RESUMO
Volatile solid additives have emerged as a promising strategy for enhancing film morphology and promoting the power conversion efficiency (PCE) of organic solar cells (OSCs). Herein, a series of novel polycyclic aromatic additives with analogous chemical structures, including fluorene (FL), dibenzothiophene (DBT), and dibenzofuran (DBF) derived from crude oils, are presented and incorporated into OSCs. All these additives exhibit strong interactions with the electron-deficient terminal groups of L8-BO within the bulk-heterojunction OSCs. Moreover, they demonstrate significant sublimation during thermal annealing, leading to increase free volumes for the rearrangement and recrystallization of L8-BO. This phenomenon leads to an improved film morphology and an elevated glass-transition temperature of the photoactive layers. Consequently, the PCE of the PM6:L8-BO blend has been boosted from 16.60% to 18.60% with 40 wt% DBF additives, with a champion PCE of 19.11% achieved for ternary PM6:L8-BO:BTP-eC9 OSCs. Furthermore, the prolonged shelf and thermal stability have been observed in OSCs with these additives. This study emphasizes the synergic effect of volatile solid additives on the performance and thermal stability of OSCs, highlighting their potential for advancing the field of photovoltaics.
RESUMO
Double-cable conjugated polymers with near-infrared (NIR) electron acceptors are synthesized for use in single-component organic solar cells (SCOSCs). Through the development of a judicious synthetic pathway, the highly sensitive nature of the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC)-based electron acceptors in basic and protonic solvents is overcome. In addition, an asymmetric design motif is adopted to optimize the packing of donor and acceptor segments, enhancing charge separation efficiency. As such, the new double-cable polymers are successfully applied in SCOSCs, providing an efficiency of over 10 % with a broad photo response from 300 to 850â nm and exhibiting excellent thermal/light stability. These results demonstrate the powerful design of NIR-acceptor-based double-cable polymers and will enable SCOSCs to enter a new stage.
RESUMO
The performance of optoelectronic devices based on conjugated polymers is critically dependent upon molecular packing; however, the paracrystalline nature of these materials limits the amount of information that can be extracted from conventional X-ray diffraction. Resonant diffraction (also known as anomalous diffraction) occurs when the X-ray energy used coincides with an X-ray absorption edge in one of the constituent elements in the sample. The rapid changes in diffraction intensity that occur as the X-ray energy is varied across an absorption edge provide additional information that is lost in a conventional nonresonant experiment. Taking advantage of the fact that many conjugated polymers contain sulfur as heteroatoms, this work reveals pronounced resonant diffraction effects at the sulfur K-edge with a particular focus on the well-studied electron transporting polymer poly([N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)), P(NDI2OD-T2). The observed behavior is found to be consistent with the theory of resonant diffraction, and by simulating the energy-dependent peak intensity based on proposed crystal structures for P(NDI2OD-T2), we find that resonant diffraction can discriminate between different crystalline packing structures. The utilization of resonant diffraction opens up a new way to unlock important microstructural information about conjugated polymers for which only a handful of diffraction peaks are typically available.
RESUMO
Three n-type fused lactam semiconducting polymers were synthesized for thermoelectric and transistor applications via a cheap, highly atom-efficient, and nontoxic transition-metal free aldol polycondensation. Energy level analysis of the three polymers demonstrated that reducing the central acene core size from two anthracenes (A-A), to mixed naphthalene-anthracene (A-N), and two naphthalene cores (N-N) resulted in progressively larger electron affinities, thereby suggesting an increasingly more favorable and efficient solution doping process when employing 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) as the dopant. Meanwhile, organic field effect transistor (OFET) mobility data showed the N-N and A-N polymers to feature the highest charge carrier mobilities, further highlighting the benefits of aryl core contraction to the electronic performance of the materials. Ultimately, the combination of these two factors resulted in N-N, A-N, and A-A to display power factors (PFs) of 3.2 µW m-1 K-2, 1.6 µW m-1 K-2, and 0.3 µW m-1 K-2, respectively, when doped with N-DMBI, whereby the PFs recorded for N-N and A-N are among the highest reported in the literature for n-type polymers. Importantly, the results reported in this study highlight that modulating the size of the central acene ring is a highly effective molecular design strategy to optimize the thermoelectric performance of conjugated polymers, thus also providing new insights into the molecular design guidelines for the next generation of high-performance n-type materials for thermoelectric applications.
RESUMO
3D/2D hybrid perovskite systems have been intensively investigated to improve the stability of perovskite solar cells (PSCs), whereas undesired crystallization of 2D perovskite during the film formation process could undermine the structural stability of 2D perovskite materials, which causes serious hysteresis of PSCs after aging. This issue is, however, rarely studied. The stability study for 3D/2D hybrid systems to date is all under the one-direction scan, and the lack of detailed information on the hysteresis after aging compromises the credibility of the stability results. In this work, by correlating the hysteresis of the hybrid PSCs with the 2D crystal structure, we find that the prompt 2D perovskite formation process easily induces numerous crystal imperfections and structural defects. These defects are susceptible to humidity attack and decompose the 2D perovskite to insulating long-chain cations and 3D perovskite, which hinder charge transfer or generate charge accumulation. Therefore, a large hysteresis is exhibited after aging the 3D/2D hybrid PSCs in an ambient environment, even though the reverse-scan power conversion efficiency (PCE) is found to be well-preserved. To address this issue, alkali cations, K+ and Rb+, are introduced into the 2D perovskite to exquisitely modulate the crystal formation, which gives rise to a higher crystallinity of 2D perovskite and a better film morphology with fewer defects. We achieved PCE beyond 21% due to the preferable charge transfer process and reduced nonradiative recombination losses. The structural features also bring about impressive moisture stability, which results in the corresponding PSCs retaining 93% of its initial PCE and negligible hysteresis after aging in an ambient atmosphere for 1200 h.
RESUMO
We developed a series of highly crystalline double-cable conjugated polymers for application in single-component organic solar cells (SCOSCs). These polymers contain conjugated backbones as electron donor and pendant perylene bisimide units (PBIs) as electron acceptor. PBIs are connected to the backbone via alkyl units varying from hexyl (C6 H12 ) to eicosyl (C20 H40 ) as flexible linkers. For double-cable polymers with short linkers, the PBIs tend to stack in a head-to-head fashion, resulting in large d-spacings (e.g. 64â Å for the polymer P12 with C12 H24 linker) along the lamellar stacking direction. When the length of the linker groups is longer than a certain length, the PBIs instead adopt a more ordered packing likely via H-aggregation, resulting in short d-spacings (e.g. 50â Å for the polymer P16 with C16 H32 linker). This work highlights the importance of linker length on the molecular packing of the acceptor units and the influences on the photovoltaic performance of SCOSCs.
RESUMO
Chirality, as a fundamental symmetry property, plays an important role in molecular assembly in the solid state, impacting upon the properties and performance of organic materials. Here, heterochiral assembly was observed upon a binaphthol-based axially chiral material in the thin film state, where the heterochiral assemblies of racemic mixtures exhibit superior crystallization behavior and film morphologies than their homochiral counterparts. Additionally, a dramatic increase (nearly 2 orders of magnitudes) in electronic mobility was obtained upon switching the active layers of organic thin-film transistors from homochiral assemblies to heterochiral assemblies. This work not only gives insights into the structure-aggregation property relationships of axially chiral self-assemblies but also offers new opportunities for novel organic soft materials.
RESUMO
The near edge X-ray absorption fine structure (NEXAFS) spectra of naphthalene diimide molecules with increasing degrees of thionation show distinct and systematic changes in the C 1s â π* manifold. However, interpretation of such spectra is difficult using experimental data alone, due to the limitation in experimental NEXAFS resolution. In this work, we have calculated the NEXAFS spectra of naphthalene diimide molecules with increasing degrees of thionation using the density functional theory-based eXcited electron and Core Hole approach. We find that the systematic broadening and intensity reduction in the peaks observed in the π* manifold with increasing thionation are the result of distinct changes in the chemical environment of the outer carbon atoms that are bonded directly to either oxygen or sulfur. Specifically, the C 1s â lowest unoccupied molecular orbital (LUMO) transition energy dramatically decreases with thionation, as the valence electron density of these carbon atoms is increased when highly electronegative oxygen atoms are replaced by less-oxidizing sulfur atoms. It is also shown that significant core level shifts present in naphthalene diimide-based molecule result in a mixing of the LUMO and LUMO + 1 character in the C 1s â π* manifold, meaning that experimentally observed peaks cannot be uniquely associated with the transitions of LUMO, LUMO + 1, etc.
RESUMO
Development of high-performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid-cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium-substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0-2.3â cm2 V-1 s-1 in doping-states for polymers, PDPPSe-12 exhibits a maximum power factor and ZT of up to 364â µW m-1 K-2 and 0.25, respectively. The performance is more than twice that of the sulfur-based DPP derivative and represents the highest value for p-type organic thermoelectric materials based on high-mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state-of-the-art performances.
RESUMO
Herein, we report on the charge dynamics of photovoltaic devices based on two novel small-molecule nonfullerene acceptors featuring a central ketone unit. Using ultrafast near-infrared spectroscopy with optical and photocurrent detection methods, we identify one of the key loss channels in the devices as geminate recombination (GR) of interfacial charge transfer states (CTSs). We find that the magnitude of GR is highly sensitive to the choice of solvent and annealing conditions. Interestingly, regardless of these processing conditions, the same lifetime for GR (â¼130 ps) is obtained by both detection methods upon decomposing the complex broadband transient optical spectra, suggesting this time scale is inherent and independent of morphology. These observations suggest that the CTSs in the studied material blends are mostly strongly bound, and that charge generation from these states is highly inefficient. We further rationalize our results by considering the impact of the processing on the morphology of the mixed donor and acceptor domains and discuss the potential consequences of the early charge dynamics on the performance of emerging nonfullerene photovoltaic devices. Our results demonstrate that careful choice of processing conditions enables enhanced exciton harvesting and suppression of GR by more than 3 orders of magnitude.
RESUMO
Azulene is a promising candidate for constructing optoelectronic materials. An effective strategy is presented to obtain high-performance conjugated polymers by incorporating 2,6-connected azulene units into the polymeric backbone, and two conjugated copolymers P(TBAzDI-TPD) and P(TBAzDI-TFB) were designed and synthesized based on this strategy. They are the first two examples for 2,6-connected azulene-based conjugated polymers and exhibit unipolar n-type transistor performance with an electron mobility of up to 0.42â cm2 V-1 s-1 , which is among the highest values for n-type polymeric semiconductors in bottom-gate top-contact organic field-effect transistors. Preliminary all-polymer solar cell devices with P(TBAzDI-TPD) as the electron acceptor and PTB7-Th as the electron donor display a power conversion efficiency of 1.82 %.
RESUMO
We report the synthesis of two new selenophene-containing ladder-type monomers, cyclopentadiselenophene (CPDS) and indacenodiselenophene (IDSe), via a 2-fold and 4-fold Pd-catalyzed coupling with a 1,1-diborylmethane derivative. Copolymers with benzothiadiazole were prepared in high yield by Suzuki polymerization to afford materials which exhibited excellent solubility in a range of nonchlorinated solvents. The CPDS copolymer exhibited a band gap of just 1.18 eV, which is among the lowest reported for donor-acceptor polymers. Thin-film transistors were fabricated using environmentally benign, nonchlorinated solvents, with the CPDS and IDSe copolymers exhibiting hole mobility up to 0.15 and 6.4 cm2 V-1 s-1, respectively. This high performance was achieved without the undesirable peak in mobility often observed at low gate voltages due to parasitic contact resistance.
RESUMO
We report that the inclusion of nonaromatic 5,5-dimethylcyclopentadiene monomer into a conjugated backbone is an attractive strategy to high performance semiconducting polymers. The use of this monomer enables a room temperature Suzuki copolymerization with a diketopyrrolopyrrole comonomer to afford a highly soluble, high molecular weight material. The resulting low band gap polymer exhibits excellent photo and thermal stability, and despite a large π-π stacking distance of 4.26 Å, it demonstrates excellent performance in thin-film transistor devices.
RESUMO
An analysis program for near-edge X-ray absorption fine-structure (NEXAFS) spectra has been developed and implemented at the soft X-ray beamline of the Australian Synchrotron. The program allows for instant viewing of corrected data channels including normalizations to a standard, double normalizations when the standard itself has an undesired spectral response, and background subtraction. The program performs simple compositional analysis and peak fitting and includes rapid common calculations such as the average tilt angle of molecules with respect to the surface, and the determination of the complex index of refraction, which previously required intensive manual analysis. These functionalities make common manipulations carried out with NEXAFS data quick and straightforward as spectra are collected, greatly increasing the efficiency and overall throughput of NEXAFS experiments.
RESUMO
Herein it is demonstrated that the high level of interchain ordering of pEDOT is not necessary for the polymer to have efficient charge transport. Resistance and order are compared during the manufacturing process, where the polymerisation step and ordering step are decoupled as separate stages of the processing. GIWAXS experiments measuring interchain order are correlated to resistivity measurements at multiple stages of the manufacturing process on single films, and it is shown that for an individual film, where percolation is achieved, having a long range ordered system offers no reduction in resistance compared to having a highly disordered state of the same film. For this system, once the chains of pEDOT are formed, it is experimentally demonstrated that for percolation to be achieved, a remarkably low 4.5% volume fraction pEDOT is required. The apparent lack of necessity for significant interchain ordering allows for a meaningful measurement of development of the charge transport during the chemical polymerisation process.
RESUMO
We report two strategies toward the synthesis of 3-alkyl-4-fluorothiophenes containing straight (hexyl and octyl) and branched (2-ethylhexyl) alkyl groups. We demonstrate that treatment of the dibrominated monomer with 1 equiv of alkyl Grignard reagent leads to the formation of a single regioisomer as a result of the pronounced directing effect of the fluorine group. Polymerization of the resulting species affords highly regioregular poly(3-alkyl-4-fluoro)thiophenes. Comparison of their properties to those of the analogous non-fluorinated polymers shows that backbone fluorination leads to an increase in the polymer ionization potential without a significant change in optical band gap. Fluorination also results in an enhanced tendency to aggregate in solution, which is ascribed to a more co-planar backbone on the basis of Raman and DFT calculations. Average charge carrier mobilities in field-effect transistors are found to increase by up to a factor of 5 for the fluorinated polymers.
RESUMO
Quinoidal oligothiophenes (QOT), as classical n-type semiconductors, have been well-known for a long time but with non-optimal semiconducting properties. We report here the design and selective synthesis of new two-dimensional (2D) π-expanded quinoidal terthiophenes, 2DQTTs, with proximal (2DQTT-i) and distal (2DQTT-o) regiochemistry for high-performance n-channel organic thin-film transistors (n-OTFTs) featuring high electron mobility, solution processability, and ambient stability. The elegant combination of thieno[3,4-b]thiophene [TT, donor (D)] and 5-alkyl-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione [TPD, acceptor (A)] units with relatively large π-surface endows these 2DQTTs with distinctive 2D structural characteristics and flat configuration stabilized by weak intramolecular S-O/S weak interactions. Furthermore, the A-D-A-D-A electronic structure maintains an adequately low LUMO energy level. These 2DQTTs are shown to exhibit outstanding semiconducting properties with electron mobilities of up to 3.0 cm(2) V(-1) s(-1) and on/off ratios of up to 10(6) (2DQTT-o) in ambient- and solution-processed OTFTs. Investigations on thin-film morphology reveal that the microstructure of 2DQTTs is highly dependent on the orientation of the fused thiophene subunits, leading to differences in electron mobilities of 1 order of magnitude. X-ray diffraction studies in particular reveal increased crystallinity, crystalline coherence, and orientational order in 2DQTT-o compared to 2DQTT-i, which accounts for the superior electron transport property of 2DQTT-o.
RESUMO
A key consideration for the efficient operation of hybrid solar cells based upon conjugated polymers and inorganic semiconductor nanocrystals is charge transport in the nanocrystal phase. Here we report the results of a study into the charge transport kinetics of polymer/nanocrystal solar cells based on blends poly(3-hexylthiophene) (P3HT) with either CdSe nano-dots or CdSe nano-tetrapods. Transient photocurrent measurements reveal significant differences in the charge transport kinetics of nano-dot and nano-tetrapod hybrid cells, with the charge collection of the P3HT/CdSe nano-dot device severely limited by charge trapping. In comparison the nano-tetrapod cell exhibits significantly reduced charge trapping compared to the nano-dot cell accounting for the improved fill-factor and overall device efficiency. Transient photovoltage measurements have also been employed that demonstrate slower recombination rates in the P3HT/CdSe tetrapod device compared to the P3HT/CdSe dot device. These observations directly identify nanoparticle shape as a critical factor influencing the charge transport and hence recombination in this benchmark hybrid system, confirming the hypothesis that the use of tetrapods improves device performance through an improvement in electron transport in the nanocrystal phase.
RESUMO
Near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy is an important tool for probing the structure of conjugated polymer films used in organic electronic devices. High-performance conjugated polymers are often donor-acceptor co-polymers which feature a repeat unit with multiple functional groups. To facilitate better application of NEXAFS spectroscopy to the study of such materials, improved understanding of the observed NEXAFS spectral features is required. In order to examine how the NEXAFS spectrum of a donor-acceptor co-polymer relates to the properties of the sub-units, a series of naphthalene diimide-thiophene-based co-polymers have been studied where the nature and length of the donor co-monomer has been systematically varied. The spectra of these materials are compared with that of a thiophene homopolymer and naphthalene diimide monomer enabling peak assignment and the influence of inter-unit electronic coupling to be assessed. We find that while it is possible to attribute peaks within the π* manifold as arising primarily due to the naphthalene diimide or thiophene sub-units, very similar dichroism of these peaks is observed indicating that it may not be possible to separately probe the molecular orientation of the separate sub-units with carbon K-edge NEXAFS spectroscopy.
RESUMO
The aggregation-induced emission (AIE) properties of a systematic series of naphthalene diimides (NDIs) varying the chain length at the imide positions have been studied. A solvophobic collapse of NDI units through the flash injection of THF NDI solutions in sonicating water triggers the formation of stable suspensions with enhanced fluorescence emissions. Shorter chains favor the π-π stacking of NDI units through H-aggregation producing a strong AIE effect showing remarkably high quantum yields that have not been observed for non core-substitued NDIs previously. On the other hand, NDIs functionalized with longer chains lead to more disordered domains where π-π stacking between NDI units is mainly given by J-aggregation unfavoring the AIE effect.