Predictors of periapical bone healing associated with teeth having large periapical lesions following nonsurgical root canal treatment or retreatment: A cone beam computed tomography-based retrospective study.

AIM: Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the relationship between the time to complete healing when analysed using cone beam computed tomography (CBCT) and other possible predictors that affect healing. METHODOLOGY: Seventy-nine patients were treated during the years 2013-2020 with large periapical lesions of endodontic origin (10-15 mm) as observed on intraoral periapical radiographs (IOPAR) were included. IOPAR and CBCT were available before treatment and during the follow-up (IOPAR every 6 months and CBCT every 12 months). The volume of periapical lesions was calculated by OsiriX Lite software. Variables such as initial volume of the lesion, age, gender, type of treatment or type of root canal filling were compared to identify the differences between healed and unhealed lesions. Pearson's Chi-square test was used for categorical variables, the t-test for age and the Wilcoxon test for initial volume of the lesion. The association between time to healing and the variables was assessed using univariate analysis and multivariate analysis. The Wilcoxon test was used to observe the association of healing time with categorical variables and the correlation index was measured with the quantitative variables. RESULTS: Of the 79 cases analysed, 60 lesions (76%) were completely healed as verified by CBCT in a mean healing time of 19 months, of which 60% healed fully between 12 and 18 months. Increase in age of patient and larger initial volume of the lesion were associated with a significantly longer healing time (p < .001). Gender, filling material and type of treatment did not have a significant effect on the healing process (p > .05). CONCLUSIONS: Clinicians should be aware that periapical lesions in older patients and larger areas of bone loss take longer to heal. CBCT monitoring of large periapical lesions is critical and it can help clinicians in the decision-making process.

Nanostructured ZnO thin film to enhance gutta-percha's adhesion to endodontic sealers.

BACKGROUND: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface's functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers. METHODS: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP's surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers' adhesion to GP. ANOVA procedures were used for data statistical analysis. RESULTS: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value. CONCLUSIONS: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP's adhesion to Endoresin and AH Bioceramic sealers.

Acid-Sensing Ion Channels' Immunoreactivity in Nerve Profiles and Glomus Cells of the Human Carotid Body.

The carotid body is a major peripheral chemoreceptor that senses changes in arterial blood oxygen, carbon dioxide, and pH, which is important for the regulation of breathing and cardiovascular function. The mechanisms by which the carotid body senses O2 and CO2 are well known; conversely, the mechanisms by which it senses pH variations are almost unknown. Here, we used immunohistochemistry to investigate how the human carotid body contributes to the detection of acidosis, analyzing whether it expresses acid-sensing ion channels (ASICs) and determining whether these channels are in the chemosensory glomic cells or in the afferent nerves. In ASIC1, ASIC2, and ASIC3, and to a much lesser extent ASIC4, immunoreactivity was detected in subpopulations of type I glomus cells, as well as in the nerves of the carotid body. In addition, immunoreactivity was found for all ASIC subunits in the neurons of the petrosal and superior cervical sympathetic ganglia, where afferent and efferent neurons are located, respectively, innervating the carotid body. This study reports for the first time the occurrence of ASIC proteins in the human carotid body, demonstrating that they are present in glomus chemosensory cells (ASIC1 < ASIC2 > ASIC3 > ASIC4) and nerves, presumably in both the afferent and efferent neurons supplying the organ. These results suggest that the detection of acidosis by the carotid body can be mediated via the ASIC ion channels present in the type I glomus cells or directly via sensory nerve fibers.

Attitude and practice of regenerative endodontic procedures among endodontists and paediatric dentists: A multinational survey from 13 countries.

BACKGROUND: Regenerative endodontics (RET) refers to biologically based procedures that aim to restore damaged tooth structures and reinstate the pulp-dentine complex to its normal physiological state. AIM: The purpose of this study was to examine the attitudes and practices of endodontists and paediatric dentists regarding RET. DESIGN: A survey was conducted among endodontists and paediatric dentists from 13 countries. A number of factors were evaluated, including frequency of RET application, followed guidelines, disinfection techniques, intracanal medication type, scaffold type, preferred coronal seal material, and follow-up period. RESULTS: Among the 1394 respondents, 853 (61.2%) and 541 (38.8%) were endodontists and paediatric dentists, respectively. Almost half (43%) of participants have not performed RET yet. The American Association of Endodontics guideline (47.3%) was selected as the primary source for the clinical protocol. The most frequently selected irrigant solution was 1.5%-3% NaOCl at the first (26.1%) and second (13.6%) sessions. A blood clot (68.7%) and MTA (61.9%) were the most frequently selected scaffold type and coronal barrier. Most participants preferred a 6-month follow-up period. CONCLUSION: According to this survey, deviations exist from current RET guidelines regarding all aspects evaluated. Standardizing clinical protocols and adhering to available guidelines would help to ensure more predictable outcomes.

Endodontic Rotary Files, What Should an Endodontist Know?

Clinicians should be aware of all the characteristics and capacities of the instruments that are possible to use when conducting a root canal treatment. The wide variety of nickel-titanium (Ni-Ti) rotary systems on the market and the lack of standardisation of this type of instrument makes the choice in each specific case difficult. Therefore, this review is intended to summarize the characteristics that should be taken into account when choosing one instrument over another. It will be essential to know characteristics, of alloy from which the instrument is made. Moreover, the geometry of the instrument will determine its behaviour, being the mass, the one that marks its resistance to a greater extent. The movement performed by the file is another of the fundamental keys to understand rotary instruments. In conclusion, when performing root canal treatment, the characteristics of the instrument and the tooth must be taken into account, and the operator's own limitations should be known. This paper provides the key points to keep in mind when making this type of treatment.

Periodontal response to a tricalcium silicate material or resin composite placed in close contact to the supracrestal tissue attachment: a histomorphometric comparative study.

OBJECTIVE: Subgingival dental restorations and periodontal health have been studied for many years; however, there is a low histological evidence on the behavior of new materials in the supracrestal tissue attachment. The aim of this study is to analyze the periodontal response when a tricalcium silicate material (TSM) or composite margin restorations is placed to 0.5 mm and 1.5 mm from the bone crest with a histomorphometric analysis in dogs. METHODS: Nine mongrel dogs were used in this study: four dogs (8 canine teeth) for TSM group, 4 dogs (8 canine teeth) for composite group, and 1 dog (2 canine teeth) with cavities without restorations. Cavity preparation of 2×2×1 mm was created on the buccal aspect of the canines at 0.5 and 1.5 mm of the crestal bone. Cavities were restored with composite and TSM or were left unrestored as control. After 12 weeks of healing, the dogs were euthanized and blocks containing the tooth and soft tissues were processed. RESULTS: In all the specimens, the junction epithelium was stablished apical to the tooth preparations. A shorter distance to the bone (0.5 cavity) implies greater apical periodontal migration regardless of the material used. In the TSM groups, the connective tissue height and the distance between bone level and apical margin preparation were greater than those in the composite groups, while the epithelium height was less. However, there were no statistically significant differences comparing TSM and composite groups at either 0.5 mm or 1.5 mm (p > 0.05). CONCLUSION: Histologic analysis did not show periodontal reattachment to TSM or composite. In both cases, bone crest migrates apically. For that reason, it is recommended to perform composite restorations at the subgingival level whenever the distance to the bone crest is at least 2 mm. CLINICAL RELEVANCE: Both composite and TSM do not achieve reinsertion of the connective tissue in the biological width.

Ageing of the somatosensory system at the periphery: age-related changes in cutaneous mechanoreceptors.

Decline of tactile sensation associated with ageing depends on modifications in skin and both central and peripheral nervous systems. At present, age-related changes in the periphery of the somatosensory system, particularly concerning the effects on mechanoreceptors, remain unknown. Here we used immunohistochemistry to analyse the age-dependent changes in Meissner's and Pacinian corpuscles as well as in Merkel cell-neurite complexes. Moreover, variations in the neurotrophic TrkB-BDNF system and the mechanoprotein Piezo2 (involved in maintenance of cutaneous mechanoreceptors and light touch, respectively) were evaluated. The number of Meissner's corpuscles and Merkel cells decreased progressively with ageing. Meissner's corpuscles were smaller, rounded in morphology and located deeper in the dermis, and signs of corpuscular denervation were found in the oldest subjects. Pacinian corpuscles generally showed no relevant age-related alterations. Reduced expression of Piezo2 in the axon of Meissner's corpuscles and in Merkel cells was observed in old subjects, as well was a decline in the BDNF-TrkB neurotrophic system. This study demonstrates that cutaneous Meissner's corpuscles and Merkel cell-neurite complexes (and less evidently Pacinian corpuscles) undergo morphological and size changes during the ageing process, as well as a reduction in terms of density. Furthermore, the mechanoprotein Piezo2 and the neurotrophic TrkB-BDNF system are reduced in aged corpuscles. Taken together, these alterations might explain part of the impairment of the somatosensory system associated with ageing.

Facial Donor Restoration: One-Step Technique.

PURPOSE: Successful management of facial allotransplantation requires planning and overcoming a long list of obstacles, not least, the restoration of the donor cadaver (DC). MATERIALS AND METHODS: We have presented an innovative single-step facial reconstruction technique for the DC using light-curing material to simplify the infrastructure needs and optimize the time and costs associated with traditional facial restoration techniques reported to date. We also developed a study based on the creation of 7 facial masks over a white male formaldehyde-preserved cadaver head to evaluate the production time of the mask, likeness to the original face, temperature, and adaptation of the mask to the defect. RESULTS: The average time for the adjustment of the light-curing resin sheets over the DC, photopolymerization, and cosmetic adjustment and application over the facial defect was 5, 4, and 16.4 minutes, respectively, for a global average time of 25.4 minutes. In all cases, the likeness to the original was good, and the average temperature over the donor area was 19.8°C. The adaptation of the mask to the facial defect was accurate in all cases. CONCLUSIONS: The presented one-step technique proposed for facial restoration of the DC had a short learning curve, low costs, and accurate and predictable results.

Surgical extrusion with biologically oriented preparation: An alternative to extraction.

Surgical extrusion should be considered as an alternative treatment in patients with structurally compromised teeth that retain coronal integrity and have favorable root anatomy. The procedure described is straightforward and can be performed quickly. A situation in which it was used to treat a maxillary premolar with substantial structural loss but well-preserved periodontal attachment is presented. The biologically oriented preparation technique is a conservative method of tooth restoration.

The accuracy of estimating chronological age from Demirjian and Nolla methods in a Portuguese and Spanish sample.

BACKGROUND: Age determination has great importance in many clinical decisions, being commonly used in odontopediatrics, orthodontics, pediatrics, and forensic medicine. The Nolla and Demirjian et al. methods have been used for these purposes. However, estimating chronological age by means of the dental mineralization stage is not a straightforward analysis, and it is fundamental to test the validity of these methods and their applicability to populations. In this article we intend to compare the accuracy of estimating chronological age from dental age measured with the Nolla and Demirjian methods in a Portuguese and Spanish sample, considering the variables of sex and age-group. METHODS: The sample was composed of 821 orthopantomographs of healthy Portuguese (n = 270) and Spanish (n = 551) subjects from 4 to 34 years old. For the Nolla and Demirjian methods, seven mandibular left teeth were examined, staged according to the dental maturity scale of each method. We obtained a good index of inter-rater agreement, a good internal consistency for the teeth assessment, and a good temporal consistency. RESULTS: Dental age was calculated for each method. The Demirjian et al. method tends to overestimate the real age of participants and the Nolla method tends to underestimate it. The accuracy of both methods varied between the sexes and age groups. Both methods were found to be more precise with males. As the age-group increases, the predictive capacities of both methods diminish. The Nolla method was more accurate than the Demirjian method in early and late childhood for both sexes. Neither method could predict chronological age in adults. CONCLUSIONS: We can estimate chronological age for early and late childhood, through the Nolla and Demirjian methods, with the former showing greater predictive capacities than the latter. The Demirjian method tends to overestimate age and the Nolla method tends to underestimate it, leading to the importance of forming regression equations adapted to the population studied. Nolla and Demirjian formulas adapted to our sample were created as a function of sex and age-group.

Immunolocalization of the mechanogated ion channels PIEZO1 and PIEZO2 in human and mouse dental pulp and periodontal ligament.

PIEZO1 and PIEZO2 are essential components of mechanogated ion channels, which are required for mechanotransduction and biological processes associated with mechanical stimuli. There is evidence for the presence of PIEZO1 and PIEZO2 in teeth and periodontal ligaments, especially in cell lines and mice, but human studies are almost nonexistent. Decalcified permanent human teeth and mouse molars were processed for immunohistochemical detection of PIEZO1 and PIEZO2. Confocal laser microscopy was used to examine the co-localization of PIEZO 1 and PIEZO2 with vimentin (a marker of differentiated odontoblasts) in human teeth. In the outer layer of the human dental pulp, abundant PIEZO1- and PIEZO2-positive cells were found that had no odontoblast morphology and were vimentin-negative. Based on their morphology, location, and the absence of vimentin positivity, they were identified as dental pulp stem cells or pre-odontoblasts. However, in mice, PIEZO1 and PIEZO2 were ubiquitously detected and colocalized in odontoblasts. Intense immunoreactivity of PIEZO1 and PIEZO2 has been observed in human and murine periodontal ligaments. Our findings suggest that PIEZO1 and PIEZO2 may be mechanosensors/mechanotransducers in murine odontoblasts, as well as in the transmission of forces by the periodontal ligament in humans and mice.

Proprioceptive innervation of the human lips.

The objective of this study was to analyze the proprioceptive innervation of human lips, especially of the orbicularis oris muscle, since it is classically accepted that facial muscles lack typical proprioceptors, that is, muscle spindles, but recently this has been doubted. Upper and lower human lips (n = 5) from non-embalmed frozen cadavers were immunostained for detection of S100 protein (to identify nerves and sensory nerve formations), myosin heavy chain (to label muscle fibers within muscle spindles), and the mechano-gated ion channel PIEZO2. No muscle spindles were found, but there was a high density of sensory nerve formations, which were morphologically heterogeneous, and in some cases resemble Ruffini-like and Pacinian sensory corpuscles. The axons of these sensory formations displayed immunoreactivity for PIEZO2. Human lip muscles lack typical proprioceptors but possess a dense sensory innervation which can serve the lip proprioception.

Immunohistochemical detection of PIEZO1 and PIEZO2 in human digital Meissner´s corpuscles.

BACKGROUND: The cutaneous end organ complexes or cutaneous sensory corpuscles are specialized sensory organs associated to low-threshold mechanoreceptors. Mechano-gated proteins forming a part of ion channels have been detected in both the axon and terminal glial cells of Meissner corpuscles, a specific cutaneous end organ complex in the human glabrous skin. The main candidates to mechanotransduction in Meissner corpuscles are members of the Piezo family of cationic ion channels. PIEZO2 has been detected in the axon of these sensory structures whereas no data exists about the occurrence and cell localization of PIEZO1. METHODS: Skin samples (n = 18) from the palmar aspect of the distal phalanx of the first and second fingers were analysed (8 female and 10 males; age range 26 to 61 26-61 years). Double immunofluorescence for PIEZO1 and PIEZO2 together with axonal or terminal glial cell markers was captured by laser confocal microscopy, and the percentage of PIEZOs positive Meissner corpuscles was evaluated. RESULTS: MCs from human fingers showed variable morphology and degree of lobulation. Regarding the basic immunohistochemical profile, in all cases the axons were immunoreactive for neurofilament proteins, neuron specific enolase and synaptophysin, while the lamellar cells displayed strong S100P immunoreactivity. PIEZO1 was detected co-localizing with axonal markers, but never with terminal glial cell markers, in the 56% of Meissner corpuscles; weak but specific immunofluorescence was additionally detected in the epidermis, especially in basal keratinocytes. Similarly, PIEZO2 immunoreactivity was found restricted to the axon in the 85% of Meissner corpuscles. PIEZO2 positive Merkel cells were also regularly found. CONCLUSIONS: PIEZO1 and PIEZO2 are expressed exclusively in the axon of a subpopulation of human digital Meissner corpuscles, thus suggesting that not only PIEZO2, but also PIEZO1 may be involved in the mechanotransduction from low-threshold mechanoreceptors.

New Technique for Wedge Selection in Direct Class II Restorations: A Pilot Study.

Background: Performing an appropriate Class II direct restoration is a great challenge. The correct selection of the matrix system and the elements used for its stabilization will have a great impact on the result. The aim of this study is to show a new digital method for a predictable selection of the wedge and compare it with the conventional method. Methods: Sixty patients were randomly divided into two groups. In Group 0, the wedge was selected intraoperatively by visual examination, while in Group 1 the wedge was selected preoperatively through the measurement of the cervical embrasure on the bite-wing radiography. The number of wedges used, modifications to them, and tissue damage were registered, along with the quality of the proximal contact and the marginal adaptation. Results: Student's t-test revealed a statistical difference between the number of wedges used, which was higher in Group 0 (p < 0.05). Pearson Chi-square test showed that tissue damage was statistically higher in Group 0 (p < 0.05), while there was no statistically significant difference between groups in wedge modifications (p > 0.05). Group 1 revealed a higher frequency of satisfactory proximal contact and marginal adaptation (p < 0.05). Conclusions: This new technique reduces wedges waste and tissue damage and provides an adequate interproximal anatomy.

Cone-Beam Computed Tomography for the Evaluation of Dental Pulp Chamber Volume: Implications for Clinics and Teaching.

The dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone-beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating the pulp chamber volume of the upper central incisors ex vivo. The intra-operator and inter-operator errors were evaluated, and the results for the two techniques were compared with those of a T-test for paired samples. The intra-operator and inter-operator errors were >0.05, indicating adequate reproducibility in each operator and no significant differences between their measurements. On the other hand, no significant differences between the two measurement techniques were found. The present results demonstrate that CBCT is a precise, feasible, and reproducible technique for the evaluation of the dental pulp chamber volume ex vivo. The results provided with this method are useful for different medical domains but also for the teaching and training of undergraduate and postgraduate students. Furthermore, the findings of this study carry significant clinical implications, as the accurate assessment of the pulp chamber volume is critical in the diagnosis and treatment of various endodontic conditions. The ability of CBCT to provide reliable 3D dental anatomy measurements can enhance the planning of endodontic treatments by allowing for a better understanding of the internal tooth morphology. Additionally, the precision and reproducibility of CBCT in assessing the pulp chamber volume can contribute to improved clinical outcomes and reduced complications during endodontic procedures. These findings further support the increasingly vital role of CBCT in modern clinical practice and underscore its value as an indispensable tool in the field of dentistry.

Three-Dimensional Printed Teeth in Endodontics: A New Protocol for Microcomputed Tomography Studies.

This study aimed to describe a support material removal protocol (SMRP) from inside the root canals of three-dimensional printed teeth (3DPT) obtained by the microcomputed tomography (microCT) of a natural tooth (NT), evaluate its effectiveness by comparing the 3DPT to NT in terms of internal anatomy and behaviour toward endodontic preparation, and evaluate if 3DPT are adequate to assess the differences between two preparation systems. After the SMRP, twenty 3DPT printed by PolyJet™ were microCT scanned before preparation and thereafter randomly assigned into two groups (n = 10). One group and NT were prepared using ProTaper Gold® (PTG), and the other group with Endogal® (ENDG). MicroCT scans were carried out after preparation, and the volume increase, volume of dentin removed, centroids, transportation, and unprepared areas were compared. For the parameters evaluated, no significant differences were found between the 3DPT and NT before and after preparation (p > 0.05), and no significant differences were found between the 3DPT PTG group and the 3DPT ENDG group (p > 0.05). It can be concluded that the SMRP described is effective in removing the support material SUP706B™. PolyJet™ is adequate for printing 3DPT. Furthermore, 3DPT printed with high-temperature RGD525™ have similar behaviour during endodontic preparation with PTG as the NT, and 3DPT can be used to compare two preparation systems.

A retrospective clinical study to compare the ability of cone-beam computed tomographic images and periapical radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures.

BACKGROUND: This retrospective clinical study aimed to compare the sensitivity of cone-beam computed tomographic (CBCT) images and periapical (PA) radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures (VRFs). METHODS: The authors included 98 patients (98 teeth) diagnosed with a longitudinal tooth fracture (LTF) (cracked tooth, split tooth, VRF) through direct visualization after extraction and with comprehensive clinical and radiographic records. They collected demographic, clinical, and radiographic data. The authors evaluated PA radiographs and CBCT images to identify fractures, fracture lines, and the different patterns of bone loss associated with these teeth. They used the McNemar test to compare PA radiographs and CBCT scans when assessing bone loss. They used the Fisher test to determine statistical relationships between fracture types and demographic, clinical, and radiologic traits. They used an analysis of variance test to compare patient age with fracture types. RESULTS: CBCT images were significantly more effective (P < .05) in detecting bone loss patterns associated with LTFs than with PA radiographs, with 71% of cases detected via CBCT images compared with 42% via radiographs. Mean age was significantly greater (P < .05) in patients with teeth with VRFs than in patients with split teeth. A significant relationship was observed between the type of fracture and the following variables: root canal treatment (split, VRF, P = .002), deep probing depth (≥ 5 mm) (VRF, P = .026), and having more than 8 teeth extracted from the mouth (VRF, P = .032). Overall, there was a significant difference (P < .001) between the visualization of fracture lines (45% on PA radiographs, 65% on CBCT images). CONCLUSIONS: CBCT scans provided more information on LTFs than PA radiographs, particularly in the identification of periradicular bone changes. PRACTICAL IMPLICATIONS: CBCT imaging can assist in making the clinical diagnosis of LTFs through observation of bone loss patterns, providing more information than PA radiographs.

Effect of Dentin Irrigants on Push-Out Bond Strength in Resin Cementation Protocols for Fiber Posts in Endodontically Treated Teeth: An In Vitro Study.

The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore®; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore®; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus). Forty-eight hours after post cementation, ten teeth from each group were cross-sectioned into three discs (cervical, middle and apical regions). Thirty specimens of each group (n = 30) were submitted to a push-out test at a crosshead speed of 1 mm/min. The remaining two teeth of each group were sectioned in the same manner, and the resin-dentin interface was evaluated using scanning electron microscopy (SEM). The results were statistically analyzed with the ANOVA test and Tukey's test (p < 0,01). The adhesive protocols and post space region showed no significant effect on bond strength (p > 0.01). The combination of NaOCl 5% and ClearfilTM Universal Bond reduced the adhesive strength (p < 0.01). The NaOCl 5%, in relation to other irrigants, significantly decreased the push-out bond strength.

Repair versus Replacement of Defective Direct Dental Restorations: A Multinational Cross-sectional Study with Meta-Analysis.

OBJECTIVES: When dental practitioners encounter a defective restoration, they are faced with a crucial decision whether to repair or replace it. This study aims to explore international preferences for repair procedures and the clinical steps taken during the repair process. METHOD: An 11-question survey was distributed to dentists across 21 countries via different platforms. The survey comprised two sections: the first included five questions aimed at gathering demographic information, while the second consisted of six questions focusing on participants' practices related to the repair of composite or amalgam restorations A meta-analysis was employed to ascertain the pooled odds ratio of repairing versus replacement. The statistical analysis was carried out using the RevMan 5.3 program and forest plots were generated using the same program to visualize the results. RESULTS: The survey was completed by 3680 dental practitioners. The results indicated a strong tendency to repair defective composite restorations (OR: 14.23; 95% CI: 7.40, 27.35, p<0.001). In terms of amalgam, there was a significant tendency to replace the restorations (OR: 0.19; 95% CI: 0.12, 0.30, p<0.001). When repairing restorations, the most common protocols were etching with orthophosphoric acid and creating an enamel bevel, regardless of the restorative material used. CONCLUSION: The findings of this study indicate that there exists a knowledge gap among dental practitioners regarding restoration repair. It is imperative that dental practitioners receive proper education and training on restoration repair, to ensure the usage of adequate protocols and restoration survival.

Comparative Study of the Influence of Heat Treatment on Fracture Resistance of Different Ceramic Materials Used for CAD/CAM Systems.

The aim of this study was to compare the influence of heat treatment on fracture resistance (FR) of different ceramic materials used for CAD/CAM systems. METHODS: Eighty monolithic restorations were designed using the same parameters and milled with a CAD/CAM system (CEREC SW 5.0, PrimeMill, Dentsply-Sirona™, Bensheim, Germany), forming five study groups: Group 1 (n = 10), CEREC Tessera (Dentsply-Sirona™, Bensheim, Germany) crystallized (CCT), Group 2 (n = 10), CEREC Tessera uncrystallized (UCT), Group 3 (n = 20), Emax-CAD (Ivoclar Vivadent, Schaan, Liechtenstein) (CEC), Group 4 (n = 20), Vita Suprinity (Vita Zahnfabrik, Bad Säckingen, Germany) (CVS), and Group 5 (n = 20) Cameo (Aidite, Qinhuangdao, China) (CC). RESULTS: The average FR was similar for CCT, CC, and CEC at above 400 N, while CVS and UCT had the lowest values at 389,677 N and 343,212 N, respectively. CONCLUSION: Among the three ceramic materials that exhibited an FR above 400 N, CCT was considered the first recommended choice for CAD/CAM systems. This material not only demonstrated the highest FR but also exhibited outstanding consistency in the related measurements without the presence of outliers. Although the CC material showed high FR, its high dispersion revealed inconsistencies in the repetitions, suggesting caution in its use.