On the Structure and Reaction Mechanism of Human Acireductone Dioxygenase.

Acireductone dioxygenase (ARD) is an intriguing enzyme from the methionine salvage pathway that is capable of catalysing two different oxidation reactions with the same substrate depending on the type of the metal ion in the active site. To date, the structural information regarding the ARD-acireductone complex is limited and possible reaction mechanisms are still under debate. The results of joint experimental and computational studies undertaken to advance knowledge about ARD are reported. The crystal structure of an ARD from Homo sapiens was determined with selenomethionine. EPR spectroscopy suggested that binding acireductone triggers one protein residue to dissociate from Fe2+ , which allows NO (and presumably O2 ) to bind directly to the metal. Mössbauer spectroscopic data (interpreted with the aid of DFT calculations) was consistent with bidentate binding of acireductone to Fe2+ and concomitant dissociation of His88 from the metal. Major features of Fe vibrational spectra obtained for the native enzyme and upon addition of acireductone were reproduced by QM/MM calculations for the proposed models. A computational (QM/MM) study of the reaction mechanisms suggests that Fe2+ promotes O-O bond homolysis, which elicits cleavage of the C1-C2 bond of the substrate. Higher M3+ /M2+ redox potentials of other divalent metals do not support this pathway, and instead the reaction proceeds similarly to the key reaction step in the quercetin 2,3-dioxygenase mechanism.

Anion Effects in Oxidative Aliphatic Carbon-Carbon Bond Cleavage Reactions of Cu(II) Chlorodiketonate Complexes.

Aliphatic oxidative carbon-carbon bond cleavage reactions involving Cu(II) catalysts and O2 as the terminal oxidant are of significant current interest. However, little is currently known regarding how the nature of the Cu(II) catalyst, including the anions present, influence the reaction with O2. In previous work, we found that exposure of the Cu(II) chlorodiketonate complex [(6-Ph2TPA)Cu(PhC(O)CClC(O)Ph)]ClO4 (1) to O2 results in oxidative aliphatic carbon-carbon bond cleavage within the diketonate unit, leading to the formation of benzoic acid, benzoic anhydride, benzil, and 1,3-diphenylpropanedione as organic products. Kinetic studies of this reaction revealed a slow induction phase followed by a rapid decay of the absorption features of 1. Notably, the induction phase is not present when the reaction is performed in the presence of a catalytic amount of chloride anion. In the studies presented herein, a combination of spectroscopic (UV-vis, EPR) and density functional theory (DFT) methods have been used to examine the chloride and benzoate ion binding properties of 1 under anaerobic conditions. These studies provide evidence that each anion coordinates in an axial position of the Cu(II) center. DFT studies reveal that the presence of the anion in the Cu(II) coordination sphere decreases the barrier for O2 activation and the formation of a Cu(II)-peroxo species. Notably, the chloride anion more effectively lowers the barrier associated with O-O bond cleavage. Thus, the nature of the anion plays an important role in determining the rate of reaction of the diketonate complex with O2. The same type of anion effects were observed in the O2 reactivity of the simple Cu(II)-bipyridine complex [(bpy)Cu(PhC(O)C(Cl)C(O)Ph)ClO4] (3).

Halide-promoted dioxygenolysis of a carbon-carbon bond by a copper(II) diketonate complex.

A mononuclear Cu(II) chlorodiketonate complex was prepared, characterized, and found to undergo oxidative aliphatic carbon-carbon bond cleavage within the diketonate unit upon exposure to O2 at ambient temperature. Mechanistic studies provide evidence for a dioxygenase-type C-C bond cleavage reaction pathway involving trione and hypochlorite intermediates. Significantly, the presence of a catalytic amount of chloride ion accelerates the oxygen activation step via the formation of a Cu-Cl species, which facilitates monodentate diketonate formation and lowers the barrier for O2 activation. The observed reactivity and chloride catalysis is relevant to Cu(II) halide-catalyzed reactions in which diketonates are oxidatively cleaved using O2 as the terminal oxidant. The results of this study suggest that anion coordination can play a significant role in influencing copper-mediated oxygen activation in such systems.

On the catalytic mechanism of (S)-2-hydroxypropylphosphonic acid epoxidase (HppE): a hybrid DFT study.

The mechanism of oxidative epoxidation catalyzed by HppE, which is the ultimate step in the biosynthesis of fosfomycin, was studied by using hybrid DFT quantum chemistry methods. An active site model used in the computations was based on the available crystal structure for the HppE-Fe(II)-(S)-HPP complex and it comprised first-shell ligands of iron as well as second-shell polar groups interacting with the substrates. The reaction energy profiles were constructed for three a priori plausible mechanisms proposed in the literature, and it was found that the most likely scenario for the native substrate, that is, (S)-HPP, involves generation of the reactive Fe(III)-O·/Fe(IV)=O species, which is responsible for the C-H bond-cleavage. At the subsequent reaction stage, the OH-rebound, which would lead to a hydroxylated product, is prevented by a fast protonation of the OH ligand and, as a result, ring closure is the energetically preferred step. For the R enantiomer of the substrate ((R)-HPP), which is oxidized to a keto product, comparable barrier heights were found for the C-H bond activation by both the Fe(III)-O(2)· and Fe(IV)=O species.

Inactivation and aggregation of R-specific 1-(4-hydroxyphenyl)-ethanol dehydrogenase from Aromatoleum aromaticum.

R-specific 1-(4-hydroxyphenyl)-ethanol dehydrogenase (R-HPED) is a promising biotool for stereoselective synthesis of chiral aromatic alcohols. This work focused on the evaluation of its stability under storage and in-process conditions in the pH range from 5.5 to 8.5. The relationship between the dynamics of aggregation and activity loss under various pH conditions and in the presence of glucose, serving as a stabilizer, was analysed using spectrophotometric techniques and dynamic light scattering. pH 8.5 was indicated as a representative environment in which the enzyme, despite relatively low activity, shows high stability and the highest total product yield. Based on a series of inactivation experiments, the mechanism of thermal inactivation at pH 8.5 was modelled. The irreversible first-order mechanism of R-HPED inactivation in the temperature range of 47.5-60 °C was verified by isothermal and multi-temperature evaluation of data, confirming that in the alkaline pH 8.5, R-HPED aggregation is the secondary process occurring at already inactivated protein molecules. The rate constants were from 0.029 min-1 to 0.380 min-1 for a buffer solution but they decreased to 0.011 min-1 and 0.161 min-1, respectively, when 1.5 M glucose was added as a stabilizer. The activation energy was however about 200 kJ mol-1 in both cases.

The alkenyl migration mechanism catalyzed by extradiol dioxygenases: a hybrid DFT study.

6-Hydroxymethyl-6-methylcyclohexa-2,4-dienone is a mechanistic probe which when incubated with an extradiol dioxygenase yields a 2-tropolone product. This observation was originally interpreted as evidence supporting a direct heterolytic 1,2-alkenyl migration mechanism for a ring expansion reaction catalyzed by this class of Fe(II)-dependent nonheme enzymes (Xin and Bugg in J Am Chem Soc 130:10422-10430, 2008). In the work reported in this contribution we used quantum chemical methods to test whether such a mechanism is energetically possible and we found that it is not, neither for the mechanistic probe nor for the native catalytic cycle intermediate. Models of increasing complexity were used to calculate energy barriers to the heterolytic 1,2-alkenyl migration and alternative radical mechanisms. It was found that the former involves substantially higher barriers than the latter. A tentative radical mechanism that accounts for the transformation of the probe substrate to 2-tropolone was also proposed, and it involves acceptable barriers.

A study on the structure, mechanism, and biochemistry of kanamycin B dioxygenase (KanJ)-an enzyme with a broad range of substrates.

Kanamycin A is an aminoglycoside antibiotic isolated from Streptomyces kanamyceticus and used against a wide spectrum of bacteria, including Mycobacterium tuberculosis. Biosynthesis of kanamycin involves an oxidative deamination step catalyzed by kanamycin B dioxygenase (KanJ), thereby the C2' position of kanamycin B is transformed into a keto group upon release of ammonia. Here, we present for the first time, structural models of KanJ with several ligands, which along with the results of ITC binding assays and HPLC activity tests explain substrate specificity of the enzyme. The large size of the binding pocket suggests that KanJ can accept a broad range of substrates, which was confirmed by activity tests. Specificity of the enzyme with respect to its substrate is determined by the hydrogen bond interactions between the methylamino group of the antibiotic and highly conserved Asp134 and Cys150 as well as between hydroxyl groups of the substrate and Asn120 and Gln80. Upon antibiotic binding, the C terminus loop is significantly rearranged and Gln80 and Asn120, which are directly involved in substrate recognition, change their conformations. Based on reaction energy profiles obtained by density functional theory (DFT) simulations, we propose a mechanism of ketone formation involving the reactive FeIV  = O and proceeding either via OH rebound, which yields a hemiaminal intermediate or by abstraction of two hydrogen atoms, which leads to an imine species. At acidic pH, the latter involves a lower barrier than the OH rebound, whereas at basic pH, the barrier leading to an imine vanishes completely. DATABASES: Structural data are available in PDB database under the accession numbers: 6S0R, 6S0T, 6S0U, 6S0W, 6S0V, 6S0S. Diffraction images are available at the Integrated Resource for Reproducibility in Macromolecular Crystallography at http://proteindiffraction.org under DOIs: 10.18430/m36s0t, 10.18430/m36s0u, 10.18430/m36s0r, 10.18430/m36s0s, 10.18430/m36s0v, 10.18430/m36s0w. A data set collection of computational results is available in the Mendeley Data database under DOI: 10.17632/sbyzssjmp3.1 and in the ioChem-BD database under DOI: 10.19061/iochem-bd-4-18.

On the reaction mechanism of an endoperoxide ring formation by fumitremorgin B endoperoxidase. The right arrangement makes a difference.

Fumitremorgin B endoperoxidase (FtmF) belongs to 2-oxoglutarate dependent dioxygenases and catalyzes an unusual oxidative reaction of endoperoxide formation at the final stage of biosynthesis of verruculogen - a mycotoxin produced by Aspergillus and Penicillinum strains. The published crystal structure of FtmF (PDB: ), which is of overall good quality, contains a model of the substrate bound in the active site, which, however, has very low occupancy and its conformation does not comply with the small molecule crystal structure. Moreover, a previous computational study that employed a model based on this crystal structure revealed a substantial reaction barrier, which might indicate that the model of FtmF/substrate complex can have serious errors. The purpose of this work was to model with computational methods the structure of the enzyme-substrate complex and to investigate the mechanisms of the enzymatic reaction. Docking, molecular dynamics simulation and DFT results, all indicate the substrate most likely binds in the active site in a configuration very different from that originally suggested. Moreover, for this newly proposed structure of the enzyme-substrate complex, the reaction energy profile is characterised exclusively by low barriers and it successfully explains the observed regiospecificity of the enzymatic process. Finally, a plausible binding site for ascorbate was found and it is suggested that ascorbate is involved in the final step of the FtmF reaction.

Reaction mechanism between Cu(II)-enolate complex and O2 as a test case for methodology used in DFT computational studies.

The reaction mechanism of an intricate oxidation reaction of chlorodiketonate ligand of mononuclear Cu(II) complex was studied computationally employing five different models that differ in: a) basis set, b) the way that solvent corrections are included, and c) DFT functional. Qualitative and quantitative comparison of structures and enthalpy reaction profiles enabled us to assess how sensitive they are to the changes in computational methodology. Graphical abstract Comparison of enthalpy reaction profiles and molecular structures demonstrate how the qualitative picture on Cu(II)-catalyzed reaction changes upon variation of computational methodology.

Instability of 2,2-di(pyridin-2-yl)acetic acid. Tautomerization versus decarboxylation.

The DFT calculations at the B3LYP level with 6-311G** basis set were carried out in order to reveal whether tautomerization or decarboxylation is responsible for the instability of 2,2-di(pyridin-2-yl)acetic (DPA) and 1,8-diazafluorene-9-carboxylic (DAF) acids. The carboxyl protons in both compounds are involved in the intramolecular hydrogen bonds (the pyridine nitrogen atoms are the hydrogen bond acceptors). Although formation of two intramolecular OH · · · N hydrogen bonds in the enols of both carboxylic acids enables effective electron delocalization within the quasi rings (· · · HO - C = C - C = N), only ene-1,1-diol of DAF has somewhat lower energy than DAF itself (ΔE is ca. 7 kcal mol(-1)). DPA and its enediol have comparable energies. Migration of the methine proton toward the carbonyl oxygen atom (to form enediols) requires overstepping the energy barriers of 55-57 kcal mol(-1) for both DPA and DAF. The enaminone tautomers of the acids, formed by migration of this proton toward the pyridine nitrogen atom, are thermodynamically somewhat more stable than the respective enediols. The energy barriers of these processes are equal to ca. 44 and 62 kcal mol(-1) for DPA and DAF, respectively. Thus, such tautomerization of the acids is not likely to proceed. On the other hand, the distinct energetic effects (ca. 15 kcal mol(-1)) favor decarboxylation. This process involves formation of (E)-2-(pyridin-2(1H)-ylidenemethyl)pyridine and its cyclic analogue followed by their tautomerization to (dipyridin-2-yl)methane and 1,8-diazafluorene, respectively. Although the later compound was found to be somewhat thermodynamically more stable, kinetic control of tautomerization of the former is more distinct.