Green approach to the synthesis of α-aminophosphonate-tetrahydroisoquinoline hybrids and their anti-cholinesterase activity.

A series of 19 novel α-aminophosphonate-tetrahydroisoquinoline hybrids were synthesized through a cross dehydrogenative coupling reaction between N-aryl-tetrahydroisoquinolines and dialkylphosphites, using tert-butyl hydroperoxide as oxidazing agent. This simple procedure provided products with high atom economy and moderate to high yields. In vitro cholinesterase inhibitory activity of these compounds was evaluated. All the synthesized compounds showed good to excellent selective inhibition against butyrylcholinesterase. Compound 3bc was found to be the most active derivative with an IC50 of 9 nM. Molecular modelling studies suggested that the inhibitor is located in the peripheral anionic site (PAS) of the enzyme and interacts with some residue of the catalytic anionic site. Kinetic studies revealed that 3bc acts as a non-competitive inhibitor. Predicted ADME showed good pharmacokinetics and drug-likeness properties for most hybrids. Each newly synthesized compound was characterized by IR, 1H NMR, 13C NMR, 31P NMR spectral studies and also HRMS. The results of this study suggest that α-aminophosphonate-tetrahydroisoquinoline hybrids can be promising lead compounds in the discovery of new and improved drugs for the treatment of Alzheimer's disease and related neurodegenerative disorders.

Oxidative α-Functionalization of 1,2,3,4-Tetrahydroisoquinolines Catalyzed by a Magnetically Recoverable Copper Nanocatalyst. Application in the Aza-Henry Reaction and the Synthesis of 3,4-Dihydroisoquinolones.

The oxidative α-functionalization of 2-aryl-1,2,3,4-tetrahydroisoquinolines (THIQs) promoted by a versatile heterogeneous nanocatalyst consisting of copper nanoparticles immobilized on silica-coated maghemite (CuNPs/MagSilica) has been accomplished. The methodology was successfully applied in the cross-dehydrogenative coupling (CDC) reaction of N-aryl THIQs and other tertiary amines with nitromethane as a pro-nucleophile (aza-Henry reaction) and the α-oxidation of THIQs with O2 as a green oxidant. Phosphite, alkyne, or indole derivatives were also shown to be suitable candidates for their use as pro-nucleophiles in the CDC reaction with THIQs. The catalyst, with very low copper loading (0.4-1.0 mol % Cu), could be easily recovered by means of an external magnet and reused in four cycles without significant loss of activity.

Innovative Three-Step Microwave-Promoted Synthesis of N-Propargyltetrahydroquinoline and 1,2,3-Triazole Derivatives as a Potential Factor Xa (FXa) Inhibitors: Drug Design, Synthesis, and Biological Evaluation.

The coagulation cascade is the process of the conversion of soluble fibrinogen to insoluble fibrin that terminates in production of a clot. Factor Xa (FXa) is a serine protease involved in the blood coagulation cascade. Moreover, FXa plays a vital role in the enzymatic sequence which ends with the thrombus production. Thrombosis is a common causal pathology for three widespread cardiovascular syndromes: acute coronary syndrome (ACS), venous thromboembolism (VTE), and strokes. In this research a series of N-propargyltetrahydroquinoline and 1,2,3-triazole derivatives as a potential factor Xa (FXa) inhibitor were designed, synthesized, and evaluated for their FXa inhibitor activity, cytotoxicity activity and coagulation parameters. Rational design for the desired novel molecules was performed through protein-ligand complexes selection and ligand clustering. The microwave-assisted synthetic strategy of selected compounds was carried out by using Ullmann-Goldberg, N-propargylation, Mannich addition, Friedel-Crafts, and 1,3-dipolar cycloaddition type reactions under microwave irradiation. The microwave methodology proved to be an efficient way to obtain all novel compounds in high yields (73-93%). Furthermore, a thermochemical analysis, optimization and reactivity indexes such as electronic chemical potential (µ), chemical hardness (η), and electrophilicity (ω) were performed to understand the relationship between the structure and the energetic behavior of all the series. Then, in vitro analysis showed that compounds 27, 29-31, and 34 exhibited inhibitory activity against FXa and the corresponding half maximal inhibitory concentration (IC50) values were calculated. Next, a cell viability assay in HEK293 and HepG2 cell lines, and coagulation parameters (anti FXa, Prothrombin time (PT), activated Partial Thromboplastin Time (aPTT)) of the most active novel molecules were performed to determine the corresponding cytotoxicity and possible action on clotting pathways. The obtained results suggest that compounds 27 and 29 inhibited FXa targeting through coagulation factors in the intrinsic and extrinsic pathways. However, compound 34 may target coagulation FXa mainly by the extrinsic and common pathway. Interestingly, the most active compounds in relation to the inhibition activity against FXa and coagulation parameters did not show toxicity at the performed coagulation assay concentrations. Finally, docking studies confirmed the preferential binding mode of N-propargyltetrahydroquinoline and 1,2,3-triazole derivatives inside the active site of FXa.

Alkynyl and ß-ketophosphonates: Selective and potent butyrylcholinesterase inhibitors.

A series of thirty-three alkynyl and ß-ketophosphonates were evaluated for their in vitro acetyl- and butyryl-cholinesterase (AChE and BChE) inhibitory activities using Ellman's spectrophotometric method. None of the examined compounds inhibited AChE activity at tested concentrations while twenty-nine of them showed significant and selective inhibition of BChE with IC50 values between 38.60 µM and 0.04 µM. In addition, structure-activity relationships were discussed. The most effective inhibitors were the dibutyl o-methoxyphenyl alkynylphosphonate 3dc and dibutyl o-methoxyphenyl ß-ketophosphonate 4dc. Activities of most potent compounds were also compared with a commercial organophosphorus compound. These results could inspire the design of new inhibitors with stronger activity against BChE.

Copper Nanoparticles in Click Chemistry.

The challenges of the 21st century demand scientific and technological achievements that must be developed under sustainable and environmentally benign practices. In this vein, click chemistry and green chemistry walk hand in hand on a pathway of rigorous principles that help to safeguard the health of our planet against negligent and uncontrolled production. Copper-catalyzed azide-alkyne cycloaddition (CuAAC), the paradigm of a click reaction, is one of the most reliable and widespread synthetic transformations in organic chemistry, with multidisciplinary applications. Nanocatalysis is a green chemistry tool that can increase the inherent effectiveness of CuAAC because of the enhanced catalytic activity of nanostructured metals and their plausible reutilization capability as heterogeneous catalysts. This Account describes our contribution to click chemistry using unsupported and supported copper nanoparticles (CuNPs) as catalysts prepared by chemical reduction. Cu(0)NPs (3.0 ± 1.5 nm) in tetrahydrofuran were found to catalyze the reaction of terminal alkynes and organic azides in the presence of triethylamine at rates comparable to those achieved under microwave heating (10-30 min in most cases). Unfortunately, the CuNPs underwent dissolution under the reaction conditions and consequently could not be recovered. Compelling experimental evidence on the in situ generation of highly reactive copper(I) chloride and the participation of copper(I) acetylides was provided. The supported CuNPs were found to be more robust and efficient catalyst than the unsupported counterpart in the following terms: (a) the multicomponent variant of CuAAC could be applied; (b) the metal loading could be substantially decreased; (c) reactions could be conducted in neat water; and (d) the catalyst could be recovered easily and reutilized. In particular, the catalyst composed of oxidized CuNPs (Cu2O/CuO, 6.0 ± 2.0 nm) supported on carbon (CuNPs/C) was shown to be highly versatile and very effective in the multicomponent and regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles in water from organic halides as azido precursors; magnetically recoverable CuNPs (3.0 ± 0.8 nm) supported on MagSilica could be alternatively used for the same purpose under similar conditions. Incorporation of an aromatic substituent at the 1-position of the triazole could be accomplished using the same CuNPs/C catalytic system starting from aryldiazonium salts or anilines as azido precursors. CuNPs/C in water also catalyzed the regioselective double-click synthesis of ß-hydroxy-1,2,3-triazoles from epoxides. Furthermore, alkenes could be also used as azido precursors through a one-pot CuNPs/C-catalyzed azidosulfenylation-CuAAC sequential protocol, providing ß-methylsulfanyl-1,2,3-triazoles in a stereo- and regioselective manner. In all types of reaction studied, CuNPs/C exhibited better behavior than some commercial copper catalysts with regard to the metal loading, reaction time, yield, and recyclability. Therefore, the results of this study also highlight the utility of nanosized copper in click chemistry compared with bulk copper sources.

Base-Free Direct Synthesis of Alkynylphosphonates from Alkynes and H-Phosphonates Catalyzed by Cu2O.

A simple and mild methodology for the direct synthesis of alkynylphosphonates is presented. The reaction of a variety of terminal alkynes with dialkyl phosphites in the presence Cu2O (14 mol %) led to the formation of the corresponding alkynylphosphonates in good to excellent yields. Reactions are performed under air, in acetonitrile as solvent, and in the absence of base or ligand additives. This new methodology is compatible with the presence of a wide variety of functional groups on the starting alkynes and can be scaled up to a gram scale.

Alkenes as azido precursors for the one-pot synthesis of 1,2,3-triazoles catalyzed by copper nanoparticles on activated carbon.

A one-pot protocol for the synthesis of 1,2,3-triazoles has been developed starting from inactivated alkenes and based on two click reactions: the azidosulfenylation of the carbon-carbon double bond and the copper-catalyzed azide-alkyne cycloaddition (CuAAC). High yields of the ß-methylsulfanyl triazoles have been attained using CuNPs/C as catalyst, with other commercial copper catalysts being completely inactive. The versatility of the methylsulfanyl group has been demonstrated through a series of synthetic transformations, including direct access to 1-vinyl and 4-monosubstituted triazoles.

Bio-click chemistry: a bridge between biocatalysis and click chemistry.

The fields of click chemistry and biocatalysis have rapidly grown over the last two decades. The development of robust and active biocatalysts and the widespread use of straightforward click reactions led to significant interactions between these two fields. Therefore the name bio-click chemistry seems to be an accurate definition of chemoenzymatic reactions cooperating with click transformations. Bio-click chemistry can be understood as the approach towards molecules of high-value using a green and sustainable approach by exploiting the potential of biocatalytic enzyme activity combined with the reliable nature of click reactions. This review summarizes the principal bio-click chemistry reactions reported over the last two decades, with a special emphasis on small molecules. Contributions to the field of bio-click chemistry are manifold, but the synthesis of chiral molecules with applications in medicinal chemistry and sustainable syntheses will be especially highlighted.

Multicomponent click synthesis of 1,2,3-triazoles from epoxides in water catalyzed by copper nanoparticles on activated carbon.

Copper nanoparticles on activated carbon have been found to effectively catalyze the multicomponent synthesis of ß-hydroxy-1,2,3-triazoles from a variety of epoxides and alkynes in water. The catalyst is easy to prepare, reusable at a low copper loading (0.5 mol %), and exhibits higher catalytic activity than some commercially available copper sources. The regio- and stereochemistry of the reaction has been revised and unequivocally established on the basis of X-ray crystallographic analyses. An NMR experiment has been implemented for the rapid and unmistakable determination of the regiochemistry of the process. Some mechanistic aspects of the reaction have been also undertaken which unveil the participation of copper(I) acetylides.

Click chemistry from organic halides, diazonium salts and anilines in water catalysed by copper nanoparticles on activated carbon.

An easy-to-prepare, reusable and versatile catalyst consisting of oxidised copper nanoparticles on activated carbon has been fully characterised and found to effectively promote the multicomponent synthesis of 1,2,3-triazoles from organic halides, diazonium salts, and aromatic amines in water at a low copper loading.

Green by Design: Convergent Synthesis, Computational Analyses, and Activity Evaluation of New FXa Inhibitors Bearing Peptide Triazole Linking Units.

Green chemistry implementation has led to promising results in waste reduction in the pharmaceutical industry. However, the early sustainable development of pharmaceutically active compounds and ingredients remains a considerable challenge. Herein, we wish to report a green synthesis of new pharmaceutically active peptide triazoles as potent factor Xa inhibitors, an important drug target associated with the treatment of diverse cardiovascular diseases. The new inhibitors were synthesized in three steps, featuring cycloaddition reactions (high atom economy), microwave-assisted organic synthesis (energy efficiency), and copper nanoparticle catalysis, thus featuring Earth-abundant metals. The molecules obtained showed FXa inhibition, with IC50-values as low as 17.2 µM and no associated cytotoxicity in HEK293 and HeLa cells. These results showcase the environmental potential and chemical implications of the applied methodologies for the development of new molecules with pharmacological potential.

p-Tolylimido rhenium(V) complexes - synthesis, X-ray studies, spectroscopic characterization, DFT calculations and catalytic activity.

Novel p-tolylimido rhenium(V) complexes trans-(Cl,Cl)-[Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)]·MeCN (1a), trans-(Cl,Cl)-[Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)] (1b), trans-(Br,Br)-[Re(p-NC6H4CH3)Br2(py-2-COO)(PPh3)] (2), cis-(Cl,Cl)-[Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)] (3), cis-(Br,Br)-[Re(p-NC6H4CH3)Br2(py-2-COO)(PPh3)]·H2O (4), trans-(Cl,Cl)-[Re(p-NC6H4CH3)Cl2(OMe)] (5) and trans-(Br,Br)-[Re(p-NC6H4CH3)Br2(OMe)(PPh3)2]·1/2H2O (6) were synthesized. The compounds were identified by elemental analysis, IR, NMR ((1)H, (13)C and (31)P), UV-Vis spectroscopy and X-ray crystallography. Calculations at the DFT level were undertaken in order to elucidate the structural, spectroscopic and bonding properties of the trans-(Cl,Cl) and cis-(Cl,Cl) isomers of [Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)]. In the first step, extended tests of the ability of different DFT methods (B3LYP, BP86, and PBE1PBE) were performed to find the best overall performer in describing the geometry of the imido Re(v) complexes; then, the electronic spectra of the trans and cis isomers of [Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)] were investigated at the TDDFT level employing the PBE1PBE functional. Additional information about bonding in the compounds [Re(p-NC6H4CH3)Cl2(py-2-COO)(PPh3)] was obtained by NBO analysis. The catalytic activity of the complexes incorporating the picolinate ligand was studied and compared in the synthesis of N-substituted ethyl glycine esters from ethyl diazoacetate and amines.

New routes to Cu(I)/Cu nanocatalysts for the multicomponent click synthesis of 1,2,3-triazoles.

An array of copper and copper-zinc based nanoparticles (NPs) have been fabricated employing a variety of polymeric capping agents. Analysis by TEM, XRPD and XPS suggests that by manipulating reagent, reductant and solvent conditions it is possible to achieve materials that are mono-/narrow disperse with mean particle sizes in the ≤10 nm regime. Oxidative stability in air is achieved for monometallic NPs using poly(methyl methacrylate) (PMMA) anti-agglomerant in conjunction with a variety of reducing conditions. In contrast, those encapsulated by either poly(1-vinylpyrrolidin-2-one) (PVP) or poly(4-vinylpyridine) (PVPy) rapidly show Cu(2)O formation, with all data suggesting progressive oxidation from Cu to Cu@Cu(2)O core-shell structure and finally Cu(2)O. Bimetallic copper-zinc systems, reveal metal segregation and the formation of Cu(2)O and ZnO. Catalysts have been screened in the synthesis of 1,2,3-triazoles through multicomponent azide-alkyne 1,3-dipolar cycloaddition. Whereas PMMA- and PVPy-coating results in reduced catalytic activity, those protected by PVP are highly active, with quantitative triazole syntheses achieved at room temperature and with catalyst loadings of 0.03 mol% metal for Cu and CuZn systems prepared using NaH(2)PO(2), N(2)H(4) or NaBH(4) reductants.