Preparation and Characterization of Conductive Polymer Blends of Polypyrrole and Poly(ethylene oxide).

Conductive polymer blends of polypyrrole (PPy) and poly(ethylene oxide) (PEO) were obtained in the form of films and fibers, respectively by solvent casting and electrospinning. Different amounts of PPy were introduced in the blends in order to study the effect of the conductive polymer on the properties of the final material and in particular to elucidate the influence of the different morphology on conductivity. The structure and morphology of PPy/PEO blends were characterized by wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to understand the influence of different PPy content on thermal behavior and stability, electrospun fibrous mats were examined by scanning electron microscopy (SEM). The conductivity of the films and fibrous mats was measured and correlation with morphology was highlighted.

High-Purity Hybrid Organolead Halide Perovskite Nanoparticles Obtained by Pulsed-Laser Irradiation in Liquid.

Nanoparticles of hybrid organic-inorganic perovskites have attracted a great deal of attention due to their variety of optoelectronic properties, their low cost, and their easier integration into devices with complex geometry, compared with microcrystalline, thin-film, or bulk metal halides. Here we present a novel one-step synthesis of organolead bromide perovskite nanocrystals based on pulsed-laser irradiation in a liquid environment (PLIL). Starting from a bulk CH3 NH3 PbBr3 crystal, our PLIL procedure does not involve the use of high-boiling-point polar solvents or templating agents, and runs at room temperature. The resulting nanoparticles are characterized by high crystallinity and are completely free of any microscopic product or organic coating layer. We also demonstrate the straightforward inclusion of laser-generated perovskite nanocrystals in a polymeric matrix to form a nanocomposite with single- and two-photon luminescence properties.

Polyvinyl alcohol electrospun nanofibers containing Ag nanoparticles used as sensors for the detection of biogenic amines.

Polyvinyl alcohol (PVA) electrospun nanofibers containing Ag nanoparticles (NPs) have been deposited on glass substrates. The aim of the work was to test the feasibility of this approach for the detection of biogenic amines by using either the Ag localized surface plasmon resonance quenching caused by the adsorption of amines on Ag NPs or by detecting the amines by surface enhanced Raman spectroscopy (SERS) after adsorption, from the gas phase, on the metal NPs. Two different approaches have been adopted. In the first one an ethanol/water solution containing AgNO3 was used directly in the electrospinning apparatus. In this way, a simple heat treatment of the nanofibers mat was sufficient to obtain the formation of Ag NPs inside the nanofibers and a partial cross-link of PVA. In the second procedure, the Ag NPs were deposited on PVA nanofibers by using the supersonic cluster beam deposition method, so that a beam of pure Ag NPs of controlled size was obtained. Exposure of the PVA mat to the beam produced a uniform distribution of the NPs on the nanofibers surface. Ethylendiamine vapors and volatile amines released from fresh shrimp meat were chemisorbed on the nanofibers mats. A SERS spectrum characterized by a diagnostic Ag-N stretching vibration at 230 cm(-1) was obtained. The results allow to compare the two different approaches in the detection of ammines.

Fabrication of Polycaprolactone-Based Polyurethanes with Enhanced Thermal Stability.

The benefit of being acquainted with thermal properties, especially the thermal stability of polyurethanes (PU), and simplified methods for their improvement is manifold. Considering this, the effect of embedding different amounts of unmodified and surface-modified TiO2 nanoparticles (NPs) within PU, based on polycaprolactone (PCL) and Boltorn® aliphatic hyperbranched polyester, on PU properties was investigated. Results obtained via scanning electron microscopy, swelling measurements, mechanical tests and thermogravimetric analysis revealed that TiO2 NPs can be primarily applied to improve the thermal performance of PU. Through surface modification of TiO2 NPs with an amphiphilic gallic acid ester containing a C12 long alkyl chain (lauryl gallate), the impact on thermal stability of PU was greater due to the better dispersion of modified TiO2 NPs in the PU matrix compared to the unmodified ones. Also, the distinct shape of DTG peaks of the composite prepared using modified TiO2 NPs indicates that applied nano-filler is mostly embedded in soft segments of PU, leading to the delay in thermal degradation of PCL, simultaneously improving the overall thermal stability of PU. In order to further explore the thermal degradation process of the prepared composites and prove the dominant role of incorporated TiO2 NPs in the course of thermal stability of PU, various iso-conversional model-free methods were applied. The evaluated apparent activation energy of the thermal degradation reaction at different conversions clearly confirmed the positive impact of TiO2 NPs on the thermal stability and aging resistance of PU.

Structure-property relationships in heterophasic thermoplastic elastomers filled with montmorillonite.

Polypropylene (PP)/ethylene-propylene rubber (EPR)/Montmorillonite ternary nanocomposites with a phase separated morphology were studied in this work. Wide angle X-ray diffraction (WAXD), small angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to investigate the samples. One of the aim of this work was to separate the effects of rubber and clay content on the structure, morphology and mechanical properties of the samples. The presence of clay favored the formation of gamma phase and disrupted the lamellar framework. Clay had moreover a major role in shaping the phase separated morphology of the samples. Atomic Force Microscopy showed that the shear exerted by the clay layers was key for inducing a shish kebab morphology in the polymer matrix. Rubber content decreased the degree of crystallinity at a crystalline cell level and induced the formation of a double population of lamellar stacks. The mechanical properties of the samples primarily depended on rubber content, and they were secondarily tuned by the effect of clay. This synergistic effect allowed to obtain composites with increased stiffness, ductility and toughness, oppositely to what is frequently found.

Crystallization of a (1-butene)-ethylene copolymer in phase I directly from the melt in nanocomposites with montmorillonite.

Nanocomposites based on a copolymer of 1-butene and ethylene filled with montmorillonite (Cloisite 15A) were studied, obtaining for the first time crystallization from the melt directly into phase I. The polymorphism of the polymer and the dispersion of the filler in the matrix were investigated. The effect of the compatibilizer (PB-g-MA) on these properties was also singled out. The dramatic increase in the rate of the II --> I phase transition due to montmorillonite was attributed to the alteration in the phase stability diagram of the matrix, due to the introduction of defects and to induction of local pressure on the crystalline domains.

Postsynthetic Metalated MOFs as Atomically Dispersed Catalysts for Hydroformylation Reactions.

A manganese-based metal-organic framework with dipyrazole ligands has been metalated with atomically dispersed Rh and Co species and used as a catalyst for the hydroformylation of styrene. The Rh-based materials exhibited excellent conversion at 80 °C with complete chemoselectivity, high selectivity for the branched aldehyde, high recyclability, and negligible metal leaching.

Hybrid Transition Metal Dichalcogenide/Graphene Microspheres for Hydrogen Evolution Reaction.

A peculiar 3D graphene-based architecture, i.e., partial reduced-Graphene Oxide Aerogel Microspheres (prGOAM), having a dandelion-like morphology with divergent microchannels to implement innovative electrocatalysts for the hydrogen evolution reaction (HER) is investigated in this paper. prGOAM was used as a scaffold to incorporate exfoliated transition metals dichalcogenide (TMDC) nanosheets, and the final hybrid materials have been tested for HER and photo-enhanced HER. The aim was to create a hybrid material where electronic contacts among the two pristine materials are established in a 3D architecture, which might increase the final HER activity while maintaining accessible the TMDC catalytic sites. The adopted bottom-up approach, based on combining electrospraying with freeze-casting techniques, successfully provides a route to prepare TMDC/prGOAM hybrid systems where the dandelion-like morphology is retained. Interestingly, the microspherical morphology is also maintained in the tested electrode and after the electrocatalytic experiments, as demonstrated by scanning electron microscopy images. Comparing the HER activity of the TMDC/prGOAM hybrid systems with that of TMDC/partially reduced-Graphene Oxide (prGO) and TMDC/Vulcan was evidenced in the role of the divergent microchannels present in the 3D architecture. HER photoelectron catalytic (PEC) tests have been carried out and demonstrated an interesting increase in HER performance.

Copper Vanadate Nanobelts as Anodes for Photoelectrochemical Water Splitting: Influence of CoOx Overlayers on Functional Performances.

The design and development of environmentally friendly and robust anodes for photoelectrochemical (PEC) water splitting plays a critical role for the efficient conversion of radiant energy into hydrogen fuel. In this regard, quasi-1D copper vanadates (CuV2O6) were grown on conductive substrates by a hydrothermal procedure and processed for use as anodes in PEC cells, with particular attention on the role exerted by cobalt oxide (CoOx) overlayers deposited by radio frequency (RF) sputtering. The target materials were characterized in detail by a multitechnique approach with the aim at elucidating the interplay between their structure, composition, morphology, and the resulting activity as photoanodes. Functional tests were performed by standard electrochemical techniques like linear sweep voltammetry, impedance spectroscopy, and by the less conventional intensity modulated photocurrent spectroscopy, yielding an important insight into the material PEC properties. The obtained results highlight that, despite the fact that the supposedly favorable band alignment between CuV2O6 and Co3O4 did not yield a net current density increase, cobalt oxide-functionalized anodes afforded a remarkable durability enhancement, an important prerequisite for their eventual real-world applications. The concurrent phenomena accounting for the observed behavior are presented and discussed in relation to material physico-chemical properties.

Perkalite as an innovative filler for isotactic polypropylene-based nanocomposites.

Perkalite, an organically modified synthetic layered double hydroxide, was used as a filler in the preparation of nanocomposites based on isotactic polypropylene. The polymorphism of the polymer matrix was investigated, finding that Perkalite favors beta phase in certain conditions and is not a nucleant for the gamma polymorph. Perkalite promoted the formation of a dual population of lamellae, as evidenced by SAXS data. The dispersion of the filler was studied by WAXD, SAXS, and TEM. Perkalite was intercalated by the polymer and formed small, rather disordered tactoids, that determined an increase in physical mechanical properties, such as modulus, impact strength, thermal stability and heat deflection temperature. The Tm(0) of the materials was calculated by the method proposed by Marand, the kinetics of crystallization was evaluated by the Avrami analysis and also the Hoffman-Lauritzen theory of crystallization regimes was applied. Perkalite was found to depress Tm(0), to greatly enhance the rate of crystallization and to ease the chain folding of macromolecules.

Poly (1-butene-ran-ethylene) Monomodal Copolymers from Metallocene Catalysts: Structural and Morphological Differences with Increasing Ethylene Content.

Samples of random poly(butene-ran-ethylene) copolymers produced with metallocene catalysts were studied in order to elucidate the different behaviors of this particular class of materials as a function of increasing ethylene (C2) content. The samples cooled down from the melt are semi-crystalline or amorphous and crystallize in different crystal modifications, depending on the amount of C2. Thermal analysis, X-ray diffraction, and microscopic techniques were used to follow the changes of the materials with aging time and to understand the structural and morphological behavior with the aim of highlighting possible peculiar properties, which may be of great interest in the application of such materials in the field of Hot Melt adhesives.

Structure-property relationship in polyethylene reinforced by polyethylene-grafted multi-walled carbon nanotubes.

Polyethylene-grafted multiwalled carbon nanotubes (PE-g-MWNT) were used to reinforce polyethylene (PE). The nanocomposites possessed not only improved stiffness and strength, but also increased ductility and toughness. The effects on the structure and morphology of composites due to pristine multiwalled carbon nanotubes (MWNT) and PE-g-MWNT were studied and compared using small angle X-ray scattering (SAXS), wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). The SAXS long period, crystalline layer thickness and crystallinity of polymer lamellar stacks were found to decrease significantly in MWNT composites, while the decreases were much smaller in PE-g-MWNT composites. PE-g-MWNT allowed a more efficient and unhindered crystallization at a lamellar level, while MWNT disrupted the order of lamellar stacks, probably because of their tendency to aggregate. The SAXS crystallinity and the mechanical properties of the composites showed similar trends as a function of MWNT content. This suggested that the improvement of the interfacial strength between polymer and carbon nanotubes was a result of synergistic effects of better dispersion of the filler, better stress transfer, due to the grafting of polymer and MWNT, and the nucleation of a crystalline phase around MWNT. The latter effect was confirmed by measurements of kinetics of non-isothermal crystallization.

Structure-property relationships in isotactic poly(propylene)/ethylene propylene rubber/montmorillonite nanocomposites.

Nanocomposites based on isotactic polypropylene/ethylene propylene rubber (iPP/EPR) were prepared adding different amounts of montmorillonite and maleated polypropylene. The structure and morphology of the samples were characterized by small angle X-ray scattering, wide angle X-ray diffraction, electronic and optical microscopy and differential scanning calorimetry, iPP showed a polymorphic behavior. Clay disrupted the ordered crystallization of iPP and had a key role in shaping the distribution of iPP and EPR phases: larger filler contents brought about smaller, less coalesced and more homogeneous rubber domains. Clay distributed itself only in the continuous phase and not in the rubber domains. Tactoids persisted on the surface of the sample, while delamination proceeded to a greater degree in the bulk of the materials. Melt flow rate, impact strength, flexural and tensile properties, were also measured and a structure-property correlation was sought. Clay produced its most significant effect on physical-mechanical properties by controlling the size of rubber domains in the heterophasic matrix. This allowed to obtain nanocomposites with increased stiffness and impact strength, a remarkable achievement for polymer layered-silica nanocomposites that usually suffer the drawback of being stiffer than the unfilled matrix, but at the same time with a lower resistance to impact. A beneficial effect of clay on thermal stability was also observed.

Visible Light Driven Photoanodes for Water Oxidation Based on Novel r-GO/ß-Cu2V2O7/TiO2 Nanorods Composites.

This paper describes the preparation and the photoelectrochemical performances of visible light driven photoanodes based on novel r-GO/ß-Cu2V2O7/TiO2 nanorods/composites. ß-Cu2V2O7 was deposited on both fluorine doped tin oxide (FTO) and TiO2 nanorods (NRs)/FTO by a fast and convenient Aerosol Assisted Spray Pyrolysis (AASP) procedure. Ethylenediamine (EN), ammonia and citric acid (CA) were tested as ligands for Cu2+ ions in the aerosol precursors solution. The best-performing deposits, in terms of photocurrent density, were obtained when NH3 was used as ligand. When ß-Cu2V2O7 was deposited on the TiO2 NRs a good improvement in the durability of the photoanode was obtained, compared with pure ß-Cu2V2O7 on FTO. A further remarkable improvement in durability and photocurrent density was obtained upon addition, by electrophoretic deposition, of reduced graphene oxide (r-GO) flakes on the ß-Cu2V2O7/TiO2 composite material. The samples were characterized by X-ray Photoelectron Spectroscopy (XPS), Raman, High Resolution Transmission Electron Microscopy (HR-TEM), Scanning Electron Microscopy (SEM), Wide Angle X-ray Diffraction (WAXD) and UV-Vis spectroscopies. The photoelectrochemical (PEC) performances of ß-Cu2V2O7 on FTO, ß-Cu2V2O7/TiO2 and r-GO/ß-Cu2V2O7/TiO2 were tested in visible light by linear voltammetry and Electrochemical Impedance Spectroscopy (EIS) measurements.

Ag-Vanadates/GO Nanocomposites by Aerosol-Assisted Spray Pyrolysis: Preparation and Structural and Electrochemical Characterization of a Versatile Material.

In this article, we describe the deposition by aerosol-assisted spray pyrolysis of different types of silver vanadate nanocomposites with and without graphene oxide (GO) on different substrates (carbon paper (CP) and fluorine-doped tin oxide (FTO)). When deposited on CP, different amounts of GO were added to the Ag and V precursor solution to study the effect of GO on the physicochemical properties of the resulting Ag-vanadate. It is shown that the addition of GO leads mainly to the formation of nanoparticles of the Ag2V4O11 phase, whereas Ag2V4O11 and Ag3VO4 are obtained without the addition of GO. The morphology and chemical properties of the composites were determined by scanning and transmission electron microscopies, X-ray diffraction, X-ray photoemission spectroscopy, and UV-visible and Raman spectroscopies. In addition, the photoelectrochemical (PEC) properties of such composites were studied by CV, linear sweep voltammetry, and electrochemical impedance spectroscopy. The ideal Ag x VO y and GO ratio was optimized for obtaining higher photocurrent values and a good stability. The results showed that the presence of GO improves the electrical conductivity of the catalyst layer as well as the electron injection from the oxide to the electrode surface. The deposition of pure Ag2V4O11 on FTO does not lead to samples with stable PEC performances. Samples grown on CP supports showed an efficient electrochemical detection of small amounts of ethylenediamine in water solution.

A quantitative differentiation method for plastic bags by infrared spectroscopy, thickness measurement and differential scanning calorimetry for tracing the source of illegal drugs.

Fifty shopping bags, commonly encountered in the packaging of drug doses, were characterized by thickness measurements, infrared spectroscopy and differential scanning calorimetry. By these very straightforward and inexpensive techniques, without sample preparation, nearly all the considered samples could be discriminated. Ninety-seven percent of the possible pairs of white, apparently similar dull polymer films were differentiated. The rather large degree of variability existing in grocery bags, even though they are mass produced, was shown, confirming that these items can be useful in tracing the source of illicit drug doses.

Neuronal commitment of human circulating multipotent cells by carbon nanotube-polymer scaffolds and biomimetic peptides.

AIM: We aimed to set up a self-standing, biomimetic scaffold system able to induce and support per se neuronal differentiation of autologous multipotent cells. MATERIALS & METHODS: We isolated a population of human circulating multipotent cells (hCMCs), and used carbon nanotube/polymer nanocomposite scaffolds to mimic electrical/nanotopographical features of the neural environment, and biomimetic peptides reproducing axon guidance cues from neural proteins. RESULTS: hCMCs showed high degree of stemness and multidifferentiative potential; stimuli from the scaffolds and biomimetic peptides could induce and boost hCMC differentiation toward neuronal lineage despite the absence of exogenously added, specific growth factors. CONCLUSION: This work suggests the scaffold-peptides system combined with autologous hCMCs as a functional biomimetic, self-standing prototype for neural regenerative medicine applications.

Cuts and tears on a paper towel: a case report on an unusual examination of damage.

The examination of damage to a paper towel, an item of evidence in a murder case, is described. Simulations performed with selected tools and the observation of the lacerations present on the towel permitted to infer that they were originated by cleaning of a pointed and sharp implement. Some marks, considered characteristic of scissors, were detected on the exhibit. This experimental outcome resulted critical in challenging the declarations of the suspect. A rather significant analogy between damage examination on paper towels and on textiles was established.

A quantitative differentiation method for acrylic fibers by infrared spectroscopy.

Absorbance peak areas of nitrile (2240 cm(-1)), carbonyl (1730 cm(-1)) and CH (1370 cm(-1)) groups were obtained for 48 colorless acrylic fibers by infrared (IR) microspectroscopy. The carbonyl signal, related to the comonomers most commonly used in acrylic fibers, was ratioed against the nitrile and CH bands, pertaining to the backbone of the polymer chains. The ratios A1730/A2240 and A1730/A1370, a relative measure of the comonomer content in the fiber, were used to differentiate the samples. A decrease in the crystallinity of fibers has been noted with increasing comonomer content. Relative standard deviation (R.S.D.) of the ratios were 1 and 3% for repetitive analyses on the same location and along the length of the same single fiber, respectively. When different fibers of the same sample were examined, results were reproducible within 6%. This simple method can greatly enhance the evidential value of colorless acrylic fibers, being able to discriminate them and thus helping the Court to better assess their significance.

Employing glass refractive index measurement (GRIM) in fiber analysis: a simple method for evaluating the crystallinity of acrylics.

The refractive index (RI) of 40 colorless acrylic fiber samples was determined by the immersion oil and Mettler hot stage method, implemented in the glass refractive index measurement (GRIM) instrument by Foster and Freeman. Low standard deviations for nearly all the samples were obtained and differentiation of fibers even with the same trade name was possible just on the basis of RI. Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) were employed to establish a linear correlation between RI and the degree of crystallinity. Insights on the structural order of this group of fibers is then obtainable by a quick and easy technique, adding value to casework comparisons.