Dual-wavelength distributed feedback laser array based on four-phase-shifted sampled Bragg grating for terahertz generation.

We propose and experimentally demonstrate a dual-wavelength distributed feedback (DFB) laser array utilizing a four-phase-shifted sampled Bragg grating. By using this grating, the coupling coefficient is enhanced by approximately 2.83 times compared to conventional sampled Bragg gratings. The devices exhibit a stable dual-mode lasing achieved by introducing further π-phase shifts at 1/3 and 2/3 positions along the cavity. These devices require only one stage of lithography to define both the ridge waveguide and the gratings, mitigating issues related to misalignment between them. A dual-wavelength laser array has been fabricated with frequency spacings of 320 GHz, 500 GHz, 640 GHz, 800 GHz, and 1 THz. When integrated with semiconductor optical amplifiers, the output power of the device can reach 23.6 mW. Furthermore, the dual-wavelength lasing is maintained across a wide range of injection currents, with a power difference of <3 dB between the two primary modes. A terahertz (THz) signal has been generated through photomixing in a photoconductive antenna, with the measured power reaching 12.8 µW.

False memory-guided eye movements: insights from a DRM-Saccade paradigm.

The Deese-Roediger and McDermott (DRM) paradigm and visually guided saccade tasks are both prominent research tools in their own right. This study introduces a novel DRM-Saccade paradigm, merging both methodologies. We used rule-based saccadic eye movements whereby participants were presented with items at test and were asked to make a saccade to the left or right of the item to denote a recognition or non-recognition decision. We measured old/new recognition decisions and saccadic latencies. Experiment 1 used a pro/anti saccade task to a single target. We found slower saccadic latencies for correct rejection of critical lures, but no latency difference between correct recognition of studied items and false recognition of critical lures. Experiment 2 used a two-target saccade task and also measured corrective saccades. Findings corroborated those from Experiment 1. Participants adjusted their initial decisions to increase accurate recognition of studied items and rejection of unrelated lures but there were no such corrections for critical lures. We argue that rapid saccades indicate cognitive processing driven by familiarity thresholds. These occur before slower source-monitoring is able to process any conflict. The DRM-Saccade task could effectively track real-time cognitive resource use during recognition decisions.

Double slot micro ring resonators with inner wall angular gratings as ultra-sensitive biochemical sensors.

We simulate and demonstrate experimentally an inner-wall grating double slot micro ring resonator (IG-DSMRR) with a center slot ring radius of only 6.72 µm based on the silicon-on-insulator platform. This novel photonic-integrated sensor for optical label-free biochemical analysis boosts the measured refractive index (RI) sensitivity in glucose solutions to 563 nm/RIU with the limit of detection value being 3.7 × 10-6 RIU (refractive index units). The concentration sensitivity for sodium chloride solutions can reach 981 pm/%, with a minimum concentration detection limit of 0.02%. Using the combination of DSMRR and IG, the detection range is enlarged significantly to 72.62 nm, three times the free spectral range of conventional slot micro ring resonators. The measured Q-factor is 1.6 × 104, and the straight strip and double slot waveguide transmission losses are 0.9 dB/cm and 20.2 dB/cm, respectively. This IG-DSMRR combines the advantages of a micro ring resonator, slot waveguide, and angular grating and is highly desirable for biochemical sensing in liquids and gases offering an ultra-high sensitivity and ultra-large measurement range. This is the first report of a fabricated and measured double-slot micro ring resonator with an inner sidewall grating structure.

Sidewall grating slot waveguide microring resonator biochemical sensor.

Integrated microring resonator structures based on silicon-on-insulator (SOI) platforms are promising candidates for high-performance on-chip sensing. In this work, a novel sidewall grating slot microring resonator (SG-SMRR) with a compact size (5 µm center radius) based on the SOI platform is proposed and demonstrated experimentally. The experiment results show that the refractive index (RI) sensitivity and the limit of detection value are 620 nm/RIU and 1.4 × 10-4 RIU, respectively. The concentration sensitivity and minimum concentration detection limit are 1120 pm/% and 0.05%, respectively. Moreover, the sidewall grating structure makes this sensor free of free spectral range (FSR) limitation. The detection range is significantly enlarged to 84.5 nm in lab measurement, four times that of the FSR of conventional SMRRs. The measured Q-factor is 3.1 × 103, and the straight slot waveguide transmission loss is 24.2 dB/cm under sensing conditions. These results combined with the small form factor associated with a silicon photonics sensor open up applications where high sensitivity and large measurement range are essential.

Stepped-height ridge waveguide MQW polarization mode converter monolithically integrated with sidewall grating DFB laser.

We report, to the best of our knowledge, the first demonstration of a 1555-nm stepped-height ridge waveguide polarization mode converter monolithically integrated with a sidewall grating distributed-feedback (DFB) laser using the identical epitaxial layer scheme. The device shows stable single longitudinal mode (SLM) operation with the output light converted from TE to TM polarization with an efficiency of >94% over a wide range of DFB injection currents (IDFB) from 140 mA to 190 mA. The highest TM mode purity of 98.2% was obtained at IDFB = 180 mA. A particular advantage of this device is that only a single step of metalorganic vapor-phase epitaxy and two steps of III-V material dry etching are required for the whole integrated device fabrication, significantly reducing complexity and cost.

Millimeter-wave generation based on a monolithic dual-wavelength DFB laser with four phase-shifted sampled gratings and equivalent chirp technology.

A dual-wavelength DFB laser array based on four phase-shifted grating and equivalent chirp technology is first proposed, fabricated, and experimentally demonstrated. The dual-wavelength emitting is achieved by symmetrically introducing two π phase shifts into a chirped four phase-shifted sampled grating cavity. Meanwhile, the beating signal of the dual-wavelength output is stabilized by applying an electro-absorption modulator integrated at the rear of the cavity. Under different grating chirp rates, a series of RF signals from 66.8 GHz to 73.6 GHz with a linewidth of less than 210 kHz is obtained.

DFB laser array based on four phase-shifted sampled Bragg gratings with precise wavelength control.

A four-laser array based on sampled Bragg grating distributed feedback (DFB) lasers in which each sampled period contains four phase-shift sections is proposed, fabricated, and experimentally demonstrated. The wavelength spacing between adjacent lasers is accurately controlled to 0.8 nm ± 0.026 nm and the lasers have single mode suppression ratios larger than 50 dB. Using an integrated semiconductor optical amplifier, the output power can reach 33 mW and the optical linewidth of the DFB lasers can be as narrow as 64 kHz. This laser array uses a ridge waveguide with sidewall gratings and needs only one metalorganic vapor-phase epitaxy (MOVPE) step and one III-V material etching process, simplifying the whole device fabrication process, and meeting the requirements of dense wavelength division multiplexing systems.

Gold-viral particle identification by deep learning in wide-field photon scattering parametric images.

The ability to identify virus particles is important for research and clinical applications. Because of the optical diffraction limit, conventional optical microscopes are generally not suitable for virus particle detection, and higher resolution instruments such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM) are required. In this paper, we propose a new method for identifying virus particles based on polarization parametric indirect microscopic imaging (PIMI) and deep learning techniques. By introducing an abrupt change of refractivity at the virus particle using antibody-conjugated gold nanoparticles (AuNPs), the strength of the photon scattering signal can be magnified. After acquiring the PIMI images, a deep learning method was applied to identify discriminating features and classify the virus particles, using electron microscopy (EM) images as the ground truth. Experimental results confirm that gold-virus particles can be identified in PIMI images with a high level of confidence.

Irregular stimulus distribution increases the negative footprint illusion.

As a climate change mitigation strategy, environmentally certified 'green' buildings with low carbon footprints are becoming more prevalent in the world. An interesting psychological question is how people perceive the carbon footprint of these buildings given their spatial distributions in a given community. Here we examine whether regular distribution (i.e., buildings organized in a block) or irregular distribution (i.e., buildings randomly distributed) influences people's perception of the carbon footprint of the communities. We first replicated the negative footprint illusion, the tendency to estimate a lower carbon footprint of a combined group of environmentally certified green buildings and ordinary conventional buildings, than the carbon footprint of the conventional buildings alone. Importantly, we found that irregular distribution of the buildings increased the magnitude of the negative footprint illusion. Potential applied implications for urban planning of green buildings are discussed.

Characterization of deep sub-wavelength nanowells by imaging the photon state scattering spectra.

Optical-matter interactions and photon scattering in a sub-wavelength space are of great interest in many applications, such as nanopore-based gene sequencing and molecule characterization. Previous studies show that spatial distribution features of the scattering photon states are highly sensitive to the dielectric and structural properties of the nanopore array and matter contained on or within them, as a result of the complex optical-matter interaction in a confined system. In this paper, we report a method for shape characterization of subwavelength nanowells using photon state spatial distribution spectra in the scattering near field. Far-field parametric images of the near-field optical scattering from sub-wavelength nanowell arrays on a SiN substrate were obtained experimentally. Finite-difference time-domain simulations were used to interpret the experimental results. The rich features of the parametric images originating from the interaction of the photons and the nanowells were analyzed to recover the size of the nanowells. Experiments on nanoholes modified with Shp2 proteins were also performed. Results show that the scattering distribution of modified nanoholes exhibits significant differences compared to empty nanoholes. This work highlights the potential of utilizing the photon status scattering of nanowells for molecular characterization or other virus detection applications.

Quantitative analysis of errors caused by vibration on polarization parametric indirect microscopic imaging system.

Vibrations cause many problems such as displacement, distortion, and defocusing in microscopic imaging systems. Because vibration errors are random in direction, amplitude, and frequency, it is not known which aspect of the image quality will be affected by these problems and to what extent. Polarization parametric indirect microscopic imaging (PIMI) is a technique that records polarization parameters in a conventional wide-field reflection microscope using polarization modulation of the illumination beam and additional data analysis of the raw images. This indirect imaging technique allows the spatial resolution of the system to be improved. Here, the influence of vibration on the image sharpness and spatial resolution of a PIMI system is analyzed theoretically and experimentally. Degradation in the sharpness of PIMI images is quantified by means of the modulation transfer function and deterioration in the effective spatial resolution by the Fourier ring correlation. These results show that the quality of PIMI images can be improved significantly using vibration isolation.

British Society of Gastroenterology/Association of Coloproctology of Great Britain and Ireland/Public Health England post-polypectomy and post-colorectal cancer resection surveillance guidelines.

These consensus guidelines were jointly commissioned by the British Society of Gastroenterology (BSG), the Association of Coloproctology of Great Britain and Ireland (ACPGBI) and Public Health England (PHE). They provide an evidence-based framework for the use of surveillance colonoscopy and non-colonoscopic colorectal imaging in people aged 18 years and over. They are the first guidelines that take into account the introduction of national bowel cancer screening. For the first time, they also incorporate surveillance of patients following resection of either adenomatous or serrated polyps and also post-colorectal cancer resection. They are primarily aimed at healthcare professionals, and aim to address:Which patients should commence surveillance post-polypectomy and post-cancer resection?What is the appropriate surveillance interval?When can surveillance be stopped? two or more premalignant polyps including at least one advanced colorectal polyp (defined as a serrated polyp of at least 10 mm in size or containing any grade of dysplasia, or an adenoma of at least 10 mm in size or containing high-grade dysplasia); or five or more premalignant polyps The Appraisal of Guidelines for Research and Evaluation (AGREE II) instrument provided a methodological framework for the guidelines. The BSG's guideline development process was used, which is National Institute for Health and Care Excellence (NICE) compliant.two or more premalignant polyps including at least one advanced colorectal polyp (defined as a serrated polyp of at least 10 mm in size or containing any grade of dysplasia, or an adenoma of at least 10 mm in size or containing high-grade dysplasia); or five or more premalignant polyps The key recommendations are that the high-risk criteria for future colorectal cancer (CRC) following polypectomy comprise either:two or more premalignant polyps including at least one advanced colorectal polyp (defined as a serrated polyp of at least 10 mm in size or containing any grade of dysplasia, or an adenoma of at least 10 mm in size or containing high-grade dysplasia); or five or more premalignant polyps This cohort should undergo a one-off surveillance colonoscopy at 3 years. Post-CRC resection patients should undergo a 1 year clearance colonoscopy, then a surveillance colonoscopy after 3 more years.

Visualization of ultrasonic wave field by stroboscopic polarization selective imaging.

A stroboscopic method based on polarization selective imaging is proposed for dynamic visualization of ultrasonic waves propagating in a transparent medium. Multiple independent polarization parametric images were obtained, which enabled quantitative evaluation of the distribution of the ultrasonic pressure in quartz. In addition to the detection of optical phase differences δ in conventional photo-elastic techniques, the azimuthal angle φ and the Stokes parameter S2 of the polarized light are found to be highly sensitive to the wave-induced refraction index distribution, opening a new window on ultrasonic field visualization.

Frequency comb with 100 GHz spacing generated by an asymmetric MQW passively mode-locked laser.

A L-band two-section AlGaInAs/InP asymmetric multiple quantum well (QW) passively mode-locked laser has been used to generate a frequency comb with a 100 GHz spacing at a central wavelength of 1610 nm. The comb contains 10 optical lines within a -3dB bandwidth of 8.05 nm and 34 optical lines within a -20dB bandwidth of 30 nm. The mode-locked pulse duration was 440 fs. To the best of our knowledge, this is the shortest pulse duration from any directly electrically pumped QW semiconductor mode-locked laser.

Are individual differences in auditory processing related to auditory distraction by irrelevant sound? A replication study.

Irrelevant sounds can be very distracting, especially when trying to recall information according to its serial order. The irrelevant sound effect (ISE) has been studied in the literature for more than 40 years, yet many questions remain. One goal that has received little attention involves the discernment of a predictive factor, or individual difference characteristic, that would help to determine the size of the ISE. The current experiments were designed to replicate and extend prior work by Macken, Phelps, and Jones (Psychonomic Bulletin & Review, 16, 139-144, 2009), who demonstrated a significant predictive relationship between the size of the ISE and a type of auditory processing called global pattern matching. The authors also found a relationship between auditory processing involving deliberate recoding of sounds and serial order recall performance in silence. Across two experiments, this dissociation was not replicated. Additionally, the two types of auditory processing were not significantly correlated with each other. The lack of a clear pattern of findings replicating the Macken et al. (Psychonomic Bulletin & Review, 16, 139-144, 2009) study raises several questions regarding the need for future research on the characteristics of these auditory processing tasks, and the stability of the measurement of the ISE itself.

Acceptance and Commitment Therapy Delivered via a Mobile Phone Messaging Robot to Decrease Postoperative Opioid Use in Patients With Orthopedic Trauma: Randomized Controlled Trial.

BACKGROUND: Acceptance and commitment therapy (ACT) is a pragmatic approach to help individuals decrease avoidable pain. OBJECTIVE: This study aims to evaluate the effects of ACT delivered via an automated mobile messaging robot on postoperative opioid use and patient-reported outcomes (PROs) in patients with orthopedic trauma who underwent operative intervention for their injuries. METHODS: Adult patients presenting to a level 1 trauma center who underwent operative fixation of a traumatic upper or lower extremity fracture and who used mobile phone text messaging were eligible for the study. Patients were randomized in a 1:1 ratio to either the intervention group, who received twice-daily mobile phone messages communicating an ACT-based intervention for the first 2 weeks after surgery, or the control group, who received no messages. Baseline PROs were completed. Two weeks after the operative intervention, follow-up was performed in the form of an opioid medication pill count and postoperative administration of PROs. The mean number of opioid tablets used by patients was calculated and compared between groups. The mean PRO scores were also compared between the groups. RESULTS: A total of 82 subjects were enrolled in the study. Of the 82 participants, 76 (38 ACT and 38 controls) completed the study. No differences between groups in demographic factors were identified. The intervention group used an average of 26.1 (SD 21.4) opioid tablets, whereas the control group used 41.1 (SD 22.0) tablets, resulting in 36.5% ([41.1-26.1]/41.1) less tablets used by subjects receiving the mobile phone-based ACT intervention (P=.004). The intervention group subjects reported a lower postoperative Patient-Reported Outcome Measure Information System Pain Intensity score (mean 45.9, SD 7.2) than control group subjects (mean 49.7, SD 8.8; P=.04). CONCLUSIONS: In this study, the delivery of an ACT-based intervention via an automated mobile messaging robot in the acute postoperative period decreased opioid use in selected patients with orthopedic trauma. Participants receiving the ACT-based intervention also reported lower pain intensity after 2 weeks, although this may not represent a clinically important difference. TRIAL REGISTRATION: ClinicalTrials.gov NCT03991546; https://clinicaltrials.gov/ct2/show/NCT03991546.

Rapid Recovery Total Joint Arthroplasty is Safe, Efficient, and Cost-Effective in the Veterans Administration Setting.

BACKGROUND: Institutional pathways in total joint arthroplasty (TJA) have been shown to reduce costs and improve patient care, but questions remain regarding their efficacy in certain populations. We sought to evaluate the comprehensive effect of a rapid recovery perioperative TJA protocol in the Veterans Health Administration (VA) setting. METHODS: In a VA hospital, a rapid recovery protocol was implemented for all patients undergoing primary total hip or knee arthroplasty. A retrospective chart review was performed comparing pre-protocol (n = 174) and protocol (n = 78) cohorts. Measured outcomes included length of stay (LOS), discharge destination, unplanned readmissions, overall complications, and total cost of healthcare during admission and at 30 and 90 days postoperatively. RESULTS: After implementation of the protocol, the average LOS decreased from 3.2 to 1.7 days (P < .0001). In the protocol group, there was a 12.3% increase in patients discharging directly home (85.1% vs 97.4%, P = .005). There were lower unplanned readmissions (6.3% vs 3.8%, P = .56) and overall complications (7.5% vs 3.8%, P = .40), but these were not statistically significant. The summative cost of all perioperative healthcare was lower after implementation of the protocol during the inpatient stay ($19,015 vs $21,719, P = .002) and out to 30 days postoperatively ($21,083 vs $23,420, P = .03) and 90 days postoperatively ($24,189 vs $26,514, P = .07). CONCLUSION: In the VA setting, implementation of a rapid recovery TJA protocol led to decreased LOS, decreased cost of perioperative healthcare, and an increase in patients discharging directly home without increased readmission or complication rates. Such protocols are essential as we transition into an era of value-based arthroplasty.

Multiple-wavelength distributed-feedback laser arrays with high coupling coefficients and precise channel spacing.

Special designs of sampled Bragg gratings have been used to fabricate distributed-feedback semiconductor laser arrays with very precise wavelength spacing and strong coupling coefficients. By dividing one sampling period into two equal sections, each with a grating but with a π-phase shift between the sections, the ±1st-order channels are enhanced while eliminating the zeroth-order reflection. By using multiple phase-shifted sections, only the -1st-order channel is enhanced. Using a single electron beam lithography step and two π-phase-shifted sections, we have fabricated an eight-channel laser array with a channel spacing of 100 GHz.

Trouble articulating the right words: Evidence for a response-exclusion account of distraction during semantic fluency.

It is widely held that single-word lexical access is a competitive process, a view based largely on the observation that naming a picture is slowed in the presence of a distractor-word. However, problematic for this view is that a low-frequency distractor-word slows the naming of a picture more than does a high-frequency word. This supports an alternative, response-exclusion, account in which a distractor-word interferes because it must be excluded from an articulatory output buffer before the right word can be articulated (the picture name): A high, compared to low, frequency word accesses the buffer more quickly and, as such, can also be excluded more quickly. Here we studied the respective roles of competition and response-exclusion for the first time in the context of semantic verbal fluency, a setting requiring the accessing of, and production of, multiple words from long-term memory in response to a single semantic cue. We show that disruption to semantic fluency by a sequence of to-be-ignored spoken distractors is also greater when those distractors are low in frequency, thereby extending the explanatory compass of the response-exclusion account to a multiple-word production setting and casting further doubt on the lexical-selection-by-competition view. The results can be understood as reflecting the contribution of speech output processes to semantic fluency.

Improvement of indoor VLC network downlink scheduling and resource allocation.

Indoor visible light communications (VLC) combines illumination and communication by utilizing the high-modulation-speed of LEDs. VLC is anticipated to be complementary to radio frequency communications and an important part of next generation heterogeneous networks. In order to make the maximum use of VLC technology in a networking environment, we need to expand existing research from studies of traditional point-to-point links to encompass scheduling and resource allocation related to multi-user scenarios. This work aims to maximize the downlink throughput of an indoor VLC network, while taking both user fairness and time latency into consideration. Inter-user interference is eliminated by appropriately allocating LEDs to users with the aid of graph theory. A three-term priority factor model is derived and is shown to improve the throughput performance of the network scheduling scheme over those previously reported. Simulations of VLC downlink scheduling have been performed under proportional fairness scheduling principles where our newly formulated priority factor model has been applied. The downlink throughput is improved by 19.6% compared to previous two-term priority models, while achieving similar fairness and latency performance. When the number of users grows larger, the three-term priority model indicates an improvement in Fairness performance compared to two-term priority model scheduling.