The conservation of allelic DNA methylation and its relationship with imprinting in maize.

Genomic imprinting refers to allele-specific expression of genes depending on parental origin, and it is regulated by epigenetic modifications. Intraspecific allelic variation for imprinting has been detected; however, the intraspecific genome-wide allelic epigenetic variation in maize and its correlation with imprinting variants remain unclear. Here, three reciprocal hybrids were generated by crossing Zea mays inbred lines CAU5, B73, and Mo17 in order to examine the intraspecific conservation of the imprinted genes in the kernel. The majority of imprinted genes exhibited intraspecific conservation, and these genes also exhibited interspecific conservation (rice, sorghum, and Arabidopsis) and were enriched in some specific pathways. By comparing intraspecific allelic DNA methylation in the endosperm, we found that nearly 15% of DNA methylation existed as allelic variants. The intraspecific whole-genome correlation between DNA methylation and imprinted genes indicated that DNA methylation variants play an important role in imprinting variants. Disruption of two conserved imprinted genes using CRISPR/Cas9 editing resulted in a smaller kernel phenotype. Our results shed light on the intraspecific correlation of DNA methylation variants and variation for imprinting in maize, and show that imprinted genes play an important role in kernel development.

Transcriptome-wide identification and characterization of genes exhibit allele-specific imprinting in maize embryo and endosperm.

BACKGROUND: Genomic imprinting refers to a subset of genes that are expressed from only one parental allele during seed development in plants. Studies on genomic imprinting have revealed that intraspecific variations in genomic imprinting expression exist in naturally genetic varieties. However, there have been few studies on the functional analysis of allele-specific imprinted genes. RESULTS: Here, we generated three reciprocal crosses among the B73, Mo17 and CAU5 inbred lines. Based on the transcriptome-wide analysis of allele-specific expression using RNA sequencing technology, 305 allele-specific imprinting genes (ASIGs) were identified in embryos, and 655 ASIGs were identified in endosperms from three maize F1 hybrids. Of these ASIGs, most did not show consistent maternal or paternal bias between the same tissue from different hybrids or different tissues from one hybrid cross. By gene ontology (GO) analysis, five and eight categories of GO exhibited significantly higher functional enrichments for ASIGs identified in embryo and endosperm, respectively. These functional categories indicated that ASIGs are involved in intercellular nutrient transport, signaling pathways, and transcriptional regulation of kernel development. Finally, the mutation and overexpression of one ASIG (Zm305) affected the length and width of the kernel. CONCLUSION: In this study, our data will be helpful in gaining further knowledge of genes exhibiting allele-specific imprinting patterns in seeds. The gain- and loss-of-function phenotypes of ASIGs associated with agronomically important seed traits provide compelling evidence for ASIGs as crucial targets to optimize seed traits in crop plants.

Ectopic Expression of the Transcriptional Regulator silky3 Causes Pleiotropic Meristem and Sex Determination Defects in Maize Inflorescences.

Maize (Zea mays) is a monoecious plant, in which inflorescence morphogenesis involves complicated molecular regulatory mechanisms. Although many related genes have been cloned, our understanding of the molecular mechanism underlying maize inflorescence development remains limited. Here, we identified a maize semi-dominant mutant Silky3 (Si3), which displays pleiotropic defects during inflorescence development, including loss of determinacy and identity in meristems and floral organs, as well as the sexual transformation of tassel florets. We cloned the si3 gene using a map-based approach. Functional analysis reveals that SI3 is a nuclear protein and may act as a transcriptional regulator. Transcriptome analysis reveals that the ectopic expression of si3 strongly represses multiple biological processes, especially the flower development pathways. RNA in situ hybridization similarly shows that the expression patterns of genes responsible for flower development are changed in the Si3 mutant. In addition, the homeostasis of jasmonic acid and gibberellic acid are altered in the Si3 young tassels, and application of exogenous jasmonic acid can rescue the sex reversal phenotype of Si3 The defects we characterized in various regulatory pathways can explain the complex phenotypes of Si3 mutant, and this study deepens our knowledge of maize inflorescence development.

Metal Augments Used in Revision Hip Arthroplasty: A Systematic Review and Single-Arm Meta-Analysis.

BACKGROUND: Porous metal augments are used in complex hip arthroplasty; however, few studies have assessed their efficacy and safety. This systematic review analyzed the use of augments in revision hip arthroplasty and summarized the clinical research findings. METHODS: We used combinations of "revision," "replacement," "arthroplasty," "augment," "acetabular," and "hip" to search PubMed, Web of Science, EMBASE, Cochrane Library databases, and clinical trial registration platform "Clinicaltrials" for relevant literature. The functional score, restoration of hip center of rotation, revision of implants, and complications were analyzed. Patients were divided into 3 subgroups according to the mean follow-up period. Overall, 19 reports involving 647 patients (655 hips) were selected. The mean age at the time of surgery was 63 years (range, 24-106) and the mean follow-up duration was 66 months (range, 11-204). RESULTS: Harris Hip Score increased from approximately a mean of 40 points preoperatively to a mean of 84 points postoperatively. The vertical distance between hip center of rotation and teardrop was restored from a preoperative distance of 41.9 to 21.7 mm postoperatively. The overall acetabular revision rate was 4.7%, and the incidence of complications was 8.2%. There were significant differences in the reoperation, acetabular revision, and complication rates among the subgroups. CONCLUSION: Metal augments used in revision hip arthroplasty are a safe and effective treatment option to correct acetabular defects.

Characterization of Genes That Exhibit Genotype-Dependent Allele-Specific Expression and Its Implications for the Development of Maize Kernel.

Heterosis or hybrid vigor refers to the superior phenotypic traits of hybrids relative to their parental inbred lines. An imbalance between the expression levels of two parental alleles in the F1 hybrid has been suggested as a mechanism of heterosis. Here, based on genome-wide allele-specific expression analysis using RNA sequencing technology, 1689 genes exhibiting genotype-dependent allele-specific expression (genotype-dependent ASEGs) were identified in the embryos, and 1390 genotype-dependent ASEGs in the endosperm, of three maize F1 hybrids. Of these ASEGs, most were consistent in different tissues from one hybrid cross, but nearly 50% showed allele-specific expression from some genotypes but not others. These genotype-dependent ASEGs were mostly enriched in metabolic pathways of substances and energy, including the tricarboxylic acid cycle, aerobic respiration, and energy derivation by oxidation of organic compounds and ADP binding. Mutation and overexpression of one ASEG affected kernel size, which indicates that these genotype-dependent ASEGs may make important contributions to kernel development. Finally, the allele-specific methylation pattern on genotype-dependent ASEGs indicated that DNA methylation plays a potential role in the regulation of allelic expression for some ASEGs. In this study, a detailed analysis of genotype-dependent ASEGs in the embryo and endosperm of three different maize F1 hybrids will provide an index of genes for future research on the genetic and molecular mechanism of heterosis.

The Resistance of Maize to Ustilago maydis Infection Is Correlated with the Degree of Methyl Esterification of Pectin in the Cell Wall.

Common smut caused by Ustilago maydis is one of the dominant fungal diseases in plants. The resistance mechanism to U. maydis infection involving alterations in the cell wall is poorly studied. In this study, the resistant single segment substitution line (SSSL) R445 and its susceptible recurrent parent line Ye478 of maize were infected with U. maydis, and the changes in cell wall components and structure were studied at 0, 2, 4, 8, and 12 days postinfection. In R445 and Ye478, the contents of cellulose, hemicellulose, pectin, and lignin increased by varying degrees, and pectin methylesterase (PME) activity increased. The changes in hemicellulose and pectin in the cell wall after U. maydis infection were analyzed via immunolabeling using monoclonal antibodies against hemicellulsic xylans and high/low-methylated pectin. U. maydis infection altered methyl esterification of pectin, and the degree of methyl esterification was correlated with the resistance of maize to U. maydis. Furthermore, the relationship between methyl esterification of pectin and host resistance was validated using 15 maize inbred lines with different resistance levels. The results revealed that cell wall components, particularly pectin, were important factors affecting the colonization and propagation of U. maydis in maize, and methyl esterification of pectin played a role in the resistance of maize to U. maydis infection.

BSA-Seq and Transcriptomic Analysis Provide Candidate Genes Associated with Inflorescence Architecture and Kernel Orientation by Phytohormone Homeostasis in Maize.

The developmental plasticity of the maize inflorescence depends on meristems, which directly affect reproductive potential and yield. However, the molecular roles of upper floral meristem (UFM) and lower floral meristem (LFM) in inflorescence and kernel development have not been fully elucidated. In this study, we characterized the reversed kernel1 (rk1) novel mutant, which contains kernels with giant embryos but shows normal vegetative growth like the wild type (WT). Total RNA was extracted from the inflorescence at three stages for transcriptomic analysis. A total of 250.16-Gb clean reads were generated, and 26,248 unigenes were assembled and annotated. Gene ontology analyses of differentially expressed genes (DEGs) detected in the sexual organ formation stage revealed that cell differentiation, organ development, phytohormonal responses and carbohydrate metabolism were enriched. The DEGs associated with the regulation of phytohormone levels and signaling were mainly expressed, including auxin (IAA), jasmonic acid (JA), gibberellins (GA), and abscisic acid (ABA). The transcriptome, hormone evaluation and immunohistochemistry observation revealed that phytohormone homeostasis were affected in rk1. BSA-Seq and transcriptomic analysis also provide candidate genes to regulate UFM and LFM development. These results provide novel insights for understanding the regulatory mechanism of UFM and LFM development in maize and other plants.

Conservation Study of Imprinted Genes in Maize Triparental Heterozygotic Kernels.

Genomic imprinting is a classic epigenetic phenomenon related to the uniparental expression of genes. Imprinting variability exists in seeds and can contribute to observed parent-of-origin effects on seed development. Here, we conducted allelic expression of the embryo and endosperm from four crosses at 11 days after pollination (DAP). First, the F1 progeny of B73(♀) × Mo17(♂) and the inducer line CAU5 were used as parents to obtain reciprocal crosses of BM-C/C-BM. Additionally, the F1 progeny of Mo17(♀) × B73(♂) and CAU5 were used as parents to obtain reciprocal crosses of MB-C/C-MB. In total, 192 and 181 imprinted genes were identified in the BM-C/C-BM and MB-C/C-MB crosses, respectively. Then, by comparing the allelic expression of these imprinted genes in the reciprocal crosses of B73 and CAU5 (BC/CB), fifty-one Mo17-added non-conserved genes were identified as exhibiting imprinting variability. Fifty-one B73-added non-conserved genes were also identified by comparing the allelic expression of imprinted genes identified in BM-C/C-BM, MB-C/C-MB and MC/CM crosses. Specific Gene Ontology (GO) terms were not enriched in B73-added/Mo17-added non-conserved genes. Interestingly, the imprinting status of these genes was less conserved across other species. The cis-element distribution, tissue expression and subcellular location were similar between the B73-added/Mo17-added conserved and B73-added/Mo17-added non-conserved imprinted genes. Finally, genotypic and phenotypic analysis of one non-conserved gene showed that the mutation and overexpression of this gene may affect embryo and kernel size, which indicates that these non-conserved genes may also play an important role in kernel development. The findings of this study will be helpful for elucidating the imprinting mechanism of genes involved in maize kernel development.

Haploid induction and its application in maize breeding.

Maize is a heterosis-utilizing crop species, and the application of maize hybrids has significantly improved total maize yields worldwide. Breeding pure lines is the most important part of heterosis utilization. The double haploid (DH) breeding technology is the approach rising recently in breeding pure lines; compared to the conventional recurrent-selfing method, it can significantly accelerate the crop breeding process. Similar to molecular breeding and transgenic techniques, maize DH breeding has been playing an increasingly important role in commercial breeding and is becoming the core technique in modern maize breeding. In this review, we summarize recent progress in maize DH breeding and put forth our opinions on the future development of double haploid techniques in modern maize breeding.

Sequential gene activation and gene imprinting during early embryo development in maize.

Gene imprinting is a widely observed epigenetic phenomenon in maize endosperm; however, whether it also occurs in the maize embryo remains controversial. Here, we used high-throughput RNA sequencing on laser capture microdissected and manually dissected maize embryos from reciprocal crosses between inbred lines B73 and Mo17 at six time points (3-13 days after pollination, DAP) to analyze allelic gene expression patterns. Co-expression analysis revealed sequential gene activation during maize embryo development. Gene imprinting was observed in maize embryos, and a greater number of imprinted genes were identified at early embryo stages. Sixty-four strongly imprinted genes were identified (at the threshold of 9:1) on manually dissected embryos 5-13 DAP (more imprinted genes at 5 DAP). Forty-one strongly imprinted genes were identified from laser capture microdissected embryos at 3 and 5 DAP (more imprinted genes at 3 DAP). Furthermore, of the 56 genes that were completely imprinted (at the threshold of 99:1), 36 were not previously identified as imprinted genes in endosperm or embryos. In situ hybridization demonstrated that most of the imprinted genes were expressed abundantly in maize embryonic tissue. Our results shed lights on early maize embryo development and provide evidence to support that gene imprinting occurs in maize embryos.

Karyotypes and Distribution of Tandem Repeat Sequences in Brassica nigra Determined by Fluorescence in situ Hybridization.

Whole-genome shotgun reads were analyzed to determine the repeat sequence composition in the genome of black mustard, Brassica nigra (L.) Koch. The analysis showed that satellite DNA sequences are very abundant in the black mustard genome. The distribution pattern of 7 new tandem repeats (BnSAT13, BnSAT28, BnSAT68, BnSAT76, BnSAT114, BnSAT180, and BnSAT200) on black mustard chromosomes was visualized using fluorescence in situ hybridization (FISH). The FISH signals of BnSAT13 and BnSAT76 provided useful cytogenetic markers; their position and fluorescence intensity allowed for unambiguous identification of all 8 somatic metaphase chromosomes. A karyotype showing the location and fluorescence intensity of these tandem repeat sequences together with the position of rDNAs and centromeric retrotransposons of Brassica (CRB) was constructed. The establishment of the FISH-based karyotype in B. nigra provides valuable information that can be used in detailed analyses of B. nigra accessions and derived allopolyploid Brassica species containing the B genome.

Effect of micro-arc oxidation surface modification of 3D-printed porous titanium alloys on biological properties.

Background: Three-dimensional (3D) printing technology has been widely used in orthopedics; however, it is still limited to the change of macroscopic structures. In order to further improve the biological properties of 3D-printed porous titanium scaffolds, this study introduced micro-arc oxidation (MAO) technology to modify the surface of porous titanium scaffolds and construct bioactive coatings on the surface of porous titanium scaffolds to improve the biocompatibility and osseointegration ability of the material. Methods: For in vitro experiments, human bone marrow stem cells (hBMSCs) were seeded onto untreated scaffolds (control group) and MAO-treated scaffolds (experimental group). After 24 h of co-culture, cytotoxicity was observed using live/dead staining, and cell/scaffold constructs were retrieved and processed for the assessment of cell morphology by using scanning electron microscopy (SEM). Cell proliferation was detected using the Cell Counting Kit-8 (CCK-8) assay after 3, 7, and 14 days of co-culture. The levels of alkaline phosphatase (ALP) in the cell supernatant were detected after 7 and 14 days of co-culture. For in vivo experiments, micro-computed tomography (micro-CT) and Masson Goldner's staining were used to evaluate bone ingrowth and osseointegration at 4 and 8 weeks postoperatively. Results: In vitro experiment results confirmed that the two groups of scaffolds were non-cytotoxic and the cell adhesion status on the MAO-treated scaffolds was better. Over time, cell proliferation and ALP levels were higher in the MAO-treated group than in the untreated scaffolds. In the in vivo experiments, the MAO-treated scaffolds showed better bone ingrowth and osseointegration than the untreated group at different time points. Conclusions: The MAO-treated porous titanium scaffold formed a uniform and dense bioactive coating on the surface, which was more conducive to cell adhesion, proliferation, and differentiation and showed better osseointegration and bone ingrowth in vivo.

Overexpression of Modified CENH3 in Maize Stock6-Derived Inducer Lines Can Effectively Improve Maternal Haploid Induction Rates.

Maize (Zea mays) doubled haploid (DH) breeding is a technology that can efficiently generate inbred lines with homozygous genetic backgrounds. Haploids are usually produced through in vivo induction by haploid inducer lines in maize. Currently, two approaches are usually used to develop maize haploid inducer lines. One is through the conventional breeding improvement based on the Stock6 germplasm, and this strategy is extensively used to induce maternal haploids in commercial maize DH breeding. Another strategy, newly developed but less utilized so far, is by genetic manipulation of the Centromeric Histone3 (CENH3) in regular lines. However, whether both approaches can be combined to develop the haploid inducer line with higher maternal haploid induction rate (HIR) has not been reported. In this study, we manipulated the Stock6-derived inducer lines by overexpressing maize CENH3 fused with different fluorescent protein tags and found that the engineered Stock6-derived lines showed an obvious increase in the maternal HIR. Intriguingly, this above strategy could be further improved by substituting a tail-altered CENH3 for the full-length CENH3 in the tagged expression cassette, resulting in a maternal HIR up to 16.3% that was increased by ~6.1% than Stock6-derived lines control. These results suggested that integration of two in vivo haploid induction methods could rapidly and effectively improve the maternal HIRs of maize Stock6-derived inducer lines, and provided a potentially feasible solution for further optimizing the process of commercial maize DH breeding.

Studies on the Manner of Collateral Regeneration From Nerve Stem to Motor Endplate.

Despite recent evidence suggesting that nerve transfer techniques help improve clinical outcomes, the underlying manner by which collateral-regenerated nerve enters skeletal muscles to restore an organized pattern of the neuromuscular junction (NMJ) is unclear. To construct the animal models of collateral regeneration, the proximal peroneal nerve was fixed to the distal tibial nerve stump. Three months after surgery, the spatial distribution of motor endplates (MEPs) and corresponding in-muscle nerve branches in long flexor digitorum muscles were observed with tissue optical clearing combined with light-sheet microscopy in transgenic fluorescent mice. The results showed that the number of fibers in the proximal donor peroneal nerve was 415 ± 11, while regenerated nerve fibers in the distal tibial stump were 781 ± 43, which indicates a collateral regeneration ratio of 1.88. The spatial distribution of MEPs was restored to an organized pattern of the lamella, and the corresponding in-muscle nerve branches reverted to the normal manner such as after collateral regeneration. Beyond this, the numbers of MEPs dominated by the single distal nerve fiber were 25.58 ± 0.50 and 26.42 ± 0.94, respectively (n = 6, p > 0.05, collateral regeneration group vs. normal group). However, the numbers of distal-regenerated nerve fibers were less than those in normal control groups (781 ± 43 vs. 914 ± 55, n = 6, p < 0.05), and the number and perforations of MEPs were lower than those in normal control groups as such. In summary, this is the first study to show the manner of collateral regeneration of the peripheral nerve that the smaller proximal donor nerve can sprout more axonal buds to connect distal larger nerves and finally restore to an organized pattern of lamella dominated by corresponding in-muscle nerve branches.

Photosynthetic and physiological responses to acetochlor in paired near-isogenic lines of waxy maize (Zea mays L.).

Acetochlor is always used in maize (Zea mays L.) fields as a common pre-emergence herbicide. In this field study, we investigated the effects of acetochlor on the photosynthetic characteristics, chlorophyll fluorescence parameters, and antioxidant enzyme activities in acetochlor-resistant (BWC95) and acetochlor-sensitive (BWC12) near-isogenic lines. We sprayed acetochlor after sowing, using water treatment as the control. After spraying acetochlor, the net photosynthetic rate, stomatal conductance, transpiration rate, and the function of chloroplasts were significantly lower in BWC12 than BWC95, whereas the intercellular CO2 concentrations and stomatal limitation values were higher. In addition to nonphotochemical quenching, chlorophyll fluorescence measurements obtained using leaves showed that the maximum photochemical efficiency of photosystem II (PSII), actual photochemical efficiency of PSII, photochemical quenching of chlorophyll fluorescence, and electron transport rate were higher in BWC95 than BWC12 after acetochlor treatment. H2O2 and O2˙- levels were higher in BWC12 than BWC95, which resulted in severe membrane lipid peroxidation due to sustained oxidative stress. Thus, the malondialdehyde content increased significantly with the exposure time in BWC12, and the antioxidant enzyme activities were lower in BWC12 than BWC95. The results show that acetochlor resistance is directly related to a high photosynthetic rate and a protective antioxidant enzyme system.

Single nucleus sequencing reveals spermatid chromosome fragmentation as a possible cause of maize haploid induction.

Production of maternal haploids using a conspecific haploid inducer is routine and highly efficient in maize. However, the underlying mechanism of haploid induction (HI) is unclear. We develop a method to isolate three nuclei from a pollen grain and four microspores from a tetrad for whole-genome sequencing. A high rate of aneuploidy is observed at the three-nucleus stage (6/22 pollens) rather than at the tetrad stage (1/72 microspores) in one HI line CAU5. Frequent aneuploidy is also observed in another two inducer lines, but not in two regular lines, which implies that HI may be associated with pollen aneuploidy. We further sequence the individual embryos and endosperms of 88 maize kernels crossing between regular and inducer lines. Genome-wide elimination of the CAU5-derived chromosome is identified in eight of 81 embryos. Together, these results suggest that continuous chromosome fragmentation occurring post meiosis in the gametophyte may cause haploidy of the embryo.