RESUMO
Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.
RESUMO
Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (VO ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO2 surface and NiOx nanocluster possess two modes of VO different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal VO significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and VO in TiO2 drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from VO in NiOx to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal VO catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.
Assuntos
Oxigênio , Água , Amônia , Catálise , Ligação de Hidrogênio , Oxigênio/químicaRESUMO
Electrochemical reduction of oxygen plays a critical role in emerging electrochemical energy technologies. Multiple electron transfer processes, involving adsorption and activation of O2 and generation of protons from water molecules, cause the sluggish kinetics of the oxygen reduction reaction (ORR). Herein, a double-active-site catalyst of Fe3 C nanoparticles coupled to paulownia wood-derived N-doped carbon (Fe3 C@NPW) is fabricated via an active-site-uniting strategy. One site on Fe3 C nanoparticles contributes to activating water molecules, while another site on N-doped carbon is responsible for activating oxygen molecules. Benefiting from the synergistic effect of double active sites, Fe3 C@NPW delivers a remarkable catalytic activity for ORR with a half-wave potential of 0.87 V (vs. RHE) in alkaline electrolyte, outperforming commercial Pt/C catalyst. Moreover, zinc-air batteries (ZABs) assembled with Fe3 C@NPW as a catalyst on cathode achieve a large specific capacity of 804.4 mA h gZn-1 and a long-term stability of 780 cycles. The model solid-state ZABs also display satisfactory performances with an open-circuit voltage of 1.39 V and a high peak power density of 78 mW cm-2 . These outstanding performances reach the level of first-rank among the non-noble metal electrode materials. This work offers a promising approach to creating double-active-site catalysts by the active-site-uniting strategy for energy conversion fields.
Assuntos
Carbono , Nanopartículas , Eletrodos , Hipóxia , Oxigênio , Água , Madeira , ZincoRESUMO
The rational design of the interface structure between nitride and oxide using the same metallic element and correlating the interfacial active center with a determined catalytic mechanism remain challenging. Herein, a Co4 N-Co3 O4 interface structure is designed to determine the effect of interfacial active centers on hydrogen generation from ammonia borane. An unparalleled catalytic activity toward H2 production with a turnover frequency up to 79 min-1 is achieved on Co4 N-Co3 O4 @C catalyst for ten recycles. Experimental analyses and theoretical simulation suggest that the atomic interface-exciting effect (AieE) is responsible for the high catalytic activity. The Co4 N-Co3 O4 interface facilitates the targeted adsorption and activation of NH3 BH3 and H2 O molecules to generate H* and H2 . The two active centers of Co(N)* and Co(O)* at the Co4 N-Co3 O4 interface activate NH3 BH3 and H2 O, respectively. This proof-of-concept research on AieE provides important insights regarding the design of heterogeneous catalysts and promotes the development of the nature and regulation of energy chemical conversion.
Assuntos
Cobalto , Óxidos , Amônia , Catálise , Cobalto/química , Hidrogênio/química , Óxidos/químicaRESUMO
Zinc-air batteries (ZABs) are promising as energy storage devices owing to their high energy density and the safety of electrolytes. Construction of abundant triple-phase boundary (TPB) effectively facilitates cathode reactions occurring at TPB. Herein, a wood-derived integral air electrode containing Co/CoO nanoparticles and nitrogen-doped carbonized wood (Co/CoO@NWC) is constructed with a dual catalytic function. The potential gap between oxygen reduction and evolution is shortened to 0.77 V. Liquid ZABs using Co/CoO@NWC as cathode exhibit high discharge specific capacity (800 mAh gZn-1 ), low charge-discharge gap (0.84 V), and long-term cycling stability (270 h). Co/CoO@NWC also shows distinguished catalytic activity and stability in all-solid-state ZABs. The inherent layered porous and pipe structures of wood are well maintained in catalytically active carbon. The different hydrophilicity of carbonized wood and Co/CoO endow abundant TPBs for battery reaction. The Co/CoO located on TPB provides main active sites for oxygen reactions. The inherent pipe structures of wood carbon and the interaction between Co/CoO and NWC effectively prevent nanoparticles from aggregation. The design and preparation of this monolithic electrocatalyst contribute to the broad-scale application of ZABs and promote the development of next-generation biomass-based storage devices.
Assuntos
Madeira , Zinco , Carbono , Fontes de Energia Elétrica , EletrodosRESUMO
Metal-organic frameworks (MOFs) are an eminent addition to materials science research because of their versatile properties due to which their applications are wide spread in proteomics. They are used in various fields due to their characteristics like higher surface area, specific symmetry, ease of modification, and availability of a variety of ligands. As affinity sorbents, they have shown higher selectivity, sensitivity, and reproducibility than conventionally used materials. They are applied for the enrichment of phosphopeptides, glycopeptides, low mass peptides, and as laser desorption/ionization (LDI) matrices for small-molecule analysis. This review captures the insight of applying MOFs in the field of mass spectrometry-based proteomics. The specific features are discussed regarding MOFs as affinity sorbents for the selective capture of biological molecules like phosphopeptides and glycopeptides from complex samples. The potential of MOFs as LDI mass spectrometry (LDI-MS) matrices for small-molecule analysis is also evaluated. MOFs have also been used as enzymatic reactors for the digestion of proteins, prior to MS analysis. MOF-based affinity materials and bioreactors reduce proteome complexity and improve detection sensitivity and coverage. Size-exclusion effects of MOFs help in subtracting the abundant proteins in peptidomics. Several limitations of MOFs are addressed, which include stability under varying pH conditions, the unclear interaction mechanism between the MOFs and targeted analytes, and the non-specific binding that interferes during the analysis because of metal centers and ligands in the MOFs. This will open up MOF-based research to overcome the limitations and improve the performance of MOFs as selective and sensitive materials. Graphical abstract á .
Assuntos
Estruturas Metalorgânicas , Proteômica , LigantesRESUMO
One challenge facing the development of air electrodes for Zn-air batteries (ZABs) is the embedment of active sites into carbon, which requires cracks and blends between powder and membrane and results in low energy efficiency during manufacturing and utilization. Herein, a surface phosphorization-monolithic strategy is proposed to embed CoO nanoparticles into paulownia carbon plate (P-CoO@PWC) as monolithic electrodes. Benefiting from the retention of natural transport channels, P-CoO@PWC-2 is conducive to the construction of three-phase interface structure for efficient mass transfer and high electrical conductivity. The electrode exhibits remarkable catalytic activities for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with a small overpotential gap (EOER - EORR = 0.68 V). Density functional theory calculations reveal that the incorporation of P on P-CoO@PWC-2 surface adjusts the electronic structure to promote the dissociation of water and the activation of oxygen, thus inducing catalytic activity. The monolithic P-CoO@PWC-2 electrode for quasi-solid-state or aqueous ZABs has excellent specific power, low charge-discharge voltage gap (0.83 V), and long-term cycling stability (over 700 cycles). This work serves as a new avenue for transforming abundant biomass into high-value energy-related engineering products.