RESUMO
BACKGROUND: Assessment of growth-related or treatment-related changes in the maxilla requires a reliable method of superimposition. Such methods are well established for two-dimensional (2D) cephalometric images but not yet for three-dimensions (3D). The aims of this study were to identify natural reference structures (NRS) for the maxilla in growing patients in 3D, opportunistically using orthodontic mini-screws as reference; and to test the applicability of the proposed NRS for maxillary superimposition by assessing the concordance of this approach with Björk's 'stable reference structures' in lateral projection. METHODS: The stability of the mini-screws was tested on longitudinal pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images by measuring the distance changes between screws. After verifying the stability of the mini-screws, rigid registration was performed for aligning the stable mini-screws. Then, non-rigid registration was used to establish the dense voxel-correspondence among CBCT images and calculate the displacement of each voxel belonging to the maxilla relative to the mini-screws. The displacement vectors were transformed to a standardized maxillary template to categorize the stability of the internal structures statistically. Those voxels that displaced less relative to the mini-screws were considered as the natural reference structures (NRS) for the maxilla. Test samples included another dataset of longitudinal CBCT scans. They were used to evaluate the applicability of the proposed NRS for maxillary superimposition. We assessed whether aligning the maxilla with proposed NRS is in concordance with the maxillary internal reference structures superimposition in the traditional 2D lateral view as suggested by Björk. This was quantitively assessed by comparing the mean sagittal and vertical tooth movements for both superimposition methods. RESULTS: The stability of the mini-screws was tested on 10 pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images (T1: 12.9 ± 0.8 yrs, T2: 14.8 ± 0.7 yrs). Both the loaded and the unloaded mini-screws were shown to be stable during orthodontic treatment, which indicates that they can be used as reference points. By analyzing the deformation map of the maxilla, we confirmed that the infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm distal to incisor foramen except the palatal suture) were stable during growth. Another dataset of longitudinal CBCT scans (T1: 12.2 ± 0.63 yrs, T2: 15.2 ± 0.96 yrs) was used to assess the concordance of this approach with Björk's 'stable reference structures'. The movement of the maxillary first molar and central incisor showed no statistically significant difference when superimposing the test images with the proposed NRS or with the classic Björk maxillary superimposition in the lateral view. CONCLUSIONS: The infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm posterior to incisal foramen except the palatal suture) were identified as stable regions in the maxilla. These stable structures can be used for maxillary superimposition in 3D and generate comparable results to Björk superimposition in the lateral view.
Assuntos
Maxila , Palato Duro , Humanos , Maxila/diagnóstico por imagem , Cefalometria , Tomografia Computadorizada de Feixe Cônico , Assistência OdontológicaRESUMO
AIMS: To explore the involvement of NOD-like receptor protein 3 (NLRP3) inflammasome and M1 macrophage in root resorption (RR). METHODS: A rat RR model was established by excessive orthodontic force. After different force-loading time, the expression levels of NLRP3, caspase-1, and interleukin-1ß (IL-1ß) and distribution of M1 macrophages were analysed by immunohistochemistry and immunofluorescence staining in vivo. Then, the mechanism of NLRP3 activation was further verified by macrophage and human periodontal ligament cell (hPDLC) co-culture system in vitro. The production levels of NLRP3, caspase-1, pro-caspase-1, and IL-1ß in M1 macrophages in the co-culture system were detected by Western blot, and the polarization of CD68+IL-1ß+ M1 macrophages was detected by immunofluorescence staining. RESULTS: In the rat RR model, NLRP3, caspase-1, IL-1ß, and M1 macrophages were expressed in periodontal ligament, mainly concentrated around RR areas. Force-pre-treated hPDLCs promoted M1 macrophage polarization and the production of NLRP3, caspase-1, and IL-1ß in M1 macrophages in co-culture system. When MCC950, an inhibitor of NLRP3 inflammasome, was added, NLRP3 activation and M1 macrophage polarization were inhibited. CONCLUSIONS: In periodontal tissues, hPDLCs stimulated by force promoted M1 macrophage polarization and increased IL-1ß production by activating NLRP3 inflammasome in M1 macrophages, thus initiating the occurrence of RR.
Assuntos
Inflamassomos , Interleucina-1beta , Proteína 3 que Contém Domínio de Pirina da Família NLR , Reabsorção da Raiz , Animais , Humanos , Interleucina-1beta/metabolismo , Macrófagos , Proteínas NLR , RatosRESUMO
BACKGROUND: Orthodontic treatment for patients with dentinogenesis imperfecta (DGI) can be risky because of the fragility of their dental hard tissue. Although the Invisalign (Align Technology) clear aligner system should be a suitable orthodontic appliance for patients with DGI, to the authors' knowledge, there has been no related research. CASE DESCRIPTION: A 28-year-old woman with DGI sought treatment with a 1 mm open bite, edge-to-edge occlusion of the central incisors, and a bilateral Class III cusp-to-cusp molar relationship. Invisalign was applied for her treatment, and after 3 and one-half years of orthodontic therapy, a normal overjet and overbite were achieved, accompanied by retraction of the lower lip as well as a bilateral Class I molar relationship. In addition, there was no iatrogenic injury to the patient's teeth. PRACTICAL IMPLICATIONS: The Invisalign system may be a suitable orthodontic appliance for patients with DGI because clear aligners lessen the tensile stress to the teeth, decrease the number and area of bonds to the teeth, and offer protective effects through a full wrap of plastic that covers the crowns of the teeth.
Assuntos
Dentinogênese Imperfeita , Humanos , Feminino , Adulto , Dentinogênese Imperfeita/terapia , Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária/instrumentação , Técnicas de Movimentação Dentária/métodos , Ortodontia Corretiva/métodos , Ortodontia Corretiva/instrumentação , Desenho de Aparelho OrtodônticoRESUMO
Advanced periodontitis poses a significant threat to oral health, causing extensive damage and loss of both hard and soft periodontal tissues. While traditional therapies such as scaling and root planing can effectively halt the disease's progression, they often fail to fully restore the original architecture and function of periodontal tissues due to the limited capacity for spontaneous regeneration. To address this challenge, periodontal tissue engineering has emerged as a promising approach. This technology centers on the utilization of biomaterial scaffolds, which function as three-dimensional (3D) templates or frameworks, supporting and guiding the regeneration of periodontal tissues, including the periodontal ligament, cementum, alveolar bone, and gingival tissue. These scaffolds mimic the extracellular matrix (ECM) of native periodontal tissues, aiming to foster cell attachment, proliferation, differentiation, and, ultimately, the formation of new, functional periodontal structures. Despite the inherent challenges associated with preclinical testing, the intensification of research on biomaterial scaffolds, coupled with the continuous advancement of fabrication technology, leads us to anticipate a significant expansion in their application for periodontal tissue regeneration. This review comprehensively covers the recent advancements in biomaterial scaffolds engineered specifically for periodontal tissue regeneration, aiming to provide insights into the current state of the field and potential directions for future research.
RESUMO
OBJECTIVE: Exosomes have been shown to play a strong role in intercellular communication. While GMSCs have been extensively studied, less research exists on exosomes derived from GMSCs, especially on how exosomes affect macrophages. This study aimed to investigate the impact of GMSC-derived exosomes on macrophage polarization and phenotype under inflammatory conditions. METHODS: Exosomes were isolated from GMSCs-conditioned media by ultracentrifugation (UC) and characterized by transmission electron microscopy (TEM), nanoparticle tracking analysis (NTA) and western blot (WB). In vitro, GMSC-derived exosomes were co-incubated with macrophages for 24â¯h in the absence or presence of M1 polarizing conditions in the six-well plate. The protein and mRNA expression levels of M1 and M2 macrophage markers were detected and the supernatants were collected for an enzyme-linked immunosorbent assay (ELISA). RESULTS: Exosomes were successfully isolated from GMSCs. Macrophages co-cultured with exosomes showed significantly decreased levels of the M1 markers Tumor Necrosis Factor-α (TNF-α), Interleukin-12 (IL-12), CD86 and Interleukin-1ß (IL-1ß). By contrast, M2 marker Interleukin-10 (IL-10) levels moderately increased. Meanwhile, similar results were acquired in the cell culture supernatants. CONCLUSION: GMSC-derived exosomes may promote M1 macrophage transformation into M2 macrophages, reducing the pro-inflammatory factors produced by M1 macrophages.