RESUMO
The efficacy of photodynamic therapy (PDT) strictly depends on the availability of molecular oxygen to trigger the light-induced generation of reactive species. Fluorocarbons have an increased ability to dissolve oxygen and are attractive tools for gas delivery. We synthesized three fluorous derivatives of chlorin with peripheral polyfluoroalkyl substituents. These compounds were used as precursors for preparing nanoemulsions with perfluorodecalin as an oxygen depot. Therefore, our formulations contained hydrophobic photosensitizers capable of absorbing monochromatic light in the long wavelength region and the oxygen carrier. These modifications did not alter the photosensitizing characteristics of chlorin such as the generation of singlet oxygen, the major cytocidal species in PDT. Emulsions readily entered HCT116 colon carcinoma cells and accumulated largely in mitochondria. Illumination of cells loaded with emulsions rapidly caused peroxidation of lipids and the loss of the plasma membrane integrity (photonecrosis). Most importantly, in PDT settings, emulsions potently sensitized cells cultured under prolonged (8 weeks) hypoxia as well as cells after oxygen depletion with sodium sulfite (acute hypoxia). The photodamaging potency of emulsions in hypoxia was significantly more pronounced compared to emulsion-free counterparts. Considering a negligible dark cytotoxicity, our materials emerge as efficient and biocompatible instruments for PDT-assisted eradication of hypoxic cells.
Assuntos
Fluorocarbonos , Fotoquimioterapia , Porfirinas , Humanos , Fármacos Fotossensibilizantes/química , Porfirinas/química , Fluorocarbonos/farmacologia , Hipóxia/metabolismo , Oxigênio , Emulsões/química , Linhagem Celular TumoralRESUMO
In the last decade, there has been continuous competition between two methods for detecting the concentration of dissolved oxygen: amerometric (Clark electrode) and optical (quenching of the phosphorescence of the porphyrin metal complex). Each of them has obvious advantages and disadvantages. This competition is especially acute in the development of biosensors, however, an unbiased comparison is extremely difficult to achieve, since only a single detection method is used in each particular study. In this work, a microfluidic system with synchronous detection of the oxygen concentration by two methods was created for the purpose of direct comparison. The receptor element is represented by Saccharomyces cerevisiae yeast cells adsorbed on a composite material, previously developed by our scientific group. To our knowledge, this is the first work of this kind in which the comparison of the oxygen detection methods is carried out directly.
Assuntos
Técnicas Biossensoriais , Porfirinas , Técnicas Biossensoriais/métodos , Eletrodos , Dispositivos Lab-On-A-Chip , OxigênioRESUMO
Polymer composites with various recycled poly(ethylene terephthalate)-based (PET-based) polyester matrices (poly(ethylene terephthalate), copolyesters, and unsaturated polyester resins), similar in properties to the primary ones, can be obtained based on PET glycolysis products after purification. PET glycolysis allows one to obtain bis(2-hydroxyethyl) terephthalate and oligo(ethylene terephthalates) with various molecular weights. A kinetic model of poly(ethylene terephthalate) homogeneous glycolysis under the combined or separate action of oligo(ethylene terephthalates), bis(2-hydroxyethyl) terephthalate, and ethylene glycol is proposed. The model takes into account the interaction of bound, terminal, and free ethylene glycol molecules in the PET feedstock and the glycolysis agent. Experimental data were obtained on the molecular weight distribution of poly(ethylene terephthalate) glycolysis products and the content of bis(2-hydroxyethyl) terephthalate monomer in them to verify the model. Homogeneous glycolysis of PET was carried out at atmospheric pressure in dimethyl sulfoxide (DMSO) and N-methyl-2-pyrrolidone (NMP) solvents with catalyst based on antimony trioxide (Sb2O3) under the action of different agents: ethylene glycol at temperatures of 165 and 180 °C; bis(2-hydroxyethyl) terephthalate at 250 °C; and oligoethylene terephthalate with polycondensation degree 3 at 250 °C. Homogeneous step-by-step glycolysis under the successive action of the oligo(ethylene terephthalate) trimer, bis(2-hydroxyethyl) terephthalate, and ethylene glycol at temperatures of 250, 220, and 190 °C, respectively, was also studied. The composition of products was confirmed using FTIR spectroscopy. Molecular weight characteristics were determined using gel permeation chromatography (GPC), the content of bis(2-hydroxyethyl) terephthalate was determined via extraction with water at 60 °C. The developed kinetic model was found to be in agreement with the experimental data and it could be used further to predict the optimal conditions for homogeneous PET glycolysis and to obtain polymer-based composite materials with desired properties.
RESUMO
Electropolymerized thionine was used as a redox-active polymer to create a two-mediated microbial biosensor for determining biochemical oxygen demand (BOD). The electrochemical characteristics of the conducting system were studied by cyclic voltammetry and electrochemical impedance spectroscopy. It has been shown that the most promising in terms of the rate of interaction with the yeast B. adeninivorans is the system based on poly(thionine), single-walled carbon nanotubes (SWCNT), and neutral red (kint = 0.071 dm3/(g·s)). The biosensor based on this system is characterized by high sensitivity (the lower limit of determined BOD concentrations is 0.4 mgO2/dm3). Sample analysis by means of the developed analytical system showed that the results of the standard dilution method and those using the biosensor differed insignificantly. Thus, for the first time, the fundamental possibility of effectively using nanocomposite materials based on SWCNT and the redox-active polymer poly(thionine) as one of the components of two-mediator systems for electron transfer from yeast microorganisms to the electrode has been shown. It opens up prospects for creating stable and highly sensitive electrochemical systems based on eukaryotes.
RESUMO
The use of biocidal agents is a common practice for protection against biofouling in biomass-rich environments. In this paper, oligohexamethyleneguanidine (OHMG) polymer, known for its biocidal properties, was further modified with para-aminosalicylic acid (PAS) to enhance its properties against microorganisms coated with a lipid membrane. The structure of the product was confirmed by 1H NMR, 13C NMR, and FTIR spectroscopy. The values of the minimum inhibitory concentration (MIC) against Mycobacterium smegmatis ATCC 607 and Pseudomonas chlororaphis 449 were found to be 1.40 and 1.05 µg/mL, respectively. The synthesized substance was used as an additive to the polymer matrix of the composite optical oxygen sensor material. A series of samples with different contents of OHMG-PAS was prepared using a co-dissolution method implying the fabrication of a coating from a solution containing both polymers. It turned out that the mutual influence of the components significantly affects the distribution of the indicator in the matrix, surface morphology, and contact angle. The optimal polymer content turned out to be wt.3%, at which point the water contact angle reaches almost 122°, and the fouling rate decreases by almost five times, which is confirmed by both the respiratory MTT assay and confocal microscopy with staining. This opens up prospects for creating stable and biofouling-resistant sensor elements for use in air tanks or seawater.
RESUMO
The development of different methods for tuning surface properties is currently of great interest. The presented work is devoted to the use of modified nanodiamonds to control the wetting and biological fouling of polymers using optical sensors as an example. We have shown that, depending on the type of modification and the amount of nanodiamonds, the surface of the same fluorinated polymer can have both bactericidal properties and, on the contrary, good adhesion to the biomaterial. The precise control of wetting and biofouling properties of the surface was achieved by the optimization of the modified nanodiamonds thermal anchoring conditions. In vitro and in vivo tests have shown that the fixation of amine functional groups leads to inhibition of biological activity, while the presence of a large number of polar groups of mixed composition (amide and acid chloride) promotes adhesion of the biomaterial and allows one to create a biosensor on-site. A comprehensive study made it possible to establish that in the first 5 days the observed biosensor response is provided by cells adhered to the surface due to the cell wall interaction. On the 7th day, the cells are fixed by means of the polysaccharide matrix, which provides much better retention on the surface and a noticeably greater response to substrate injections. Nevertheless, it is important to note that even 1.5 h of incubation is sufficient for the formation of the reliable bioreceptor on the surface with the modified nanodiamonds. The approach demonstrated in this work makes it possible to easily and quickly isolate the microbiome on the surface of the sensor and perform the necessary studies of its substrate specificity or resistance to toxic effects.