RESUMO
BACKGROUND: The association between oral food intake and oral function during the subacute stage of stroke is not well known. OBJECTIVE: To investigate (1) oral function changes in subacute stroke patients and (2) association between oral function and oral intake status at several time points. METHODS: In a prospective study involving 324 stroke patients at a convalescent rehabilitation unit, four oral function parameters (maximum tongue pressure, MTP; lip-tongue motor function, LTMF; maximum occlusal force, MOF and oral health assessment tool, OHAT) were quantitatively measured upon admission (T0), at 1 month (T1) and 2 months (T2). Oral feeding status was assessed using the Functional Oral Intake Scale (FOIS) and divided based on the FOIS score into the dysphagic and regular diet groups. The changes in oral functions at the three time points were tested using generalized estimating equation analysis. The association between FOIS groups and oral functions at T1 and T2 was analysed by means of logistic regression analysis. RESULTS: All oral function parameters improved significantly over time during the hospital stay (mean differences: 4.9 for MTP, 0.6 for LTMF, 1.1 for MOF and -1.8 for OHAT). The FOIS groups were significantly associated with MTP (p < .05) and OHAT (p < .05) at both T1 and T2. CONCLUSION: Our findings suggest that oral function significantly improves in patients during subacute stroke rehabilitation and better oral health can be associated with better oral intake. Improved oral function through dental intervention and oral rehabilitation may contribute to gains in oral food intake.
Assuntos
Ingestão de Alimentos , Saúde Bucal , Reabilitação do Acidente Vascular Cerebral , Acidente Vascular Cerebral , Humanos , Estudos Prospectivos , Masculino , Feminino , Acidente Vascular Cerebral/fisiopatologia , Acidente Vascular Cerebral/complicações , Reabilitação do Acidente Vascular Cerebral/métodos , Pessoa de Meia-Idade , Idoso , Ingestão de Alimentos/fisiologia , Recuperação de Função Fisiológica/fisiologia , Língua/fisiopatologia , Transtornos de Deglutição/fisiopatologia , Transtornos de Deglutição/reabilitaçãoRESUMO
BACKGROUND: Differences in the effects of cream-type denture adhesives and home liners remain unclear. OBJECTIVE: This cross-sectional study aimed to clarify the differences in the oral-hygiene status and masticatory performance between participants using cream-type denture adhesives and those using home liners. METHODS: Masticatory performance with and without cream-type denture adhesives and home liners was evaluated using colour-changeable chewing gum. Oral hygiene was assessed using the tongue coating index (TCI). Propensity-score matching was performed using oral moisture, presence of palatal or mandibular protuberances, type of residual ridge, denture type (complete or partial denture), and denture retention as background factors. Wilcoxon signed-rank test was used to examine the differences in masticatory performance with and without cream-type denture adhesives and home liners and differences in masticatory performance and TCI between the cream-type denture adhesive and home-liner groups. RESULTS: This study included 38 and 40 cream-type adhesive and home-liner users, respectively, and 17 pairs were obtained after propensity-score matching. The Wilcoxon signed-rank tests showed that masticatory performance was significantly different with and without the use of home liners, and higher values were obtained with the use of home-liners. However, the cream-type denture adhesive and home-liner groups showed no significant differences in terms of the change in masticatory performance with the use of them. Furthermore, Wilcoxon signed-rank tests showed that TCI values were significantly high in the cream-type adhesive group. CONCLUSION: The findings in this study suggest that home liners improve masticatory performance and that participants regularly using cream-type denture adhesives have poorer oral hygiene.
RESUMO
OBJECTIVE: As the participation of dental professionals in multidisciplinary care is often limited, instructions on oral health management provided by dental professionals to other professionals are important to achieve transdisciplinary oral health management; however, the effectiveness of such instructions remains unclear. In this longitudinal study, we aimed to determine the impact of oral health management provided by dental professionals and nurses instructed on oral health management by dental professionals on the oral health of inpatients eligible for a Nurition Support Team (NST). METHODS: The study participants were 117 patients (66 men and 51 women, mean age: 71.9 ± 12.5 years) who received oral health management during the NST intervention period. The participants received oral health management from nurses (Ns group) or dental professionals (D group). The nurses who conducted the oral health management received instructions from dental professionals. Oral health was assessed at the beginning and end of the NST intervention using the Oral Health Assessment Tool (OHAT). RESULT: The Ns and D groups showed significant improvements in the total OHAT scores at the end of the NST intervention. Both groups showed significant improvements in the OHAT subitems of lip, tongue, gums and tissues, saliva, oral cleanliness and dental pain, while only the D group showed a significant improvement in the denture subitem. CONCLUSION: Effective oral health management provided by dental professionals or by nurses trained by them improved the oral health status of inpatients eligible for NST at an acute-care hospital.
Assuntos
Saúde Bucal , Humanos , Feminino , Masculino , Estudos Longitudinais , Idoso , Pessoa de Meia-Idade , Equipe de Assistência ao Paciente , Pacientes Internados , Higiene Bucal , Odontólogos/psicologia , Enfermeiras e EnfermeirosRESUMO
INTRODUCTION: Oral hypofunction comprises seven aspects of oral condition, including oral hygiene, oral dryness, bite strength, tongue-lip motor function, tongue pressure, masticatory function, and swallowing function. Each of these seven has a single diagnostic criterion; however, the use of a single indicator without consideration of sex, age, or other factors is controversial. The purpose of this study was to evaluate the association between the oral hypofunction test and sex, age, and number of remaining teeth. METHODS: The study was conducted at 12 facilities by the members of the Japanese Society of Geriatric Dentistry during April to December 2019. The participants comprised 181 healthy older adults aged 65 years and over (56.9% female; age range 65-95 years) who regularly visited these facilities. All tests of oral function and oral status available in Japan were performed on the participants, and the association between these tests and sex, age, and number of remaining teeth was examined. RESULTS: Sex differences were observed in masticatory function, bite force, lip closure force, jaw-opening force, oral diadochokinesis "ka," and tongue coating index (p < .05). In men, age was weakly (r = 0.20-0.40) associated with masticatory function, jaw-opening force, maximum tongue pressure, oral diadochokinesis, and swallowing function. In women, the number of remaining teeth, masticatory function, jaw-opening force, and oral diadochokinesis "ta" and "ka" was also weakly associated with age. CONCLUSIONS: Performance on the oral hypofunction test differs by sex, age, and number of remaining teeth. This means that the current single criterion for evaluation requires caution in its interpretation.
RESUMO
OBJECTIVES: To investigate factors influencing postoperative bleeding occurrence after dental extraction in older patients receiving anticoagulation therapy. MATERIALS AND METHODS: This retrospective study included patients aged ≥ 65 years receiving one of the following anticoagulants: apixaban, edoxaban, rivaroxaban, and warfarin. Patients who underwent one to multiple tooth extractions in the geriatric dentistry clinic at Tokyo Medical and Dental University Hospital between August 1, 2016, and November 30, 2020, were included. The outcome variable was postoperative bleeding occurrence. Logistic regression analysis was performed with the following ten factors as explanatory variables: age, sex, maximum systolic blood pressure during the extraction, type of local anesthesia, vertical incision, osteotomy, usage of surgical splints, the mesiodistal width of the extracted tooth on a radiograph, use of antiplatelet agents, and history of diabetes requiring medication. RESULTS: Among 395 participants (mean age, 82.3 ± 6.5 years) included in this study, 75 patients experienced postoperative bleeding after tooth extraction. Logistic regression analysis revealed that the odds ratios for the vertical incision (18.400, p < 0.001), osteotomy (3.630, p = 0.00558), usage of surgical splints (1.860, p = 0.0395), and the mesiodistal width of the extracted tooth on a radiograph (1.060, p = 0.0261) were statistically significant. CONCLUSIONS: For dental extraction in older patients receiving anticoagulants, postoperative bleeding is more likely to occur in patients with vertical incision, osteotomy, and posterior or multiple tooth extractions. CLINICAL RELEVANCE: Dentists should consider suturing and adjunctive hemostatic procedures for patients undergoing vertical incision, osteotomy, and multiple tooth extractions while receiving anticoagulation therapy to minimize the risk of postoperative bleeding.
Assuntos
Exostose , Hemorragia Pós-Operatória , Humanos , Idoso , Idoso de 80 Anos ou mais , Estudos Retrospectivos , Assistência Odontológica , Varfarina , Anticoagulantes/uso terapêuticoRESUMO
BACKGROUND: Coordination between the trunk and head is considered important for walking stability. Recent studies have reported that wearing complete dentures could improve trunk stability during walking; however, its effect on the head has not been clarified. OBJECTIVE: This study aimed to clarify the effect of complete dentures on head stability during walking in edentulous older adults. METHODS: Twenty edentulous older adults (11 men and 9 women; mean age, 78.6 ± 5.8 years) who used complete dentures were included in the study. Acceleration and angle rate sensors were placed on the participants' brow, chin and waist, and they were asked to walk a 20-m passage under two conditions: with and without dentures. The outcomes used to assess head stability were the variance values of acceleration and angle rate, the peak-to-peak values, harmonic ratio, root mean square, integrated values of the difference and dynamic time warping data obtained from the sensors. The variance values of the brow acceleration were compared using a paired t-test, and other outcomes were compared using a Wilcoxon signed-rank test. All significance levels were set at 5%. RESULTS: In acceleration without dentures, the variance values of the chin and the peak-to-peak values of the brow and chin were significantly larger than with dentures. Angle rate without dentures, the variance values and the peak-to-peak values of the brow and chin were also significantly larger than with dentures. CONCLUSION: Wearing complete dentures while walking might improve head stability and contribute to walking stability in edentulous older adults.
Assuntos
Prótese Total , Boca Edêntula , Masculino , Humanos , Feminino , Idoso , Idoso de 80 Anos ou mais , CaminhadaRESUMO
BACKGROUND: Oral health management involving dental professionals in a multidisciplinary Nutritional Support Team (NST) is effective collaborative care. However, the indicators for the triage of oral health management requirements and selection of oral healthcare providers remain unclear. OBJECTIVE: This cross-sectional study included inpatients with malnutrition and aimed to investigate the factors associated with determining the need for oral health management involving dental professionals and selecting primary oral healthcare providers when needed. METHODS: Participants included 255 inpatients (154 males and 101 females, mean age 69.7 ± 14.4 years) aged ≥20 years who underwent oral assessment by the NST between April 2016 and July 2019. Participants were assigned to the following groups: good oral health group, oral health management by nurses under the supervision of dental professionals group, and oral health management by dental professionals group. The comprehensive oral health status was investigated using the Oral Health Assessment Tool (OHAT). The total OHAT score ranges from 0 to 16, with a higher score indicating a poorer oral environment. RESULTS: The total OHAT score had a significant correlation with the need for oral health management by dental professionals. Inpatients with denture problems required oral health management from dental professionals. The optimal cutoff value of the total OHAT score for determining the need for oral health management was four. CONCLUSION: The need for oral health management by dental professionals increased with worsening oral health status, especially denture problems. The OHAT score could be used to triage inpatients who require oral health management collaborated with dental professionals.
Assuntos
Pacientes Internados , Desnutrição , Masculino , Feminino , Humanos , Pessoa de Meia-Idade , Idoso , Idoso de 80 Anos ou mais , Estudos Transversais , Saúde Bucal , Desnutrição/terapia , Apoio Nutricional , Pessoal de SaúdeRESUMO
PURPOSE: Maintenance of oral feeding is important in terms of maintaining and improving the quality of life in terminal cancer patients receiving palliative care. Although adequate oral health status is essential for oral feeding in hospitalized patients, the relationship between oral health and oral feeding in patients receiving palliative care remains unclear. This cross-sectional study aimed to examine how the general condition and oral health status of these patients relate to decisions regarding their nutritional intake methods. METHODS: This retrospective cross-sectional study included 103 terminal cancer patients (59 men and 44 women; mean age, 73.8 ± 10.9 years) who received palliative care between April 2017 and August 2019. The nutritional method was assessed using the Functional Oral Intake Scale (FOIS). We assessed two types of nutritional methods: (1) the method advised by the attending physician until the initial dental examination (FOIS-I) and (2) the recommended method based on consultation with a palliative care doctor and dentist after the initial oral examination (FOIS-R). Furthermore, the participants' basic information and Dysphagia Severity Scale (DSS) and Oral Health Assessment Tool (OHAT) scores were assessed. RESULTS: There was a divergence between FOIS-I and FOIS-R. FOIS-R was significantly higher than FOIS-I (p < 0.001). Multiple regression analysis revealed that the time until death, DSS score, and OHAT score had a significant impact on determining the food form for oral feeding. CONCLUSIONS: Appropriate oral health assessment is important in determining the food form and indication for oral feeding among patients receiving palliative care.
Assuntos
Transtornos de Deglutição , Neoplasias , Idoso , Idoso de 80 Anos ou mais , Estudos Transversais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Neoplasias/terapia , Saúde Bucal , Cuidados Paliativos , Qualidade de Vida , Estudos RetrospectivosRESUMO
PURPOSE: Patients with terminal cancer undergoing multidisciplinary palliative care often have oral health problems, but these details are still unclear. This cross-sectional study aimed to elucidate the oral health of patients with terminal-stage cancer who are inpatient recipients of acute-phase palliative care, and to unveil the factors affecting their oral health. METHODS: Participants were 121 patients with terminal-stage cancer (68 males, 53 females, mean age: 73.6 ± 11.1 years) and oral health complaints. They received palliative care at Tokyo Medical and Dental University Medical Hospital between April 2017 and August 2019. Their demographic and medical details were extracted, retrospectively, from their medical records, and their oral health status, such as the number of natural teeth, removable denture usage, Oral Health Assessment Tool (OHAT), and Dysphagia Severity Scale, were evaluated. All outcomes were assessed by a dentist from the palliative care team. RESULTS: The problems with soft tissue, saliva, and oral cleanliness were observed. The absence of posterior occlusal support was common, and the use of removable dentures was often inadequate. In contrast, swallowing function was relatively well-conserved and 46.3% of the participants were capable of nutrition intake solely by mouth. Multiple regression analysis revealed a significant association between total OHAT score and age, consciousness level, prognostic level, and method of nutritional intake. CONCLUSION: The results revealed that the oral health of terminal cancer patients under palliative care declined despite receiving routine oral care from nurses, and suggest the importance of including dental professionals in multidisciplinary palliative care.
Assuntos
Neoplasias , Saúde Bucal , Idoso , Idoso de 80 Anos ou mais , Estudos Transversais , Feminino , Humanos , Pacientes Internados , Masculino , Pessoa de Meia-Idade , Neoplasias/terapia , Cuidados Paliativos , Estudos RetrospectivosRESUMO
OBJECTIVES: This prospective study aimed to compare the oral functions of removable partial dentures (RPDs) with those of implant-assisted removable partial dentures (IARPDs) with short implants and magnetic attachments in patients with mandibular Kennedy class I and II. MATERIAL AND METHODS: Thirty participants with mandibular Kennedy class I or II and at least three distal missing teeth were recruited. Oral functions, including mixing ability, comminuting ability, maximum bite force, and occlusal contact area, were assessed for RPDs (stage 0), IARPDs with healing caps (stage 1), and IARPDs with magnetic attachments (stage 2). The implants were loaded with occlusal force in stages 1 and 2. Finally, the data of the 27 participants who completed the evaluation at stage 2 were analyzed. The Wilcoxon signed-rank test with Bonferroni correction was used to assess the differences in the oral functions among the different stages. RESULTS: The implant survival rate was 93.8%. There were significant differences in the comminuting ability and occlusal contact area between stages 0 and 2 (p < .001 and p = .036, respectively) and stages 1 and 2 (p = .003 and p = .015, respectively). Regarding the maximum bite force, there was a significant difference between stages 1 and 2 (p = .018). However, there was no significant difference in the mixing ability between the three stages. CONCLUSIONS: Within the limitations of this study, it was concluded that IARPDs in the mandible with short implants and magnetic attachments may improve oral functions.
Assuntos
Prótese Parcial Removível , Saúde Bucal , Qualidade de Vida , Humanos , Fenômenos Magnéticos , Estudos Prospectivos , Satisfação do Paciente , Resultado do TratamentoRESUMO
INTRODUCTION: Jaw-opening force (JOF) can be a potential screening tool for dysphagia. However, confounding variables such as comorbidities or physical and oral functions that are associated with the physiology of swallowing have not previously been examined. Adjusting for these variables could reveal the relationship between JOF and dysphagia and indicate whether JOF is an independent factor associated with dysphagia. We therefore aimed to assess the efficacy of using JOF for dysphagia screening in this multi-institutional study. METHODS: Community-dwelling older adults over the age of 65 years (N = 403) who visited the university dental hospitals and participated in health surveys (mean age ± standard deviation, 77.1 ± 7.0 years; range, 65-96 years) between November 2018 and January 2020 were included in this study. The JOFs of all participants were measured. The measured JOF was compared with the presence of dysphagia, which was defined using the Functional Oral Intake Scale and the Eating Assessment Tool-10. RESULTS: Multiple logistic regression analysis revealed that the presence of dysphagia was independently associated with JOF, calf circumference, and dependence after adjusting for age and sex. DISCUSSION/CONCLUSION: Decreased JOF can be a risk factor for dysphagia in older adults.
Assuntos
Transtornos de Deglutição , Humanos , Idoso , Transtornos de Deglutição/diagnóstico , Estudos Transversais , Força Muscular/fisiologia , Deglutição/fisiologia , Vida IndependenteRESUMO
INTRODUCTION: Oral frailty describes a trivial decline in the oral function and is considered to be related to frailty. Thus, effective management of oral frailty could prevent or ameliorate physical frailty and the need for care. However, there is a lack of consensus regarding specific interventions for oral frailty. In this cluster-randomized controlled trial, we investigated the effects of a newly developed oral frailty measures program mentored by dentists and dental hygienists for elderly people in a clinical setting. METHODS: Of 3,296 participants included in a field survey, 219 who regularly visited dental clinics and met at least 3 of the following 6 criteria for oral frailty were considered eligible: <20 natural teeth, decreased chewing ability, decreased articulatory oral-motor skills, decreased tongue pressure, and substantial subjective difficulties in eating and swallowing. After applying the inclusion and exclusion criteria, we studied 51 patients in the intervention group (14 men and 37 women; mean age, 78.6 years) and 32 patients in the control group (7 men and 25 women; mean age, 78.0 years). We implemented a 12-week oral frailty measures program only for the intervention group. The program included preparatory oral exercises, mouth-opening training, tongue pressure training, prosodic training, and masticatory training. Primary outcome measures were the chewing ability score, articulatory oral motor skill for /ta/, tongue pressure, subjective difficulty in eating tough foods, and subjective difficulty in swallowing. We compared baseline characteristics using the Mann-Whitney U and χ2 tests for continuous and categorical variables, respectively. A repeated-measures two-way ANOVA was used to determine the efficacy of independent intervention variables, following the Wilcoxon signed-rank test. The groups (intervention/control) and time (baseline/week 12) were the independent variables. Oral frailty measures were the dependent variables. RESULTS: Baseline characteristics and assessment results were similar between groups. We observed significant improvements in the intervention group in terms of articulatory oral motor skill for /ta/ and tongue pressure (p < 0.001). No improvements were observed in the control group. DISCUSSION/CONCLUSION: Our results suggest that our oral frailty measures program effectively alleviates oral frailty. Future studies are needed to clarify the impact on preventing physical frailty and improving the nutritional status.
Assuntos
Fragilidade , Idoso , Feminino , Idoso Fragilizado , Fragilidade/prevenção & controle , Humanos , Vida Independente , Masculino , Estado Nutricional , Pressão , LínguaRESUMO
Photopolymer resins are widely used in the production of dental prostheses, but their mechanical properties require improvement. We evaluated the effects of different zirconia filler contents and printing directions on the mechanical properties of photopolymer resin. Three-dimensional (3D) printing was used to fabricate specimens using composite photopolymers with 0 (control), 3, 5, and 10 wt.% zirconia filler. Two printing directions for fabricating rectangular specimens (25 mm × 2 mm × 2 mm) and disk-shaped specimens (φ10 mm × 2 mm) were used, 0° and 90°. Three-point bending tests were performed to determine the flexural strengths and moduli of the specimens. The Vickers hardness test was performed to determine the hardness of the specimens. Tukey's multiple comparison tests were performed on the average values of the flexural strengths, elastic moduli, and Vickers hardness after one-way ANOVA (α = 0.05). The flexural strengths and elastic moduli at 0° from high to low were in the order of 0, 3, 10, and 5 wt.%, and those at 90° were in the order of 3, 0, 10, and 5 wt.% (p < 0.05). For 5 and 10 wt.%, no significant differences were observed in mechanical properties at 0° and 90° (p < 0.05). The Vickers hardness values at 0° and 90° from low to high were in the order of 0, 3, 5, and 10 wt.% (p < 0.05). Within the limits of this study, the optimal zirconia filler content in the photopolymer resin for 3D printing was 0 wt.% at 0° and 3 wt.% at 90°.
Assuntos
Resinas Compostas/química , Polímeros/química , Resinas Sintéticas/química , Módulo de Elasticidade , Dureza , Teste de Materiais/métodos , Estresse Mecânico , Propriedades de Superfície , Zircônio/químicaRESUMO
STATEMENT OF PROBLEM: Studies on the movement of artificial teeth during the manufacturing of computer-aided design and computer-aided manufacturing (CAD-CAM) complete dentures using the custom disk method with milled recesses and on whether the movement is within a clinically acceptable range are lacking. PURPOSE: The purpose of this in vitro study was to assess the trueness and precision of the artificial teeth on custom disks the recesses of which were manufactured using a milling machine and to compare the results with the recesses manufactured using a 3-dimensional (3D) printer. MATERIAL AND METHODS: Four types of artificial teeth (maxillary left central incisors [Max-L1], mandibular left central incisors [Man-L1], maxillary left first premolars [Max-L4], and maxillary left first molars [Max-L6]) were prepared. Milling data were created, and 3 of each type of tooth were attached to each disk made up of 3 concentric circles (large, medium, and small). Five each of the 3D-printed custom disks and custom disks with milled recesses were milled based on the milling data. Standard tessellation language data were obtained through cone beam computed tomography and superimposed by using a CAD software program. Mean absolute error (MAE) values were calculated to assess trueness and precision; MAE values of artificial teeth in custom disks with milled recesses and 3D-printed custom disks were statistically compared by using the 2-way analysis of variance test with 2 factors, 2 types of custom disks and 4 types of artificial teeth, and the Tukey post hoc comparison (α=.05). RESULTS: Regarding position trueness, the MAE value of Man-L1 on the milling custom disk was significantly lower than that of the 3D-printed custom disk (P<.001), whereas the MAE values of Max-L4 and Max-L6 on the milling custom disk were significantly higher than those on the 3D-printed custom disk (P<.001). No significant difference was found in the MAE value of the position trueness of Max-L1 between the milling and 3D-printed custom disks. Regarding position precision, the MAE values of Max-L1, Man-L1, and Max-L4 on the milling custom disk were significantly lower than those on the 3D-printed custom disks (P=.002, P<.001, P=.025, respectively). However, no significant difference was seen in the MAE value of position precision of Max-L6 between the milling and 3D-printed custom disks (P=.180) CONCLUSIONS: Movement of artificial teeth during the manufacture of dentures using the custom disk method and custom disks with milled recesses was within a clinically acceptable range.
RESUMO
STATEMENT OF PROBLEM: Stereolithography (SLA) additive manufacturing (AM) technologies have become popular for the fabrication of complete dentures; however, the trueness and precision of the dentures under different postpolymerization conditions remain unclear. PURPOSE: The purpose of this in vitro study was to investigate the effect of different postpolymerization times and temperatures on the trueness and precision of SLA dentures. MATERIAL AND METHODS: Specimens simulating maxillary complete dentures were fabricated by SLA 3D printing. They were polymerized for 15 minutes or 30 minutes at different temperatures (40 °C, 60 °C, and 80 °C). The intaglio surface trueness of the specimens was evaluated by superimposing the postpolymerization standard tessellation language (STL) file on the original STL file for each specimen via a best-fit method (n=10). The precision was measured across specimens by superimposing the postpolymerization STL file from each specimen group and using the combination formula (n=45). Subsequently, root-mean-square estimates (RMSEs) and color map data were obtained, and a normality test was conducted on the obtained data. The results indicated that the distributions were not normal; therefore, nonparametric Kruskal-Wallis and Mann-Whitney tests were used to analyze the data (α=.05). RESULTS: For trueness, the lowest RMSE corresponded to the postpolymerization time of 30 minutes and a temperature of 40 °C. This result was significantly different from specimens those of the 15-minute and 60 °C, 15-minute and 80 °C, and 30-minute and 80 °C specimens (P<.001). For precision, the median of the lowest RMSE corresponded to the 30-minute and 40 °C specimens. This median value was significantly different from those of other specimens (P<.001). The findings indicate that the postpolymerization condition of 30 minutes and 40 °C affords the highest trueness and precision and the most favorable intaglio surface adaptation of the denture. CONCLUSIONS: The postpolymerization conditions influenced the RMSE values of the trueness and precision of a clear photopolymer resin. The RMSE and color map data associated with the 30-minute and 40 °C condition corresponded to the greatest trueness and precision of all the SLA denture specimens considered.
Assuntos
Desenho Assistido por Computador , Estereolitografia , Prótese Total , Maxila , Impressão TridimensionalRESUMO
STATEMENT OF PROBLEM: Insufficient information is available regarding the trueness and precision of artificial teeth in computer-aided design and computer-aided manufacturing (CAD-CAM) milled complete dentures fabricated from custom disks, including prefabricated teeth. PURPOSE: The purpose of this in vitro study was to determine the trueness and precision of the position of the artificial teeth arranged in CAD-CAM milled complete dentures manufactured by using a custom disk method and to compare the trueness and precision of different tooth types and the occlusal surface and entire surface of the teeth. MATERIAL AND METHODS: The milling data were designed by using a CAD software program. Four types of artificial teeth (maxillary-left central incisor, mandibular-left central incisor, maxillary-left first premolar, and maxillary-left first molar) were arranged concentrically in the disk with 3 corresponding teeth per disk. Five custom disks were milled based on the milling data. The sample size for maxillary-left central incisor, mandibular-left central incisor, maxillary-left first premolar, and maxillary-left first molar was 15. The standard tessellation language data were obtained by scanning the milled disks with cone beam computed tomography. The obtained data were superimposed by using a CAD software program to assess the trueness and precision of the tooth positions. For the occlusal surface, the data were superimposed after trimming to assess the trueness and precision of the tooth position with respect to the entire tooth surface. After data superimposition, the deviation was analyzed by using a 3-dimensional analysis software program to obtain the mean absolute error values and color maps. The data were analyzed by using 2-way ANOVA and the Games-Howell post hoc test (α=.05). RESULTS: Significant differences were found in the mean absolute error values of the position trueness of the entire surface between the different teeth, except for maxillary-left first premolar and maxillary-left first molar (P<.05). Moreover, significant differences in the mean absolute error values of the precision for the entire surface were observed between mandibular-left central incisor and maxillary-left first premolar, as well as between mandibular-left central incisor and maxillary-left first molar (P<.05). The mean absolute error values of the position trueness of the occlusal surface were significantly smaller than those for the entire tooth surface for mandibular-left central incisor, maxillary-left first premolar, and maxillary-left first molar (P<.05). Finally, the mean absolute error values of the position precision of the occlusal surface were significantly smaller than those for the entire tooth surface for mandibular-left central incisor and maxillary-left first premolar (P<.05). CONCLUSIONS: The trueness and precision of the posterior teeth were higher than that of anterior teeth. The trueness of the movement of the artificial teeth during the manufacturing of dentures by using the custom disk method was found to be within a clinically acceptable range.
Assuntos
Prótese Total , Dente Artificial , Desenho Assistido por Computador , Dente Pré-MolarRESUMO
A digital complete denture was manufactured from a disk customized for each patient. The custom disk was made of resin and contained prefabricated artificial teeth. Both the denture base and the artificial teeth in the custom disk were milled in this technique, resulting in dentures with a high bond strength between the artificial teeth and denture base, excellent esthetics because of the prefabricated artificial teeth, and accurate occlusion because of the custom occlusal surface.
Assuntos
Estética Dentária , Dente Artificial , Desenho Assistido por Computador , Prótese Total , HumanosRESUMO
STATEMENT OF PROBLEM: The custom disk is a novel method of complete denture fabrication; however, patient-reported outcomes and fabrication costs are unknown. PURPOSE: The purpose of this retrospective study was to evaluate general patient satisfaction with complete dentures fabricated through the custom disk method. In addition, a comparative cost-effectiveness analysis was conducted for the custom disk method and conventional removable complete dentures. MATERIAL AND METHODS: Complete dentures were fabricated for 44 edentulous participants by using the custom disk method (n=20) or the conventional removable complete denture (n=24). General patient satisfaction was measured by using visual analog scales before and after denture fabrication and compared by using the Wilcoxon signed-rank test (α=.05); the fabrication cost for each method was investigated and compared by using the Mann-Whitney U test (α=.05). Cost-effectiveness was analyzed with the incremental cost-effectiveness ratio as incremental cost per change in general patient satisfaction for the custom disk method with respect to the conventional removable complete denture. RESULTS: The median general patient satisfaction with the custom disk method and conventional removable complete denture after the intervention was 84.0 mm and 91.0 mm, respectively. General patient satisfaction with the custom disk method was significantly higher after the intervention (P=.002). The median labor costs for the custom disk method and conventional removable complete denture were 24 516 and 36 583 Japanese yen, respectively, and the difference was statistically significant (P<.001). The median of the total cost of the custom disk method and the conventional removable complete denture was 41 104 and 45 276 Japanese yen, respectively, and the difference was statistically significant (P=.004). The incremental cost-effectiveness ratio was -251.4. CONCLUSIONS: The custom disk method improved general patient satisfaction. The labor and total costs of the custom disk method were significantly lower than those of the conventional removable complete denture. The incremental cost-effectiveness ratio demonstrated that the custom disk method was more cost-effective than the conventional removable complete denture.
RESUMO
OBJECTIVE: To clarify the effect of oral health guidance on tongue-lip motor function in the outpatients visiting the Showa University Dental Hospital (Tokyo, Japan). BACKGROUND: The management of the oral function of older people visiting a dental hospital is important. Previous studies have revealed that tongue-lip motor function is easy to improve. However, the impact of oral health guidance on tongue-lip motor function in the outpatients of dental hospital requires further elucidation. MATERIALS AND METHODS: The participants (n = 35) included patients who were diagnosed with low tongue-lip motor function on evaluation by oral diadochokinesis (ODK) at the outpatient clinic. They underwent a second examination approximately 6-12 months later. Their demographic characteristics were recorded. Oral health guidance was provided through an educational leaflet on oral hypofunction when the participants visited the clinic. It included content on tongue twisters, voice training and a range of movement and muscle training of the tongue and lip. RESULTS: Following oral health guidance on tongue-lip motor function, the ODK values changed from 5.6 at the first examination to 6.0 at the second for /pa/, from 5.6 to 5.8 for /ta/ and from 5.2 to 5.4 for /ka/. This improvement was not significantly associated with age, sex, measurement period or number of visits. CONCLUSION: The findings of this longitudinal study suggested that oral health guidance using an oral hypofunction educational leaflet may be effective in improving the tongue-lip motor function of outpatients who had low tongue-lip motor function, regardless of the measurement period or the number of visits to the dental hospital.
Assuntos
Lábio , Saúde Bucal , Idoso , Hospitais , Humanos , Estudos Longitudinais , Pacientes Ambulatoriais , Língua/fisiologiaRESUMO
OBJECTIVE: To measure the occlusal force in the same group of patients with the Dental Prescale 50H type R and the Dental Prescale II, examine the association between them, and determine the reference value for Dental Prescale II that corresponds to the 50H type R 200 N reference value used to make a diagnosis of oral hypofunction. BACKGROUND: Reduced occlusal force, a measure of frailty in older persons, was previously determined with Prescale 50H type R pressure-sensitive film, but it has been replaced by the Prescale II. MATERIALS AND METHODS: The study participants were 441 men and women aged ≥ 65 (mean, 71.8 ± 5.3) years. The occlusal force was measured with the two different types of pressure-sensitive film, and their association was examined. Receiver operating characteristic curves for the Prescale II measured values were created with the 200 N reference value used for the 50H type R film as the cut-off value. RESULTS: The analysis set included 391 participants for whom measurements were obtained using both the 50H type R and the Prescale II. Linear regression analysis produced regression equations, and a ROC curve analysis provided reference values of 500 N for the Prescale II (without pressure filter) and 350 N for the Prescale II (with pressure filter). CONCLUSION: In occlusal force tests for making a diagnosis of oral hypofunction, reference values for the Prescale II (without pressure filter) and for the Prescale II (with pressure filter) were determined. The findings suggested that the Prescale II can be used as a diagnostic examination for oral hypofunction.