Diamond-Like Carbon Coating Reduces Connection Screw Head Stripping After Multiple Tightening Instances.

The stability of implant-abutment joint is fundamental for the long-term success of implant rehabilitation. The screw loosening, fracture, and head deformation are among the most common mechanical complications. Several surface treatments of titanium screws have been proposed to improve their resistance and stability. Diamond-like carbon (DLC) coating of the materials is widely used to increase their wear resistance and durability. The present study aimed to evaluate the effect of carbon fiber coating on the screw head on screw removal torque and screw head stripping. One hundred titanium implant screws were used, 50 without coating (Group 1) and 50 with DLC coating of the screw head (Group 2). Each screw was tightened with a torque of 25 Ncm and unscrewed 10 times. The removal torque was measured with a digital cap torque tester for each loosening. Optical 3d measurement of the screw head surface was performed by a fully automatic machine before and after multiple tightening to investigate surface modifications. The reverse torque values decreased with repeated tightening and loosening cycles in both groups without significant differences (P > .05). Optical measurements of surface dimensions revealed average changes of 0.0357 mm in Group 1 and 0.02312 mm in Group 2, which resulted to be statistically significant (P < .001). The DLC coating of the retention screw head can prevent its distortion and wear, especially after multiple tightening.

Effects of Removable Functional Appliances on the Dentoalveolar Unit in Growing Patients.

Background and Objectives: The objective of this retrospective controlled study is to compare class II growing patients who underwent treatment with two different functional appliances: the Fraenkel regulator (FR-2), utilized as the control group, and the elastodontic device "Cranium Occluded Postural Multifunctional Harmonizers" (AMCOP), utilized as the test group. Materials and Methods: The study sample consisted of 52 patients with class II division I malocclusion (30 males, 22 females, mean age 8.6 ± 1.4 years) who were treated with the two different types of appliances: Group 1 (n = 27, mean age 8 [7.00, 9.00] years, 12 females, 15 males) received treatment with AMCOP, while Group 2 (n = 25, mean age 9.2 years [8.20, 10.00], 10 females, 15 males) received treatment with FR-2. The mean treatment duration for Group 1 was 28.00 [21.50, 38.00] months, while for Group 2 it was 23.70 [17.80, 27.40] months. Cephalometric analyses were performed on lateral cephalograms taken before treatment (T1) and after treatment (T2). Results: Significant intragroup differences were observed over time in Group 1 for 1^/PP. Similarly, significant intragroup differences were observed over time in Group 2 for SNB, ANB, and IMPA. Conclusions: Both treatment modalities resulted in the correction of class II malocclusion with dentoalveolar compensation, although the treatment duration with AMCOP tended to be longer on average.

Influence of abutment macro- and micro-geometry on morphologic and morphometric features of peri-implant connective tissue.

OBJECTIVES: The aim of the present human observational study is to provide morphologic and morphometric analysis of peri-implant connective tissue next to abutments with divergent or convergent macro-geometry and different surface micro-characteristics. MATERIALS AND METHODS: Thirty patients were rehabilitated with single implants in the posterior area and one out of three different healing abutments with a one-stage technique: machined divergent abutment (DIV-MAC), machined convergent abutment (CONV-MAC) or convergent abutment with ultrathin threaded surface (CONV-UTM). At 3 months postimplant insertion, peri-implant soft tissue was harvested; the following outcomes were investigated: histomorphometry (vertical width of connective and epithelial components) as detected by histology and polarized light; and connective tissue vertical width and 3D organization as detected by synchrotron-based high-resolution phase-contrast-based tomography (PhC-µCT). RESULTS: Significant differences in connective tissue vertical dimension (aJE-AM) were found between DIV-MAC and both CONV-MAC and CONV-UTM, both by histology and PhC-µCT, with significantly higher values for the last two groups. Moreover, 2D histological analysis did not find significant differences in the junctional epithelium vertical dimension (PM-aJE). Importantly, PhC-µCT analysis revealed, at 3D level, significant greater amount and density of collagen bundles for CONV-UTM compared with the other two groups. CONCLUSIONS: Convergent abutment profiles, regardless of their surface micro-geometry, seem to favor axial development of peri-implant connective tissue. Moreover, ultrathin threaded surfaces seem associated with denser and greater connective tissue organization, which might improve peri-implant soft tissue seal.

Biomarkers from Peri-Implant Crevicular Fluid (PICF) as Predictors of Peri-Implant Bone Loss: A Systematic Review.

The aim of the present systematic review is to summarize current knowledge regarding the analysis of biomarkers extracted from peri-implant crevicular fluid (PICF) as predictors of peri-implant bone loss (BL). An electronic search was conducted on three databases, PubMed/MEDLINE, Cochrane Library, and Google Scholar, to find clinical trials published until 1 December 2022 suitable to answer the following focused question: in patients with dental implants, are biomarkers harvested from PICF predictive of peri-implant BL? The initial search yielded a total of 158 entries. After a full-text review and application of the eligibility criteria, the final selection consisted of nine articles. The risk of bias in included studies was assessed using the Joanna Briggs Institute Critical Appraisal tools (JBI). According to the present systematic review, some inflammatory biomarkers harvested from PICF (collagenase-2, collagenase-3, ALP, EA, gelatinase b, NTx, procalcitonin, IL-1ß, and several miRNAs) seem to be correlated with peri-implant BL and may assist in the early diagnosis of pathological BL, that characterizes peri-implantitis. MiRNA expression demonstrated a predictive potential of peri-implant BL that could be useful for host-targeted preventive and therapeutic purposes. PICF sampling may represent a promising, noninvasive, and repeatable form of liquid biopsy in implant dentistry.

Influence of implant diameter on implant survival rate and clinical outcomes in the posterior area: a systematic review and meta-analysis.

OBJECTIVE: The aim of the present systematic review was to test the hypothesis that the diameter of implants inserted in the posterior area affects implant survival rate, prosthetic survival rate and peri-implant parameters (bleeding on probing (BoP), marginal bone loss (MBL), pocket probing depth (PPD)). MATERIALS AND METHODS: An electronic search of studies published until December 2021 was done on three databases (Pubmed, Scopus, Cochrane) independently by two authors. Clinical trials comparing implant survival rate, BoP, MBL and PPD among narrow diameter implants (NDI: ≥ 3.0 mm to < 3.75 mm) and regular diameter implants (RDI ≥ 3.75 mm to < 5 mm) were included. Data were independently extracted by two reviewers. Risk of bias was evaluated according to the Cochrane risk-of-bias tool for randomized studies and to the Joanna Briggs Institute Critical Appraisal tools for non-randomized ones. A pair-wise meta-analysis was conducted on the included studies. RESULTS: Seven articles were included out of the 4291 identified from the digital research. Overall, a total of 939 implants were inserted (319 NDI, 620 RDI). Only one study was judged at serious risk of bias. No statistically significant difference was found in implant survival rate (risk ratio 1.01 (95% CI [0.98 to 1.04], P = 0.67)) while the difference was significant for BoP (mean difference 2.89 (95% CI [0.30 to 5.48] mm, P = 0.03)) with higher values for NDI. Higher MBL was identified among regular diameter implants (mean difference -0.15 mm (95% CI [-0.32 to 0.01 mm], P = 0.07). No statistically significant differences were identified for prosthetic survival and PPD. CONCLUSIONS: No differences were found in implant survival rate between narrow and regular implants. A higher BoP was identified among narrow implants, but there was no higher bone loss. It is not possible to draw definitive conclusions about the use of narrow-diameter implants in the posterior region.

Effect of argon plasma pre-treatment of healing abutments on peri-implant microbiome and soft tissue integration: a proof-of-concept randomized study.

PURPOSE: Biofilm-free implant surface is ultimate prerequisite for successful soft and bone tissue integration. Objective of the study was to estimate the effects of argon plasma healing abutment pre-treatment (PT) on peri-implant soft-tissue phenotype (PiSP), inflammation, plaque accumulation and the microbiome (PiM) between non-treated (NPT) and treated (PT) abutments following 3-months healing period. The hypothesis was that cell-conductive and antimicrobial properties of PT would yield optimal conditions for soft tissue integration. MATERIAL AND METHODS: Two months following second-phase surgery, microbiological and clinical parameters were assessed around thirty-six healing abutments with two types of microtopography, smooth surface (MACHINED) and ultrathin threaded microsurface (ROUGH). A two level randomization schema was used to achieve equal distribution and abutments were randomly divided into rough and machined groups, and then divided into PT and NPT groups. PiM was assessed using next-generation DNA sequencing. RESULTS: PiM bacterial composition was highly diverse already two months post-implantation, consisting of key-stone pathogens, early and late colonizers, while the mycobiome was less diverse. PT was associated with lower plaque accumulation and inflammation without significant impact on PiSP, while in NPT clinical parameters were increased and associated with periopathogens. NPT mostly harbored late colonizers, while PT exerted higher abundance of early colonizers suggesting less advanced plaque formation. Interaction analysis in PT demonstrated S. mitis co-occurrence with pro-healthy Rothia dentocariosa and co-exclusion with Parvimonas micra, Porphyromonas endodontalis and Prevotella oris. PiSP parameters were generally similar between the groups, but significant association between PiM and keratinized mucosa width was observed in both groups, with remarkably more expressed diversity in NPT compared to PT. PT resulted in significantly lower BOP and PI around rough and machined abutments, respectively, without specific effect on PiM and PiSP. CONCLUSIONS: PT contributed to significantly the less advanced biofilm accumulation and inflammation without specific effects on PiSP.

Evaluation of periodontal indices among non-smokers, tobacco, and e-cigarette smokers: a systematic review and network meta-analysis.

OBJECTIVES: The detrimental effect of tobacco smoking on periodontal health is well known, while the effect of electronic cigarette on periodontal parameters has been less investigated. The aim of the present systematic review was to compare periodontal indices in three categories of patients: traditional cigarette smokers (TS), e-cigarette smokers (ES), and non-smokers (NS). MATERIALS AND METHODS: An electronic search was conducted for studies published until December 2021 on MEDLINE (PubMed), ISI Web of Science, and Scopus. A hand search was additionally conducted. Clinical observational and cross-sectional trials investigating periodontal indices among tobacco smokers (TS), electronic cigarette smokers (ES) and non-smokers (NS) were included and selected by 2 independent reviewers. Data on probing depth (PD), plaque index (PI), and bleeding on probing (BOP) were collected. The risk of bias was evaluated according to the NIH quality assessment tool and a network meta-analysis (NMA) was undertaken. RESULTS: Five relevant studies, from 707 identified, were included. Overall, 512 patients were included, of them 170 were NS, 176 were TS, and 166 were ES. A significant difference in the comparison among TS vs NS: effect size (ES) = 3.297 (95%CI: [2.142-4.454], p = 0.001) and TS and ES ES = 2.507 (95%CI: [1.351-3.663], p = 0.001) was identified for PD. A significant difference in the comparison among TS and NS, ES = 21.34 (95%CI: [13.41-29.27], p = 0.001) and between TS and ES ES = 15.67 (95%CI: [7.73-23.62], p = 0.001) was identified for PI. The analysis of BOP values shows a significant difference in the comparison among ES and NS: ES = - 16.22 (95%CI: [- 22.85 to - 9.59], p < 0.001) and between TS and NS: ES = - 14.47 (95%CI: [- 21.103 to - 7.848], p < 0.001). Based on the SUCRA ranking, NS showed the most favorable outcome for PD and PI, followed by ES. Tobacco smokers were clearly in the last position. Dealing with BoP ES showed the most favorable outcome, followed by TS. NS were in the last position. CONCLUSIONS: Periodontal parameters were similar among NS and ES, while TS presented the worst indices. BoP was reduced both in ES and in TS. CLINICAL RELEVANCE: Results of the present review suggest a reduced effect on periodontal tissue of e-cig smoking compared to traditional cigarettes, despite recent studies proved that e-cig smoking increases oxidative stress, inflammatory responses, change in pulmonary cellular behavior, and stimulates DNA injury.

Tissue-level versus bone-level single implants in the anterior area rehabilitated with feather-edge crowns on conical implant abutments: An up to 5-year retrospective study.

STATEMENT OF PROBLEM: Limited information is available on the differences between tissue-level implants with an ultrathin threaded microsurface conical transmucosal portion and bone-level implants rehabilitated with conical custom abutments. PURPOSE: The purpose of this retrospective study was to assess the outcomes of crowns designed as per the biologically oriented preparation technique (BOPT) cemented on conical titanium abutments on tissue-level and bone-level implants. MATERIAL AND METHODS: Patients consecutively rehabilitated with a delayed loading protocol with anterior implant-supported single crowns with a feather-edge margin, in function for at least 4 years, were recruited and divided into 2 groups based on the implant type they had received: tissue-level implants with a conical transmucosal portion or bone-level implants rehabilitated with a conical abutment by following the platform switching concept. Bone resorption, pink esthetic score (PES), and white esthetic score (WES) were collected and analyzed. The nonparametric Mann-Whitney test was performed to analyze all parameters (α=.05 for all tests). RESULTS: A total of 43 participants (48 implants) were included in the present study. The mean follow-up period was 4.5 years (range 52-64 months). A statistically significant difference (P=.004) was found in the mean ±standard deviation bone resorption between tissue-level implants (0.38 ±0.46 mm) and bone-level implants (0.83 ±0.58 mm). Higher values for both PES and WES were obtained in the tissue-level implant group. CONCLUSIONS: Within the limitations of the present retrospective study, tissue-level implants with a conical transmucosal portion seem to provide a suitable alternative to bone-level implants in the anterior area.

Titanium abutment surface modifications and peri-implant tissue behavior: a systematic review and meta-analysis.

OBJECTIVES: To evaluate the effect of various titanium abutment modifications on the behaviour of peri-implant soft tissue healing, inflammation and maintenance. MATERIAL AND METHODS: An electronic database research until 30 April 2019 was performed. A meta-analysis (MA) for each outcome parameter was performed by using the random-effects models with the DerSimonian-Laird estimator. RESULTS: Ten studies were included in the present review. Four studies with a long follow-up (5-6 years) reported the outcomes in a heterogeneous way and were suitable for MA. Six studies (4 RCT, 2 CCT) including 118 patients and 182 implants dealing with a modified healing abutment surface and short follow-up were selected for MA. The MA for PI and BoP as outcome showed no significant differences between surfaces (PI: P = 0.091; BoP: P = 0.099). The MA for PD as outcome showed no significant differences between surfaces (P = 0.488). No statistical significance was found by evaluating each mixed-effects model for potential moderators (type of study, study design, number of implants, follow-up length). The other four studies with a longer follow-up (5-6 years) reported contradictory results depending on the surface treatment investigated. CONCLUSIONS: Within their limits, the present findings suggest that peri-implant soft tissue may not be affected by the surface treatment of titanium abutments on the short term. Contrasting results are reported in longer follow-up periods depending on the technique used to modify the abutment. CLINICAL RELEVANCE: Clinicians should carefully evaluate the use of a modified titanium surface in their practice. Even if no differences in terms of inflammation are present at short term, these findings need to be validated in long-term studies.

Clinical outcomes of using a prosthetic protocol to rehabilitate tissue-level implants with a convergent collar in the esthetic zone: A 3-year prospective study.

STATEMENT OF PROBLEM: Whether increasing the space for peri-implant soft tissues by using implant systems with conical or convergent transmucosal components would improve tissue stability and esthetics is unclear. PURPOSE: The purpose of this prospective clinical study was to evaluate the clinical and esthetic outcomes of using tissue-level implants with a convergent collar in the esthetic zone that had been rehabilitated following the biological oriented preparation technique (BOPT) approach after a 3-year follow-up period. MATERIAL AND METHODS: Sixteen participants with at least 1 nonrestorable tooth in the maxillary anterior region or with congenitally missing maxillary lateral incisors were enrolled, and tissue-level implants with a convergent collar were inserted 3 months after extraction. The implants were restored with cemented single crowns designed according to the BOPT protocol. Bone resorption and the pink esthetic score were evaluated over a 3-year period. RESULTS: Fifteen participants (mean age: 54.6 years) were evaluated over the 3-year period (total: 16 implants). One participant with 1 implant relocated dropped out of the study. The 3-year implant cumulative survival rate was 100%. The mean ±standard deviation bone-level change was 0.071 ±0.11 mm. The mean pink esthetic score was 8.5 ±1.59, range 4-10. CONCLUSIONS: The use of the BOPT protocol to restore tissue-level implants with a convergent collar achieved good esthetic results and maintained stable soft and hard peri-implant tissues.

Oral Health-Related Quality of Life and Full-Arch Immediate Loading Rehabilitation: An Evaluation of Preoperative, Intermediate, and Posttreatment Assessments of Patients Using a Modification of the OHIP Questionnaire.

The aim of this study was to assess oral health-related quality of life (OHRQoL) of patients before, during, and after completion of implant-supported full-arch immediate loading rehabilitation according to the Columbus Bridge Protocol. Twenty-five patients with compromised dentition were rehabilitated according to the Columbus Bridge Protocol and were assessed for OHRQoL using 4 questionnaires specifically designed for this study and inspired by the Oral Health Impact Profile questionnaire. Patients assessed themselves before surgery, during the healing period (1 week and 2 months after surgery), and after definitive prosthodontic treatment (4 months after surgery). The questionnaires specifically investigated patients' pain, comfort, home oral hygiene habits, satisfaction related to esthetics, masticatory ability, phonetics and general satisfaction with the treatment. Patients reported an improvement of OHRQoL after full-arch immediate-loading rehabilitation. A statistically significant improvement in esthetics and chewing ability was found. After 4 months 92% of the patients did not feel tense about their smile, 96% did not indicate problems relating to other people or smiling, and 92% did not have difficulty eating some foods. Phonetics were a critical issue, especially in the intermediate phase of healing. One week after surgery, the percentage of patients who were very satisfied with phonetics slightly decreased from 48% to 36%. The assessment of patients' OHRQoL related to full-arch immediate-loading implant therapy exhibited a significant improvement in quality of life. The questionnaires herein presented could be an effective tool to evaluate patients' reaction to oral rehabilitation.

Radiological and Histomorphometric Outcomes of Homologous Bone Graft in Postextractive Implant Sites: A 6-Year Retrospective Analysis.

OBJECTIVES: The aim was to investigate the in vivo efficacy of a cancellous particulate allograft bone in the regeneration of postextractive atrophic sites. MATERIAL AND METHODS: Ten patients were selected, and after a minimally invasive extraction of the teeth (T0), a cone beam computed tomography was performed (T1). Seven days after extraction, Puros cancellous particulate homologous graft was inserted into the elected sites together with a membrane (T2). After 4 months, a cone beam computed tomography of the sites was performed (T3). After 5 months, samples of the regenerated sites were taken contextually to implant insertion (T4). The samples were histologically and histomorphometrically analyzed. Intraoral periapical radiographs were accomplished at T4 and at the 6-year follow-up appointment (T5). RESULTS: The mean vertical bone augmentation was of 4.1 mm in the lower jaw and of 3.35 mm in the maxilla at T3 appointment. The mean horizontal bone augmentation in the lower jaw was 2.02 and 2.15 mm in the maxilla. At T4, the mean total bone was 60.01% and the mature bone was 98.41. At the 6-year follow-up visit, the mean periimplant bone resorption was 0.14 mm (range 0-0.5 mm). CONCLUSIONS: Cancellous particulate allograft bone demonstrated excellent bone regeneration behavior both in terms of quantity and quality, and stable results over a 6-year period. CLINICAL RELEVANCE: Cancellous allograft bone can be successfully used to regenerate atrophic sites.

Accuracy of multi-unit implant impression: traditional techniques versus a digital procedure.

OBJECTIVES: The objective of this study was to evaluate the accuracy of different impression techniques on multiple implants. MATERIAL AND METHODS: A master cast simulating a jaw with four implants was used. Eight impression techniques were tested: open tray-polyether#1, open tray plus splint of impression copings with acrylic resin-polyether#1, closed tray-polyether#1, open tray-polyether#2, open tray-splint-polyether#2, closed tray-polyether#2, open tray-impression plaster, and digital impression (DI). Five impressions of the master cast were taken with each traditional impression (TI) technique, pouring 35 sample casts. Three different clinicians took 5 DI each (n = 15). A three-dimensional coordinate measurement machine (CMM) was used to measure implant angulation and inter-implant distances on TI casts. TI data and DI Standard Tessellation Language datasets were compared with the master cast. The best and the worst impressions made with TI and DI were selected to fabricate four milled titanium frameworks. Passive fit was evaluated through Sheffield test, screwing each framework on the master cast. Gaps between framework-implant analogs were measured through a stereomicroscope (×40 magnification). RESULTS: Statistically significant differences in accuracy were found comparing the different impression techniques by CMM (p < 0.01). DI performed the best, while TI techniques revealed a greater variability in the results. Sheffield test revealed a mean gap of 0.022 ± 0.023 mm (the best TI), 0.063 ± 0.059 mm (the worst TI), 0.015 ± 0.011 mm (the best DI), and 0.019 ± 0.015 mm (the worst DI). CONCLUSIONS: Within the limits of this in vitro study, the digital impression showed better accuracy compared to conventional impressioning. CLINICAL RELEVANCE: The digital impression might offer a viable alternative to traditional impressions for fabrication of full-arch implant-supported prostheses with satisfactory passive fit.

Analysis of Different Impression Techniques and Materials on Multiple Implants Through 3-Dimensional Laser Scanner.

OBJECTIVE: The aim of this study was to evaluate the accuracy of 7 different implant impression techniques for full-arch prostheses. MATERIALS AND METHODS: A master cast simulating an edentulous arch with 4 implants was used. Seven impression techniques were tested: open tray with polyether Impregum (OTI); open tray with splint-polyether Impregum (OTSI); closed tray with polyether Impregum; open tray with polyether Ramitec; open tray with splint-polyether Ramitec; closed tray with polyether Ramitec (CTR); open tray with impression plaster (OTP). Five impressions of the master cast were taken for each technique using an impression simulator device. Casts were realized based on those impressions (n = 35). Median values of deviation from the master cast were recorded for each cast through a 3-dimensional laser scanner. RESULTS: Only OTI (P = 0.028) and OTSI (P < 0.001) presented a statistically significant difference compared to the master cast. OTP (P = 0.99) and CTR (P = 0.10) showed median values of deviation close to zero (-0.001 and -0.003 mm, respectively). CONCLUSION: Stiff impression materials (such as plaster or rigid polyether) guarantee greater accuracy in cases of multiple implant impressions of patients with full-arch rehabilitations. Splinting of impression copings with acrylic resin did not improve accuracy.

A Luting Technique for Passive Fit of Implant-Supported Fixed Dentures.

Several factors contribute to distortion of implant prostheses during fabrication and could prevent passive, accurate adaptation between implants and implant frameworks. The misfit between implants and restorative components may be significant and possibly lead to biologic or mechanical complications. The aim of this article is to describe a laboratory luting technique used to lute implant cylinders to metal frameworks in implant prostheses. This technique provides accurate, passive fits. According to this technique, titanium implant cylinders provided with corresponding external castable cylinders are used. Implant cylinders are screwed into the analogs in the master cast while the castable cylinders on top are splinted together using castable resin to realize a castable resin pattern. After casting, the framework is adjusted and cemented to the titanium cylinders on the master cast. Due to its ease and quickness of use and clinical efficiencies, this technique is deemed particularly useful in immediate loading rehabilitations.

Brånemark Novum® immediate loading rehabilitation of edentulous mandibles: 11-year retrospective study.

OBJECTIVES: Short-term results indicated that the Brånemark Novum® protocol (Nobel Biocare AB, Goteborg, Sweden) allowed successful rehabilitation of mandibular edentulism with immediately loaded implants. Yet, long-term studies are lacking. The aim of the present retrospective study was to report the 11-year outcomes for patients treated according to this protocol. MATERIAL AND METHODS: Four patients treated according to the Brånemark Novum protocol (Nobel Biocare AB) were followed-up to evaluate implant and prosthesis cumulative survival rate (CSR), implant stability (RFA), marginal bone loss by periapical radiographs, probing depth (PD), and possible complications. Clinical and radiographic parameters were evaluated immediately after completion of the treatment and 1, 5, and 11 years after loading. RESULTS: The 11-year implant and prosthesis CSRs were 100%. Implant stability (RFA values) remained stable over the 11-year follow-up. Small bone resorption was found next to distal implants (median 1 mm) after 11 years, while central implants showed greater bone resorption (median 4.5 mm). The PD (mean 3.75 mm at 11 years) grew together with marginal bone loss. One implant complication was detected on a central implant (crater-form bone destruction), and 10 prosthetic complications (fractures of resin or teeth), 80% of which registered on the same parafunctional patient. CONCLUSIONS: The 11-year results demonstrated that the Brånemark Novum protocol (Nobel Biocare AB) is a predictable technique with favorable long-term outcomes. This was a rigid protocol, which could be applied only in patients with specific anatomical characteristics of the lower jaw, but it had the merit of indicating the key factors for full-arch immediate loading rehabilitations.

Morphological and chemical characteristics of different titanium surfaces treated by bicarbonate and glycine powder air abrasive systems.

OBJECTIVES: This in vitro study investigated possible morphological and chemical changes induced by glycine or sodium bicarbonate powder air polishing on machined and acid-etched titanium surfaces. MATERIALS AND METHODS: The glycine powder (granulometry <65 µm) and sodium bicarbonate powder (granulometry <150 µm) were applied on 2 machined healing abutments and on 2 acid-etched healing abutments. The samples were characterized by scanning electron microscopy coupled with energy dispersive x-ray spectroscopy. The analyses were performed at different steps: (1) as received, right after opening the abutment packaging; (2) after 20 minutes air exposure; (3) after aging in artificial saliva; (4) after glycine or sodium bicarbonate powder air polishing for 5 seconds; (5) after repetition of steps 3 and 4 with longer time of polishing (20 seconds). CONCLUSIONS: Air polishing using glycine and sodium bicarbonate powder seemed to be safe for professional oral hygiene of titanium dental implants, although acid-etched abutments and abutments treated with bicarbonate harbored more salts. This might indicate a greater plaque accumulation in a clinical situation. However, this result has to be investigated in vivo to understand its clinical relevance.

Peri-implant Tissue Health and Bone Resorption in Implant- Supported Fixed Partial Rehabilitations.

PURPOSE: To evaluate peri-implant tissue health and bone resorption in patients with implant-supported fixed partial rehabilitations. In particular, possible correlations between plaque accumulation and bone loss, as well as other periimplant health parameters, were investigated. MATERIALS AND METHODS: A total of 44 patients rehabilitated with fixed implant-supported partial rehabilitations were included. The following parameters were recorded: spontaneous bleeding (SB), suppuration, bleeding on probing (BOP), plaque index (PI), and probing depth (PD). Periapical radiographs were taken to measure crestal bone loss (BL). A nonparametric test (Spearman rank coefficient; rs) was used to identify possible correlations between the clinical parameters recorded. RESULTS: A total of 121 implants were analyzed. Global PI and BOP were 49.58% and 20.25%, respectively. There were no cases of suppuration, and only 2 implants showed spontaneous bleeding. Mean BL was 1.53 mm (SD: 0.98). No implants showed peri-implantitis. There was a weak, statistically significant correlation between PI and BL (rs = 0.27, P [2-tailed] = .99) and between PI and the other peri-implant parameters (BOP: rs = 0.14, P = .14; PD: rs = 0.04, P = .65; SB: rs = -0.08, P = .34). A very weak correlation was also found between BL and BOP (rs = 0.1, P = .2) and between BL and PD (rs = 0.02, P = .7). Correlation was found between BL and age (rs = 0.13, P = .81) and between the other peri-implant parameters and age using dichotomization (> or < 65 years; PI: rs = -0.14, P = .11; PD: rs = -0.21, P = .01; BOP: rs = -0.21, P = .01; SB: rs = 0.05, P = .53). No statistically significant correlations were found between the clinical parameters evaluated and the sex or the dental arch treated (maxilla vs mandible). In contrast, the correlation between periodontal parameters and years elapsed since surgery (follow-up) was significant. CONCLUSIONS: The present research suggests that in implant-supported fixed partial rehabilitations, dental implants with greater plaque accumulation are more likely to present augmented probing depth, peri-implant inflammation, and bone loss, although the correlation is statistically very weak. Patient age and time of follow-up also significantly affected peri-implant health parameters.

Antimicrobial Activity of Glycine Air Polishing: A Clinical Split- Mouth Study on Full-Arch Implant-Supported Rehabilitations.

PURPOSE: To investigate the possible antimicrobial activity of glycine air polishing by comparing peri-implant microbiota before and after treatment. MATERIALS AND METHODS: A total of 15 patients who received implant-supported full-arch fixed rehabilitations were included. After prosthesis removal (T0), Plaque Index (PI), probing depth (PD), and bleeding on probing (BOP) were recorded. In each hemiarch, the implant with the highest PD score was selected for microbiologic sample collection from the peri-implant sulcus (T0). All patients received two different hygienic protocols (randomly administered, one per each hemiarch): glycine air-polishing (G) and cleansing with cotton pellets soaked in saline (C). At 7 days (T1) and 3 months (T2) after the intervention, PI and BOP were recorded, and new microbiologic samples were taken. Traditional polymerase chain reaction (PCR) and quantitative PCR real-time were employed for microbiologic analysis to investigate how the presence of different bacterial species varied according to the hygienic treatment performed. RESULTS: Treatment G provided a significantly higher PI score reduction around implants compared to treatment C (P = .015). No statistical difference was found in the microbial population around G and C implant sites, with Tannerella forsythia being the most commonly detected bacterial species in both G and C groups. No statistical differences were found between the antimicrobial activity of treatments C and G. CONCLUSIONS: Glycine powder air polishing is a valid method for professional hygienic care of implants and was more effective in PI reduction compared to the control treatment. However, its antimicrobial efficacy cannot be confirmed by the outcomes of the present study.

Effect of auxiliary geometric devices on the accuracy of intraoral scans in full-arch implant-supported rehabilitations: An in vitro study.

OBJECTIVES: The aim of the present in vitro study was to evaluate the effect of a novel auxiliary geometric device (AGD) on the accuracy of full-arch scans captured with 3 different intraoral scanners (IOS). METHODS: An edentulous maxillary model with four internal connection implant replicas was scanned using 3 different IOS: iTero Element 5D (ITERO) (Align Technology, Tempe, AZ, USA), Trios 4 (TRIOS) (3Shape A/S, Copenhagen, Denmark), and Carestream 3700 (CS) (Carestream Dental, Atlanta, USA). Thirty-six scans were taken with each IOS, 18 with the AGD in place, and 18 without the AGD. A digital master model was created using an industrial optical scanner (ATOS compact Scan 5M, GOM GmbH, Braunschweig, Germany). The master and IOS models were aligned using the scan bodies as a reference area. A surface comparison was performed, and deviation labels were exported for each scan body to evaluate the linear and angular deviation. Total body, platform and angular deviations were measured. RESULTS: The use of AGD resulted in a statistically significant increase of angular deviation: 0.87° (SD=0.21) in the AGD group versus 0.64° (SD=0.46) in the no AGD group (p-value=0.005). The difference between the AGD and no AGD groups was not statistically significant for total body and platform deviation values (p-value=0.051 and 0.302 respectively). Using AGD, ITERO showed a statistically significant increase in angular deviation (mean difference=-0.46 µm, p-value=0.002) and a decrease in mean platform deviation (mean difference=63.19 µm, p-value<0.001). No statistically significant differences were found for the other IOS. CONCLUSIONS: The use of AGD did not add benefit on CS and TRIOS. On ITERO, there was an improvement in platform deviation, that was outweighed by the worsening of the angular deviation. CLINICAL SIGNIFICANCE: In vitro data suggest that intraoral scans can be successfully used in full-arch cases. The use of AGD has no additional benefit on CS and TRIOS. On ITERO there was an improvement in platform deviation that was outweighed by the worsening of the angular deviation. Translational application to clinical practice deserves further investigation, taking into account patient-related and anatomical variables.