO) is relied upon to be the most promising candidate for high-proficiency. Hydrazine is the most conventional efficient reducing agent that has been frequently used for reduction of graphene oxide, however, it is not environmentally safe due to its toxic nature, causing unsatisfactory defects on the basal plan of GO. Therefore, employing green and efficient reducing agents from natural sources like plant extracts has become the research interest for obtaining high quality reduced graphene oxide sheets in recent years. Here a one-step, easy, cost-effective and green synthesis method based on Nettle leaves' extract has been introduced as an effective reduction method of graphene oxide compared with the toxic and harmful Hydrazine hydrate substance. In this study, GO and rGO were obtained from various methods and characterized by Raman spectroscopy, field emission scanning electron microscope, high-resolution transmission electron microscope (HR-TEM), X-ray diffraction analysis (XRD) and X-ray photon spectroscopy (XPS) analysis. Results of different analytical techniques revealed that the Nettle leaves' extract could successfully reduce GO sheets to high performance reduced graphene oxide with 79% efficiency in comparison with conventional Hydrazine hydrate. On the other side the rGO obtained by Nettle solution could scavenge the free radicals with 70% inhibition capacity at least concentration. Existence of Histamine and Serotonin and many other polyphenols as a part of Nettle leaves composition by following anti-oxidants mechanisms (H donation or electron transfer) promote the anti-oxidant functionality of Nettle leaves. So the highlighted achievement of this paper is to obtain a highly anti-oxidant green reduced graphene oxide with a wide applications i.e medical and polymer composite with UV-shielding activity.