In vivo evaluation of biomimetic fluorosurfactant polymer-coated expanded polytetrafluoroethylene vascular grafts in a porcine carotid artery bypass model.

OBJECTIVE: The objective of this study was to evaluate the potential for biomimetic self-assembling fluorosurfactant polymer (FSP) coatings incorporating heptamaltose (M7-FSP) to block nonspecific protein adsorption, the cell adhesive RGD peptide (RGD-FSP), or the endothelial cell-selective CRRETAWAC peptide (cRRE-FSP) to improve patency and endothelialization in small-diameter expanded polytetrafluoroethylene (ePTFE) vascular graft implants. METHODS: ePTFE vascular grafts (4 mm in diameter, 5 cm in length) were coated with M7-FSP, RGD-FSP, or cRRE-FSP by dissolving FSPs in distilled water and flowing solution through the graft lumen for 24 hours. Coatings were confirmed by receding water contact angle measurements on the lumen surface. RGD-FSP and cRRE-FSP grafts were presodded in vitro with porcine pulmonary artery endothelial cells (PPAECs) using a custom-designed flow system. PPAEC coverage on the lumen surface was visualized with epifluorescent microscopy and quantified. Grafts were implanted as carotid artery interposition bypass grafts in seven pigs for 33 ± 2 days (ePTFE, n = 3; M7-FSP, n = 4; RGD-FSP, n = 3; cRRE-FSP, n = 4). Patency was confirmed immediately after implantation with duplex color flow ultrasound and at explantation with contrast-enhanced angiography. Grafts were sectioned for histology and stained: Movat pentachrome stain to outline vascular layers, immunofluorescent staining to identify endothelial cells (anti-von Willebrand factor antibody), and immunohistochemical staining to identify smooth muscle cells (anti-smooth muscle α-actin antibody). Neointima to lumen area ratio was determined to evaluate neointimal hyperplasia. RESULTS: Receding water contact angle measurements on graft luminal surfaces were significantly lower (P < .05) on FSP-coated ePTFE surfaces (M7-FSP, 40 ± 16 degrees; RGD-FSP, 25 ± 10 degrees; cRRE-FSP, 33 ± 16 degrees) compared with uncoated ePTFE (126 ± 2 degrees), confirming presence of the FSP layer. In vitro sodding of PPAECs on RGD-FSP and cRRE-FSP grafts resulted in a confluent monolayer of PPAECs on the luminal surface, with a similar cell population on RGD-FSP (1200 ± 187 cells/mm(2)) and cRRE-FSP (1134 ± 153 cells/mm(2)) grafts. All grafts were patent immediately after implantation, and one of three uncoated, two of three RGD-FSP, two of four M7-FSP, and two of four cRRE-FSP grafts remained patent after 1 month. PPAEC coverage of the lumen surface was seen in all patent grafts. RGD-FSP grafts had a slightly higher neointima to lumen area ratio (0.53 ± 0.06) compared with uncoated (0.29 ± 0.15), M7-FSP (0.20 ± 0.15), or cRRE-FSP (0.17 ± 0.09) grafts. CONCLUSIONS: Biomimetic FSP-coated ePTFE grafts can be used successfully in vivo and have potential to support endothelialization. Grafts modified with the M7-FSP and cRRE-FSP showed lower intimal hyperplasia compared with RGD-FSP grafts.

Biomimetic poly(ethylene glycol)-based hydrogels as scaffolds for inducing endothelial adhesion and capillary-like network formation.

The extracellular matrix (ECM) is an attractive model for designing synthetic scaffolds with a desirable environment for tissue engineering. Here, we report on the synthesis of ECM-mimetic poly(ethylene glycol) (PEG) hydrogels for inducing endothelial cell (EC) adhesion and capillary-like network formation. A collagen type I-derived peptide GPQGIAGQ (GIA)-containing PEGDA (GIA-PEGDA) was synthesized with the collagenase-sensitive GIA sequence attached in the middle of the PEGDA chain, which was then copolymerized with RGD capped-PEG monoacrylate (RGD-PEGMA) to form biomimetic hydrogels. The hydrogels degraded in vitro with the rate dependent on the concentration of collagenase and also supported the adhesion of human umbilical vein ECs (HUVECs). Biomimetic RGD/GIA-PEGDA hydrogels with incorporation of 1% RGD-PEGDA into GIA-PEGDA hydrogels induced capillary-like organization when HUVECs were seeded on the hydrogel surface, while RGD/PEGDA and GIA-PEGDA hydrogels did not. These results indicate that both cell adhesion and biodegradability of scaffolds play important roles in the formation of capillary-like networks.

Effect of neutrophil adhesion on the mechanical properties of lung microvascular endothelial cells.

Neutrophil adhesion to pulmonary microvascular endothelial cells (ECs) initiates intracellular signaling, resulting in remodeling of F-actin cytoskeletal structure of ECs. The present study determined the mechanical properties of ECs and the changes induced by neutrophil adhesion by atomic force microscopy. The elastic moduli of ECs were compared before neutrophils were present, as soon as neutrophil adhesion was detected, and 1 minute later. ECs that were adjacent to those with adherent neutrophils were also evaluated. Neutrophil adhesion induced a decrease in the elastic moduli in the 6.25-µm rim of ECs surrounding adherent neutrophils as soon as firmly adherent neutrophils were detected, which was transient and lasted less than 1 minute. Adjacent ECs developed an increase in stiffness that was significant in the central regions of these cells. Intercellular adhesion molecule-1 crosslinking did not induce significant changes in the elastic modulus of ECs in either region, suggesting that crosslinking intercellular adhesion molecule-1 is not sufficient to induce the observed changes. Our results demonstrate that neutrophil adhesion induces regional changes in the stiffness of ECs.

Design and synthesis of biomimetic hydrogel scaffolds with controlled organization of cyclic RGD peptides.

We report on the rational design and synthesis of a new type of bioactive poly(ethylene glycol) diacrylate (PEGDA) macromers, cyclic Arg-Gly-Asp (cRGD)-PEGDA, to mimic the cell-adhesive properties of extracellular matrix (ECM), aiming to create biomimetic scaffolds with controlled spatial organization of ligands and enhanced cell binding affinity for tissue engineering. To attach the cRGD peptide in the middle of PEGDA chain, a tailed cRGD peptide, c[RGDfE(SSSKK-NH2)] (1), was synthesized with c(RGDfE) linked to a tail of SSSKK. The tail consists of a spacer with three serine residues and a linker with two lysine residues for conjugating with acryloyl-PEG-NHS (5) to create cRGD-PEGDA (6). cRGD-PEGDA possesses good photopolymerization ability to fabricate hydrogel scaffolds under UV radiation. Surface morphology and composition analysis demonstrates that cRGD-PEGDA hydrogels were well-constructed with porous three-dimensional (3D) structures and uniform distribution of cRGD ligands. Our results show that cRGD-PEGDA hydrogels facilitate endothelial cell (EC) adhesion and spreading on the hydrogel surfaces and exhibit significantly higher EC population in comparison with linear RGD-modified hydrogels at low peptide incorporation. Since ligand presentation in biomimetic scaffolds plays an important role in controlling cell behavior, cRGD-PEGDA has great advantages of controlling hydrogel properties and ligand spatial organization in the resulting scaffolds. Furthermore, cRGD-PEGDA is an attractive candidate for the future development of tissue engineering scaffolds with optimum cell adhesive strength and ligand density.

Changes in the hyperelastic properties of endothelial cells induced by tumor necrosis factor-alpha.

Mechanical properties of living cells can be determined using atomic force microscopy (AFM). In this study, a novel analysis was developed to determine the mechanical properties of adherent monolayers of pulmonary microvascular endothelial cells (ECs) using AFM and finite element modeling, which considers both the finite thickness of ECs and their nonlinear elastic properties, as well as the large strain induced by AFM. Comparison of this model with the more traditional Hertzian model, which assumes linear elastic behavior, small strains, and infinite cell thickness, suggests that the new analysis can predict the mechanical response of ECs during AFM indentation better than Hertz's model, especially when using force-displacement data obtained from large indentations (>100 nm). The shear moduli and distensibility of ECs were greater when using small indentations (<100 nm) compared to large indentations (>100 nm). Tumor necrosis factor-alpha induced changes in the mechanical properties of ECs, which included a decrease in the average shear moduli that occurred in all regions of the ECs and an increase in distensibility in the central regions when measured using small indentations. These changes can be modeled as changes in a chain network structure within the ECs.

Molecular engineering of supramolecular scaffold coatings that can reduce static platelet adhesion.

Novel supramolecular coatings that make use of low-molecular weight ditopic monomers with guanine end groups are studied using fluid tapping AFM. These molecules assemble on highly oriented pyrolytic graphite (HOPG) from aqueous solutions to form nanosized banding structures whose sizes can be systematically tuned at the nanoscale by tailoring the molecular structure of the monomers. The nature of the self-assembly in these systems has been studied through a combination of the self-assembly of structural derivatives and molecular modeling. Furthermore, we introduce the concept of using these molecular assemblies as scaffolds to organize functional groups on the surface. As a first demonstration of this concept, scaffold monomers that contain a monomethyl triethyleneglycol branch were used to organize these "functional" units on a HOPG surface. These supramolecular grafted assemblies have been shown to be stable at biologically relevant temperatures and even have the ability to significantly reduce static platelet adhesion.

Affinity manipulation of surface-conjugated RGD peptide to modulate binding of liposomes to activated platelets.

Platelet adhesion, activation and fibrinogen-mediated aggregation are primary events in vascular thrombosis and occlusion. An injectable delivery system that can carry thrombolytics selectively to the sites of active platelet aggregation has immense potential in minimally invasive targeted therapy of vascular occlusion. To this end we are studying liposomes surface-modified by fibrinogen-mimetic RGD motifs that can selectively target and bind integrin GPIIb-IIIa on activated platelets. Here we report liposome surface-modification with a conformationally constrained high affinity cyclic RGD motif to modulate the GPIIb-IIIa-binding capability of the liposomes. Such affinity enhancement is important for practical in vivo applications to compete with native fibrinogen towards binding GPIIb-IIIa. The platelet-binding of RGD-modified liposomes was studied by fluorescence and scanning electron microscopy, and flow cytometry, in vitro. Binding of RGD-modified liposomes was also tested in vivo in a rat carotid injury model and analyzed ex vivo by fluorescence microscopy. The results from all experiments show that cyclic RGD-liposomes bind activated platelets significantly higher compared to linear RGD-liposomes. Hence, the results establish the feasibility of modulating the platelet-targeting and binding ability of vascularly targeted liposomes by manipulating the affinity of surface-modifying ligands.

A biomimetic peptide fluorosurfactant polymer for endothelialization of ePTFE with limited platelet adhesion.

Endothelialization of expanded polytetrafluoroethylene (ePTFE) has the potential to improve long-term patency for small-diameter vascular grafts. Successful endothelialization requires ePTFE surface modification to permit cell attachment to this otherwise non-adhesive substrate. We report here on a peptide fluorosurfactant polymer (FSP) biomimetic construct that promotes endothelial cell (EC)-selective attachment, growth, shear stability, and function on ePTFE. The peptide FSP consists of a flexible poly(vinyl amine) backbone with EC-selective peptide ligands for specific cell adhesion and pendant fluorocarbon branches for stable anchorage to underlying ePTFE. The EC-selective peptide (primary sequence: Cys-Arg-Arg-Glu-Thr-Ala-Trp-Ala-Cys, CRRETAWAC) has demonstrated high binding affinity for the alpha(5)beta(1) integrin found on ECs. Here, we demonstrate low affinity of CRRETAWAC for platelets and platelet integrins, thus providing it with EC-selectivity. This EC-selectivity could potentially facilitate rapid in vivo endothelialization and healing without thrombosis for small-diameter ePTFE vascular grafts.

Surface-dependent expression in the platelet GPIb binding domain within human von Willebrand factor studied by atomic force microscopy.

Adsorption of plasma proteins such as von Willebrand factor (vWF) on thrombogenic surfaces can induce conformational changes in tertiary structure so that the prothrombotic functional epitopes are exposed for interactions with platelets, resulting in platelet adhesion and thrombus formation. Thus, understanding platelet binding following changes in the structure of vWF is critical in understanding the mechanisms of thrombogenesis. The present study examined the accessibility of platelet binding epitopes within vWF adsorbed on two different thrombogenic surfaces, a hydrophobic synthetic surface and collagen VI coated substrates, under physiological buffer conditions using atomic force microscopy (AFM) in combination with immunogold labeling. Our results demonstrated that the glycoprotein Ib (GPIb) binding domain in vWF undergoes changes when adsorbed on collagen VI compared to vWF on a hydrophobic synthetic surface. This study provides a basis for a novel approach to understand the molecular mechanisms of surface-induced thrombosis by directly examining the structure-function relationships of plasma proteins involved in the thrombus formation.

Vesicle size and stability of biomimetic liposomes from 3'-sulfo-Lewis a (SuLea) containing glycolipids.

We report on the use of a natural Lewis type saccharide ligand, 3'-sulfo-Lewis a (SuLe(a)) for glycocalyx-mimetic surface modification of liposomes. Two SuLe(a)-containing glycolipids, monovalent SuLe(a)-lipid and trivalent SuLe(a) (TSuLe(a))-lipid, were synthesized, and used with 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol to prepare unilaminar vesicles (ULVs) by a freeze-thaw and extrusion method. The effects of the glycolipid concentrations and the pore sizes of extrusion membranes on vesicle size and stability were investigated by photon correlation spectroscopy (PCS). Glycoliposomes, with 5% SuLe(a)- or TSuLe(a)-lipids obtained by 50 nm extrusion, had 25-30% more vesicles less than 100 nm in diameter compared with the 100 nm extrusion. TSuLe(a)-liposomes always produced larger vesicle size than SuLe(a)-liposomes, which we attribute to the larger TSuLe(a) headgroup. Both SuLe(a)- and TSuLe(a)-liposomes increased their vesicle size with increasing glycolipid concentration from 5% to 15%, and demonstrated good stability at room temperature for over 1 month. Further increasing the glycolipid concentration to 20% resulted in large vesicle aggregation after 5 days for TSuLe(a)-liposomes, while the SuLe(a)-liposomes remained stable for 10 days. SuLe(a)- and TSuLe(a)-liposomes with 15% glycolipids demonstrated better stability due to the electrostatic effect from the negatively charged SuLe(a) and TSuLe(a) headgroups. The results indicate that the biomimetic liposomes with SuLe(a)- and TSuLe(a)-lipids with 5 to 15% incorporation are sufficiently stable for the potential applications in targeted drug delivery.

The effect of RGD fluorosurfactant polymer modification of ePTFE on endothelial cell adhesion, growth, and function.

We have synthesized and characterized a novel peptide fluorosurfactant polymer (PFSP) modification that facilitates the adhesion and growth of endothelial cells on expanded polytetrafluoroetheylene (ePTFE) vascular graft material. This PFSP consists of a poly(vinyl amine) (PVAm) backbone with integrin binding Arg-Gly-Asp (RGD) peptides and perfluorocarbon pendant branches for adsorption and stable adhesion to underlying ePTFE. Aqueous PFSP solution was used to modify the surface of fluorocarbon substrates. Following subconfluent seeding, endothelial cell (EC) adhesion and growth on PFSP was assessed by determining cell population at different time points. Spectroscopic results indicated successful synthesis of PFSP. PFSP modification of ePTFE reduced the receding water contact angle measurement from 120 degrees to 6 degrees , indicating successful surface modification. Quantification of cell population demonstrated reduced EC attachment efficiency but increased growth rate on RGD PFSP compared with fibronectin (FN). Actin staining revealed a well-developed cytoskeleton for ECs on RGD PFSP indicative of stable adhesion. Uptake of acetylated low-density lipoprotein and positive staining for VE-Cadherin confirm EC phenotype for adherent cells. Production of prostacyclin, a potent antiplatelet agent, was equivalent between ECs on FN and RGD PFSP surfaces. Our results indicate successful synthesis and surface modification with PFSP; this is a simple, quantitative, and effective approach to modifying ePTFE to encourage endothelial cell attachment, growth, and function.

Effects of biomaterial surface chemistry on the adhesion and biofilm formation of Staphylococcus epidermidis in vitro.

The formation of biofilm, a structured community of bacteria enclosed in slime, is a significant virulence factor in medical-device-centered infection. The development of cardiovascular device infection can be separated into two phases: initial bacterial adhesion and aggregation, followed by proliferation and production of slime. It is possible to modulate the adhesion and biofilm formation of Staphylococcus epidermidis, a commensal skin bacterium commonly found on infected medical devices, through biomaterial surface chemistry. This study examines bacterial adhesion and biofilm formation on surface-modified polyethylene terephthalate (PET), including surfaces with varying hydrophilic, hydrophobic, and ionic character. Bacterial adhesion and biofilm formation were observed over 48 hours in phosphate-buffered saline (PBS) and 20% pooled human serum. The hydrophilic surface (PAAm) had significantly less nonspecific adhesion of bacteria than that in the control (PET) and other surfaces, when cultured in PBS (P < 0.0001). Charged surfaces, both anionic and cationic, had increased adhesion and aggregation of bacteria in comparison with the control (PET) in the presence of serum proteins over 24 hours (P < 0.0001). Bacteria cultured in serum on the charged surfaces did not have significantly different amounts of biofilm formation compared with that of the control (PET) surface after 48 hours. This study showed that biomaterial surface chemistry characteristics impact initial adhesion and aggregation of S. epidermidis on biomaterials.

Dual biofunctional polymer modifications to address endothelialization and smooth muscle cell integration of ePTFE vascular grafts.

Expanded polytetrafluoroethylene (ePTFE) grafts were coated on the luminal surface with a cell-adhesive fluorosurfactant (FSP) polymer to promote endothelialization, followed by ethanol hydration to degas the pores and subsequent cell-adhesive, enzymatically degradable poly(ethylene glycol)-based hydrogel incorporation into the graft interstices to accommodate potential smooth muscle cell integration in the graft wall. The FSP coating on ePTFE was stable as demonstrated by a significantly reduced receding water contact angle on FSP-coated ePTFE (14.5 ± 6.4°) compared to uncoated ePTFE (105.3 ± 4.5°, P < 0.05) after ethanol exposure. X-ray photoelectron spectroscopy analysis of the same surfaces confirmed FSP presence. Localization of the FSP and hydrogel within the ePTFE graft construct was assessed using fluorescently labeled polymers, and demonstrated hydrogel infiltration throughout the thickness of the graft wall, with FSP coating limited to the lumen and adventitial surfaces. FSP at the luminal surface on dual-coated grafts was able to bind endothelial cells (EC) (98.7 ± 23.1 cells/mm(2) ) similar to fibronectin controls (129.4 ± 40.7 cells/mm(2) ), and significantly higher than uncoated ePTFE (31.6 ± 19 cells/mm(2,) P < 0.05). These results indicate that ePTFE grafts can be simultaneously modified with two different polymers that have potential to directly address both endothelialization and intimal hyperplasia. Such a construct is a promising candidate for an off-the-shelf synthetic graft for small-diameter graft applications.

pH-dependent amyloid and protofibril formation by the ABri peptide of familial British dementia.

The ABri is a 34 residue peptide that is the major component of amyloid deposits in familial British dementia. In the amyloid deposits, the ABri peptide adopts aggregated beta-pleated sheet structures, similar to those formed by the Abeta peptide of Alzheimer's disease and other amyloid forming proteins. As a first step toward elucidating the molecular mechanisms of the beta-amyloidosis, we explored the ability of the environmental variables (pH and peptide concentration) to promote beta-sheet fibril structures for synthetic ABri peptides. The secondary structures and fibril morphology were characterized in parallel using circular dichroism, atomic force microscopy, negative stain electron microscopy, Congo red, and thioflavin-T fluorescence spectroscopic techniques. As seen with other amyloid proteins, the ABri fibrils had characteristic binding with Congo red and thioflavin-T, and the relative amounts of beta-sheet and amyloid fibril-like structures are influenced strongly by pH. In the acidic pH range 3.1-4.3, the ABri peptide adopts almost exclusively random structure and a predominantly monomeric aggregation state, on the basis of analytical ultracentrifugation measurements. At neutral pH, 7.1-7.3, the ABri peptide had limited solubility and produced spherical and amorphous aggregates with predominantly beta-sheet secondary structure, whereas at slightly acidic pH, 4.9, spherical aggregates, intermediate-sized protofibrils, and larger-sized mature amyloid fibrils were detected by atomic force microscopy. With aging at pH 4.9, the protofibrils underwent further association and eventually formed mature fibrils. The presence of small amounts of aggregated peptide material or seeds encourage fibril formation at neutral pH, suggesting that generation of such seeds in vivo could promote amyloid formation. At slightly basic pH, 9.0, scrambling of the Cys5-Cys22 disulfide bond occurred, which could lead to the formation of covalently linked aggregates. The presence of the protofibrils and the enhanced aggregation at slightly acidic pH is consistent with the behavior of other amyloid-forming proteins, which supports the premise that a common mechanism may be involved in protein misfolding and beta-amyloidosis.

RGD-modified liposomes targeted to activated platelets as a potential vascular drug delivery system.

Local drug delivery has become an important treatment modality for the prevention of thrombotic events following coronary angioplasty. In this study, we investigate the ability of liposomes bearing surface conjugated linear Arg-Gly-Asp (RGD) peptide (GSSSGRGDSPA) moieties to target and bind activated platelets, and the effect of such RGD-modified liposomes on platelet activation and aggregation. The binding of RGD-liposomes to human platelets was assessed by fluorescence microscopy, phase contrast microscopy and flow cytometry. The effect of RGD-modified liposomes on platelet activation and aggregation was investigated in vitro, with and without platelet agonists. RGD-liposomes were found to bind activated platelets at levels significantly greater than the control RGE-liposomes. The RGD-liposomes did not exhibit any statistically significant effect on platelet activation or aggregation. The results demonstrate the ability of the RGD-modified liposomes to target and bind activated platelets without causing significant platelet aggregation and suggests a feasible way for the development of a platelet-targeted anti-thrombogenic drug delivery system. Furthermore, the approach can be extended to the development of liposomes for other vascular targets, for application in drug delivery or gene therapy.

Human endothelial cell interaction with biomimetic surfactant polymers containing Peptide ligands from the heparin binding domain of fibronectin.

Biomimetic materials that mimic the extracellular matrix (ECM) provide a means to control cellular functions such as adhesion and growth, which are vital to successful engineering of tissue-incorporated biomaterials. Novel "ECM-like" biomimetic surfactant polymers consisting of a poly(vinyl amine) backbone with pendant cell-adhesive peptides derived from one of the heparin-binding domains of fibronectin were developed to improve endothelial cell adhesion and growth on vascular biomaterials. Heparin-binding peptide (HBP) sequences, alone and in combination with RGD peptides, were examined for their ability to promote human pulmonary artery endothelial cell (HPAEC) adhesion and growth (HBP1, WQPPRARI; HBP2, SPPRRARVT; HBP1:RGD; and HBP2:RGD) and compared with cell adhesion and growth on fibronectin and on negative control polymer surfaces in which alanines were substituted for the positively charged arginine residues in the two peptides. The results showed that HPAECs adhered and spread equally well on all HBP-containing polymers and the positive fibronectin control, showing similar stress fiber and focal adhesion formation. However, the HBP alone was unable to support long-term HPAEC growth and survival, showing a loss of focal adhesions and cytoskeletal disorganization by 24 h after seeding. With the addition of RGD, the surfaces behaved similarly or better than fibronectin. The negative control polymers showed little to no initial cell attachment, and the addition of soluble heparin to the medium reduced initial cell adhesion on both the HBP2 and HBP2:RGD surfaces. These results indicate that the HBP surfaces promote initial HPAEC adhesion and spreading, but not long-term survival.

Pentaerythritol as the core of multivalent glycolipids: synthesis of a glycolipid with three SO3Lea ligands.

A glycolipid containing three SO(3)Le(a) ligands was synthesized with pentaerythritol as the core. The glycolipid was used to prepare glycoliposomes that showed stability similar to that of DSPC liposomes without glycolipid. The easily prepared derivatives of pentaerythritol proved to be useful scaffolds for multivalent displaying of carbohydrates in the form of glycolipids and clustered glycoliposomes. [structure: see text]

Surface modification of liposomes by saccharides: vesicle size and stability of lactosyl liposomes studied by photon correlation spectroscopy.

The cell glycocalyx is an attractive model for surface modification of liposomes, because its hydrated oligosaccharide layer inhibits nonspecific protein adsorption and can provide specificity towards desired sites. Here, we report on the use of lactose as a model saccharide to modify the liposome surface and examine the vesicle size and stability. Two kinds of lactosyl lipids, including lactosyl ether-lipid (6a) and lactosyl ester-lipid (6b), which contain octadecyl and octadecanoyl as the lipid tails, respectively, were synthesized and their liposomes were prepared by the extrusion method. The effects of glycolipid structure, concentration, and the pore size of the extrusion membrane on vesicle size and stability were investigated at room temperature by photon correlation spectroscopy (PCS). All liposomes with 5 or 10 mol% of lactosyl lipids had a narrow size distribution and remained stable at room temperature for at least one month, which is comparable to 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC)- and poly(ethylene glycol) (PEG)-liposomes. The maximum incorporation of lactosyl ester-lipid into liposomes was 15 mol%, compared with only 10 mol% for the lactosyl ether-lipid. The lactosyl ester-liposomes had better stability and exhibited less size change than the lactosyl ether-liposomes at 15 or 20 mol% of lactosyl lipids incorporated. This may be attributed to the better structural compatibility of lactosyl ester-lipid with DSPC. The PCS results show that the glycolipid structure and concentrations are major factors that affect vesicle stability, while the pore size of extrusion membranes has no influence.

Photoinitiator-free synthesis of endothelial cell-adhesive and enzymatically degradable hydrogels.

We report on a photoinitiator-free synthetic method of incorporating bioactivity into poly(ethylene glycol) (PEG) hydrogels in order to control physical properties, enzymatic biodegradability and cell-specific adhesiveness of the polymer network, while eliminating the need for UV-mediated photopolymerization. To accomplish this, hydrogel networks were polymerized using Michael addition with four-arm PEG acrylate (10 kDa), using a collagenase-sensitive peptide (CSP) as a crosslinker, and introducing an endothelial cell-adhesive peptide either terminally (RGD) or attached to the crosslinking peptide sequence (CSP-RGD). The efficiency of the Michael addition reactions were determined by nuclear magnetic resonance and Ellman's assay. Successful decoupling of cell adhesivity and physical properties was demonstrated by quantifying and comparing the swelling ratios and Young's moduli of various hydrogel formulations. Degradation profiles were established by incubating functionalized hydrogels in collagenase solutions (0.0-1.0 µg ml(-1)), demonstrating that functionalized hydrogels degraded at a rate dependent upon collagenase concentration. Moreover, it was shown that the degradation rate was independent of CSP-RGD concentration. Cell attachment and proliferation on functionalized hydrogels were compared for various RGD concentrations, providing evidence that cell attachment and proliferation were directly related to relative amounts of the CSP-RGD combination peptide. An increase in cell viability was achieved using Michael addition techniques when compared to UV polymerization, and was assessed by a LIVE/DEAD fluorescence assay. This photoinitiator-free method shows promise in creating hydrogel-based tissue engineering scaffolds allow for decoupled cell adhesivity and physical properties and that render greater cell viability.

Integrin-dependent interaction of human vascular endothelial cells on biomimetic peptide surfactant polymers.

Biomimetic surfactant polymers designed by molecular grafting of pendant RGD peptides (Pep) and dextran oligosaccharides (Dex) in different ratios onto the backbone of poly(vinyl amine) (PVAm) were examined for their ability to promote endothelial cell (EC) growth. Adhesion, formation of focal contacts, and expression of integrin receptors were examined in EC seeded onto a series of novel surfactants containing 100% dextran (PVAm[Pep (0%)]) to 100% peptide (PVAm[Pep (100%)]) compared to fibronectin control. Interaction of EC on polymer was specific, as soluble GRGDSP, but not GRGESP, was able to inhibit both adhesion and spreading of EC. At three hours, EC attachment and spreading were rapid and comparable on fibronectin and PVAm[Pep (100%)], rounded on PVAm[Pep (0%)], and intermediate on PVAm[Pep (25%)], (PVAm[Pep (50%)], and PVAm[Pep (75%)], with increasing peptide ratio favoring more spreading, although all the substrates had similar hydrophilicity. Cells that spread well on fibronectin and PVAm[Pep (100%)] had sharp spikes of vinculin localized at the termination point of actin stress fibers. Formation of stress fibers and focal adhesions on other substrates were correlated with spreading pattern of EC and the peptide content. EC seeded on fibronectin expressed alpha5beta1 integrins all along the stress fibers and throughout the entire cytoskeleton, but this distribution pattern was less prominent on PVAm[Pep (100%)]. However, expression and distribution of vitronectin receptors (alpha(v)beta3) were similar on both fibronectin and PVAm[Pep (100%)], suggesting a strong cell adhesion on PVAm[Pep (100%)]. Viability of EC was also comparable on both fibronectin and PVAm[Pep (100%)] at 24 h. Substrates with high proportion of dextran limited cell adhesion, probably by decreasing protein adsorption. These results suggest that it may be possible to engineer substrates that promote cell adhesion in a receptor-dependent manner while blocking nonspecific protein adsorption, which may have potential as interface materials for prostheses used in cardiovascular system.