The Targeted Deletion of Genes Responsible for Expression of the Mth60 Fimbriae Leads to Loss of Cell-Cell Connections in Methanothermobacter thermautotrophicus ΔH.

This study is a continuation by the Environmental Biotechnology Group of the University of Tübingen in memoriam to Reinhard Wirth, who initiated the work on Mth60 fimbriae at the University of Regensburg. Growth in biofilms or biofilm-like structures is the prevailing lifestyle for most microbes in nature. The first crucial step to initiate biofilms is the adherence of microbes to biotic and abiotic surfaces. Therefore, it is crucial to elucidate the initial step of biofilm formation, which is generally established through cell-surface structures (i.e., cell appendages), such as fimbriae or pili, that adhere to biotic and abiotic surfaces. The Mth60 fimbriae of Methanothermobacter thermautotrophicus ΔH are one of only a few known archaeal cell appendages that do not assemble via the type IV pili assembly mechanism. Here, we report the constitutive expression of Mth60 fimbria-encoding genes from a shuttle-vector construct and the deletion of the Mth60 fimbria-encoding genes from the genomic DNA of M. thermautotrophicus ΔH. For this, we expanded our system for genetic modification of M. thermautotrophicus ΔH using an allelic-exchange method. While overexpression of the respective genes increased the number of Mth60 fimbriae, deletion of the Mth60 fimbria-encoding genes led to a loss of Mth60 fimbriae in planktonic cells of M. thermautotrophicus ΔH compared to the wild-type strain. This, either increased or decreased, number of Mth60 fimbriae correlated with a significant increase or decrease of biotic cell-cell connections in the respective M. thermautotrophicus ΔH strains compared to the wild-type strain. IMPORTANCE Methanothermobacter spp. have been studied for the biochemistry of hydrogenotrophic methanogenesis for many years. However, a detailed investigation of certain aspects, such as regulatory processes, was impossible due to the lack of genetic tools. Here, we amend our genetic toolbox for M. thermautotrophicus ΔH with an allelic exchange method. We report the deletion of genes that encode the Mth60 fimbriae. Our findings provide the first genetic evidence of whether the expression of these genes underlies regulation and reveal a role of the Mth60 fimbriae in the formation of cell-cell connections of M. thermautotrophicus ΔH.

Spectroscopic evidence supporting neutral thiol ligation to ferrous heme iron.

The binding of neutral thiol (ethanethiol, EtSH) or thioether (tetrahydrothiophene, THT) to two types of heme proteins in their ferrous state has been investigated with UV-visible (UV-Vis) absorption and magnetic circular dichroism spectroscopy. For the second GAF (cGMP-specific phosphodiesterases, adenylyl cyclases, and FhlA) domain from the sensory kinase MsmS (sGAF2), stepwise additions of these respective two sulfur-donor ligands to its dithionite-reduced ferrous form generate homogeneous six-coordinate low-spin ferrous complexes at both pHs 7.0 and 5.4. Similar complexes were partially formed for deoxyferrous soybean leghemoglobin with EtSH or THT within their solubility limits in water. The titrations cause significant UV-Vis spectra changes attributable to a five-coordinate to six-coordinate heme iron coordination change. For sGAF2, the resulting spectra are essentially identical for the both ligands, clearly indicating the direct binding of neutral thiol/thioether to ferrous heme iron as the distal ligand. On the other hand, the thiol EtSH binds to ferric sGAF2 in the anionic thiolate form, while thioether THT forms its ferric sGAF2 complex as a neutral ligand. These observations provide compelling evidence that neutral cysteine is a plausible ligand for ferrous heme proteins.

A heme-based redox sensor in the methanogenic archaeon Methanosarcina acetivorans.

Based on a bioinformatics study, the protein MA4561 from the methanogenic archaeon Methanosarcina acetivorans was originally predicted to be a multidomain phytochrome-like photosensory kinase possibly binding open-chain tetrapyrroles. Although we were able to show that recombinantly produced and purified protein does not bind any known phytochrome chromophores, UV-visible spectroscopy revealed the presence of a heme tetrapyrrole cofactor. In contrast to many other known cytoplasmic heme-containing proteins, the heme was covalently attached via one vinyl side chain to cysteine 656 in the second GAF domain. This GAF domain by itself is sufficient for covalent attachment. Resonance Raman and magnetic circular dichroism data support a model of a six-coordinate heme species with additional features of a five-coordination structure. The heme cofactor is redox-active and able to coordinate various ligands like imidazole, dimethyl sulfide, and carbon monoxide depending on the redox state. Interestingly, the redox state of the heme cofactor has a substantial influence on autophosphorylation activity. Although reduced protein does not autophosphorylate, oxidized protein gives a strong autophosphorylation signal independent from bound external ligands. Based on its genomic localization, MA4561 is most likely a sensor kinase of a two-component system effecting regulation of the Mts system, a set of three homologous corrinoid/methyltransferase fusion protein isoforms involved in methyl sulfide metabolism. Consistent with this prediction, an M. acetivorans mutant devoid of MA4561 constitutively synthesized MtsF. On the basis of our results, we postulate a heme-based redox/dimethyl sulfide sensory function of MA4561 and propose to designate it MsmS (methyl sulfide methyltransferase-associated sensor).

Methanothermobacter thermautotrophicus and Alternative Methanogens: Archaea-Based Production.

Methanogenic archaea convert bacterial fermentation intermediates from the decomposition of organic material into methane. This process has relevance in the global carbon cycle and finds application in anthropogenic processes, such as wastewater treatment and anaerobic digestion. Furthermore, methanogenic archaea that utilize hydrogen and carbon dioxide as substrates are being employed as biocatalysts for the biomethanation step of power-to-gas technology. This technology converts hydrogen from water electrolysis and carbon dioxide into renewable natural gas (i.e., methane). The application of methanogenic archaea in bioproduction beyond methane has been demonstrated in only a few instances and is limited to mesophilic species for which genetic engineering tools are available. In this chapter, we discuss recent developments for those existing genetically tractable systems and the inclusion of novel genetic tools for thermophilic methanogenic species. We then give an overview of recombinant bioproduction with mesophilic methanogenic archaea and thermophilic non-methanogenic microbes. This is the basis for discussing putative products with thermophilic methanogenic archaea, specifically the species Methanothermobacter thermautotrophicus. We give estimates of potential conversion efficiencies for those putative products based on a genome-scale metabolic model for M. thermautotrophicus.

Acetate augmentation boosts the ethanol production rate and specificity by Clostridium ljungdahlii during gas fermentation with pure carbon monoxide.

Recycling waste gases from industry is vital for the transition toward a circular economy. The model microbe Clostridium ljungdahlii reduces carbon from syngas and primarily produces acetate and ethanol. Here, a gas fermentation experiment is presented in chemostats with C. ljungdahlii and pure carbon monoxide (CO) as feedstock while entirely omitting yeast extract. A maximum ethanol production rate of 0.07 ± 0.01 g L-1 h-1 and a maximum average ethanol/acetate ratio of 1.41 ± 0.39 was observed under steady-state conditions. This confirmed that CO as the sole feedstock pushes the metabolism toward more reduced fermentation products. This effect was even more pronounced when 15 mM sodium acetate was added to the feed medium. An ethanol production rate of 0.23 ± 0.01 g L-1 h-1 was achieved, representing an increase of more than 240%. This increase was accompanied by an increase in cell density and selectivity toward ethanol, with a maximum average ethanol/acetate ratio of 92.96 ± 28.39. Oxygen contaminations voided this effect, although the cultures were still able to maintain a stable biomass concentration and ethanol production rate. These findings highlight the potential of CO-fermentation with acetate augmentation and the importance of preventing oxygen contaminations.

An integrated systems biology approach reveals differences in formate metabolism in the genus Methanothermobacter.

Methanogenesis allows methanogenic archaea to generate cellular energy for their growth while producing methane. Thermophilic hydrogenotrophic species of the genus Methanothermobacter have been recognized as robust biocatalysts for a circular carbon economy and are already applied in power-to-gas technology with biomethanation, which is a platform to store renewable energy and utilize captured carbon dioxide. Here, we generated curated genome-scale metabolic reconstructions for three Methanothermobacter strains and investigated differences in the growth performance of these same strains in chemostat bioreactor experiments with hydrogen and carbon dioxide or formate as substrates. Using an integrated systems biology approach, we identified differences in formate anabolism between the strains and revealed that formate anabolism influences the diversion of carbon between biomass and methane. This finding, together with the omics datasets and the metabolic models we generated, can be implemented for biotechnological applications of Methanothermobacter in power-to-gas technology, and as a perspective, for value-added chemical production.

An Interdomain Conjugation Protocol for Plasmid-DNA Transfer into Methanothermobacter thermautotrophicus ΔH.

Methanogenic archaea of the order Methanobacteriales are widespread in anaerobic environments and play pivotal roles in microbial communities. The family of Methanobacteriaceae encompasses mesophilic and thermophilic hydrogenotrophic species. Mesophilic species are found in various natural and anthropogenic environments (e.g., are associated with the microbiome in animals and humans). Thermophilic species can be found in thermally active bogs and warm sulfuric springs, but also in anthropogenic environments, such as wastewater treatment plants and anaerobic digesters. Recently, genetic tools for Methanothermobacter thermautotrophicus ΔH, as the first representative of this order of methanogenic archaea, were successfully implemented. This protocol describes the methods for interdomain conjugational DNA transfer from Escherichia coli to M. thermautotrophicus ΔH with shuttle-vector plasmid DNA, which allows the genetic manipulation of this microbe, and provides a basis for the development of further genetic methods for this and potentially other representatives of Methanobacteriales.

Recycling carbon for sustainable protein production using gas fermentation.

Current food production practices contribute significantly to climate change. To transition into a sustainable future, a combination of new food habits and a radical food production innovation must occur. Single-cell protein from microbial fermentation can profoundly impact sustainability. This review paper explores opportunities offered by gas fermentation to completely replace our reliance on fossil fuels for the production of food. Together with synthetic biology, designed microbial proteins from gas fermentation have the potential to reduce our dependence on fossil fuels and make food production more sustainable.

Genetic Evidence Reveals the Indispensable Role of the rseC Gene for Autotrophy and the Importance of a Functional Electron Balance for Nitrate Reduction in Clostridium ljungdahlii.

For Clostridium ljungdahlii, the RNF complex plays a key role for energy conversion from gaseous substrates such as hydrogen and carbon dioxide. In a previous study, a disruption of RNF-complex genes led to the loss of autotrophy, while heterotrophy was still possible via glycolysis. Furthermore, it was shown that the energy limitation during autotrophy could be lifted by nitrate supplementation, which resulted in an elevated cellular growth and ATP yield. Here, we used CRISPR-Cas12a to delete: (1) the RNF complex-encoding gene cluster rnfCDGEAB; (2) the putative RNF regulator gene rseC; and (3) a gene cluster that encodes for a putative nitrate reductase. The deletion of either rnfCDGEAB or rseC resulted in a complete loss of autotrophy, which could be restored by plasmid-based complementation of the deleted genes. We observed a transcriptional repression of the RNF-gene cluster in the rseC-deletion strain during autotrophy and investigated the distribution of the rseC gene among acetogenic bacteria. To examine nitrate reduction and its connection to the RNF complex, we compared autotrophic and heterotrophic growth of our three deletion strains with either ammonium or nitrate. The rnfCDGEAB- and rseC-deletion strains failed to reduce nitrate as a metabolic activity in non-growing cultures during autotrophy but not during heterotrophy. In contrast, the nitrate reductase deletion strain was able to grow in all tested conditions but lost the ability to reduce nitrate. Our findings highlight the important role of the rseC gene for autotrophy, and in addition, contribute to understand the connection of nitrate reduction to energy metabolism.

A Shuttle-Vector System Allows Heterologous Gene Expression in the Thermophilic Methanogen Methanothermobacter thermautotrophicus ΔH.

Thermophilic Methanothermobacter spp. are used as model microbes to study the physiology and biochemistry of the conversion of molecular hydrogen and carbon dioxide into methane (i.e., hydrogenotrophic methanogenesis). Yet, a genetic system for these model microbes was missing despite intensive work for four decades. Here, we report the successful implementation of genetic tools for Methanothermobacter thermautotrophicus ΔH. We developed shuttle vectors that replicated in Escherichia coli and M. thermautotrophicus ΔH. For M. thermautotrophicus ΔH, a thermostable neomycin resistance cassette served as the selectable marker for positive selection with neomycin, and the cryptic plasmid pME2001 from Methanothermobacter marburgensis served as the replicon. The shuttle-vector DNA was transferred from E. coli into M. thermautotrophicus ΔH via interdomain conjugation. After the successful validation of DNA transfer and positive selection in M. thermautotrophicus ΔH, we demonstrated heterologous gene expression of a thermostable ß-galactosidase-encoding gene (bgaB) from Geobacillus stearothermophilus under the expression control of four distinct synthetic and native promoters. In quantitative in-vitro enzyme activity assay, we found significantly different ß-galactosidase activity with these distinct promoters. With a formate dehydrogenase operon-encoding shuttle vector, we allowed growth of M. thermautotrophicus ΔH on formate as the sole growth substrate, while this was not possible for the empty-vector control. IMPORTANCE The world economies are facing permanently increasing energy demands. At the same time, carbon emissions from fossil sources need to be circumvented to minimize harmful effects from climate change. The power-to-gas platform is utilized to store renewable electric power and decarbonize the natural gas grid. The microbe Methanothermobacter thermautotrophicus is already applied as the industrial biocatalyst for the biological methanation step in large-scale power-to-gas processes. To improve the biocatalyst in a targeted fashion, genetic engineering is required. With our shuttle-vector system for heterologous gene expression in M. thermautotrophicus, we set the cornerstone to engineer the microbe for optimized methane production but also for production of high-value platform chemicals in power-to-x processes.

Nitrate Feed Improves Growth and Ethanol Production of Clostridium ljungdahlii With CO2 and H2, but Results in Stochastic Inhibition Events.

The pH-value in fermentation broth is a critical factor for the metabolic flux and growth behavior of acetogens. A decreasing pH level throughout time due to undissociated acetic acid accumulation is anticipated under uncontrolled pH conditions such as in bottle experiments. As a result, the impact of changes in the metabolism (e.g., due to a genetic modification) might remain unclear or even unrevealed. In contrast, pH-controlled conditions can be achieved in bioreactors. Here, we present a self-built, comparatively cheap, and user-friendly multiple-bioreactor system (MBS) consisting of six pH-controlled bioreactors at a 1-L scale. We tested the functionality of the MBS by cultivating the acetogen Clostridium ljungdahlii with CO2 and H2 at steady-state conditions (=chemostat). The experiments (total of 10 bioreactors) were addressing the two questions: (1) does the MBS provide replicable data for gas-fermentation experiments?; and (2) does feeding nitrate influence the product spectrum under controlled pH conditions with CO2 and H2? We applied four different periods in each experiment ranging from pH 6.0 to pH 4.5. On the one hand, our data showed high reproducibility for gas-fermentation experiments with C. ljungdahlii under standard cultivation conditions using the MBS. On the other hand, feeding nitrate as sole N-source improved growth by up to 62% and ethanol production by 2-3-fold. However, we observed differences in growth, and acetate and ethanol production rates between all nitrate bioreactors. We explained the different performances with a pH-buffering effect that resulted from the interplay between undissociated acetic acid production and ammonium production and because of stochastic inhibition events, which led to complete crashes at different operating times.

Reprogramming Acetogenic Bacteria with CRISPR-Targeted Base Editing via Deamination.

Acetogenic bacteria are rising in popularity as chassis microbes for biotechnology due to their capability of converting inorganic one-carbon (C1) gases to organic chemicals. To fully uncover the potential of acetogenic bacteria, synthetic biology tools are imperative to either engineer designed functions or to interrogate the physiology. Here, we report a genome-editing tool at a one-nucleotide resolution, namely base editing, for acetogenic bacteria based on CRISPR-targeted deamination. This tool combines nuclease deactivated Cas9 with activation-induced cytidine deaminase to enable cytosine-to-thymine substitution without DNA cleavage, homology-directed repair, and donor DNA, which are generally the bottlenecks for applying conventional CRISPR-Cas systems in bacteria. We designed and validated a modularized base-editing tool in the model acetogenic bacterium Clostridium ljungdahlii. The editing principles were investigated, and an in-silico analysis revealed the capability of base editing across the genome and the potential for off-target events. Moreover, genes related to acetate and ethanol production were disrupted individually by installing premature STOP codons to reprogram carbon flux toward improved acetate production. This resulted in engineered C. ljungdahlii strains with the desired phenotypes and stable genotypes. Our base-editing tool promotes the application and research in acetogenic bacteria and provides a blueprint to upgrade CRISPR-Cas-based genome editing in bacteria in general.

Overcoming the energetic limitations of syngas fermentation.

The fermentation of synthesis gas (including carbon monoxide, carbon dioxide, and hydrogen) with anaerobic acetogens is an established biotechnological process that has recently been transferred to a commercial scale. The natural product spectrum of acetogens is natively restricted to acetate, ethanol, and 2,3-butanediol but is rapidly expanding to heterologous products. Syngas fermentation can achieve high carbon-efficiencies; however, the underlying metabolism is operating at a thermodynamic limit. This necessitates special enzymatic properties for energy conservation by acetogens. Therefore, the availability of cellular energy is considered to restrain the efficient production of energy-intense products with complex production pathways. The optimization of the feed-gas composition and other process parameters, genetic engineering, and integration with other biotechnologies is required to overcome this limitation.

Metabolic engineering of Rhodopseudomonas palustris for the obligate reduction of n-butyrate to n-butanol.

BACKGROUND: Rhodopseudomonas palustris is a versatile microbe that encounters an innate redox imbalance while growing photoheterotrophically with reduced substrates. The resulting excess in reducing equivalents, together with ATP from photosynthesis, could be utilized to drive a wide range of bioconversions. The objective of this study was to genetically modify R. palustris to provide a pathway to reduce n-butyrate into n-butanol for maintaining redox balance. RESULTS: Here, we constructed and expressed a plasmid-based pathway for n-butanol production from Clostridium acetobutylicum ATCC 824 in R. palustris. We maintained the environmental conditions in such a way that this pathway functioned as the obligate route to re-oxidize excess reducing equivalents, resulting in an innate selection pressure. The engineered strain of R. palustris grew under otherwise restrictive redox conditions and achieved concentrations of 1.5 mM n-butanol at a production rate of 0.03 g L-1 day-1 and a selectivity (i.e., products compared to the consumed substrate) of close to 40%. Since the theoretical maximum selectivity is 45%, the engineered strain converted close to its maximum selectivity. CONCLUSIONS: The innate redox imbalance of R. palustris can be used to drive the reduction of n-butyrate into n-butanol after expression of a plasmid-based enzyme from a butanol-producing Clostridium strain.

Upgrading syngas fermentation effluent using Clostridium kluyveri in a continuous fermentation.

BACKGROUND: The product of current syngas fermentation systems is an ethanol/acetic acid mixture and the goal is to maximize ethanol recovery. However, ethanol currently has a relatively low market value and its separation from the fermentation broth is energy intensive. We can circumvent these disadvantages of ethanol production by converting the dilute ethanol/acetic acid mixture into products with longer carbon backbones, which are of higher value and are more easily extracted than ethanol. Chain elongation, which is the bioprocess in which ethanol is used to elongate short-chain carboxylic acids to medium-chain carboxylic acids (MCCAs), has been studied with pure cultures and open cultures of microbial consortia (microbiomes) with several different substrates. While upgrading syngas fermentation effluent has been studied with open cultures, to our knowledge, no study exists that has performed this with pure cultures. RESULTS: Here, pure cultures of Clostridium kluyveri were used in continuous bioreactors to convert ethanol/acetic acid mixtures into MCCAs. Besides changing the operating conditions in regards to substrate loading rates and composition, the effect of in-line product extraction, pH, and the use of real syngas fermentation effluent on production rates were tested. Increasing the organic loading rates resulted in proportionally higher production rates of n-caproic acid, which were up to 40 mM day-1 (4.64 g L-1 day-1) at carbon conversion efficiencies of 90% or higher. The production rates were similar for bioreactors with and without in-line product extraction. Furthermore, a lower ethanol/acetic acid ratio (3:1 instead of 10:1) enabled faster and more efficient n-caproic acid production. In addition, n-caprylic acid production was observed for the first time with C. kluyveri (up to 2.19 ± 0.34 mM in batch). Finally, the use of real effluent from syngas fermentation, without added yeast extract, but with added defined growth factors, did maintain similar production rates. Throughout the operating period, we observed that the metabolism of C. kluyveri was inhibited at a mildly acidic pH value of 5.5 compared to a pH value of 7.0, while reactor microbiomes perform successfully at mildly acidic conditions. CONCLUSIONS: Clostridium kluyveri can be used as a biocatalyst to upgrade syngas fermentation effluent into MCCAs at pH values above 5.5.

A Narrow pH Range Supports Butanol, Hexanol, and Octanol Production from Syngas in a Continuous Co-culture of Clostridium ljungdahlii and Clostridium kluyveri with In-Line Product Extraction.

Carboxydotrophic bacteria (CTB) have received attention due to their ability to synthesize commodity chemicals from producer gas and synthesis gas (syngas). CTB have an important advantage of a high product selectivity compared to chemical catalysts. However, the product spectrum of wild-type CTB is narrow. Our objective was to investigate whether a strategy of combining two wild-type bacterial strains into a single, continuously fed bioprocessing step would be promising to broaden the product spectrum. Here, we have operated a syngas-fermentation process with Clostridium ljungdahlii and Clostridium kluyveri with in-line product extraction through gas stripping and product condensing within the syngas recirculation line. The main products from C. ljungdahlii fermentation at a pH of 6.0 were ethanol and acetate at net volumetric production rates of 65.5 and 431 mmol C·L-1·d-1, respectively. An estimated 2/3 of total ethanol produced was utilized by C. kluyveri to chain elongate with the reverse ß-oxidation pathway, resulting in n-butyrate and n-caproate at net rates of 129 and 70 mmol C·L-1·d-1, respectively. C. ljungdahlii likely reduced the produced carboxylates to their corresponding alcohols with the reductive power from syngas. This resulted in the longer-chain alcohols n-butanol, n-hexanol, and n-octanol at net volumetric production rates of 39.2, 31.7, and 0.045 mmol C·L-1·d-1, respectively. The continuous production of the longer-chain alcohols occurred only within a narrow pH spectrum of 5.7-6.4 due to the pH discrepancy between the two strains. Regardless whether other wild-type strains could overcome this pH discrepancy, the specificity (mol carbon in product per mol carbon in all other liquid products) for each longer-chain alcohol may never be high in a single bioprocessing step. This, because two bioprocesses compete for intermediates (i.e., carboxylates): (1) chain elongation; and (2) biological reduction. This innate competition resulted in a mixture of n-butanol and n-hexanol with traces of n-octanol.

Expanding the molecular toolkit for the homoacetogen Clostridium ljungdahlii.

Increasing interest in homoacetogenic bacteria for the production of biochemicals and biofuels requisites the development of new genetic tools for these atypical production organisms. An attractive host for the conversion of synthesis gas or electricity into multi-carbon compounds is Clostridium ljungdahlii. So far only limited achievements in modifying this organism towards the production of industrially relevant compounds have been made. Therefore, there is still a strong need for developing new and optimizing existing genetic tools to efficiently access its metabolism. Here, we report on the development of a stable and reproducible transformation protocol that is applicable to C. ljungdahlii and several other clostridial species. Further, we demonstrate the functionality of a temperature-sensitive origin of replication in combination with a fluorescence marker system as important tools for future genetic engineering of this host for microbial bioproduction.

Carbon recovery by fermentation of CO-rich off gases - Turning steel mills into biorefineries.

Technological solutions to reduce greenhouse gas (GHG) emissions from anthropogenic sources are required. Heavy industrial processes, such as steel making, contribute considerably to GHG emissions. Fermentation of carbon monoxide (CO)-rich off gases with wild-type acetogenic bacteria can be used to produce ethanol, acetate, and 2,3-butanediol, thereby, reducing the carbon footprint of heavy industries. Here, the processes for the production of ethanol from CO-rich off gases are discussed and a perspective on further routes towards an integrated biorefinery at a steel mill is given. Recent achievements in genetic engineering as well as integration of other biotechnology platforms to increase the product portfolio are summarized. Already, yields have been increased and the portfolio of products broadened. To develop a commercially viable process, however, the extraction from dilute product streams is a critical step and alternatives to distillation are discussed. Finally, another critical step is waste(water) treatment with the possibility to recover resources.

Heme oxygenases from Arabidopsis thaliana reveal different mechanisms of carbon monoxide binding.

Heme oxygenases (HO) are widely distributed enzymes involved in the degradation of heme to biliverdin, carbon monoxide and Fe(2+). The model plant Arabidopsis thaliana possesses three functional HOs (HY1, HO3 and HO4) which are thus far biochemically indistinguishable. Here, we investigate binding of the reaction product and putative inhibitor CO to these three HOs with various spectroscopic techniques: Nanosecond time-resolved absorption, millisecond time-resolved multi-wavelength absorption and Fourier-transform-infrared difference spectroscopy. Kinetics of CO rebinding were found to differ substantially among the HOs. At low CO concentrations a novel intermediate was identified for HO3 and HO4, substantially slowing down rebinding. All HOs show relatively slow geminate rebinding of CO indicating the existence of an additional transient binding niche for CO. The positions found for the IR absorptions of ν(CO) and ν(FeC) suggest a nonpolar distal binding site for all three HOs. The frequency of the ν(FeC) vibration was calculated by a combination band on which we report here for the first time. Another band in the FTIR difference spectrum could be assigned to a histidine residue, probably the proximal ligand of the heme-iron. The observed different rebinding kinetics among the HOs could indicate adaptation of the HOs to different environments.