GEnZ explorer: a tool for visualizing agroclimate to inform research and regulatory risk assessment.

Confined field trials (CFT) of genetically engineered (GE) crops are used to generate data to inform environmental risk assessments (ERA). ERAs are required by regulatory authorities before novel GE crops can be released for cultivation. The transportability of CFT data to inform risk assessment in countries other than those where the CFT was conducted has been discussed previously in an analysis showing that the primary difference between CFT locations potentially impacting trial outcomes is the physical environment, particularly the agroclimate. This means that data from trials carried out in similar agroclimates could be considered relevant and sufficient to satisfy regulatory requirements for CFT data, irrespective of the country where the CFTs are conducted. This paper describes the development of an open-source tool to assist in determining the transportability of CFT data. This tool provides agroclimate together with overall crop production information to assist regulators and applicants in making informed choices on whether data from previous CFTs can inform an environmental risk assessment in a new country, as well as help developers determine optimal locations for planning future CFTs. The GEnZ Explorer is a freely available, thoroughly documented, and open-source tool that allows users to identify the agroclimate zones that are relevant for the production of 21 major crops and crop categories or to determine the agroclimatic zone at a specific location. This tool will help provide additional scientific justification for CFT data transportability, along with spatial visualization, to help ensure regulatory transparency.

Donor site morbidity after computer assisted surgical reconstruction of the mandible using deep circumflex iliac artery grafts: a cross sectional study.

BACKGROUND: Computer Assisted Design and Computer Assisted Manufacturing (CAD/CAM) have revolutionized oncologic surgery of the head and neck. A multitude of benefits of this technique has been described, but there are only few reports of donor site comorbidity following CAD/CAM surgery. METHODS: This study investigated comorbidity of the hip following deep circumflex iliac artery (DCIA) graft raising using CAD/CAM techniques. A cross-sectional examination was performed to determine range of motion, muscle strength and nerve disturbances. Furthermore, correlations between graft volume and skin incision length with postoperative donor site morbidity were assessed using Spearman's rank correlation, linear regression and analysis of variance (ANOVA). RESULTS: Fifteen patients with a mean graft volume of 21.2 ± 5.7 cm3 and a mean incision length of 228.0 ± 30.0 mm were included. Patients reported of noticeable physical limitations in daily life activities (12.3 ± 11.9 weeks) and athletic activities (38.4 ± 40.0 weeks in mean) following surgery. Graft volume significantly correlated with the duration of the use of walking aids (R = 0.57; p = 0.033) and impairment in daily life activities (R = 0.65; p = 0.012). The length of the scar of the donor-site showed a statistically significant association with postoperative iliohypogastric nerve deficits (F = 4.4, p = 0.037). Patients with anaesthaesia of a peripheral cutaneous nerve had a larger mean scar length (280 ± 30.0 mm) than subjects with hypaesthesia (245 ± 10.1 mm) or no complaints (216 ± 27.7 mm). CONCLUSIONS: Despite sophisticated planning options in modern CAD/CAM surgery, comorbidity of the donor site following  iliac graft harvesting is still a problem. This study is the first to investigate comorbidity after DCIA graft raising in a patient group treated exclusively with CAD/CAM techniques. The results indicate that a minimal invasive approach in terms of small graft volumes and small skin incisions could help to reduce postoperative symptomatology. Trial registration Retrospectively registered at the German Clinical Trials Register (DRKS-ID: DRKS00029066); registration date: 23/05/2022.

Stimulated Raman histology for histological evaluation of oral squamous cell carcinoma.

OBJECTIVES: To investigate whether in patients undergoing surgery for oral squamous cell carcinoma, stimulated Raman histology (SRH), in comparison with H&E-stained frozen sections, can provide accurate diagnoses regarding neoplastic tissue and sub-classification of non-neoplastic tissues. MATERIALS AND METHODS: SRH, a technology based on Raman scattering, was applied to generate digital histopathologic images of 80 tissue samples obtained from 8 oral squamous cell carcinoma (OSCC) patients. Conventional H&E-stained frozen sections were then obtained from all 80 samples. All images/sections (SRH and H&E) were analyzed for squamous cell carcinoma, normal mucosa, connective tissue, muscle tissue, adipose tissue, salivary gland tissue, lymphatic tissue, and inflammatory cells. Agreement between SRH and H&E was evaluated by calculating Cohen's kappa. Accuracy of SRH compared to H&E was quantified by calculating sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) as well as area under the receiver operating characteristic curve (AUC). RESULTS: Thirty-six of 80 samples were classified as OSCC by H&E-based diagnosis. Regarding the differentiation between neoplastic and non-neoplastic tissue, high agreement between H&E and SRH (kappa: 0.880) and high accuracy of SRH (sensitivity: 100%; specificity: 90.91%; PPV: 90.00%, NPV: 100%; AUC: 0.954) were demonstrated. For sub-classification of non-neoplastic tissues, SRH performance was dependent on the type of tissue, with high agreement and accuracy for normal mucosa, muscle tissue, and salivary glands. CONCLUSION: SRH provides high accuracy in discriminating neoplastic and non-neoplastic tissues. Regarding sub-classification of non-neoplastic tissues in OSCC patients, accuracy varies depending on the type of tissue examined. CLINICAL RELEVANCE: This study demonstrates the potential of SRH for intraoperative imaging of fresh, unprocessed tissue specimens from OSCC patients without the need for sectioning or staining.

Virtual reconstruction of orbital floor defects using a statistical shape model.

PURPOSE: The current standard in reconstructing defects of the orbital floor, by using the concept of mirroring, is time-consuming and ignores the natural asymmetry of the skull. By using a statistical shape model (SSM), the reconstruction can be automatized and improved in accuracy. The present study aims to show the possibilities of the virtual reconstruction of artificial defects of the orbital floor using an SSM and its potentials for clinical implementation. METHODS: Based on 131 unaffected CT scans of the midface, an SSM was created which contained the shape variability of the orbital floor. Nineteen midface CT scans, that were not included in the SSM, were manually segmented to establish ground truth (control group). Then artificial defects of larger and smaller sizes were created and reconstructed using SSM (Group I) and the gold standard of mirroring (Group II). Eventually, a comparison to the surface of the manual segmentation (control group) was performed. RESULTS: The proposed method of reconstruction using an SSM leads to more precise reconstruction results, compared with the conventional method of mirroring. Whereas mirroring led to the reconstruction errors of 0.7 mm for small defects and 0.73 mm for large defects, reconstruction using SSM led to deviations of 0.26 mm (small defect) and, respectively, 0.34 mm (large defect). CONCLUSIONS: The presented approach is an effective and accurate method for reconstructing the orbital floor. In connection with modern computer-aided design and manufacturing, individual patient-specific implants could be produced according to SSM-based reconstructions and could replace current methods using manual bending techniques. By acknowledging the natural asymmetry of the human skull, the SSM-based approach achieves higher accuracy in reconstructing injured orbits.

Creating an anatomical wax-up in partially edentulous patients by means of a statistical shape model.

PURPOSE: Creating wax-ups of missing teeth for backward planning in implant surgery is a complex and time-consuming process. To facilitate implant-planning procedures, the automatic generation of a virtual wax-up would be useful. In the present study, the reconstruction of missing teeth in partially edentulous patients was performed automatically using newly developed software. The accuracy was investigated in order to test its clinical applicability. MATERIALS AND METHODS: This study presents a new method for creating an automatic virtual wax-up, which could serve as a basic tool in modern implant-planning procedures. First, a statistical shape model (SSM) based on 76 maxillary and mandibular arch scans from dentally healthy individuals was generated. Then, artificially generated tooth gaps were reconstructed. The accuracy of the workflow was evaluated on a separate testing sample of 10 individuals with artificially created tooth gaps given as a median deviation, in millimeters. Scans of three clinical cases with partial edentulism were equally reconstructed using the SSM and compared with the final prosthodontic work. RESULTS: The reconstruction of the artificial tooth gaps could be performed with the following median reconstruction accuracy: gap 21 with 0.15 mm; gap 27 with 0.20 mm; gap 34 with 0.22 mm: gap 36 with 0.22 mm; gaps 12 to 22 with 0.22 mm; gaps 34 to 36 with 0.22 mm. A scenario for an almost edentulous mandible with all teeth missing except teeth 33 and 43 could be reconstructed with a median reconstruction accuracy of 0.37 mm. The median tooth gap deviation of the SSM-based reconstruction in clinical cases differed from the final inserted prosthodontic teeth by 0.49 to 0.86 mm in median. CONCLUSION: A first feasibility of creating virtual wax-ups using an SSM could be shown. Artificially generated tooth gaps could be reconstructed close to the original with the proposed workflow. In the clinical cases, the SSM proposes an anatomical reconstruction, which does not yet consider prosthodontic aspects. To obtain clinical use, contact with antagonist teeth must be considered and more training data must be implemented. However, the presented method offers a fast and viable way for the approximate placement of missing crowns. This could be used in a digital planning workflow when implant position must be determined. (Int J Comput Dent 2022;25(4):349-0; doi: 10.3290/j.ijcd.b2599407).

Evaluation of computed tomography settings in the context of visualization and discrimination of low dose injections of a novel liquid soft tissue fiducial marker in head and neck imaging.

BACKGROUND: Intraoperative incorporation of radiopaque fiducial markers at the tumor resection surface can provide useful assistance in identifying the tumor bed in postoperative imaging for RT planning and radiological follow-up. Besides titanium clips, iodine containing injectable liquid fiducial markers represent an option that has emerged more recently for this purpose. In this study, marking oral soft tissue resection surfaces, applying low dose injections of a novel Conformité Européenne (CE)-marked liquid fiducial marker based on sucrose acetoisobutyrate (SAIB) and iodinated SAIB (x-SAIB) was investigated. METHODS: Visibility and discriminability of low dose injections of SAIB/x-SAIB (10 µl, 20 µl, 30 µl) were systematically studied at different kV settings used in clinical routine in an ex-vivo porcine mandible model. Transferability of the preclinical results into the clinical setting and applicability of DE-CT were investigated in initial patients. RESULTS: Markers created by injection volumes as low as 10 µl were visible in CT imaging at all kV settings applied in clinical routine (70-120 kV). An injection volume of 30 µl allowed differentiation from an injection volume of 10 µl. In a total of 118 injections performed in two head and neck cancer patients, markers were clearly visible in 83% and 86% of injections. DE-CT allowed for differentiation between SAIB/x-SAIB markers and other hyperdense structures. CONCLUSIONS: Injection of low doses of SAIB/x-SAIB was found to be a feasible approach to mark oral soft tissue resection surfaces, with injection volumes as low as 10 µl found to be visible at all kV settings applied in clinical routine. With the application of SAIB/x-SAIB reported for tumors of different organs already, mostly applying relatively large volumes for IGRT, this study adds information on the applicability of low dose injections to facilitate identification of the tumor bed in postoperative CT and on performance of the marker at different kV settings used in clinical routine.

Do Red Blood Cell Transfusions Influence Long-Term Outcomes in Patients Undergoing Primary Surgery for Oral Squamous Cell Carcinoma?

PURPOSE: There is no consensus on the impact of red blood cell (RBC) transfusion on patients with oral squamous cell carcinoma (OSCC). The purpose of this study was to investigate the association between RBC transfusions and overall survival (OS) and tumor-free survival (TFS) after operative treatment of OSCC. METHODS: In this retrospective cohort study, all patients treated with primary surgery between 2003 and 2017 because of OSCC were chart reviewed. The occurrence and amount of RBC transfusions (0; 1-3; >3 units) was correlated with OS and TFS by Kaplan-Meier survival and Cox regression analyses. Demographic, clinical, and pathological parameters were also evaluated in order to identify confounding factors. RESULTS: Of 420 patients (243 [57.9%] male) with a mean age of 62.6 years, 67 (16.0%) received RBC transfusion. There were statistically significant (P < .01) differences in 5-year OS respectively TFS in transfused patients for the Kaplan-Meier survival analysis (0 units = 70.6%; [95% confidence interval {CI}: 65.0-75.4%] respectively 63.2% [95% CI: 57.4-68.4%], 1-3 units = 47.2% [95% CI: 29.4-63.1%] respectively 40.6% [95% CI: 24.6-55.95%] and >3 units = 48.9% [95% CI: 20.9-72.1%] respectively 30.5% [95% CI: 8.9-55.8%]). After multivariate adjustments for demographic, clinical, and pathological parameters, RBC transfusion could not be sustained as a significant prognostic factor in OS respectively TFS (1-3 units: hazard ratio = 1.5 [95% CI: 0.7-3.2] respectively 1.3 [95% CI: 0.7-2.6]; >3 units: hazard ratio = 1.2 [95% CI: 0.5 - 3.0] respectively 1.1 [95% CI: 0.5-2.4]). CONCLUSIONS: Although RBC transfusion was not identified as a significant prognostic parameter in multivariate analysis, a clear trend for shorter OS and TFS for transfused patients in univariate and Kaplan-Meier survival analysis could be shown.

Successful Management of Cleft Lip and Palate Malformation without Pre-Surgical Infant Orthopedics.

OBJECTIVE: To investigate the effect of lip closure on reduction of cleft palates when no pre-surgical infant orthopedics (PSIO) are used. STUDY DESIGN: Retrospective patient chart-review in our department for Cranio-Maxillofacial Surgery at the University Medical Centre Freiburg, Germany. 19 patients at the age of 5.9 ± 2.1 months with surgical treatment of uni- (UCLP), or bilateral cleft lip and palate (BCLP) without any use of PSIO were included. RESULTS: Early soft tissue correction of the lip leads to an effective reduction of the maxillary arch without any use of PSIO. The presented conventional and digital measurements appeared to be reliable. A successful reduction of the cleft width (UCLP = 3.88 ± 2.42mm, BCLP = 7.33 ± 5.00mm), the width of the alveolar arch (1.91 ± 1.36mm) and the sagittal depth of the alveolar arch (3.07 ± 2.71 mm) could be achieved with the presented workflow. CONCLUSIONS: Cleft reduction was obtainable without PSIO when lip closure after Tennison-Randall was performed.

Pandemic-Driven Development of a Medical-Grade, Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication.

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost-benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.

[Use of the Multidisciplinary Specialised Case Conference at the Freiburg Orbital Centre]. / Inanspruchnahme der multidisziplinären spezialisierten Fallkonferenz im Freiburger Orbitazentrum.

BACKGROUND: The treatment of tumors increasingly takes place in specialised interdisciplinary centres. Therapeutic decisions are usually made at case conferences. Ophthalmologists, oromaximillofacial surgeons, ENT physicians, neurosurgeons, as well as pediatricians, radiotherapists and radiologists are all involved in the treatment of orbital diseases. The aim of this article is to present the concept of a multidisciplinary case conference for orbital diseases and to analyse case numbers, indications, and the influence on the patient's therapy. METHODS: We analysed an anonymized data set of patients who presented in the case conference of the University Hospital Freiburg from 2008 to 2018 with regard to clinical diagnosis, histological diagnoses, number of surgical interventions, and number of interdisciplinary therapy decisions. RESULTS: From 2008 to 2018, 545 patients were presented in a weekly conference. Of these, 453 were available for anonymous evaluation. The median age was 56 years (quartiles 41; 69). The most frequent indication was an orbital tumour of unclear malignancy (n = 52; 11%). Further indications included Grave's orbitopathy (n = 39; 9%), orbital pseudotumour (n = 36; 8%), cranial nerve palsy (n = 22; 5%), and orbital lymphoma (n = 22; 5%). The most frequent histological diagnoses were B-cell lymphoma (n = 10; 2%), venous malformation (cavernoma, n = 8; 2%), marginal zone lymphoma (n = 8; 2%), and squamous cell carcinoma (n = 6; 1%). An interdisciplinary therapeutic approach was defined for 174 patients. CONCLUSION: A high demand for the interdisciplinary case conference was demonstrated. The high rate of primary or secondary interdisciplinary decisions indicates the value of such a conference. Hence, the patient is spared multiple examinations in the individual specialist areas and quick and effective therapy decisions can be achieved.

Vascularized scapula and latissimus dorsi flap for CAD/CAM assisted reconstruction of mandibular defects including the mandibular condyle: technical report and clinical results.

BACKGROUND: Reconstruction of mandibular continuity and function after tumor resection is challenging, particularly in cases including the mandibular condyle. Various approaches for reconstruction after disarticulation resection have been reported. However, the scapula flap has received little attention as a treatment option in these cases. PATIENTS AND METHODS: Three cases of computer aided design and computer aided manufacturing (CAD/CAM) assisted reconstruction after disarticulation resection using a vascularized scapula and latissimus dorsi flap are reported. All cases required reconstruction of the mandibular ramus and condyle in combination with the reconstruction of large and complex soft tissue defects. RESULTS: The surgical procedure was deemed successful in all cases. The scapula flap could be placed as preoperatively planned and patients regained their preoperative occlusion pattern and satisfying mouth opening-ranges. The large soft tissue defects could reliably be reconstructed using a latissimus dorsi flap. CONCLUSIONS: The scapula and latissimus dorsi flap can be considered a suitable option for the reconstruction of mandibular disarticulation resection defects in combination with large soft tissue defects.

Understanding local community's values, worldviews and perceptions in the Galloway and Southern Ayrshire Biosphere Reserve, Scotland.

Biosphere reserves have been studied around the world, but methods to elicit community's values, worldviews and perceptions are missing. A greater understanding of these can help avoid tension and improve successful management. This paper used a mixed-methods survey to elicit local community's environmental values, ecological world views and perceptions of the Galloway and Southern Ayrshire Biosphere Reserve (GSABR). Over three weeks, forty participants from three communities of the GSABR responded to a semi-structured mixed-methods survey. The survey revealed that residents of the GSABR greatly value wildlife and beauty of nature, and that the majority of the respondents showed concern for the environment from an ecocentric worldview. Results also revealed that the most influential tested socio-demographic characteristic affecting people's relationship to their environment is their professional affiliation. Tourism and recreation were seen as major benefits of the recent biosphere designation. Results did highlight contrasting benefits from the designation for different stakeholder groups, which could potentially lead to tensions and should be considered in the reserve management. Given the community's supportive world views and perceptions, greater participation in the biosphere's management in likely to be welcomed and should be used to avoid or mediate any conflicts. The mixed-method survey developed for this study, proved successful in eliciting these themes in the GSABR. We recommend other biosphere reserves replicate this research, to gain better understanding of local communities and increase their support and participation in reserve management.

A Novel Method to Evaluate Precision of Optical Implant Impressions with Commercial Scan Bodies-An Experimental Approach.

PURPOSE: Optical transfer is realized with system-specific transfer posts (scan bodies) mounted on dental implants or on implant analogs. This study presents a novel algorithm for creation of geometry on the surface of dental implant scan bodies and examines the precision of the optical acquisition of scan bodies and the precision of the position of the screw-tightened scan bodies on dental implant analogs. MATERIALS AND METHODS: Scan bodies of two different implant manufacturers (S1, S2), one with a horizontal and two with different conical implant-abutment geometries were screw tightened to implant analogs in stone casts with a 10 Ncm torque. The stone casts were scanned ten times with a dental lab scanner. Each scan body was removed and positioned ten times; after each repositioning, a scan was performed. The cylinder axis of every scan body and the occlusal horizontal scan body surface was virtually reconstructed. At the intersection of the cylinder axis and the horizontal plane a point was marked. The mean deviation of this point in consecutive scans and the angle between the scan body axes in the virtual models were measured, and the standard deviation was calculated. Statistical significance of the results was tested with a Kruskal-Wallis Test and Mann-Whitney U-test for pairwise comparison (p < 0.05). RESULTS: The mean deviation of the angle between two scan bodies was 0.05° (SD 0.04°) (S1) and 0.14° (SD 0.08°) (S2). After detachment and repositioning of the scan bodies the mean deviation was 0.05° (SD 0.03°) (S1) and 0.16° (SD 0.08°) (S2). The mean deviation of the central point was 5.7 µm (SD 3.4 µm) without detachment and 4.9 µm (SD 2.6 µm) after detachment and repositioning (S1). For system S2 the mean deviation of the central point was 13.4 µm (SD 7.2 µm) after repeated scanning and 15 µm (SD 5 µm) after detachment, repositioning, and repeated scanning. CONCLUSIONS: The precision of extraoral scanning of scan bodies is dependent on the scan body surface design and geometry. The precision of scanning with an extraoral model scanner differed between the scan body geometries and inter-scan body distances. The precision of dental implant scan body scanning was not significantly influenced by detachment and repositioning of the scan body.

Computer-Assisted Designed and Manufactured Procedures Facilitate the Lingual Application of Mandible Reconstruction Plates.

PURPOSE: Lingual positioning of mandible reconstruction plates can prevent typical complications such as plate exposure and orocutaneous fistulas. The aim of this study was to evaluate the feasibility and clinical outcomes of lingually applied patient-specific reconstruction plates. MATERIALS AND METHODS: A retrospective cohort study of patients managed with reconstruction plates positioned at the lingual side of the mandible was performed. The following outcome variables were analyzed: feasibility and handling of the lingual application, fitting accuracy, and postoperative complications. RESULTS: The study sample included 8 patients (4 women, 4 men) with a mean age of 68.8 years (range, 43 to 79 yr). The indications for plate use were defect-like zones owing to multiple fractures in the atrophic mandible (n = 2) and segmental defects attributed to squamous cell carcinoma, osteomyelitis, and bisphosphonate-related osteonecrosis (n = 6). Off-the-shelf reconstruction plates, which were intraoperatively bent (n = 2) or pre-bent to a stereolithographic model (n = 1), or fully computer-assisted designed and computer-assisted manufactured (CAD/CAM) patient-specific reconstruction plates (n = 5) were used. Lingual application of reconstruction plates was feasible in all cases and considerably facilitated by the CAD/CAM plates. The fitting accuracy was high. Within an average follow-up period of 15.3 months, no loosening of plates or screws, plate fracture, or orocutaneous fistula occurred and no dysphagia was observed with the exception of 1 case, in which plate exposure was due to extreme soft tissue thinning and tumor recurrence. CONCLUSIONS: Lingual application of CAD/CAM patient-specific reconstruction plates is technically feasible with high accuracy. It has great potential for low complication rates, especially in unfavorable soft tissue conditions.

Assessing urban adaptive capacity to climate change.

Despite the growing number of studies focusing on urban vulnerability to climate change, adaptive capacity, which is a key component of the IPCC definition of vulnerability, is rarely assessed quantitatively. We examine the capacity of adaptation in the Concepción Metropolitan Area, Chile. A flexible methodology based on spatial fuzzy modelling was developed to standardise and aggregate, through a stepwise approach, seventeen indicators derived from widely available census statistical data into an adaptive capacity index. The results indicate that all the municipalities in the CMA increased their level of adaptive capacity between 1992 and 2002. However, the relative differences between municipalities did not change significantly over the studied timeframe. Fuzzy overlay allowed us to standardise and to effectively aggregate indicators with differing ranges and granularities of attribute values into an overall index. It also provided a conceptually sound and reproducible means of exploring the interplay of many indicators that individually influence adaptive capacity. Furthermore, it captured the complex, aggregated and continued nature of the adaptive capacity, favouring to deal with gaps of data and knowledge associated with the concept of adaptive capacity. The resulting maps can help identify municipalities where adaptive capacity is weak and identify which components of adaptive capacity need strengthening. Identification of these capacity conditions can stimulate dialogue amongst policymakers and stakeholders regarding how to manage urban areas and how to prioritise resources for urban development in ways that can also improve adaptive capacity and thus reduce vulnerability to climate change.

The orbits--anatomical features in view of innovative surgical methods.

The aim of this article is to update on anatomical key elements of the orbits in reference to surgical innovations. This is a selective literature review supplemented with the personal experience of the authors, using illustrations and photographs of anatomical dissections. The seven osseous components of the orbit can be conceptualized into a simple geometrical layout of a four-sided pyramid with the anterior aditus as a base and the posterior cone as apex. All neurovascular structures pass through bony openings in the sphenoid bone before diversification in the mid and anterior orbit. A set of landmarks such as the optic and maxillary strut comes into new focus. Within the topographical surfaces of the internal orbit the lazy S-shaped floor and the posteromedial bulge are principal determinants for the ocular globe position. The inferomedial orbital strut represents a discernible sagittal buttress. The periorbita and orbital soft tissue contents--extraocular muscles, septae, neurovasculature--are detailed and put into context with periorbital dissection.

Orbital reconstruction: prefabricated implants, data transfer, and revision surgery.

External impact to the orbit may cause a blowout or zygomatico-maxillary fractures. Diagnosis and treatment of orbital wall fractures are based on both physical examination and computed tomography scan of the orbit. Injuries of the orbit often require a reconstruction of its orbital walls. Using computer-assisted techniques, anatomically preformed orbital implants, and intraoperative imaging offers precise and predictable results of orbital reconstructions. Secondary reconstruction of the orbital cavity is challenging due to fractures healed in malposition, defects, scarring, and lack of anatomic landmarks, and should be avoided by precise primary reconstruction. The development of preformed orbital implants based on topographical analysis of the orbital cavity was a milestone for the improvement of primary orbital reconstruction.

Virtual tumor mapping and margin control with 3-D planning and navigation.

Computer technology-based treatment approaches like intraoperative navigation and intensity-modulated radiation therapy have become important components of state of the art head and neck cancer treatment. Multidirectional exchange of virtual three-dimensional patient data via an interdisciplinary platform allows all medical specialists involved in the patients treatment to take full advantage of these technologies. This review article gives an overview of current technologies and future directions regarding treatment approaches that are based on a virtual, three-dimensional patient specific dataset: storage and exchange of spatial information acquired via intraoperative navigation allow for a highly precise frozen section procedure. In the postoperative setting, virtual reconstruction of the tumor resection surface provides the basis for improved radiation therapy planning and virtual reconstruction of the tumor with integration of molecular findings creates a valuable tool for postoperative treatment and follow-up. These refinements of established treatment components and novel approaches have the potential to make a major contribution to improving the outcome in head and neck cancer patients.

Reconstruction of dental roots for implant planning purposes: a retrospective computational and radiographic assessment of single-implant cases.

PURPOSE: The aim of the study was to assess the deviation between clinical implant axes (CIA) determined by a surgeon during preoperative planning and reconstructed tooth axes (RTA) of missing teeth which were automatically computed by a previously introduced anatomical SSM. METHODS: For this purpose all available planning datasets of single-implant cases of our clinic, which were planned with coDiagnostix Version 9.9 between 2018 and 2021, were collected for retrospective investigation. Informed consent was obtained. First, the intraoral scans of implant patients were annotated and subsequently analyzed using the SSM. The RTA, computed by the SSM, was then projected into the preoperative planning dataset. The amount and direction of spatial deviation between RTA and CIA were then measured. RESULTS: Thirty-five patients were implemented. The mean distance between the occlusal entry point of anterior and posterior implants and the RTA was 0.99 mm ± 0.78 mm and 1.19 mm ± 0.55, respectively. The mean angular deviation between the CIA of anterior and posterior implants and the RTA was 12.4° ± 3.85° and 5.27° ± 2.97° respectively. The deviations in anterior implant cases were systematic and could be corrected by computing a modified RTA (mRTA) with decreased deviations (0.99 mm ± 0.84 and 4.62° ± 1.95°). The safety distances of implants set along the (m)RTA to neighboring teeth were maintained in 30 of 35 cases. CONCLUSION: The RTA estimated by the SSM revealed to be a viable implant axis for most of the posterior implant cases. As there are natural differences between the anatomical tooth axis and a desirable implant axis, modifications were necessary to correct the deviations which occurred in anterior implant cases. However, the presented approach is not applicable for clinical use and always requires manual optimization by the planning surgeon.

Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization.

Polyolefins exhibit robust mechanical and chemical properties and can be applied in the medical field, e.g. for the manufacturing of dentures. Despite their wide range of applications, they are rarely used in extrusion-based printing due to their warpage tendency. The aim of this study was to investigate and reduce the warpage of polyolefins compared to commonly used filaments after additive manufacturing (AM) and sterilization using finite element simulation. Three types of filaments were investigated: a medical-grade polypropylene (PP), a glass-fiber reinforced polypropylene (PP-GF), and a biocopolyester (BE) filament, and they were compared to an acrylic resin (AR) for material jetting. Square specimens, standardized samples prone to warpage, and denture bases (n = 10 of each group), as clinically relevant and anatomically shaped reference, were digitized after AM and steam sterilization (134 °C). To determine warpage, the volume underneath the square specimens was calculated, while the deviations of the denture bases from the printing file were measured using root mean square (RMS) values. To reduce the warpage of the PP denture base, a simulation of the printing file based on thermomechanical calculations was performed. Statistical analysis was conducted using the Kruskal-Wallis test, followed by Dunn's test for multiple comparisons. The results showed that PP exhibited the greatest warpage of the square specimens after AM, while PP-GF, BE, and AR showed minimal warpage before sterilization. However, warpage increased for PP-GF, BE and AR during sterilization, whereas PP remained more stable. After AM, denture bases made of PP showed the highest warpage. Through simulation-based optimization, warpage of the PP denture base was successfully reduced by 25%. In contrast to the reference materials, PP demonstrated greater dimensional stability during sterilization, making it a potential alternative for medical applications. Nevertheless, reducing warpage during the cooling process after AM remains necessary, and simulation-based optimization holds promise in addressing this issue.