Polarization microscopy probe for applications in a high magnetic field.

A microscopy probe designed for use in high field magnets is presented. It was developed to observe and continuously measure the position and shape of a magnetically driven grain boundary in a magnetically anisotropic material. The approach utilizes the anisotropy of reflectivity of visible light for orientation contrast to determine the boundary location. The major components of the system are the polarizing microscope with video camera and the sample chamber with a resistive heater for annealing at elevated temperatures up to 500 degrees C in an inert gas atmosphere. The results of test measurements are presented.

Laser powered heating stage in a scanning electron microscope for microstructural investigations at elevated temperatures.

A laser powered heating stage designed for application in high vacuum environment of a scanning electron microscope (SEM) is presented. It was developed to observe and characterize microstructural changes in crystalline materials at elevated temperatures up to 1000 degrees C. The approach utilizes the power output of a commercial infrared diode laser in order to heat up specimens without interference with the electronic system of the SEM. The heating stage can be used in combination with any standard characterization technique applicable for SEMs--electron backscatter diffraction, orientation contrast imaging, x-ray energy dispersive spectrometry, etc. The results of test measurements are presented.

Modeling the Effect of Primary and Secondary Twinning on Texture Evolution during Severe Plastic Deformation of a Twinning-Induced Plasticity Steel.

Modeling the effect of deformation twinning and the ensuing twin-twin- and slip-twin-induced hardening is a long-standing problem in computational mechanical metallurgy of materials that deform by both slip and twinning. In this work, we address this effect using the twin volume transfer method, which obviates the need of any cumbersome criterion for twin variant selection. Additionally, this method is capable of capturing, at the same time, secondary or double twinning, which is particularly important for modeling in large strain regimes. We validate our modeling methodology by simulating the behavior of an Fe-23Mn-1.5Al-0.3C twinning-induced plasticity (TWIP) steel under large strain conditions, experimentally achieved in this work through equal-channel angular pressing (ECAP) for up to two passes in a 90° die following route BC at 300 °C. Each possible twin variant, whether nucleating inside the parent grain or inside a potential primary twin variant was predefined in the initial list of orientations as possible grain of the polycrystal with zero initial volume fraction. A novelty of our approach is to take into account the loss of coherency of the twins with their parent matrix under large strains, obstructing progressively their further growth. This effect has been captured by attenuating growth rates of twins as a function of their rotation away from their perfect twin orientation, dubbed here as "disorientation" with respect to the mother grain's lattice. The simulated textures and the hardening under tensile strain showed very good agreement with experimental characterization and mechanical testing results. Furthermore, upper-bound Taylor deformation was found to be operational for the TWIP steel deformation when all the above ingredients of twinning are captured, indicating that self-consistent schemes can be bypassed.

Acoustic Emission of Deformation Twinning in Magnesium.

The Acoustic Emission of deformation twinning in Magnesium is investigated in this article. Single crystal testing with combined full field deformation measurements, as well as polycrystalline testing inside the scanning electron microscope with simultaneous monitoring of texture evolution and twin nucleation were compared to testing at the laboratory scale with respect to recordings of Acoustic Emission activity. Single crystal testing revealed the formation of layered twin boundaries in areas of strain localization which was accompanied by distinct changes in the acoustic data. Testing inside the microscope directly showed twin nucleation, proliferation and growth as well as associated crystallographic reorientations. A post processing approach of the Acoustic Emission activity revealed the existence of a class of signals that appears in a strain range in which twinning is profuse, as validated by the in situ and ex situ microscopy observations. Features extracted from such activity were cross-correlated both with the available mechanical and microscopy data, as well as with the Acoustic Emission activity recorded at the laboratory scale for similarly prepared specimens. The overall approach demonstrates that the method of Acoustic Emission could provide real time volumetric information related to the activation of deformation twinning in Magnesium alloys, in spite of the complexity of the propagation phenomena, the possible activation of several deformation modes and the challenges posed by the sensing approach itself when applied in this type of materials evaluation approach.