From 3D printing to 3D bioprinting: the material properties of polymeric material and its derived bioink for achieving tissue specific architectures.

The application of 3D printing technologies fields for biological tissues, organs, and cells in the context of medical and biotechnology applications requires a significant amount of innovation in a narrow printability range. 3D bioprinting is one such way of addressing critical design challenges in tissue engineering. In a more general sense, 3D printing has become essential in customized implant designing, faithful reproduction of microenvironmental niches, sustainable development of implants, in the capacity to address issues of effective cellular integration, and long-term stability of the cellular constructs in tissue engineering. This review covers various aspects of 3D bioprinting, describes the current state-of-the-art solutions for all aforementioned critical issues, and includes various illustrative representations of technologies supporting the development of phases of 3D bioprinting. It also demonstrates several bio-inks and their properties crucial for being used for 3D printing applications. The review focus on bringing together different examples and current trends in tissue engineering applications, including bone, cartilage, muscles, neuron, skin, esophagus, trachea, tympanic membrane, cornea, blood vessel, immune system, and tumor models utilizing 3D printing technology and to provide an outlook of the future potentials and barriers.

Integrated graphene quantum dot decorated functionalized nanosheet biosensor for mycotoxin detection.

Decoration of graphene quantum dots (GQDs) on molybdenum disulfide (MoS2) nanosheets serves as an active electrode material which enhances the electrochemical performance of the analyte detection system. Herein, ionic surfactant cetyltrimethylammonium bromide (CTAB)-exfoliated MoS2 nanosheets decorated with GQD material are used to construct an electrochemical biosensor for aflatoxin B1 (AFB1) detection. An antibody of AFB1 (aAFB1) was immobilized on the electrophoretically deposited MoS2@GQDs film on the indium tin oxide (ITO)-coated glass surface using a crosslinker for the fabrication of the biosensor. The immunosensing study investigated by the electrochemical method revealed a signal response in the range of 0.1 to 3.0 ng/mL AFB1 concentration with a detection limit of 0.09 ng/mL. Also, electrochemical parameters such as diffusion coefficient and heterogeneous electron transfer (HET) were calculated and found to be 1.67 × 10-5 cm2/s and 2 × 10-5 cm/s, respectively. The effective conjugation of MoS2@GQDs that provides abundant exposed edge sites, large surface area, improved electrical conductivity, and electrocatalytic activity has led to an excellent biosensing performance with enhanced electrochemical parameters. Validation of the fabricated immunosensor was performed in a spiked maize sample, and a good percentage of recoveries within an acceptable range were obtained (80.2 to 98.3%).Graphical abstract.

Adding Biomolecular Recognition Capability to 3D Printed Objects.

Three-dimensional (3D) printing technologies will impact the biosensor community in the near future, at both the sensor prototyping level and the sensing layer organization level. The present study aimed at demonstrating the capacity of one 3D printing technique, digital light processing (DLP), to produce hydrogel sensing layers with 3D shapes that are unattainable using conventional molding procedures. The first model of the sensing layer was composed of a sequential enzymatic reaction (glucose oxidase and peroxidase), which generated a chemiluminescent signal in the presence of glucose and luminol. Highly complex objects with assembly properties (fanciful ball, puzzle pieces, 3D pixels, propellers, fluidic and multicompartments) with mono-, di-, and tricomponents configurations were achieved, and the activity of the entrapped enzymes was demonstrated. The second model was a sandwich immunoassay protocol for the detection of brain natriuretic peptide. Here, highly complex propeller shape sensing layers were produced, and the recognition capability of the antibodies was elucidated. The present study opens then the path to a totally new field of development of multiplex sensing layers, printed separately and assembled on demand to create complex sensing systems.

Space radiation damage rescued by inhibition of key spaceflight associated miRNAs.

Our previous research revealed a key microRNA signature that is associated with spaceflight that can be used as a biomarker and to develop countermeasure treatments to mitigate the damage caused by space radiation. Here, we expand on this work to determine the biological factors rescued by the countermeasure treatment. We performed RNA-sequencing and transcriptomic analysis on 3D microvessel cell cultures exposed to simulated deep space radiation (0.5 Gy of Galactic Cosmic Radiation) with and without the antagonists to three microRNAs: miR-16-5p, miR-125b-5p, and let-7a-5p (i.e., antagomirs). Significant reduction of inflammation and DNA double strand breaks (DSBs) activity and rescue of mitochondria functions are observed after antagomir treatment. Using data from astronaut participants in the NASA Twin Study, Inspiration4, and JAXA missions, we reveal the genes and pathways implicated in the action of these antagomirs are altered in humans. Our findings indicate a countermeasure strategy that can potentially be utilized by astronauts in spaceflight missions to mitigate space radiation damage.

Carbon microarrays for the direct impedimetric detection of Bacillus anthracis using Gamma phages as probes.

A direct and efficient impedimetric method is presented for the detection of Bacillus anthracis Sterne vegetative cells, using Gamma phages as probes attached to screen-printed carbon electrode microarrays. The carbon electrodes were initially functionalized through cyclic-voltammetric reduction of a nitro-aryl diazonium moiety, followed by further reduction of nitro groups to amino groups, and finally by treatment with glutaraldehyde. Functionalization (probe immobilization) using Gamma phages was verified by XPS and TOF-SIM experiments. The Gamma phage-modified microarrays were then used to detect B. anthracis Sterne bacteria in aqueous electrolyte media. Faradaic impedimetric detection of bacteria in KCl solution containing the ferri/ferro cyanide redox couple shows a gradual increase in Z' (real impedance) values, taken from the extrapolation of the linear portion of Nyquist plots in the low frequency range, for sensors placed in contact with increasing concentrations of B. anthracis. ΔZ' values vary from 700 to 5300 Ohms for bacteria concentrations ranging from 10(2) to 10(8) cfu mL(-1). These shifts in Z' are attributed to a decrease in diffusion controlled charge transfer to the electrode surface following capture of intact B. anthracis. No significant ΔZ' was observed for control experiments using E. coli. K12 as a non-specific target, even at a concentration of 10(8) cfu mL(-1).

High-throughput multiplexed competitive immunoassay for pollutants sensing in water.

The present study described the development and evaluation of a new fully automated multiplex competitive immunoassay enabling the simultaneous detection of five water pollutants (okadaic acid (OA), 2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine (atrazine), 2.4-dichlorophenoxyacetic acid (2,4-D), 2,4,6-trinitrotoluene (TNT), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)). The technology is taking advantage of an optical-clear pressure-sensitive adhesive on which biomolecules can be immobilized and that can be integrated within a classical 96-well format. The optimization of the microarray composition and cross-reaction was performed using an original approach where probe molecules (haptens) were conjugated to different carriers such as protein (bovine serum albumin or ovalbumin), amino-functionalized latex beads, or dextran polymer and arrayed at the surface of the adhesive. A total of 17 different probes were then arrayed together with controls on the adhesive surface and screened toward their specific reactivity and cross-reactivity. Once optimized, the complete setup was used for the detection of the five target molecules (less than 3 h for 96 samples). Limits of detection of 0.02, 0.01, 0.01, 100, and 0.02 µg L(-1) were found for OA, atrazine, 2,4-D, TNT, and RDX, respectively. The proof of concept of the multiplex competitive detection (semiquantitative or qualitative) of the five pollutants was also demonstrated on 16 spiked samples.

A Preliminary Study for an Intraoperative 3D Bioprinting Treatment of Severe Burn Injuries.

Intraoperative three-dimensional fabrication of living tissues could be the next biomedical revolution in patient treatment. APPROACH: We developed a surgery-ready robotic three-dimensional bioprinter and demonstrated that a bioprinting procedure using medical grade hydrogel could be performed using a 6-axis robotic arm in vivo for treating burn injuries. RESULTS: We conducted a pilot swine animal study on a deep third-degree severe burn model. We observed that the use of cell-laden bioink as treatment substantially affects skin regeneration, producing in situ fibroblast growth factor and vascular endothelial growth factor, necessary for tissue regeneration and re-epidermalization of the wound. CONCLUSIONS: We described an animal study of intraoperative three-dimensional bioprinting living tissue. This emerging technology brings the first proof of in vivo skin printing feasibility using a surgery-ready robotic arm-based bioprinter. Our positive outcome in skin regeneration, joined with this procedure's feasibility, allow us to envision the possibility of using this innovative approach in a human clinical trial in the near future.

Enhanced colorimetric detection on porous microarrays using in situ substrate production.

A new technique is reported for the enhanced colorimetric detection of multiplexed hybridization onto porous membrane-based microarrays. This approach combines the use of horseradish peroxidase (HRP) as a label together with a chromogen substrate and a local production of the hydrogen peroxide required for substrate oxidation. This in situ production of coreagent is obtained using glucose oxidase (GOx) directly immobilized within the microarray porous membrane mesh. The oxidation of glucose by the immobilized GOx produces hydrogen peroxide which itself enables the oxidation of TMB (3,3',5,5'-tetramethylbenzidine) by HRP and yields a blue precipitate on positive spots. Thanks to a coreagent overconcentration within the membrane, this design drastically surpasses the performances of the standard TMB/H(2)O(2) kit used for peroxidase label detection. The obtained target limit of detection is then 50 times lower (20 pM) than the one obtained with the standard kit approach, and the dynamic range expands at least one decade. Furthermore, the developed method was shown to compete well with the widely used alkaline phosphatase-BCIP (5-bromo-4-chloro-3-indolyl phosphate)/NBT (nitro blue tetrazolium chloride) readout while minimizing background signal. The method was finally successfully applied to the multiplex detection of single nucleotide polymorphisms (SNPs) in complex PCR samples. The background lowering was impacted here positively on the SNPs' detection by increasing the complementary/noncomplementary signal ratio.

Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel.

Since the emergence of regenerative medicine and tissue engineering more than half a century ago, one obstacle has persisted: the in vitro creation of large-scale vascular tissue (>1 cm3) to meet the clinical needs of viable tissue grafts but also for biological research applications. Considerable advancements in biofabrication have been made since Weinberg and Bell, in 1986, created the first blood vessel from collagen, endothelial cells, smooth muscle cells and fibroblasts. The synergistic combination of advances in fabrication methods, availability of cell source, biomaterials formulation and vascular tissue development, promises new strategies for the creation of autologous blood vessels, recapitulating biological functions, structural functions, but also the mechanical functions of a native blood vessel. In this review, the main technological advancements in bio-fabrication are discussed with a particular highlights on 3D bioprinting technologies. The choice of the main biomaterials and cell sources, the use of dynamic maturation systems such as bioreactors and the associated clinical trials will be detailed. The remaining challenges in this complex engineering field will finally be discussed.

Gold nanobipyramids integrated ultrasensitive optical and electrochemical biosensor for Aflatoxin B1 detection.

This work reports the development of an electrical and optical biosensing for label-free detection of Aflatoxin B1 (AFB1) using gold (Au) nanobipyramids (NBPs). AuNBPs were synthesized through a two-step seed-mediated growth process followed by an exchange of capping agent from surfactant to lipoic acid. Pure and monodispersed AuNBPs of 70 nm base length were obtained and deposited on indium tin oxide (ITO)-coated glass substrate modified with self-assembled (3-Aminopropyl) triethoxysilane (APTES) film. The characterization of the obtained surfaces using spectroscopy, microscopy and diffractometry confirms the formation of AuNBPs, the conjugation to ITO electrode substrate and the immobilization of anti-AFB1 antibodies. AuNBPs modified ITO substrates were used for both electrochemical and Surface Plasmon Resonance biosensing studies. Localized Surface Plasmon Resonance (LSPR) local field enhancement was demonstrated. SPR based AFB1 detection was found to be linear in the 0.1-500 nM range with a limit of detection of 0.4 nM, whereas, impedimetric AFB1 detection was shown to be linear in the 0.1-25 nM range with a limit of detection of 0.1 nM. The practical utility of the impedimetric sensor was tested in spiked maize samples and 95-100% recovery percentage was found together with low relative standard deviation, proof of the robustness of this AFB1 sensor.

Robust, high-throughput solution for blood group genotyping.

With the concomitant increase of blood transfusions and safety rules, there is a growing need to integrate high-throughput and multiparametric assays within blood qualification centers. Using a robust and automated solution, we describe a new method for extended blood group genotyping (HiFi-Blood 96) bringing together the throughput possibilities of complete automation and the microarray multiplexed analysis potential. Our approach provides a useful resource for upgrading blood qualification center facilities. A set of six single-nucleotide polymorphisms (SNPs) associated with clinically important blood group antigens (Kell, Kidd, Duffy, and MNS systems) were selected and the corresponding genotyping assays developed. A panel of 293 blood samples was used to validate the approach. The resulting genotypes were compared to phenotypes previously determined by standard serologic techniques, and excellent correlations were found for five SNPs out of six. For the Kell, Kidd, Duffy, and MNS3/MNS4 systems, high matching percentages of 100%, 98.9%, 97.7%, and 97.4% were obtained, respectively, whereas a concordance percentage of 83.3% only was attained for the MNS1/MNS2 polymorphism.

1-Ethyl-3-methylimidazolium ethylsulfate/copper catalyst for the enhancement of glucose chemiluminescent detection: effects on light emission and enzyme activity.

The effect of the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO(4)]) on the copper-catalyzed luminol chemiluminescence (CL) is reported. A drastic light emission enhancement is observed, related to a strong interaction between Cu(2+) and the imidazolium ring. In these conditions, the CL reaction was able to produce light efficiently at pH as low as 6.5 (amplification factor: Intensity(+IL)/Intensity(-IL) = 2900). Interesting effects of [Emim][EtSO(4)] on the enzyme glucose oxidase activity were also evidenced, and advantages were taken from this enhancement to perform sensitive chemiluminescent glucose detection (LOD = 4 microM) at pH 8.0.

Chelating Langmuir-Blodgett film: a new versatile chemiluminescent sensing layer for biosensor applications.

The present study reports the achievement of a new chemiluminescent sensing layer able to simultaneously (i) play an active role on ligand immobilization and (ii) serve as a catalyst in detection processes for label-free biosensor applications. This new type of active Langmuir-Blodgett (LB) monolayer has been designed by using a chelating lipid (Ni-NTA-DOGS). Thanks to the chelated metallic cation, this peculiar lipid exhibits luminol chemiluminescence catalysis properties in the presence of hydrogen peroxide. Upon biomolecule interaction through imidazole ring chelation (mediated by the metallic cation bound to the lipid headgroup), the chemiluminescent signal can be modulated. The first chemiluminescent signal acquisition experiments have shown a strong and homogeneous signal of the chelating layer. Upon histamine interactions, a histidine derivative used as a marker of fresh food quality, we succeeded in obtaining as a proof of concept a chemiluminescent signal variation without any derivatization of the target molecule. This signal variation was shown to be directly correlated to the histamine concentration with a limit of detection of 2 microg/mL.

Automated oligonucleotide solid-phase synthesis on nanosized silica particles using nano-on-micro assembled particle supports.

This article describes an original strategy to enable solid-phase oligodeoxyribonucleotide (ODN) synthesis on nanosized silica particles. It consists of the reversible immobilization of silica nanoparticles (NPs) on micrometric silica beads. The resulting assemblies, called nano-on-micro (NOM) systems, are well adapted to ODN synthesis in an automated instrument. First, NPs are derivatized with OH functions. For NOM assembly preparation, these functions react with the silanols of the microbeads under specific experimental conditions. Furthermore, OH groups allow ODN synthesis on the nanoparticles via phosphoramidite chemistry. The stability of the NOM assemblies during ODN solid-phase synthesis is confirmed by scanning and transmission electron microscopy (SEM and TEM, respectively), together with dynamic light scattering analyses. Then, the release of ODN-functionalized nanoparticles is performed under mild conditions (1% NH(4)OH in water, 1 h, 60 degrees C). Our technique provides silica nanoparticles well functionalized with oligonucleotides, as demonstrated by hybridization experiments conducted with the cDNA target.

A label-free ultrasensitive microfluidic surface Plasmon resonance biosensor for Aflatoxin B1 detection using nanoparticles integrated gold chip.

The Surface Plasmon resonance (SPR) based label-free detection of small targeted molecules is a great challenge and require substantial signal amplification for the accurate and precise quantification. The incorporation of noble metal nanoparticles (NPs) like gold (Au) NPs for the fabrication of SPR biosensor has shown remarkable impact both for anchoring the signal amplification and generate plasmonic resonant coupling between NPs and chip surface. In this work, we present comparative studies related to the fabrication of self-assembled monolayer (SAM) and the influence of AuNPs on Au chip for Aflatoxin B1 (AFB1) detection using SPRi apparatus. The SAM Au chip was sequentially modified by EDC-NHS crosslinkers, grafting of protein-A and finally interaction with anti-AFB1 antibodies. Similar multilayer chip surface was prepared using functionalized lipoic acid AuNPs deposited on SAM Au chips followed by in situ activation of functional groups using EDC-NHS crosslinkers, grafting of protein-A and immobilization of anti-AFB1 antibodies. This multilayer functionalized AuNPs modified Au chip was successfully utilized for AFB1 detection ranging from 0.01 to 50 nM with a limit of detection of 0.003 nM. When compared to bare self-assembled Au chip which was shown to exhibit a limit of detection of 0.19 nM and a linear detection ranging from 1 to 50 nM, the AuNPs modified Au chip was proven to clearly be a better analytical tool. Finally, validation of the proposed biosensor was evaluated by spiked wheat samples and average recoveries (93 and 90.1%) were found to be acceptable.

"Print-n-Shrink" technology for the rapid production of microfluidic chips and protein microarrays.

An innovative method for the production of microfluidic chips integrating protein spots is described. The technology, called "Print-n-Shrink", is based on the screen-printing of a microfluidic design (using a dielectric ink) onto Polyshrink polystyrene sheets. The initial print which has a minimum size of 15 microm (height) x 230 microm (width) is thermally treated (30 seconds, 163 degrees C) to shrink and generate features of 85 microm (height) x 100 microm (width). Concomitantly, proteins such as monoclonal antibodies or cellular adhesion proteins are spotted onto the Polyshrink sheets and shrunk together with the microfluidic design, creating a complete biochip integrating both complex microfluidic designs and protein spots for bioanalytical applications.

Aryl diazonium for biomolecules immobilization onto SPRi chips.

A method for the immobilization of proteins at the surface of surface plasmon resonance imaging (SPRi) chips is presented. The technology, based on the electro-deposition of a 4-carboxymethyl aryl diazonium (CMA) monolayer is compared to a classical thioctic acid self-assembled monolayer. SPRi live recording experiments followed by the quantification of the diazonium surface coverage demonstrate the presence of a monolayer of electro-deposited molecules (11*10(12) molecules mm(-2)). This monolayer, when activated through a classical carbodiimide route, generates a surface suitable for the protein immobilization. In the present study, protein A and BSA are immobilized as specific and control spots (150 microm id), respectively. The AFM characterization of the spots deposited onto CMA or thioctic acid modified chips prove the presence of 4.7 nm protein monolayers. Finally, the SPRi detection capabilities of the two surface chemistries are compared according to specific signal, non-specific interaction and regeneration possibilities. Advantages are given to the CMA surface modification since no measurable non-specific signal is obtained while reaching a higher specific signal.

SPRi-based hemagglutinin quantitative assay for influenza vaccine production monitoring.

Influenza vaccine manufacturers lack tools, whatever the involved production bioprocess (egg or cell-based), to precisely and accurately evaluate vaccine antigen content from samples. Indeed, the gold standard single-radial immunodiffusion (SRID) assay, which remains the only validated assay for the evaluation of influenza vaccine potency, is criticized by the scientific community and regulatory agencies since a decade for its high variability, lack of flexibility and low sensitivity. We hereby report an imaging surface plasmon resonance (SPRi) assay for the quantification of both inactivated vaccine influenza antigens and viral particles derived from egg- and cell-based production samples, respectively. The assay, based on fetuin-hemagglutinin interactions, presents higher reproducibility (<3%) and a greater analytical range (0.03-20 µg/mL) than SRID for bulk monovalent and trivalent vaccine and its limit of detection was evaluated to be 100 times lower than the SRID's one. Finally, viral particles production through cell culture-based bioprocess was also successfully monitored using our SPRi-based assay and a clear correlation was found between the biosensor response and total virus particle content.

Bacteriophage-modified microarrays for the direct impedimetric detection of bacteria.

A novel method is presented for the specific and direct detection of bacteria using bacteriophages as recognition receptors immobilized covalently onto functionalized screen-printed carbon electrode (SPE) microarrays. The SPE networks were functionalized through electrochemical oxidation in acidic media of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) by applying a potential of +2.2 V to the working electrode. Immobilization of T4 bacteriophage onto the SPEs was achieved via EDC by formation of amide bonds between the protein coating of the phage and the electrochemically generated carboxylic groups at the carbon surface. The surface functionalization with EDC, and the binding of phages, was verified by time-of-flight secondary ion mass spectrometry. The immobilized T4 phages were then used to specifically detect E. coli bacteria. The presence of surface-bound bacteria was verified by scanning electron and fluorescence microscopies. Impedance measurements (Nyquist plots) show shifts of the order of 10(4) Omega due to the binding of E. coli bacteria to the T4 phages. No significant change in impedance was observed for control experiments using immobilized T4 phage in the presence of Salmonella. Impedance variations as a function of incubation time show a maximum shift after 20 min, indicating onset of lysis, as also confirmed by fluorescence microscopy. Concentration-response curves yield a detection limit of 10(4) cfu/mL for 50-microL samples.

Biochips: non-conventional strategies for biosensing elements immobilization.

The present article draws a general picture of non-conventional methods for biomolecules immobilization. The technologies presented are based either on original solid supports or on innovative immobilization processes. Polydimethylsiloxane elastomer will be presented as a popular immobilization support within the biochip developer community. Electro-addressing of biomolecules at the surface of conducting biochips will appear to be an interesting alternative to immobilization processes based on surface functionalization. Finally, bead-assisted biomolecules immobilization will be presented as an open field of research for biochip developments.