Diverse and Flexible Transmission of fosA3 Associated with Heterogeneous Multidrug Resistance Regions in Salmonella enterica Serovar Typhimurium and Indiana Isolates.

We identified fosA3 at a rate of 2.6% in 310 Salmonella isolates from food animals in Guangdong province, China. The fosA3 gene was genetically linked to diverse antibiotic resistance genes (ARGs), including mcr-1, blaCTX-M-14/55, oqxAB, and rmtB These gene combinations were embedded in heterogeneous fosA3-containing multidrug resistance regions on the transferable ST3-IncHI2 and F33:A-:B- plasmids and the chromosome. This indicated a great flexibility of fosA3 cotransmission with multiple important ARGs among Salmonella species.

[Optimum harvest time of Tulipa edulis based on comparison of biomass accumulation and medicinal quality evaluation].

The optimum harvest time of Tulipa edulis was explored based on biomass accumulation and medicinal quality evaluation. Samples were taken from bud stage (Feb 13th) to dormancy stage (May 14th) and the growth indexes, organs biomasses, drying rate, contents of water-soluble extract and polysaccharides were determined. The results showed that biomass distribution of T. edulis varied with growth center and the bulb gained maximum biomass allocation in the whole growth period. The total biomass accumulation and bulb biomass accumulation　increased in the whole growth period and peaked in fructescence stage. No differences were observed in bulb biomass among fructescence stage, withering stage and dormancy stage. The correlation between bulb biomass allocation and other morphological indexes varied with the harvest time. Bulb dry weight biomass had negative correlation with some morphological indexes of aerial part of T. edulis at bud stage, flower stage and fructescence and had significant positive (P<0.05) or extremely significant positive correlation（P<0.01）with other morphological indexes except for root at bearing fruits stage. The drying rate of bulb of T. edulis increased with the extension of harvest time and peaked in dormancy stage. The water-soluble extract of T. edulis bulb was the highest in pre-growing-stage. The tendency of polysaccharides contents showed a W-shape variation during the harvesting period. The polysaccharides content was the lowest in fructescence stage and was the highest in dormancy stage. Considering the yield and medicinal quality of T. edulis bulb, the optimum harvest time of T. edulis is in the withering stage or early stage of dormancy.

[Karyotype Analysis of Different Populations of Tulipa edulis].

Objective: To explore the karyotype difference and to provide basis for genetic resources conservation and breeding of Tulipa edulis. Methods: Karyological analysis on nine Tulipa edulis populations was carried out with conventional pressed slice method. Results: Nine Tulipa edulis populations investigated were diploid. Seven populations of Tulipa edulis were diploid with x = 12,and the chromosome numbers was 2n = 2x = 24. While the others were diploid with x = 24,and the chromosome numbers was 2n = 2x =48. Chromosome types of Tulipa edulis consisted of m,sm and st. The ratio of the longest chromosome to the shortest one ranged from1. 88 to 2. 34. Asymmetry coefficient ranged from 62. 99% to 71. 97%. Karyotype inclucled 2A,3A and 3B,in which 3B type was the most type and 2A type was observed for the first time in Tulipa edulis. Conclusion: The karyological type varies with population of Tulipa edulis.

[Effects of low temperature on dormancy breaking and growth after planting in bulbs of Tulipa edulis].

The effect of low temperature storage on dormancy breaking, sprouting and growth after planting of Tulipa edulis was studied. The results showed that starch content and activity of amylases significantly decreased during 10 weeks of cold storage, soluble protein content raised at first then decreased, and the peak appeared at the 6th week. However, total soluble sugar content which in- creased slowly at first than rose sharply and reducing sugar content increased during the storage duration. The bulbs with cold storage treatment rooted in the 6th week, which was about 2 weeks earlier than room temperature storage, but there were less new roots in the late period of storage. After stored at a low temperature, bud lengths were longer than that with room temperature treatment. Cold storage treatment could promote earlier emergence, shorten germination time, prolong growth period and improve the yield of bulb, but rarely affect the emergence rate. It was not beneficial to flowering and fruiting. The results indicated that 6-8 weeks of cold storage was deemed to be the key period of dormancy breaking preliminary.

[Effects of different drying methods on processing performance and quality in bulbus of Tulipa edulis].

Effects of different drying methods including sun drying, steamed, boiled, constant temperature drying (at 40, 50, 60 °C) on appearance, hardness, rehydration ratio, dry rate, moisture, total ash, extractive and polysaccharides contents were studied to provide the basis of standard processing method for Tulipa edulis bulbus. The results showed that the treatments of sun drying and 40 °C drying showed higher rehydration ratios, but lower dry rate, higher hardness, worse color, longer time and obvious distortion and shrinkage in comparison with other drying methods. The treatments of 60 °C constant temperature drying resulted in shorter drying time, lower water and higher polysaccharides content. Drying time is shorter and appearance quality is better in the treatment of steaming and boiling compared with other treatments, but the content of extractive and polysaccharides decreased significantly. The treatments of 50 °C constant temperature drying led to similar appearance quality of bulb to commercial bulb, and it resulted in lowest hardness and highest dry rate as well as higher rehydration ratio, extractive and polysaccharides content, moderate moisture and total ash contents among these treatments. Based on the results obtained, 50 °C constant temperature drying is the better way for the processing of T. edulis bulbus.

[Effects of flower bud removal and artificial pollination on growth and yield of Tulipa edulis].

The study was conducted to explore the response of growth and yield of Tulipa edulis to flower bud removal and artificial pollination. And flower bud removal and artificial pollination were carried out in the squaring period and bloom stage respectively. The morphological index and biomass indicators were determined and the yield was counted in harvest time. Result showed that flower bud removal was beneficial to the growth of T. edulis, resulting in increasing growth index, biomass as well as the yield of bulb. The diameter and dry weight of T. edulis fruit by artificial pollination were increased significantly compared with the control. Seed setting percentage increased to 100%, and the number of seed as well as the single grain weight increased by 69.03% and 16.48%, respectively, which did not significantly affect the bulb production. In conclusion, Flower bud removal treatment accelerates bulb biomass increase, so as to improve its yield. Artificial pollination raised significantly seed setting percentage, seed number as well as the single grain weight.

Performance of Corvis ST Parameters Including Updated Stress-Strain Index in Differentiating Between Normal, Forme-Fruste, Subclinical, and Clinical Keratoconic Eyes.

PURPOSE: This study seeks to evaluate the ability of the updated stress strain index (SSIv2) and other Corvis ST biomechanical parameters in distinguishing between keratoconus at different disease stages and normal eyes. DESIGN: Diagnostic accuracy analysis to distinguish disease stages. METHODS: 1084 eyes were included and divided into groups of normal (199 eyes), forme fruste keratoconus (FFKC, 194 eyes), subclinical keratoconus (SKC, 113 eyes), mild clinical keratoconus (CKC-Ⅰ, 175 eyes), moderate clinical keratoconus (CKC-Ⅱ, 204 eyes), and severe clinical keratoconus (CKC-Ⅲ, 199 eyes). Each eye was subjected to a Corvis ST examination to determine the central corneal thickness (CCT), biomechanically corrected intraocular pressure (bIOP), SSIv2 (updated stress-strain index), and other 8 Corvis parameters including the stress-strain index (SSIv1), stiffness parameter at first applanation (SP-A1), first applanation time (A1T), Ambrósio relational thickness to the horizontal profile (ARTh), integrated inverse radius (IIR), maximum deformation amplitude (DAM), ratio between deformation amplitude at the apex and at 2 mm nasal and temporal (DARatio2), and Corvis biomechanical index (CBI). The sensitivity and specificity of these parameters in diagnosing keratoconus were analyzed through receiver operating characteristic curves. RESULTS: Before and after correction for CCT and bIOP, SSIv2 and ARTh were significantly higher and IIR and CBI were significantly lower in the normal group than in the FFKC group, SKC group and the 3 CKC groups (all P < .05). There were also significant correlations between the values of SSIv2, ARTh, IIR, CBI, and the CKC severity (all P < .05). AUC of SSIv2 was significantly higher than all other Corvis parameters in distinguishing normal eyes from FFKC, followed by IIR, ARTh and CBI. CONCLUSION: Corvis ST's updated stress-strain index, SSIv2, demonstrated superior performance in differentiating between normal and keratoconic corneas, and between corneas with different keratoconus stages. Similar, but less pronounced, performance was demonstrated by the IIR, ARTh and CBI.

Pestalopyrones A-D, four tricyclic pyrone derivatives from the endophytic fungus Pestalotiopsis neglecta S3.

Four undescribed pyrone derivatives, pestalopyrones A-D, containing unusual tricyclic 5/6/6 polycyclic skeletons, were isolated from the ethyl acetate extract of the endophytic fungus Pestalotiopsis neglecta S3 derived from the fresh stems of Rubia podantha Diels (Rubiaceae). Their planar structures were elucidated mainly by NMR and HRESIMS. Pestalopyrones A-D contained six contiguous chiral carbons, and the relative configurations of C-4, C-5, and C-8 in tricyclic 5/6/6 polycyclic skeletons were determined by ROESY spectra. For pestalopyrone B, the absolute configuration of C-16 was determined by the Mosher's method. All isolated compounds were tested for their cytotoxicity against cancer cell lines, antibacterial activity, and inhibitory effect on the lipopolysaccharide (LPS)-induced nitric oxide (NO) production, and the results showed that pestalopyrone A inhibited LPS-induced NO production with an IC50 value of 35.8 µM.

The ISApl1 2 Dimer Circular Intermediate Participates in mcr-1 Transposition.

Objectives: The mobile colistin resistance gene mcr-1 is a serious threat to global human and animal health. The composite transposon Tn6330 and its circular intermediate were proposed to be involved in the spread of mcr-1 but their roles remain poorly understood. Methods: To further explore the intermediates during the transposition of Tn6330, we engineered Escherichia coli strains that carry an intact Tn6330 transposon or its deletion derivatives. PCR assays were performed to detect IR-IR junctions and possible circular intermediates. We carried out transposition experiments to calculate transposition frequency. The transposition sites were characterized by whole genome sequence and ISMapper-based analyses. Results: The presence of an intact Tn6330 was demonstrated to be essential for the successful transposition of mcr-1, although both Tn6330 and Tn6330-ΔIR could form circular intermediates. The insertion sequence junction structure was observed in all constructed plasmids but the ISApl1 dimer was only formed in one construct containing an intact Tn6330. The average frequency of mcr-1 transposition in an E. coli strain possessing an intact Tn6330 was ∼10-6 per transformed cell. We identified 27 integration sites for the Tn6330 transposition event. All the transposition sites were flanked by 2 bp target duplications and preferentially occurred in AT-rich regions. Conclusion: These results indicate that mcr-1 transposition relies on the presence of an intact Tn6330. In addition, formation of the tandem repeat ISApl1 2 could represent a crucial intermediate. Taken together, the current investigations provide mechanistic insights in the transposition of mcr-1.