RESUMO
A series of mononuclear manganese(III)-hydroxo and -aqua complexes, [MnIII(TBDAP)(OH)2]+ (1), [MnIII(TBDAP)(OH)(OH2)]2+ (2) and [MnIII(TBDAP)(OH2)2]3+ (3), were prepared from a manganese(II) precursor and confirmed using various methods including X-ray crystallography. Thermodynamic analysis showed that protonation from hydroxo to aqua species resulted in increased redox potentials (E1/2) in the order of 1 (-0.15 V) < 2 (0.56 V) < 3 (1.11 V), while pKa values exhibited a reverse trend in the order of 3 (3.87) < 2 (11.84). Employing the Bordwell Equation, the O-H bond dissociation free energies (BDFE) of [MnII(TBDAP)(OH)(OH2)]+ and [MnII(TBDAP)(OH2)2]2+, related to the driving force of 1 and 2 in hydrogen atom transfer (HAT), were determined as 75.3 and 77.3 kcal mol-1, respectively. It was found that the thermodynamic driving force of 2 in HAT becomes greater than that of 1 as the redox potential of 2 increases through protonation from 1 to 2. Kinetic studies on electrophilic reactions using a variety of substrates revealed that 1 is only weakly reactive with O-H bonds, whereas 2 can activate aliphatic C-H bonds in addition to O-H bonds. The reaction rates increased by 1.4 × 104-fold for the O-H bonds by 2 over 1, which was explained by the difference in BDFE and the tunneling effect. Furthermore, 3, possessing the highest redox potential value, was found to undergo an aromatic C-H bond activation reaction under mild conditions. These results provide valuable insights into enhancing electrophilic reactivity by modulating the redox potential of manganese(III)-hydroxo and -aqua complexes through protonation.
RESUMO
Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.
RESUMO
Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries for large-scale energy storage systems due to the abundance and low price of sodium. Until recently, the low theoretical capacities of intercalation-type cathodes less than 250 mAh g-1 have limited the energy density of SIBs. On the other hand, iron oxyfluoride (FeOF) has a high theoretical capacity of ≈885 mAh g-1 as a conversion-type cathode material for SIBs. However, FeOF suffers from poor cycling stability, rate capability, and low initial Coulombic efficiency caused by its low electrical conductivity and slow ionic diffusion kinetics. To solve these problems, doping aliovalent Ni2+ on FeOF electrodes is attempted to improve the electronic conductivity without using a carbon matrix. The ionic conductivity of FeOF is also enhanced due to the formation of oxygen defects in the FeOF crystal structure. The FeOF-Ni1 electrode shows an excellent cycling performance with a reversible discharge capacity of 450.4 mAh g-1 at 100 mAh g-1 after 100 cycles with a fading rate of 0.20% per cycle. In addition, the FeOF-Ni1//hard carbon full cell exhibited a high energy density of 876.9 Wh kg-1 cathode with a good cycling stability.
RESUMO
Siloxanes have long been known for their highly desirable properties suited for a wide range of practical applications; however, their utilization as modular building blocks for crystalline open frameworks has been limited. In this study, a simple solvothermal pathway has been found to synthesize unprecedented Zn(II)-siloxane clusters supported by acetate ligands, [(RSiO2)8Zn8(CH3CO2)8] (R = Me or Ph). The same reaction using a dicarboxylate ligand such as 1,4-benzenedicarboxylate or 2,6-naphthalenedicarboxylate produces a new type of metal-organic framework, named SiMOF here, based on the [Si8Zn8] units. With the maximum connectivity of 8, the building block is shown to form topologically interesting structures such as octahedral supercages or uninodal 8-connected frameworks. All SiMOFs synthesized possess permanent porosity and high thermal stability and are naturally hydrophobic, as demonstrated by adsorptions of toluene, ethanol, methanol, and water vapor as well as water contact angle measurements. These promising characteristics for well-defined porous solids are attributed to metal-bound siloxane groups in the structural building units.
RESUMO
A series of cobalt(III)-peroxo complexes, [CoIII(R2-TBDAP)(O2)]+ (1R2; R2 = Cl, H, and OMe), and cobalt(III)-hydroperoxo complexes, [CoIII(R2-TBDAP)(O2H)(CH3CN)]2+ (2R2), bearing electronically tuned tetraazamacrocyclic ligands (R2-TBDAP = N,N'-di-tert-butyl-2,11-diaza[3.3](2,6)-p-R2-pyridinophane) were prepared from their cobalt(II) precursors and characterized by various physicochemical methods. The X-ray diffraction and spectroscopic analyses unambiguously showed that all 1R2 compounds have similar octahedral geometry with a side-on peroxocobalt(III) moiety, but the O-O bond lengths of 1Cl [1.398(3) Å] and 1OMe [1.401(4) Å] were shorter than that of 1H [1.456(3) Å] due to the different spin states. For 2R2, the O-O bond vibration energies of 2Cl and 2OMe were identical at 853 cm-1 (856 cm-1 for 2H), but their Co-O bond vibration frequencies were observed at 572 cm-1 for 2Cl and 550 cm-1 for 2OMe, respectively, by resonance Raman spectroscopy (560 cm-1 for 2H). Interestingly, the redox potentials (E1/2) of 2R2 increased in the order of 2OMe (0.19 V) < 2H (0.24 V) < 2Cl (0.34 V) according to the electron richness of the R2-TBDAP ligands, but the oxygen-atom-transfer reactivities of 2R2 showed a reverse trend (k2: 2Cl < 2H < 2OMe) with a 13-fold rate enhancement at 2OMe over 2Cl in a sulfoxidation reaction with thioanisole. Although the reactivity trend contradicts the general consideration that electron-rich metal-oxygen species with low E1/2 values have sluggish electrophilic reactivity, this could be explained by a weak Co-O bond vibration of 2OMe in the unusual reaction pathway. These results provide considerable insight into the electronic nature-reactivity relationship of metal-oxygen species.
RESUMO
A new synthetic approach for tunable mesoporous metal-organic frameworks (MeMs) is developed. In this approach, mesopores are created in the process of heat conversion of highly mosaic metal-organic framework (MOF) crystals with non-interpenetrated low-density nanocrystallites into MOF crystals with two-fold interpenetrated high-density nanocrystallites. The two-fold interpenetration reduces the volume of the nanocrystallites in the mosaic crystal, and the accompanying localized agglomeration of the nanocrystallites results in the formation of mesopores among the localized crystallite agglomerates. The pore size can be easily modulated from 7 to 90 nm by controlling the heat treatment conditions, that is, the aging temperature and aging time. Various proteins can be encapsulated in the MeM, and immobilized enzymes show catalyst activity comparable to that of the free native enzymes. Immobilized ß-galactosidase is recyclable and the enzyme activity of the immobilized catalase is maintained after exposure to high temperatures and various organic solvents.
Assuntos
Enzimas Imobilizadas , Estruturas Metalorgânicas , Catálise , Enzimas Imobilizadas/metabolismo , Estruturas Metalorgânicas/química , TemperaturaRESUMO
Five ternary and quaternary Zintl phases in the solid-solution Ca11-xAxSb10-yGez (A = Na, Li; 0.06(3) ≤ x ≤ 0.17(5), 0.19(1) ≤ y ≤ 0.55(1), 0.13(1) ≤ z ≤ 0.22(1)) system have been successfully synthesized by both of the arc-melting and the molten Pb metal-flux reactions. The crystal structure of these title compounds was characterized by powder and single-crystal X-ray diffractions analyses, and all title compounds crystallized in the Ho11Ge10-type phase in the tetragonal space group I4/mmm (Z = 4, Pearson code tI84). The complex crystal structure can be described as an assembly of 1) three kinds of cationic polyhedra centered by three different Sb and 2) the cage-shaped anionic frameworks built through the connection of two types of Sb. The newly substituted p-type double dopants of the cationic (Na and Li) and anionic (Ge) elements displayed particular site preferences, which were successfully explained by either the size-factor criterion based on the atomic size or the electronic-factor criterion based on the electronegativity of an element. Quite interestingly, as the reaction conditions were changed, the morphology shift of single crystals in Ca10.94(3)Na0.06Sb9.58(1)Ge0.21 occurred from a cubic-shaped to a hummocky-type, to a hopper-type, and eventually to an octahedral-shaped crystal, just like the Yakutian kimberlite diamonds. Moreover, we firmly believe that the inclusion of the p-type Ge dopant for Sb was crucial to trigger this type of morphology shift and complete the octahedral-shaped morphology in the overall crystal-growth mechanism. The theoretical calculations using a DFT method rationalized the observed site preference of Na and the electronic effect of the p-type Ge dopants. The Seebeck coefficient measurements for Ca10.88(4)Li0.12Sb9.45(1)Ge0.21 indicated that some portions of electron charge carriers were effectively eliminated by the p-type double dopants using Li and Ge.
RESUMO
The Pd-catalyzed asymmetric addition reaction of ß-keto acids to heteroatom-substituted allene is reported. This reaction generates ß-substituted ketones in an asymmetric manner through a branch-selective decarboxylative allylation pathway. The reaction accommodates various alkoxyallenes as well as amidoallenes.
RESUMO
The self-assembly of PdX2 (X- = ClO4- and PF6-) with C3-symmetric l- and d-L [L = (2S,2'S,2â³S)- and (2R,2'R,2â³R)-[benzenetricarbonyltris(azanediyl)]tris(3-phenylpropane-2,1-diyl)triisonicotinate] produces the chiral nanocube pair [Pd6(l-L)8](X)12 and [Pd6(d-L)8](X)12 (X- = ClO4- and PF6-, respectively) with an inner cavity of 12.3 × 12.3 × 12.3 Å3. These chiral nanocubes are effective for the enantiorecognition of various chiral amino acids via the square-wave-voltammetry technique. In the present study, the site of enantiorecognition was confirmed by density functional theory calculated interactions between each nanocube and the chiral amino acids, and the calculated interactions were coincident with the shifts of the electrochemical oxidation potentials.
RESUMO
A series of quaternary and quinary Zintl phase thermoelectric (TE) compounds, Ca5-xYbxAl2-yInySb6 (3.07(1) ≤ x ≤ 4.88(2); 0.16(2) ≤ y ≤ 2.00), containing Al/In mixed sites as well as Ca/Yb mixed sites has been successfully synthesized by a direct arc-melting method, and the X-ray diffraction analyses indicated that the products initially adopted an orthorhombic Ba5Al2Bi6-type structure (space group Pbam, Z = 2). However, after a postannealing process at 973 K for 1 month, the particular Yb rich compounds underwent a transformation of the original structure type to a Ca5Ga2Sb6-type phase regardless of the In substitution for Al. The noticeable site preference of cationic Ca and Yb in the three available cationic sites could be understood on the basis of a size match between the central cation and the volume of the anionic polyhedra. The observed phase transition was nicely explained by DFT calculations, proving that the Ca5Ga2Sb6-type phase was energetically more favorable than the Ba5Al2Sb6-type phase for the particular Yb-rich compound. Moreover, this energy difference between the two title phases was originally the result of both the site energy in the Ca site and the bond energies in the [(Al/In)2Sb8] anionic building blocks. A series of thermoelectric property data indicated that a two-step process involving a partial/full In substitution for Al and a phase transition from the Ba5Al2Sb6-type to the Ca5Ga2Sb6-type phase successfully enhanced the electrical conductivities and the Seebeck coefficients of the title compounds. This kind of combined effect eventually resulted in a ZT improvement for the quinary compound Ca1.14(2)Yb3.86Al1.68(1)In0.32Sb6 by approximately 4 times in comparison to its quaternary predecessor Ca1.55(1)Yb3.45Al2Sb6.
RESUMO
We report the dual postsynthetic modification (PSM) of a metal-organic framework (MOF) involving the microscopic conversion of C-H bonds into C-C bonds and the mesoscopic introduction of hierarchical porosity. MOF crystals underwent single-crystal-to-single-crystal transformations during the electrophilic aromatic substitution of Co2 (m-DOBDC) (m-DOBDC4- =4,6-dioxo-1,3-benzenedicarboxylate) with alkyl halides and formaldehyde. The steric hindrance caused by the proximity of the introduced functional groups to the coordination bonds reduced bond stability and facilitated the transformation into hierarchically porous mesostructures by etching with in situ generated protons (hydroniums) and halides. The numerous defect sites in the mesostructural MOFs are potential water-sorption sites. However, since the introduced functional groups are close to the main adsorption sites, even methyl groups are able to considerably decrease water adsorption, whereas hydroxy groups increase adsorption at low vapor pressures.
RESUMO
Enhancement of hydrolytic stability of metal-organic frameworks (MOFs) is a challenging issue in MOF chemistry because most MOFs have shown limitations in their applications under a humid environment. Meanwhile, inner sphere electron transfer has constituted one of the most intensively studied subjects in contemporary chemistry. In this report, we show, for the first time, a new conceptual coordinative reduction of Cu2+ ion, which is realized in a paddlewheel MOF, HKUST-1, with a postsynthetic manner via inner sphere "single" electron transfer from hydroquinone (H2Q) to Cu2+ through its coordination bond. H2Q treatment of HKUST-1 under anhydrous conditions leads to the single charge (1+) reduction of approximately 30% of Cu2+ ions. Thus, this coordinative reduction is an excellent reduction process to be self-controlled in both oxidation state and quantity. As described below, once Cu2+ ions are reduced to Cu+, the reduction reaction does not proceed further, in terms of their oxidation state as well as their amount. Also, we demonstrate that a half of the Cu+ ions (about 15%) remains in paddlewheel framework with pseudo square planar geometry and the other half of the Cu+ ions (about 15%) forms [Cu(MeCN)4]+ complex in a small cage in the fashion of a ship-in-a-bottle after dissociation from the framework. Furthermore, we show that the coordinative reduction results in substantial enhancement of the hydrolytic stability of HKUST-1 to the extent that its structure remains intact even after exposure to humid air for two years.
RESUMO
New series of methoxy and hydroxyl group substituted triphenylamine (TPA)-imidazole fluorescent molecules (5-(diphenylamino)-2-(1H-phenanthro[9,10-d]imidazol-2-yl)phenol (1), 5-(diphenylamino)-2-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenol (2), 5-(diphenylamino)-2-(4,5-diphenyl-1H-imidazol-2-yl)phenol (3), 5-(diphenylamino)-2-(1,4,5-triphenyl-1H-imidazol-2-yl)phenol (4), N-(3-methoxy-4-(1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)-N-phenylbenzenamine (5), N-(3-methoxy-4-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)-N-phenylbenzene amine (6), and N-(3-methoxy-4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-N-phenylbenzenamine (7)) have been synthesized that exhibited strong solution fluorescence and molecular structure and conformation controlled fluorescence photoswitching, solid state fluorescence and halochromism. Hydroxyl substituted molecules (1-4) showed moderate to strong fluorescence in solution depend on solvent polarity and very weak solid state fluorescence. Methoxy substituted molecules (5-7) displayed strong fluorescence both in solution and solid state. Solid state structural studies revealed strong intramolecular H-bonding in the crystal lattice. Interestingly, highly twisted structure (6) showed rare light induced reversible fluorescence switching in CHCl3. The observation of isobestic point in time dependent fluorescence photoswitching studies indicated structural isomer conversion. Further, acid sensitive imidazole nitrogen has been made use to demonstrate solid state fluorescence switching via halochromism. Thus the present studies attempted to develop new fluorescent molecules and establish structure-property relationship for designing fluorescence switching materials. Graphical Abstract Molecular structure controlled solid state fluorescence, halochromism and a rare fluorescence photoswitching in chloroform have been observed with triphenylamine-imidazole derivatives.
RESUMO
A deâ novo synthetic strategy for the production of oligosaccharides containing 2,3,6-trideoxypyranoglycoside is reported. The key event is the Pd-catalyzed asymmetric diastereoselective hydroalkoxylation of ene-alkoxyallene-linked glycosidic fragments. The utility of this approach was demonstrated by the activation-free, stereodivergent, and convergent synthesis of various 2-deoxyoligosaccharides, as well as their aglycon conjugates.
RESUMO
An S-shaped gas isotherm pattern displays high working capacity in pressure-swing adsorption cycle, as established for CO2 , CH4 , acetylene, and CO. However, to our knowledge, this type of adsorption behavior has not been revealed for NH3 gas. Herein, we design and characterize a hydrogen-bonded organic framework (HOF) that can adsorb NH3 uniquely in an S-shape (typeâ IV) fashion. While conventional porous materials, mostly with typeâ I NH3 adsorption behavior, require relatively high regeneration temperature, this platform which has significant working capacity is easily regenerated and recyclable at room temperature.
RESUMO
We report a new approach to building hierarchical superstructures using a shape-persistent porous organic cage, which acts as a premade secondary building unit, and coordination chemistry. To illustrate the principle, a zinc-metalated porphyrin box (Zn-PB), a corner-truncated cubic porous cage, was connected by suitable dipyridyl terminated bridging ligands to construct PB-based hierarchical superstructures (PSSs). The PSSs were stabilized not only by the coordination bonds between Zn ions and bipyridyl-terminated ligands but also by π-π interactions between the corners of the Zn-PB units. By varying the length of the linker, we identified an optimum range of the linker length for construction of PSSs. The PSSs have large void volumes and an extrinsic surface area compared to the parent PBs, which can be exploited for the selective encapsulation and interior functionalization of the PSSs for various applications, including catalysis. We observed that singlet oxygen induced synthesis of the natural product, juglone, is more efficiently catalyzed by PSS-1 than its constituent component Zn-PB.
RESUMO
Molecular photoswitching, light induced reversible color/fluorescence modulation, has mostly been realized in organic molecules via E/Z isomerization of azobenzenes and stilbenes and ring opening/closing reactions of spiropyrans and diarylethenes. We report here new fluorescent molecular photoswitches based on triphenylamine (TPA)-imidazole derivatives, N-phenyl-N-(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)benzenamine (NTPB) and N-phenyl-N-(4-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)benzenamine (NPPB), that exhibited light induced reversible fluorescence switching via conformational change from a twisted molecular structure to more planar. NTPB and NPPB in CHCl3 showed red shift of absorption and fluorescence upon UV light irradiation whereas white light exposure reversed both absorption as well as fluorescence. The role of the TPA-imidazole twisted molecular structure in photoswitching was established based on structure property, computational and photophysical studies. The isobestic point observed in time dependent fluorescence change under UV light irradiation clearly demonstrated the presence of two different conformational isomers. Interestingly, polymorphism and torsion angle (τ) dependent fluorescence of NTPB and NPPB in the solid state also supported the role of the twisted molecular structure of TPA-imidazole in fluorescence switching/tuning. Interestingly, NTPB showed fluorescence photoswitching in the solid state also whereas rigid phenanthrene based NPPB did not show fluorescence photoswitching. Thus the present studies provide structural insight for designing a new type of fluorescent organic molecular photoswitches based on conformational modulation that could be of potential interest in optoelectronic devices.
RESUMO
Crystallographic observation of adsorbed gas molecules is a highly difficult task due to their rapid motion. Here, we report the in situ single-crystal and synchrotron powder X-ray observations of reversible CO2 sorption processes in an apparently nonporous organic crystal under varying pressures at high temperatures. The host material is formed by hydrogen bond network between 1,3,5-tris-(4-carboxyphenyl)benzene (H3BTB) and N,N-dimethylformamide (DMF) and by π-π stacking between the H3BTB moieties. The material can be viewed as a well-ordered array of cages, which are tight packed with each other so that the cages are inaccessible from outside. Thus, the host is practically nonporous. Despite the absence of permanent pathways connecting the empty cages, they are permeable to CO2 at high temperatures due to thermally activated molecular gating, and the weakly confined CO2 molecules in the cages allow direct detection by in situ single-crystal X-ray diffraction at 323 K. Variable-temperature in situ synchrotron powder X-ray diffraction studies also show that the CO2 sorption is reversible and driven by temperature increase. Solid-state magic angle spinning NMR defines the interactions of CO2 with the organic framework and dynamic motion of CO2 in cages. The reversible sorption is attributed to the dynamic motion of the DMF molecules combined with the axial motions/angular fluctuations of CO2 (a series of transient opening/closing of compartments enabling CO2 molecule passage), as revealed from NMR and simulations. This temperature-driven transient molecular gating can store gaseous molecules in ordered arrays toward unique collective properties and release them for ready use.
RESUMO
With regard to fluorescence quenching commonly observed during metal-ion detection, "turn-on" chemical sensing has been rarely reported, but could be extremely important because it facilitates the selective recognition of target objects of interest against a dark background. A metal-organic framework (MOF) chemosensor has been prepared that serves as an efficient platform for the selective detection of Cu2+ and Cd2+ ions over other metal ions. In particular, this framework shows the highest fluorescence enhancement (≈60-fold relative to Cd-free MOF) for the hazardous metal ion Cd2+ among luminescent MOFs and displays excellent reusability in repeated cycles. The direct diffusion of Cd2+ into the crystal pores has also been visualized for the first time.
RESUMO
Three MOF-74-type Co(II) frameworks with one-dimensional hexagonal channels have been prepared. Co(II) spins in a chain are ferromagnetically coupled through carboxylate and phenoxide bridges. Interchain antiferromagnetic couplings via aromatic ring pathways operate over a Co-Co length shorter than â¼10.9 Å, resulting in a field-induced metamagnetic transition, while being absent over lengths longer than â¼14.7 Å.