PeakForce Tapping resolves individual microvilli on living cells.

Microvilli are a common structure found on epithelial cells that increase the apical surface thus enhancing the transmembrane transport capacity and also serve as one of the cell's mechanosensors. These structures are composed of microfilaments and cytoplasm, covered by plasma membrane. Epithelial cell function is usually coupled to the density of microvilli and its individual size illustrated by diseases, in which microvilli degradation causes malabsorption and diarrhea. Atomic force microscopy (AFM) has been widely used to study the topography and morphology of living cells. Visualizing soft and flexible structures such as microvilli on the apical surface of a live cell has been very challenging because the native microvilli structures are displaced and deformed by the interaction with the probe. PeakForce Tapping® is an AFM imaging mode, which allows reducing tip-sample interactions in time (microseconds) and controlling force in the low pico-Newton range. Data acquisition of this mode was optimized by using a newly developed PeakForce QNM-Live Cell probe, having a short cantilever with a 17-µm-long tip that minimizes hydrodynamic effects between the cantilever and the sample surface. In this paper, we have demonstrated for the first time the visualization of the microvilli on living kidney cells with AFM using PeakForce Tapping. The structures observed display a force dependence representing either the whole microvilli or just the tips of the microvilli layer. Together, PeakForce Tapping allows force control in the low pico-Newton range and enables the visualization of very soft and flexible structures on living cells under physiological conditions.

Multiparametric imaging of biological systems by force-distance curve-based AFM.

A current challenge in the life sciences is to understand how biological systems change their structural, biophysical and chemical properties to adjust functionality. Addressing this issue has been severely hampered by the lack of methods capable of imaging biosystems at high resolution while simultaneously mapping their multiple properties. Recent developments in force-distance (FD) curve-based atomic force microscopy (AFM) now enable researchers to combine (sub)molecular imaging with quantitative mapping of physical, chemical and biological interactions. Here we discuss the principles and applications of advanced FD-based AFM tools for the quantitative multiparametric characterization of complex cellular and biomolecular systems under physiological conditions.

The fuzzy coat of pathological human Tau fibrils is a two-layered polyelectrolyte brush.

The structure and properties of amyloid-like Tau fibrils accumulating in neurodegenerative diseases have been debated for decades. Although the core of Tau fibrils assembles from short ß-strands, the properties of the much longer unstructured Tau domains protruding from the fibril core remain largely obscure. Applying immunogold transmission EM, and force-volume atomic force microscopy (AFM), we imaged human Tau fibrils at high resolution and simultaneously mapped their mechanical and adhesive properties. Tau fibrils showed a ≈ 16-nm-thick fuzzy coat that resembles a two-layered polyelectrolyte brush, which is formed by the unstructured short C-terminal and long N-terminal Tau domains. The mechanical and adhesive properties of the fuzzy coat are modulated by electrolytes and pH, and thus by the cellular environment. These unique properties of the fuzzy coat help in understanding how Tau fibrils disturb cellular interactions and accumulate in neurofibrillary tangles.

Wiring of redox enzymes on three dimensional self-assembled molecular scaffold.

The integration of biological molecules and nanoscale components provides a fertile basis for the construction of hybrid materials of synergic properties and functions. Stable protein 1 (SP1), a highly stable ring shaped protein, was recently used to display different functional domains, to bind nanoparticles (NPs), and to spontaneously form two and three-dimensional structures. Here we show an approach to wire redox enzymes on this self-assembled protein-nanoparticle hybrid. Those hybrids are genetically engineered SP1s, displaying glucose oxidase (GOx) enzymes tethered to the protein inner pore. Moreover, the Au-NP-protein hybrids self-assembled to multiple enzymatic layers on the surface. By wiring the redox enzymes to the electrode, we present an active structure for the bioelectrocatalytic oxidation of glucose. This system demonstrates for the first time a three-dimensional assembly of multiple catalytic modules on a protein scaffold with an efficient electrical wiring of the enzyme units on an electrode surface, thus implementing a hybrid electrically active unit for nanobioelectronic applications.

Nanomechanical properties of proteins and membranes depend on loading rate and electrostatic interactions.

Knowing the dynamic mechanical response of tissue, cells, membranes, proteins, nucleic acids, and carbohydrates to external perturbations is important to understand various biological and biotechnological problems. Atomic force microscopy (AFM)-based approaches are the most frequently used nanotechnologies to determine the mechanical properties of biological samples that range in size from microscopic to (sub)nanoscopic. However, the dynamic nature of biomechanical properties has barely been addressed by AFM imaging. In this work, we characterizethe viscoelastic properties of the native light-driven proton pump bacteriorhodopsin of the purple membrane of Halobacterium salinarum. Using force-distance curve (F-D)-based AFM we imaged purple membranes while force probing their mechanical response over a wide range of loading rates (from ∼0.5 to 100 µN/s). Our results show that the mechanical stiffness of protein and membrane increases with the loading rate up to a factor of 10 (from ∼0.3 to 3.2 N/m). In addition, the electrostatic repulsion between AFM tip and sample can alter the mechanical stiffness measured by AFM up to ∼60% (from ∼0.8 to 1.3 N/m).These findings indicate that the mechanical response of membranes and proteins and probably of other biomolecular systems should be determined at different loading rates to fully understand their properties.

Logic implementations using a single nanoparticle-protein hybrid.

A Set-Reset machine is the simplest logic circuit with a built-in memory. Its output is a (nonlinear) function of the input and of the state stored in the machine's memory. Here, we report a nanoscale Set-Reset machine operating at room temperature that is based on a 5-nm silicon nanoparticle attached to the inner pore of a stable circular protein. The nanoparticle-protein hybrid can also function as a balanced ternary multiplier. Conductive atomic force microscopy is used to implement the logic input and output operations, and the processing of the logic Set and Reset operations relies on the finite capacitance of the nanoparticle provided by the good electrical isolation given by the protein, thus enabling stability of the logic device states. We show that the machine can be cycled, such that in every successive cycle, the previous state in the memory is retained as the present state. The energy cost of one cycle of computation is minimized to the cost of charging this state.

Float and compress: honeycomb-like array of a highly stable protein scaffold.

Organizing nano-objects, proteins in particular, on surfaces is one of the primary goals of bio/chemical nanotechnology. A highly stable protein scaffold (6His-SP1) was organized into a hexagonal 2D array by a new, versatile method. The protein was expelled from solution into the air/water interface and compressed in a Langmuir trough into a closely packed monolayer without the use of phospholipids or other surfactants at the interface. The 2D arrays formed at the air/water interface were characterized by transmission electron microscopy (TEM) and atomic force microscopy (AFM).

SP1 protein-based nanostructures and arrays.

Controlled formation of complex nanostructures is one of the main goals of nanoscience and nanotechnology. Stable Protein 1 (SP1) is a boiling-stable ring protein complex, 11 nm in diameter, which self-assembles from 12 identical monomers. SP1 can be utilized to form large ordered arrays; it can be easily modified by genetic engineering to produce various mutants; it is also capable of binding gold nanoparticles (GNPs) and thus forming protein-GNP chains made of alternating SP1s and GNPs. We report the formation and the protocols leading to the formation of those nanostructures and their characterization by transmission electron microscopy, atomic force microscopy, and electrostatic force microscopy. Further control over the GNP interdistances within the protein-GNP chains may lead to the formation of nanowires and structures that may be useful for nanoelectronics.