Intramolecular rhodium-catalysed [2 + 2 + 2] cycloaddition of linear chiral N-bridged triynes: straightforward access to fused tetrahydroisoquinoline core.

A route for the preparation of merged symmetrical tetrahydroisoquinolines with central chirality through a rhodium-catalyzed intramolecular [2 + 2 + 2] cycloaddition involving enantiopure triynes as substrates is described. The results show that linear triynes lacking a 3-atom tether can undergo efficient cyclisation. The N-tethered 1,7,13-triynes used in our approach were easily prepared from readily accessible chiral homopropargyl amides, the basic building blocks in our approach, which were efficiently obtained by diastereoselective addition of propargyl magnesium bromide to Ellman imines. Additional substitution at the benzene rings could be attained when substituted triynes at the terminal triple bonds were employed, giving access to more complex tetrahydroisoquinolines after the rhodium-catalyzed intramolecular [2 + 2 + 2] cycloaddition. Among the different transition-metal catalysts, the Wilkinson complex (RhCl(PPh3)3) afforded higher yields in the cyclisation of linear triynes; however, triynes bearing a Br substituent at the terminal positions underwent the cyclisation more efficiently in the presence of [RhCl(CO)2]2.

Pauson-Khand reaction of fluorinated compounds.

The Pauson-Khand reaction (PKR) is one of the key methods for the construction of cyclopentenone derivatives, which can in turn undergo diverse chemical transformations to yield more complex biologically active molecules. Despite the increasing availability of fluorinated building blocks and methodologies to incorporate fluorine in compounds with biological interest, there have been few significant advances focused on the fluoro-Pauson-Khand reaction, both in the inter- and intramolecular versions. Furthermore, the use of vinyl fluorides as olefinic counterparts had been completely overlooked. In this review, we collect the advances both on the stoichiometric and catalytic intermolecular and intramolecular fluoro-Pauson-Khand reaction, with special attention to the PKR of enynes containing a fluoride moiety.

Fluorine-Containing Drugs Approved by the FDA in 2018.

Over the last two decades, fluorine substitution has become one of the essential structural traits in modern pharmaceuticals. Thus, about half of the most successful drugs (blockbuster drugs) contain fluorine atoms. In this review, we profile 17 fluorine-containing drugs approved by the food and drug administration (FDA) in 2018. The newly approved pharmaceuticals feature several types of aromatic F and CF3 , as well as aliphatic (CF2 ) substitution, offering advances in the treatment of various diseases, including cancer, HIV, malarial and smallpox infections.

Competitive gold-activation modes in terminal alkynes: an experimental and mechanistic study.

The competition between π- and dual σ,π-gold-activation modes is revealed in the gold(I)-catalyzed heterocyclization of 1-(o-ethynylaryl)urea. A noticeable effect of various ligands in gold complexes on the choice of these activation modes is described. The cationic [Au(IPr)](+) (IPr=2,6-bis(diisopropylphenyl)imidazol-2-ylidene) complex cleanly promotes the π activation of terminal alkynes, whereas [Au(PtBu3 )](+) favors intermediate σ,π species. In this experimental and mechanistic study, which includes kinetic and cross-over experiments, several σ-gold, σ,π-gold, and other gold polynuclear reaction intermediates have been isolated and identified by NMR spectroscopy, X-ray diffraction, or MALDI spectrometry. The ligand control in the simultaneous or alternative π- and σ,π-activation modes is also supported by deuterium-labeling experiments.

FeCl3·6H2O-catalyzed Mukaiyama-aldol type reactions of enolizable aldehydes and acetals.

Mukaiyama-aldol type reactions of acetals derived from enolizable aldehydes with FeCl3·6H2O, an eco-friendly, low-cost, and stable catalyst, lead to ß-methoxycarbonyl compounds with nearly quantitative yields. The methodology is extended to the parent aldehydes as starting materials, leading to the corresponding aldols with lower yields, but efficiently. Different alkyl and aryl substituted acetals and aldehydes have been tested in the reaction with linear and cyclic silyl enol ethers. Reactions are carried out in an open air atmosphere, and additives are not required. Acetals can be considered activating groups of the carbonyl moiety rather than a protecting group in this type of FeCl3·6H2O-catalyzed condensation.

Switchable palladium-catalyst reaction of bromomethyl sulfoxides, CO, and N-nucleophiles: aminocarbonylation at Csp3 versus oxidative carbonylation of amines.

The palladium-catalyzed reaction of α-bromomethyl sulfoxides, carbon monoxide, and N-nucleophiles follows different reaction pathways according to the catalytic system and the reaction conditions. The Pd-xantphos catalyst affords high yields of α-sulfinyl amides by an aminocarbonylation process and is the first example of this type of transformation for a nonbenzylic sp(3)-hybridized carbon. On the other hand, the oxidative carbonylation of amines occurs with α-bromomethyl sulfoxides, carbon monoxide, and catalytic Pd(PPh(3))(4) under aerobic conditions, yielding ureas and oxalamides from either primary or secondary amines. The reaction with ambident nucleophiles such as amino alcohols was highly selective and took place exclusively at the amino group despite the presence of the alcohol functionality. In parallel to the reaction paths for simple amines, amino alcohols were converted into hydroxy sulfinyl amides when the reaction was catalyzed by Pd-xantphos, while Pd(PPh(3))(4) catalyst afforded cyclic carbamates. The alkoxycarbonylation reaction of bromomethyl sulfoxides with simple alcohols and CO leading to the corresponding sulfinyl esters is also described.

Diastereoselectivity of the Addition of Propargylic Magnesium Reagents to Fluorinated Aromatic Sulfinyl Imines.

The addition of propargylmagnesium bromide to fluorinated aromatic sulfinyl imines gave homopropargyl amines with total regio- and diastereoselection. Complete reversal of diastereoselectivity can be achieved in some cases using coordinating (THF) or noncoordinating (DCM) solvents. Substituted propargylic magnesium reagents have been also tested toward fluorinated aryl sulfinyl imines affording chiral homoallenyl amines with good yields and selectivity control. DFT calculations helped to rationalize the origin of the experimental regio- and diastereoselectivities observed in each case.

Competitive and selective Csp3-Br versus Csp2-Br bond activation in palladium-catalysed Suzuki cross-coupling: an experimental and theoretical study of the role of phosphine ligands.

Phosphine ligands have been demonstrated to have an effect on reactivity and selectivity in the competitive intramolecular palladium-catalysed Suzuki-Miyaura coupling of dibromo sulfoxide 1a possessing two different hybridised electrophilic carbons. It was found that the bromine bond to the sp(3)-hybridised carbon is selectively replaced in the presence of unhindered phosphines such as PPh(3) or xantphos. The use of hindered phosphine ligands such as P(o-tol)(3) and P(1-naphthyl)(3) reversed the selectivity, conducting the cross-coupling at the Csp(2)-Br. Identical trends were observed in external competition experiments carried out with bromomethyl sulfoxide and different substituted bromoarenes. DFT and DFT/MM calculations showed that the selectivity observed is mainly due to the different facility of the ligands to dissociate. Bisphosphine catalysts favour coupling at the sp(3) carbon, whereas monophosphine catalysts prefer the sp(2) carbon.

Osmium(III) complexes with POP pincer ligands: preparation from commercially available OsCl(3)·3H(2)O and their X-ray structures.

Complexes OsCl(3){dbf(P(i)Pr(2))(2)} [1; dbf(P(i)Pr(2))(2) = 4,6-bis(diisopropylphosphino)dibenzofuran], OsCl(3){xant(P(i)Pr(2))(2)} [2; xant(P(i)Pr(2))(2) = 9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene], and OsCl(3){xant(PPh(2))(2)} [3; xant(PPh(2))(2) = 9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene] have been obtained in high yield by the reaction of the corresponding diphosphine with OsCl(3)·3H(2)O. The ruthenium(III) counterparts RuCl(3){dbf(P(i)Pr(2))(2)} (4), RuCl(3){xant(P(i)Pr(2))(2)} (5), and RuCl(3){xant(PPh(2))(2)} (6) are similarly obtained from RuCl(3)·3H(2)O in moderate yields. The X-ray structures of dbf(P(i)Pr(2))(2) and complexes 1-3 are also reported.

Why is the Suzuki-Miyaura cross-coupling of sp3 carbons in alpha-bromo sulfoxide systems fast and stereoselective? A DFT study on the mechanism.

The stereoselectivity-determining oxidative addition step in the Suzuki-Miyaura cross-coupling of alpha-bromo sulfoxides is analyzed computationally through DFT calculations on a model system defined by Pd(PMe(3))(2) and CH(3)SOCH(2)Br. Both monophospine and bisphosphine complexes have been considered, different reaction pathways being characterized through location of the corresponding transition states. The lowest energy transition states correspond to nucleophilic substitution mechanisms, which imply inversion of configuration at the carbon, in good agreement with experimental data on the process. The energy-lowering and stereodirecting role of the sulfinyl substituent is explained through its attractive interactions with the palladium center, which are only possible in the most favored mechanisms.

Vinyl Fluorides: Competent Olefinic Counterparts in the Intramolecular Pauson-Khand Reaction.

Despite the great advances achieved in the Pauson-Khand reaction and the ever-increasing demand for fluorinated compounds, the use of vinyl fluorides as olefinic counterparts in the above-mentioned transformation had been completely overlooked. Herein, we describe, for the first time, the intramolecular Pauson-Khand reaction of enynes containing a vinyl fluoride moiety.

The Fluoro-Pauson-Khand Reaction in the Synthesis of Enantioenriched Nitrogenated Bicycles Bearing a Quaternary C-F Stereogenic Center.

A variety of enantioenriched fluorinated 6H-cyclopenta[c]pyridin-6-one bicycles, a scaffold present in several classes of monoterpenic alkaloids with varied biological activity, were synthesized in just five steps from simple aldehyde starting materials. The synthesis presented wide functional group tolerance and moderate to high yields and diastereoselectivities and could be carried out on a gram scale. These products were suitable for further transformations, such as hydrogenation and deprotection of the tert-butylsulfonyl protecting group.

First synthesis of beta-keto sulfoxides by a palladium-catalyzed carbonylative Suzuki reaction.

[reaction: see text] An unprecedented palladium-catalyzed three-component cross-coupling reaction between alpha-bromo sulfoxide, carbon monoxide, and aromatic boronic acids provides a new and efficient approach to the synthesis of beta-ketosulfoxides. The reaction takes place under mild conditions with a wide range of variously substituted aryl and heteroaryl boronic acids. The carbonylative cross-coupling reaction is strongly favored over competing direct cross-coupling and homocoupling processes, except with boronic acids carrying strong electron-withdrawing substituents.

Gold(I)-catalysed cascade reactions in the synthesis of 2,3-fused indole derivatives.

A gold(I)-catalysed hydroaminative/arylative cascade for the efficient synthesis of a variety of indole-fused skeletons has been developed. Factors controlling the catalyst loading required in these transformations involving 1,3-unsubstituted indole intermediates have been revealed, allowing isolation of an unprecedented 1,3-dimetallated 3H-indole gold complex characterized by X-ray diffraction.

Unprecedented palladium-catalyzed cross-coupling reaction of alpha-bromo sulfoxides with boronic acids.

[reaction: see text] A new Suzuki-type palladium-catalyzed reaction of boronic acids with alpha-bromo sulfoxides has been developed using a protocol similar to the well-documented reaction of boronic acids with aryl halides. Both cross-coupling and homocoupling processes were observed. The best yields in cross-coupling products were obtained when the presence of oxygen was carefully excluded using degassed solvents. The oxidative addition palladium complex intermediate could be isolated and characterized by X-ray single-crystal diffraction.

NHC-stabilized gold(I) complexes: suitable catalysts for 6-exo-dig heterocyclization of 1-(o-ethynylaryl)ureas.

3-Substituted 1-(o-ethynylaryl)ureas 1 selectively undergo either 6-exo-dig or 5-endo-dig cyclization (to give 4-methylene-3,4-quinazolin-2-ones 2 or indoles 3, respectively) depending on the choice of the metal, ligand, and reaction conditions. The best results (up to 96% yield) in the preparation of the hydroamination products 2 are achieved with the highly bulky NHC-stabilized cationic gold(I) complex [Au(IPr)](+). Conversely, ureas bearing an internal alkyne lead to the 5-endo-dig cyclization mode regardless of the gold(I) complex employed. Whereas the nature of the substituent at N-3 does not have any influence on the regiochemistry observed, it does, in some cases, affect the efficiency of these transformations.

Gold(I)-catalyzed intermolecular oxyarylation of alkynes: unexpected regiochemistry in the alkylation of arenes.

The reaction between acetylenes and sulfoxides, studied as a test case for gold-catalyzed intermolecular addition, provides the oxyarylation compounds 3 in good yields. Unpredictably, in all cases a single regioisomer arising from the electrophilic aromatic alkylation at the position adjacent to the sulfur atom is obtained instead of the expected Friedel-Crafts regioisomer. A new concerted mechanism based on DFT calculations is proposed to account for the products in this intermolecular gold(I)-catalyzed reaction.

Water compatible gold(III)-catalysed synthesis of unsymmetrical ethers from alcohols.

An efficient and broad-scoped method for the preparation of unsymmetrical ethers from alcohols catalysed by the simplest and least expensive gold catalyst, NaAuCl(4), is described for the first time. The procedure enables the etherification of benzylic and tertiary alcohols with moderate to good yields under mild conditions with low catalyst loading. Symmetrical ethers, the usual side products in the etherification of alcohols, were not detected in this case. The formation of the racemic ether from a chiral benzyl alcohol suggests the intermediacy of a carbocation, which has not previously been postulated for gold-catalysed reactions involving alcohols.

Palladium-catalyzed Suzuki-Miyaura reaction involving a secondary sp3 carbon: studies of stereochemistry and scope of the reaction.

Palladium-catalyzed C--C bond formation involving secondary sp3-hybridized carbon is described. These reactions occur with secondary 1-bromoethyl arylsulfoxides and different arylboronic acids, to produce the corresponding arylated sulfoxides in moderate to high yields and with complete stereospecificity. Despite the presence of beta hydrogens in the substrate, the competitive beta-hydride elimination is not a significant side reaction when coordinating solvents are used. The reported cross-coupling involves secondary C(sp3)--C(sp2) bond formation: this is the first time that a mechanistic study has been carried out with such substrates. The reaction proceeds with inversion of configuration at the stereogenic C(sp3) carbon. The high stereospecificity of the coupling and the mildness of the reaction conditions allow for the preservation of the optical purities of reagents and products and the preparation of useful chiral targets.

Palladium-catalyzed reaction of boronic acids with chiral and racemic alpha-bromo sulfoxides.

Palladium-catalyzed cross-coupling reactions of racemic alpha-bromo sulfoxides with boronic acids are carried out in either aqueous or nonaqueous medium with formation of a new C sp(3)-C sp(2) bond. The arylation of chiral alpha-bromo sulfoxides occurs without racemization. The cross-coupling reaction is general and gives high yields with arylboronic acids substituted with either donor or acceptor groups but gives poor results with heteroarylboronic acids. The best yields are obtained using degassed solvents and CsF instead of aqueous base. The use of aqueous base and the presence of oxygen favor the homocoupling side reaction.