Assessment of the Smear Layer Removal Efficacy of Three Different Agents on Periodontally Compromised Tooth: An In Vitro Study.

AIM: The purpose of the present study was to evaluate the smear layer removal efficacy of three various agents on periodontally compromised tooth. MATERIALS AND METHODS: The current study included 75 molar teeth that were extracted due to periodontal disease. After that, 25 samples were randomly assigned using a simple random technique to the three different agent groups, group A: Scaling and root planing (SRP) and application of SofScale agent, group B: SRP and application of QMix agent, group C: SRP and application of MTAD agent. Using a diamond circular saw, the treated portions were divided into horizontal and vertical halves. All samples were viewed under Scanning Electron Microscope. Every tooth was focused at the coronal third, middle third, and apical third portion with a magnification of 1000×. Data were recorded and statistically analyzed. RESULTS: The smear layer removal efficacy was more in the QMix agent (3.06 ± 0.04) group followed by MTAD agent (3.28 ± 0.09) and SofScale agent (4.14 ± 0.10) group on the root surface. On intra group comparison, there was a statistically significant difference found in all the intra group agents with all the three levels. On inter group evaluation, at coronal third, there was no significant difference found between the different agents. There was a significant difference found between the different agents at middle and coronal third. CONCLUSION: On conclusion, the current investigation found that, the root surfaces treated with QMix shown a greater ability to remove smear layers compared to tooth surfaces treated with MTAD and SofScale agent. CLINICAL SIGNIFICANCE: Conventional therapies such as SRP effectively eliminate calculus, plaque, and necrosed cementum; nevertheless, they leave behind a smear layer that could impede normal healing. In an effort to overcome this, root conditioning agents were applied on the root surface to remove the smear layer. The traditional root conditioning agents such as citric acid have certain disadvantages, though, such as an acidic pH that could harm the root surface. As a result, researchers have been looking for biocompatible root conditioning treatments that are more effective. How to cite this article: Singh DK, BS Raj H, Soans CR, et al. Assessment of the Smear Layer Removal Efficacy of Three Different Agents on Periodontally Compromised Tooth: An In Vitro Study. J Contemp Dent Pract 2024;25(2):156-159.

Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study.

AIM: The aim of the present study was to assess the stain removal ability and color stability of three distinct dentifrices on artificially stained enamel surface. MATERIALS AND METHODS: This study included 75 intact, healthy premolars free of dental caries that were extracted during orthodontic therapy. The samples were allowed to dry for 6 hours after being submerged in the prepared tea solution for roughly 18 hours every day. Then this procedure was repeated for seven successive days. All samples were randomly divided into three experimental groups with 25 samples in each group. Group I: control dentifrice, group II: dentifrice containing hydrogen peroxide, group III: dentifrice containing papain and bromelain. A specially designed toothbrushing simulator was used to brush every sample in the relevant group. Using a spectrophotometer and a measurement program, color measurement was evaluated after staining process after 4 weeks and 8 weeks of teeth cleaning. Using a profilometer, the surface roughness values (Ra) were assessed. RESULTS: After 8 weeks of brushing of stained samples, the color stability was better in dentifrice containing hydrogen peroxide (1.14 ± 0.11) followed by dentifrice containing papain and bromelain (1.22 ± 0.08) and control group (1.30 ± 0.09). And after 8 weeks of brushing of stained samples, the surface roughness was more in dentifrice containing hydrogen peroxide (0.237 ± 0.02) followed by dentifrice containing papain and bromelain (0.229 ± 0.13) and control group (0.207 ± 0.05). CONCLUSION: The present study concluded that the dentifrice containing hydrogen peroxide showed a superior whitening effect on the stained enamel surface than dentifrice containing papain and bromelain and control dentifrice. CLINICAL SIGNIFICANCE: The development of various dentifrice products has been greatly aided by the increased demand for an improved esthetic appearance. Teeth's natural color and any external stains that could accumulate on the tooth surface combine to determine a tooth's color. Additionally, the use of whitening dental pastes to remove external stains has grown in favor. With the development of these whitening toothpastes, dentifrices' ability to lessen or eliminate extrinsic dental stains has increased. How to cite this article: Mishra D, Kamath DG, Alagla M, et al. Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study. J Contemp Dent Pract 2024;25(1):68-71.

A SEM Evaluation of the Permeability of Different Desensitizing Methods on Occlusion of Dentinal Tubules: An In-vitro Study.

AIM: The purpose of the current research was to assess the permeability of three various desensitizing techniques on dentinal tubule occlusion using a scanning electron microscope (SEM). MATERIALS AND METHODS: For this research, 100 human sound premolar teeth that were extracted for orthodontic purposes were gathered. With the aid of a water-cooled diamond saw, the teeth were divided in a mesiodistal (vertically) orientation. A sectioned sample (5 mm long by 5 mm wide by 3.5 mm deep), including the cervical region, was taken from each buccal side. To fully open the dentinal tubules, these samples were then kept in 17% ethylenediaminetetraacetic acid (EDTA) for 40 minutes. The samples were divided into four groups (n = 25), each receiving the following dentin surface treatments: Group I: Control, Group II: Samples received NaF 5% varnish treatment, Group III: Samples received diode laser treatment, and Group IV: Samples received CPP-ACP treatment. An SEM was used to inspect each specimen at a magnification of about × 3000 and photomicrographs was assessed. RESULTS: The maximum occlusion of dentinal tubules was found in samples were treated with Diode laser (2.96 ± 0.14) followed by samples treated with NaF 5% varnish (3.38 ± 0.10), samples were treated with CPP-ACP (3.42 ± 0.06) and control group (4.26 ± 0.19). There was a statistically significant difference found between the groups. CONCLUSION: In conclusion, all three desensitizing methods used in the present study were successful in the occlusion of dentin tubules. But the application of the Diode laser was effective in the reduction of dentin permeability compared to NaF 5% varnish and CPP-ACP. CLINICAL SIGNIFICANCE: Dentin hypersensitivity (DH) is characterized by a brief period of intense discomfort. One approach to managing DH is to obstruct dentin tubules in order to decrease dentin permeability. There are many substances that can reduce hypersensitivity, but the finest commercially available substance for treating the condition by occluding the tubes should be acknowledged.

Estimation of Gingival Crevicular Blood as Noninvasive Method to Determine the Blood Glucose Level: A Comparative Study.

AIM: The current study's aim was to assess gingival crevicular blood as a noninvasive method to measure blood glucose levels. MATERIALS AND METHODS: The current study comprised a total of 50 patients who had been diagnosed with chronic periodontitis and age was ≥30 years old. The study's procedures were carried out after receiving informed consent. For finger capillary blood collection method, a sterile lancet was used to prick the finger and a drop of blood was taken, for gingival crevicular blood collection method, blood was taken from the gingival margin of the chosen site, and for venous blood collection method with the aid of a disposable syringe, a venous blood sample was taken from the patient's antecubital fossa for determining blood glucose levels. One-way analysis of variance (ANOVA) was used to examine the differences between the three methodologies' significance, and Karl Pearson's correlation (r) was used to determine their correlation. RESULTS: The maximum glucose level was found in venous blood (187.78 ± 18.23), followed by finger capillary blood (181.88 ± 21.67) and gingival crevicular blood (169.04 ± 11.24). And there was no significant difference between the different blood collection methods (p > 0.05). The positive significant correlation was found between gingival crevicular blood and finger capillary blood (r = 0.912, p < 0.001). Correlation with gingival crevicular blood and venous blood showed a positive correlation (r = 0.898, p < 0.001). Correlation between venous blood and finger capillary blood also showed a strong positive correlation (r = 0.988, p < 0.001). CONCLUSION: In conclusion, the findings of the current study suggest that blood drawn from the gingival crevicular during a clinical examination may be a great source for glucometric analysis. The gingival crevicular blood may show to be a promising technique for routine dental office screening for diabetes mellitus in periodontal patients, even if capillary/venous blood samples used for diabetes mellitus screening are the gold standard. CLINICAL SIGNIFICANCE: Oral health is crucial for the early detection of many systemic disorders. As a result, dentists are crucial in the screening for systemic disorders. One of the prevalent chronic disorders is diabetes. Any systemic disease that is detected early enough can avoid long-term problems.

In Vitro Assessment of Different Toothbrush Designs on Enamel Surface Abrasion: A Profilometric Study.

AIM: The purpose of this study was to evaluate the impact of three different toothbrush designs on enamel surface abrasion. MATERIALS AND METHODS: Sixty intact freshly extracted maxillary central incisors were considered for the study. All of the extracted teeth's surfaces were severely trimmed, leaving only the labial surface intact. In the trial, a conventional teeth-whitening dentifrice slurry was utilized. A brushing model was created to deliver uniform force in unidirectional motion. Dontrix Gauge was used to control the tension of the spring. The force was kept constant at 180 ± 20 g. The mounted enamel samples were separated into three groups (20 samples each) at random: group A: toothbrushes have a flat trim bristle design, group B: toothbrushes have a zigzag pattern, and group C: toothbrushes have a bi-level bristle design. For 2 weeks, each sample was brushed twice daily for 2 minutes. A profilometer was used to measure the average surface roughness. RESULTS: After toothbrushing, the maximum mean surface roughness score was found in zigzag pattern group (2.10 ± 0.23), followed by bi-level bristle design group (2.06 ± 0.12) and the least was in the flat trim bristle design group (1.96 ± 0.09). There was a significant difference between the different toothbrush bristle pattern groups (p < 0.001). CONCLUSION: On conclusion, the results of this study showed that, in comparison to toothbrushes with zigzag patterns and bi-level bristle designs, flat trim toothbrush bristle designs cause the least amount of surface abrasion and are relatively safe to use. CLINICAL SIGNIFICANCE: Toothbrushing with toothpaste contributes significantly to dental abrasion. A variety of parameters, including toothpaste abrasivity and concentration, brushing frequency, brushing length, brushing force, and toothbrush bristle stiffness, have the potential to influence the abrasion process of dental hard tissue.

Influence of Different Mouthwashes on the Efficacy of Fluoridated Dentifrices in Prevention of Enamel Erosion: An In Vitro Study.

AIM: The purpose of the current study was to evaluate the impact of three various mouthwashes on the effectiveness of fluoride dentifrices in preventing enamel erosion. MATERIALS AND METHODS: A total of 120 sound intact human premolar teeth which were extracted for orthodontic treatment were selected for the study. A 3 × 3 mm window section was positioned in the middle of the coronal surface of the tooth in order to define the study area. Each sample was placed in a solution of 1% citric acid (pH 3.5) for 10 minutes in order to produce an eroded surface. All samples were divided into two main groups (60 samples each) as follows: Group A for sodium fluoride dentifrices and group B for stannous fluoride dentifrices, again it is subdivided into: CHX: Chlohex ADS®, EO: Listerine®, CPC: Colgate® Plax (20 samples in each subgroup). After that, samples underwent the pH cycling model for 5 days. Samples were examined for surface loss using a scanning electron microscope. RESULTS: In sodium fluoride dentifrices group, before intervention, the surface loss was 3.12 ± 1.03 in CHX group, 3.08 ± 1.20 in EO group, and 3.09 ± 0.96 in CPC group. After intervention, the less surface loss found with CHX group (2.18 ± 0.84), followed by CPC (2.34 ± 0.74) and EO group (2.46 ± 0.97). In stannous fluoride dentifrices group, before intervention, the surface loss in CHX group was 3.26 ± 1.19, in EO group, it was 3.18 ± 1.31, and in CPC group, it was 3.22 ± 1.06. After intervention, the less surface loss found with CHX: group (1.90 ± 0.54), followed by CPC (2.24 ± 0.28) and EO group (2.38 ± 0.20). CONCLUSION: The present study concluded that the fluoride dentifrices' preventive effects against tooth surface loss were unaffected by a different mouthwashes with varying compositions and major constituents. In terms of erosion, fluoridated toothpaste containing stannous fluoride was found to provide better surface loss protection than sodium fluoride. CLINICAL SIGNIFICANCE: Primary prevention and the eradication of contributing causes are the greatest strategies for preventing erosion. Simultaneously, antibacterial agent in the mouthwashes may help in enhancing the effect of fluoride in the enamel, owing to their high affinity for teeth structures. Therefore, in addition to cause-related treatment, further efforts to reduce tooth tissue loss are also necessary.

Impact of Fluoridated Mouthwashes on Strength and Durability of Three Different Synthetic Absorbable Suturing Materials: An In Vitro Study.

AIM: The aim of the current in vitro research was to assess the effect of fluoride-containing mouthwashes on the strength and durability of three different synthetic absorbable suturing materials. MATERIALS AND METHODS: Three types of synthetic absorbable suture materials were employed in this research, and every group comprised 20 suture samples. These include group I: Polyglactin 910, group II: Polyglycolic acid, and group III: Poliglecaprone 25. This research utilized 4-0 gauge sutures. Each example was tied using a square surgeon's knot about elastic rubber tubing. The biology of the oral milieu was replicated in vitro through the use of artificial saliva. The medium that was subjected to test prior to inclusion were 0.2% chlorhexidine gluconate as well as 0.044% sodium fluoride. The tensile strength of the specimen suture materials was subjected to test at a particular time intervals: prior to immersion, the 1st day, the 7th day, as well as the 14th day after immersion. Tensile strength was evaluated using a Universal Ultra Test machine. RESULTS: Post-immersion in 0.2% chlorhexidine gluconate mouthrinse, the mean tensile strength of polyglactin (PLG) 910 sutures was 24.48 ± 0.08 at pre-immersion and 4.36 ± 0.01 on the 14th day. The mean tensile strength of polyglycolic acid (PGA) sutures was 24.04 ± 0.26 at pre-immersion and 2.10 ± 0.02 on the 14th day. The mean tensile strength of Poliglecaprone 25 sutures was 23.82 ± 0.11 at pre-immersion and 1.34 ± 0.08 on the 14th day. Post-immersion in 0.044% sodium fluoride mouthrinse, the mean tensile strength of PLG 910 sutures was 24.18 ± 0.02 at pre-immersion and 5.12 ± 0.21 on the 14th day. The mean tensile strength of PGA sutures was 24.88 ± 0.34 at pre-immersion and 4.58 ± 0.10 on the 14th day. The mean tensile strength of Poliglecaprone 25 sutures was 24.48 ± 0.27 at pre-immersion and 5.08 ± 0.14 on the 14th day. A statistically noteworthy difference was noted amid the three types of sutures at dissimilar time points evaluated with p <0.001. CONCLUSION: The current research arrived at a conclusion that there is a significant difference between the mean tensile strength and purpose of the medium used for immersion as well as the tenure. Polyglactin suture material exhibited superior strength as compared to PGA and poliglecaprone suture substances following immersion in the investigational media. CLINICAL SIGNIFICANCE: Suture materials are employed in the closure of incised flaps, to aid healing by primary intention, along with control of bleeding. In oral as well as periodontal surgery, the right choice of sutures is very important for good healing. Suture choice for the mouth should be influenced by the requirements of the anticipated repair and the surgeon's fondness.

Glucocorticoids in spondyloarthritis-systematic review and real-world analysis.

OBJECTIVE: The objective of this study was to identify and summarize the efficacy and safety of systemic glucocorticoids (GCs) and local injections of GC in SpA. METHODS: PubMed (Medline) and EMBASE were searched with pre-defined keywords for relevant articles in English reporting randomized controlled trials (RCTs), non-randomized interventional studies and non-randomized observational studies of the efficacy of GC in SpA, with five or more patients, for inclusion in a systematic literature review. Local injections of GC included IA and entheseal injections, but excluded SI joint injections. RESULTS: Out of 9657 records identified, there were 14 studies on the use of systemic GCs in SpA (364 patients), including two RCTs of oral prednisolone. On pooling data from two placebo-controlled RCTs (≤24 weeks), BASDAI 50 was 4.2 times more likely (95% CI: 1.5, 11.5) and Ankylosing Spondylitis Assessment Group (ASAS) 20 was twice more likely (95% CI: 1.1, 3.64) to occur in patients on high-dose oral prednisolone (± taper). Pulsed GCs led to dramatic improvements that lasted a few weeks to a few months. There were no deaths or major adverse events. There were 10 studies (560 patients) on local GCs in SpA. IA injection was effective in achieving a sustained response in 51.5-90% of joints at 6 months. Entheseal injections led to reduced pain and improved US parameters. CONCLUSION: There were limited studies on either systemic or local injections of GCs in SpA. However, there was good evidence of efficacy with the use of high-dose systemic GCs in the short term (≤6 months) in SpA. Both IA and entheseal injections seemed safe and effective.

Evidences of Biomimetic and Nonantibiotic Characteristics of the Zinc-Carboxymethyl Chitosan-Genipin Organometallic Complex and Its Biocompatibility Aspects.

Bioinspired nonantibiotics can prove to be a better and an efficient tool to fight against antimicrobial resistance. In our study, biomaterial composed of zinc-carboxymethyl chitosan (CMC)-genipin was investigated for this purpose. Briefly, CMC was synthesized and transformed to porous scaffolds using the freeze drying method. The scaffolds were cross-linked and stabilized with genipin and zinc (2 M zinc acetate), respectively. FTIR spectroscopic data testified Zn complex formation and pointed out the absence of water molecule like that of zinc motif containing proteins. Hence, the complex may be termed as biomimetic. Genipin (0.5%) cross-linking appeared to contribute additively to the wet compressive strength of the zinc-CMC scaffolds. Biodegradation data revealed better stability of CMC-genipin-zinc scaffolds in enzymatic and nonenzymatic conditions than their redundant controls. The scaffolds seem to support adhesion and proliferation of human dental pulp stem cells and were hemocompatible to human red blood corpuscles, as revealed by scanning electron microscopy. The scaffolds were found to be antibacterial and mildly antibiofilm when tested against biofilm-forming bacteria, that is, Staphylococcus aureus (ATCC 9144), making it a potential nonantibiotic-like biomaterial. To conclude, this organometallic complex-based biomaterial may potentially serve as a weapon against antimicrobial resistance. Furthermore, the biomaterial potentially finds its application in dental, maxillofacial, and orthopedic tissue engineering applications.

Synthesis and cytotoxicity study of novel 3-(triazolyl)coumarins based fluorescent scaffolds.

Recently a choice of fluorescent bioimaging probes have been developed as medical diagnostic tools. Herein, we have introduced a series of coumarin-based target specific probes for cancer theranostic application which play a dual role in the field of both diagnosis and therapy. A fluorogenic version of 1,3-dipolar cycloaddition between azides and alkynes (DBCO) has been introduced to develop the triazolylcoumarin based fluorescent scaffolds. These scaffolds were screened for their anticancer activity against breast cancer (MCF7) and human epitheloid cervix carcinoma (HeLa) cell line. It was established that triazolylcoumarins (5c and 5d) are having electronegative substitution in the benzene ring displayed most effective anticancer profile in both the cell lines. Compounds 5a and 5d exhibited maximum quantum yield and strong cellular uptake in the MCF-7 cell line.

Altered Sensorium in a Young Male: Marchiafava Bignami Disease Revisited.

Marchiafava Bignami disease (MBD) is a rare and devastating complication of chronic alcoholism. Degeneration of the corpus callosum is the hallmark feature of MBD. Early diagnosis of MBD by its typical "Sandwich Sign" on magnetic resonance imaging (MRI). Prompt institution of treatment and strict alcohol abstinence can cause regression of changes and hence, clinical improvement. Here we report the case of a young chronic alcoholic male admitted with altered sensorium and his further course in ward.

Anionic species from multivalent metal salts are differentially retained during aqueous ionic gelation of sodium alginate and could fine-tune the hydrogel properties.

The role of anionic counterions of divalent metal salts in alginate gelation and hydrogel properties has been thoroughly investigated. Three anions were selected from the Hofmeister series, namely sulphate, acetate and chloride, paired in all permutations and combinations with divalent metal cations like calcium, zinc and copper. Spectroscopic analysis revealed the presence of anions and their interaction with the respective metal cations in the hydrogel. The data showed that the gelation time and other hydrogel properties were largely controlled by cations. However, subtle yet significant variations in viscoelasticity, water uptake, drug release and cytocompatibility properties were anion dependent in each cationic group. Computational modelling based study showed that metal-anion-alginate configurations were energetically more stable than the metal-alginate models. The in vitro and in silico studies concluded that acetate anions preceded chlorides in the drug release, swelling and cytocompatibility fronts, followed by sulphate anions in each cationic group. Overall, the data confirmed that anions are an integral part of the metal-alginate complex. Furthermore, anions offer a novel option to further fine-tune the properties of alginate hydrogels for myriads of applications. In addition, full exploration of this novel avenue would enhance the usability of alginate polymers in the pharmaceutical, environmental, biomedical and food industries.

Exploring Knowledge, Awareness, and Practices Regarding Periodontal Health Assessment and Mechanical Plaque Control Among the Shillong Population of Meghalaya, India: A Descriptive Cross-Sectional Investigation.

Background Periodontal diseases are widespread oral health conditions. However, there remains a lack of comprehensive understanding regarding the knowledge, awareness, and practices related to periodontal health assessment and mechanical plaque control among specific populations, such as those residing in Shillong, Meghalaya. Shillong, being the capital city of Meghalaya in northeastern India, represents a diverse demographic and cultural landscape. Aim This study aims to evaluate the knowledge, awareness, and practices related to mechanical plaque control among the population of Shillong City. Methodology A descriptive cross-sectional online survey was conducted among the residents of Shillong City, Meghalaya. Data collection involved the administration of an 18-item, closed-ended, self-structured questionnaire. Before the main data collection, a pilot study was conducted involving 63 individuals. Data analysis was performed using IBM SPSS Statistics for Windows, Version 26.0 (Released 2019; IBM Corp., Armonk, NY, USA), employing the chi-square test and ANOVA with a significance level of 0.05. Results Study participants were categorized into five age groups spanning from 21 to 64 years old, with the age group of 41 to 50 years demonstrating the highest mean knowledge score. Age exhibited a statistically significant influence on knowledge scores. Conclusion The study reveals a commendable level of knowledge, awareness, and adherence to practices regarding the primary tool for oral hygiene maintenance, the toothbrush, among the residents of Shillong City.

Bioselective and Radiopaque Zinc-Biopolymeric Complex-Based Porous Biomaterials Promote Mammalian Tissue Ingrowth In Vivo While Inhibiting Microbial Biofilm Gene Expression and Biofilm Formation.

Metal-organic complexes have shown astounding bioactive properties; however, they are rarely explored as biomaterials. Recent studies showed that carboxymethyl-chitosan (CMC) genipin-conjugated zinc biomimetic scaffolds have unique bioselective properties. The biomaterial was reported to be mammalian cell-friendly; at the same time, it was found to discourage microbial biofilm formation on its surface, which seemed to be a promising solution to addressing the problem of trauma-associated biofilm formation and development of antimicrobial resistance. However, the mechanically frail characteristics and zinc overload raise concerns and limit the potential of the said biomaterials. Hence, the present work is focused on improving the strength of the earlier scaffold formulations, testing its in vivo efficacy and reaffirming its action against biofilm-forming microbe Staphylococcus aureus. Scaling up of CMC proportion increased rigidity, and 8% CMC was found to be the ideal concentration for robust scaffold fabrication. Freeze-dried CMC scaffolds with or without genipin (GP) cross-linking were conjugated with zinc using 2 M zinc acetate solution. Characterization results indicated that the CMC-Zn scaffolds, without genipin, showed mechanical properties close to bone fillers, resist in vitro enzymatic degradation until 4 weeks, are porous in nature, and have radiopacity close to mandibular bones. Upon implantation in a subcutaneous pocket of Wistar rats, the scaffolds showed tissue in-growth with simultaneous degradation without any signs of toxicity past 28 days. Neither were there any signs of toxicity in any of the vital organs. Considering many superior properties among the other formulations, the CMC-Zn scaffolds were furthered for biofilm studies. CMC-Zn showed negligible S. aureus biofilm formation on its surface as revealed by an alamar blue-based study. RT-PCR analysis revealed that CMC-Zn downregulated the expression of pro-biofilm effector genes such as icaC and clfB. A protein docking study predicted the inhibitory mechanism of CMC-Zn. Although it binds strongly when alone, at high density, it may cause inactivation of the transmembrane upstream activators of the said genes, thereby preventing their dimerization and subsequent inactivation of the effector genes. In conclusion, zinc-conjugated carboxymethyl-chitosan scaffolds are mechanically robust, porous, yet biodegradable, harmless to the host in the long term, they are radiopaque and prevent biofilm gene expression in notorious microbes; hence, they could be a suitable candidate for bone filler applications.

The exclusion of anti-D alloantibody in a suspected anti-G antibody in a pregnant 28-year-old Odiya Indian woman.

The Rh-D negative pregnancy is commonly associated with alloimmunization against D-antigen. It can be prevented by anti-D prophylaxis in pregnant patients with negative results on antibody screening. Hence, it is essential to exclude alloantibody-D in the presence of multiple alloantibodies. Anti-G antibody is formed after exposure to G antigen in neonate RBCs. Blood-group discrepancy was noted in reverse grouping, and antibody-screening results were positive in our case individual, a 28-year old Odiya Indian woman. We performed antibody identification on serum specimens from this patient, which revealed the pattern of anti-D + anti-C antibody specificity. Blood-group discrepancy was solved using rr (ce/ce)-phenotype pooled cells for reverse grouping. We identified anti-G antibodies by themselves without anti-D and anti-C after performing sequential adsorption of serum with r'r' (Ce/Ce) and R2R2 (DcE/DcE) group-O RBCs in the mother, who had rr phenotype and primigravida designation. After completing antibody screening at the first antenatal check-up, we recommended prophylactic anti-D for the mother in any future pregnancies she may have.

Antimicrobial Efficacy of Three Different Mouthwashes on Periodontal Pathogens-An In vitro Study.

Aim: The aim of this research was to identify the antimicrobial effectiveness of three different mouthwashes on periodontal pathogenic microorganisms. Materials and Methods: 2 periodontal disease-causing microorganisms, i.e., Aggregatibacter actinomycetemcomitans, and Porphyromonas gingivalis, were chosen for this investigation. Prior to commencing this research, a variety of branded and commercially obtainable mouthwashes were procured. Three oral rinses, namely HiOra, Hexidine, and Amflor, were chosen for the current research. The subculture of A. actinomycetemcomitans as well as P. gingivalis was performed by subjecting them to incubation for 48 to 72 hours at 35-37°C. The disk diffusion method was employed to evaluate the antibacterial efficiency of the extract in opposition to the pathogens tested. The zone of inhibition was calculated in millimeters. The mean value of every sample was documented. Results: Hexidine oral rinse in pursuit by Amflor as well as HiOra oral rinse exhibited the highest zone of inhibition in opposition to A. Actinomycetemcomitans and P. gingivalis. The differences amid the groups were statistically significant with a P value < 0.001. Conclusion: The current research concluded that amid the three different oral rinses employed in the current research, Hexidine oral rinse exhibited greatest antimicrobial effectiveness versus Amflor and HiOra mouthrinse.

Hemolytic Disease of Newborn due to ABO Incompatibility between B Blood Group Mother and A Blood Group Neonate.

ABO incompatibility between O blood group mother and non-O blood group neonate is common. It rarely causes anemia and hyperbilirubinemia in neonate, requiring invasive management. Direct antiglobulin test may be positive in these cases with immunoglobulin (Ig)-G antibody specificity. There are few cases of hemolytic disease of newborn due to ABO incompatibility between mother and newborn with non - O blood group mother. After obtaining consent from the patient, we reported a case of incompatibility in a B blood group mother and A blood group neonate, and it was managed with phototherapy.

Impact of dose and storage duration of platelet concentrates on platelet recovery between ABO identical and ABO non-identical random donor platelet transfusions in hemato-oncology patients.

INTRODUCTION AND OBJECTIVES: It is challenging to adopt a policy of ABO identical platelet transfusion in hemato-oncological patients because of the high demand. Moreover, there are no global standards for the management of ABO non-identical platelet transfusions due to limited evidence. The current study compared the impact of dose and storage duration of platelets on percent platelet recovery (PPR) at 1 h and 24 h between ABO identical and ABO non-identical platelet transfusions in hemato-oncological conditions. The other objectives were to assess the clinical efficacy and compare adverse reactions between the two groups. METHODS: A total of 130 random donor platelet transfusion episodes (81 ABO identical and 49 ABO non-identical) were evaluated in 60 eligible patients with different malignant, as well as non-malignant, hematological conditions. All analysis was performed using two-sided tests, and p-values <0.05 were considered significant. RESULTS: The PPR at 1 h and 24 h was significantly higher in ABO identical platelet transfusion. Platelet recovery and survival were not affected by the gender, dose or storage duration of platelet concentrate. Aplastic anemia and myelodysplastic syndrome (MDS) disease conditions were observed to be independent risk predictors for 1-h post-transfusion refractoriness. CONCLUSION: ABO identical platelets have higher platelet recovery and survival. Both ABO identical and ABO non-identical platelet transfusions have similar efficacy in controlling bleeding episodes up to World Health Organization (WHO) grade two. Assessment of other factors, such as platelet functional properties in the donor, anti-HLA and anti-HPA antibodies, may be needed to better understand the platelet efficacy of platelet transfusions.

Hemolytic disease of the fetus and newborn due to minor blood group alloimmunization in a mother of sickle cell disease with multiple alloantibodies.

Hemolytic disease of the fetus and newborn is due to maternal IgG antibodies that transport through the placenta and destroy neonatal red cells. A mismatch of antigens between mother and fetus causes isoimmunization resulting in mild anemia, which may progress to fetal hydrops in the intrauterine period and severe hyperbilirubinemia to kernicterus in neonates. The isoimmunization is mainly caused by Rh-D and ABO antibodies. In this case report, we found neonatal hyperbilirubinemia due to the presence of anti-c alloantibody previously developed in a sickle cell disease (SCD) pregnant female. It is an unusual case of fetal hyperbilirubinemia due to minor blood group alloimmunization in a SCD needing exchange transfusion. Multi-transfused patients should be counseled regarding the need to perform antibody screening frequently before pregnancy for better treatment of both mother and child.

Assessment of the Impact of Commonly used Beverages on Durability of Suture Materials: An In Vitro Study.

Aim: The current study was conducted to evaluate the influence of frequently ingested beverages on the stability of suture materials. Materials and Methods: This research comprised of two kinds of chromic catgut, polyglactin 910 (4-0) absorbable suture materials. Every specimen was subjected to tying using a square surgeon's knot. Subsequent to pretensioning, 80 suture samples (40 of every material) were employed in this research. Every specimen was subjected to immersion in artificial saliva to replicate the oral atmosphere. Specimens were sunken in the acidic drink (Coca Cola) and tea for 10 min every day. Tensile strengths of the suture specimens were subjected to test at particular time periods: before immersion and 1, 7, and 14 days after immersion. Tensile strength evaluation of the suture specimens was performed employing the microtensile tester at a cross-head speed of 2.0 mm/60 s. Results: When subjected to exposure to acidic beverages, the tensile strength of chromic catgut suture before immersing was 25.14 ± 0.16, 25.02 ± 0.08 on the first day, 16.34 ± 0.23 on the seventh day, and 9.18 ± 0.28 on the fourteenth day. When the suture substance made contact with tea, the tensile strength before immersing was 24.48 ± 0.02, 24.14 ± 0.16 on the first day, 18.26 ± 0.11 on the seventh day, and 12.39 ± 0.14 on the fourteenth day. When subjected to exposure to acidic beverages, the tensile strength of polyglactin 910 sutures before immersing was 25.21 ± 0.02, 25.08 ± 0.01 on the first day, 18.12 ± 0.06 on the seventh day, and 10.06 ± 0.32 on the fourteenth day. When the suture substance made contact with tea, the tensile strength before immersing was 25.02 ± 0.14, 24.96 ± 0.04 on the first day, 20.48 ± 0.18 on the seventh day, and 14.10 ± 0.08 on the fourteenth day. The differences between the groups were statistically significant. Conclusion: In conclusion, polyglactin 910 exhibited a maintained strength superior than chromic catgut sutures subsequent to 14 days.