Electrochemically Active MoO3/TiN Sulfur Host Inducing Dynamically Reinforced Built-in Electric Field for Advanced Lithium-Sulfur Batteries.

Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520 mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564 mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6 mA h cm-2) under a high sulfur loading of 8.3 mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.

Nontypical Wulff-Shape Silicon Nanosheets with High Catalytic Activity.

Nanostructured silicon with an equilibrium shape has exhibited hydrogen evolution reaction activity mainly owing to its high surface area, which is distinct from that of bulk silicon. Such a Wulff shape of silicon favors low-surface-energy planes, resulting in silicon being an anisotropic and predictably faceted solid in which certain planes are favored, but this limits further improvement of the catalytic activity. Here, we introduce nanoporous silicon nanosheets that possess high-surface-energy crystal planes, leading to an unconventional Wulff shape that bolsters the catalytic activity. The high-index plane, uncommonly seen in the Wulff shape of bulk Si, has a band structure optimally aligned with the redox potential necessary for hydrogen generation, resulting in an apparent quantum yield (AQY) of 12.1% at a 400 nm wavelength. The enhanced light absorption in nanoporous silicon nanosheets also contributes to the high photocatalytic activity. Collectively, the strategy of making crystals with nontypical Wulff shapes can provide a route toward various classes of photocatalysts for hydrogen production.

Hybrid Perovskite-Based Wireless Integrated Device Exceeding a Solar to Hydrogen Conversion Efficiency of 11.

A wireless solar water splitting device provides a means to achieve an inexpensive and highly distributed solar-to-fuel system owing to its portability, flexible scale, and simple design. Here, a highly efficient hydrogen-generating artificial leaf is introduced, which is a wireless configuration for converting solar energy into chemical energy, by integrating a hybrid perovskite (PSK) as the light absorber with catalysts for electrochemical reaction. First, a single integrated photoelectrochemical photocathode, and a spatially decoupled hydrogen evolution reaction catalyst, are fabricated. A decoupled geometry is adopted to enable the physical protection of the PSK layer from the electrolyte, thus allowing excellent stability for over 85 h. Additionally, an efficient dual photovoltaic module photocathode is fabricated to produce sufficient photovoltage to drive water splitting reactions, as well as a high photocurrent to achieve the applied-bias photoconversion efficiency (13.5%). To investigate the overall water splitting performance, a NiFe-OH catalyst is employed, and the device with a wired configuration achieves a photocurrent density of 9.35 mA cm-2 , corresponding to a solar to hydrogen (STH) efficiency of 11.5%. The device with a fully integrated wireless artificial leaf configuration exhibited a similar STH efficiency of over 11%, demonstrating the effectiveness of this cell design.

Chirality-Induced Spin Selectivity of Chiral 2D Perovskite Enabling Efficient Spin-Dependent Oxygen Evolution Reaction.

The sluggish and complex multi-step oxygen evolution reaction remains an obstacle to bias-free photoelectrochemical water-splitting systems. Several theoretical studies have suggested that spin-aligned intermediate radicals can significantly enhance the kinetic rates for oxygen generation. Herein, it is reported that the chirality-induced spin selectivity phenomena can become an impressive approach by adopting chiral 2D organic-inorganic hybrid perovskites as a spin-filtering layer on the photoanode. This chiral 2D perovskite-based water-splitting device achieves enhanced oxygen evolution performance with a reduced overpotential of 0.14 V, high fill factor, and 230% increased photocurrent compared to a device without a spin-filtering layer. Moreover, combined with a superhydrophobic patterning strategy, this device realizes excellent operational stability by sustaining ≈90% of the initial photocurrent, even after 10 h.

Ultrathin Crystalline Silicon Nano and Micro Membranes with High Areal Density for Low-Cost Flexible Electronics.

Ultrathin crystalline silicon is widely used as an active material for high-performance, flexible, and stretchable electronics, from simple passive and active components to complex integrated circuits, due to its excellent electrical and mechanical properties. However, in contrast to conventional silicon wafer-based devices, ultrathin crystalline silicon-based electronics require an expensive and rather complicated fabrication process. Although silicon-on-insulator (SOI) wafers are commonly used to obtain a single layer of crystalline silicon, they are costly and difficult to process. Therefore, as an alternative to SOI wafers-based thin layers, here, a simple transfer method is proposed for printing ultrathin multiple crystalline silicon sheets with thicknesses between 300 nm to 13 µm and high areal density (>90%) from a single mother wafer. Theoretically, the silicon nano/micro membrane can be generated until the mother wafer is completely consumed. In addition, the electronic applications of silicon membranes are successfully demonstrated through the fabrication of a flexible solar cell and flexible NMOS transistor arrays.

Tailoring the Time-Averaged Structure for Polarization-Sensitive Chiral Perovskites.

Chiral perovskites have emerged as promising candidates for polarization-sensing materials. Despite their excellent chiroptical properties, the nature of their multiple-quantum-well structures is a critical hurdle for polarization-based and spintronic applications. Furthermore, as the origin of chiroptical activity in chiral perovskites is still illusive, the strategy for simultaneously enhancing the chiroptical activity and charge transport has not yet been reported. Here, we demonstrated that incorporating a Lewis base into the lattice can effectively tune the chiroptical response and electrical properties of chiral perovskites. Through solid-state nuclear magnetic resonance spectroscopic measurements and theoretical calculations, it was demonstrated that the material property manipulation resulted from the change in the time-averaged structure induced by the Lewis base. Finally, as a preliminary proof of concept, a vertical-type circularly polarized light photodetector based on chiral perovskites was developed, exhibiting an outstanding performance with a distinguishability of 0.27 and a responsivity of 0.43 A W-1.

Universal Bifacial Stamping Approach Enabling Reverse-Graded Ruddlesden-Popper 2D Perovskite Solar Cells.

Quasi 2D perovskite solar cells (PSCs) are promising light absorbers that overcome the inherent instabilities of 3D perovskites. High-performance and stable 2D PSCs require careful control over the crystallographic orientation and phase distribution. This study introduces a simple and universal bifacial stamping method to obtain highly oriented perovskite crystals with a reverse-graded structure, where the low-n-value 2D perovskite phases are located mainly at the film surfaces. Bifacial stamping of 3D perovskite films atop the 2D films enables incorporation of 2D spacer cations into the 3D film surfaces, forming reverse-graded quasi-2D perovskite films. During stamping, suppressed evaporation of the precursor solvent induces heterogeneous nucleation from the contact interface between the 2D and 3D films, resulting in well-crystallized perovskite films having out-of-plane alignments with respect to the substrate. Thus, a highly oriented and reverse-graded quasi-2D perovskite with an average n value of 18 is obtained with power conversion efficiency exceeding 17% and high open-circuit voltage of 1.11 V for iso-butylammonium (iso-BA)-based (iso-BA2 MAn -1 Pbn I3 n +1 ) PSCs. The unencapsulated device retains 92% of its initial efficiency after aging at 40 ± 5% relative humidity for 1200 h. This work provides a new strategy for fabricating highly oriented and phase-controlled quasi-2D PSCs.

Chiral 2D Organic Inorganic Hybrid Perovskite with Circular Dichroism Tunable Over Wide Wavelength Range.

The effect of chemical-composition modification on the chiroptical property of chiral organic ammonium cation-containing organic inorganic hybrid perovskite (chiral OIHP) is investigated. Varying the mixing ratio of bromide and iodide anions in S- or R-C6H5CH2(CH3)NH3)2PbI4(1-x)Br4x modifies the band gap of chiral OIHP, leading to a shift of the circular dichroism (CD) signal from 495 to 474 nm. However, it is also found that an abrupt crystalline structure transition occurs, and the CD signal is turned off when iodide-determinant phases are transformed into the bromide-determinant phase. To obtain CD in the wavelength range where the bromide-determinant phase is supposed to exhibit chiroptical activity, that is, <474 nm, S- or R-C12H7CH2(CH3)NH3 with a larger spacer group can be adopted; thus, the CD signal can be further blue-shifted to ∼375 nm. Here, we show that chemical-composition modification of chiral OIHP affects the chiroptical properties of chiral OIHP in two ways: (1) tuning the wavelength of CD by modulating the excitonic band structure and (2) switching the CD on and off by inducing a crystalline-structure change. These properties can be utilized for structural engineering of high-performance chiroptical materials for spin-polarized light-emitting devices and polarization-based optoelectronics.

Strategies for enhancing the photocurrent, photovoltage, and stability of photoelectrodes for photoelectrochemical water splitting.

To accelerate the deployment of hydrogen produced by renewable solar energy, several technologies have been competitively developed, including photoelectrochemical (PEC), photocatalytic, and photovoltaic-electrolysis routes. In this review, we place PEC in context with these competing technologies and highlight key advantages of PEC systems. After defining the unique performance metrics of the PEC water splitting system, recently developed strategies for enhancing each performance metric, such as the photocurrent density, photovoltage, fill factor, and stability are surveyed in conjunction with the relevant theoretical aspects. In addition, various advanced characterization methods are discussed, including recently developed in situ techniques, allowing us to understand not only the basic properties of materials but also diverse photophysical phenomena underlying the PEC system. Based on the insights gained from these advanced characterization techniques, we not only provide a resource for researchers in the field as well as those who want to join the field, but also offer an outlook of how thin film-based PEC studies could lead to commercially viable water splitting systems.

Strain-Mediated Phase Stabilization: A New Strategy for Ultrastable α-CsPbI3 Perovskite by Nanoconfined Growth.

All-inorganic cesium lead triiodide (CsPbI3 ) perovskite is considered a promising solution-processable semiconductor for highly stable optoelectronic and photovoltaic applications. However, despite its excellent optoelectronic properties, the phase instability of CsPbI3 poses a critical hurdle for practical application. In this study, a novel stain-mediated phase stabilization strategy is demonstrated to significantly enhance the phase stability of cubic α-phase CsPbI3 . Careful control of the degree of spatial confinement induced by anodized aluminum oxide (AAO) templates with varying pore sizes leads to effective manipulation of the phase stability of α-CsPbI3 . The Williamson-Hall method in conjunction with density functional theory calculations clearly confirms that the strain imposed on the perovskite lattice when confined in vertically aligned nanopores can alter the formation energy of the system, stabilizing α-CsPbI3 at room temperature. Finally, the CsPbI3 grown inside nanoporous AAO templates exhibits exceptional phase stability over three months under ambient conditions, in which the resulting light-emitting diode reveals a natural red color emission with very narrow bandwidth (full width at half maximum of 33 nm) at 702 nm. The universally applicable template-based stabilization strategy can give in-depth insights on the strain-mediated phase transition mechanism in all-inorganic perovskites.

Defect-Free, Highly Uniform Washable Transparent Electrodes Induced by Selective Light Irradiation.

A simple route to fabricate defect-free Ag-nanoparticle-carbon-nanotube composite-based high-resolution mesh flexible transparent conducting electrodes (FTCEs) is explored. In the selective photonic sintering-based patterning process, a highly soft rubber or thin plastic substrate is utilized to achieve close and uniform contact between the composite layer and photomask, with which uniform light irradiation can be obtained with diminished light diffraction. This well-controlled process results in developing a fine and uniform mesh pattern (≈12 µm). The mesh patternability is confirmed to be dependent on heat distribution in the selectively light-irradiated film and the pattern design for FTCE could be adopted for more precise patterns with desired performance. Moreover, using a very thin substrate could allow the mesh to be positioned closer to the strain-free neutral mechanical plane. Due to strong interfacial adhesion between the mesh pattern and substrate, the mesh FTCE could tolerate severe mechanical deformation without performance degradation. It is demonstrated that a transparent heater with fine mesh patterns on thin substrate can maintain stability after 100 repeated washing test cycles in which a variety of stress situations occurring in combination. The presented highly durable FTCE and simple fabrication processes may be widely adoptable for various flexible, large-area, and wearable optoelectronic devices.

Insertion of Vertically Aligned Nanowires into Living Cells by Inkjet Printing of Cells.

Effective insertion of vertically aligned nanowires (NWs) into cells is critical for bioelectrical and biochemical devices, biological delivery systems, and photosynthetic bioenergy harvesting. However, accurate insertion of NWs into living cells using scalable processes has not yet been achieved. Here, NWs are inserted into living Chlamydomonas reinhardtii cells (Chlamy cells) via inkjet printing of the Chlamy cells, representing a low-cost and large-scale method for inserting NWs into living cells. Jetting conditions and printable bioink composed of living Chlamy cells are optimized to achieve stable jetting and precise ink deposition of bioink for indentation of NWs into Chlamy cells. Fluorescence confocal microscopy is used to verify the viability of Chlamy cells after inkjet printing. Simple mechanical considerations of the cell membrane and droplet kinetics are developed to control the jetting force to allow penetration of the NWs into cells. The results suggest that inkjet printing is an effective, controllable tool for stable insertion of NWs into cells with economic and scale-related advantages.

Cu(II)-alkyl amine complex mediated hydrothermal synthesis of Cu nanowires: exploring the dual role of alkyl amines.

Ligands/surfactants play an important role in the synthesis of anisotropic nanomaterials. Other than site specific binding to the crystal plane, they can also undergo complexation with metal ions, altering the nature of the metal complex. The ligand-metal complex formation could be sufficient to modify the reaction kinetics and could affect the size and morphology of the nanostructures. In this article, we investigated such a change in the metal precursor caused by ligands (i.e., alkyl amines) in the hydrothermal synthesis of Cu nanowires in the presence of glucose as a reducing agent. Comparative studies were carried out with other nitrogen-based surfactants such as cetyl trimethyl ammonium bromide and polyvinyl pyrrolodine. Our experimental results confirmed the complex formation of Cu(2+) ions with alkyl amines and its application for nanowire synthesis. Slow reduction of this complex allows for the generation of twinned seeds, which are later grown into nanowires by consuming newly generated seeds in the presence of excess alkyl amine.

Chirality-Induced Spin Selectivity Enables New Breakthrough in Electrochemical and Photoelectrochemical Reactions.

To facilitate the transition from a carbon-energy-dependent society to a sustainable society, conventional engineering strategies, which encounter limitations associated with intrinsic material properties, should undergo the paradigm shift. From a theoretical viewpoint, the spin-dependent feature of oxygen evolution reaction (OER) reveals the potential of a spin-polarization strategy in enhancing the performance of electrochemical (EC) reactions. The chirality-induced spin selectivity (CISS) phenomenon attracts unprecedented attention owing to its potential utility in achieving novel breakthroughs. This paper starts with the experimental results aimed at enhancing the efficiency of the spin-dependent OER focusing on the EC system based on the CISS phenomenon. The applicability of spin-polarization to EC system is verified through various analytical methodologies to clarify the theoretical groundwork and mechanisms underlying the spin-dependent reaction pathway. The discussion is then extended to effective spin-control strategies in photoelectrochemical system based on the CISS effect. Exploring the influence of spin-state control on the kinetic and thermodynamic aspects, this perspective also discusses the effect of spin polarization induced by the CISS phenomenon on spin-dependent OER. Lastly, future directions for enhancing the performance of spin-dependent redox systems are discussed, including expansion to various chemical reactions and the development of materials with spin-control capabilities.

Core-Shell Perovskite Quantum Dots for Highly Selective Room-Temperature Spin Light-Emitting Diodes.

Circularly polarized light (CPL) is a crucial light source with a wide variety of potential applications such as magnetic recording, and 3D display. Here, core-shell heterostructured perovskite quantum dots (QDs) for room-temperature spin-polarized light-emitting diodes (spin-LEDs) are developed. Specifically, a 2D chiral perovskite shell is deposited onto the achiral 3D inorganic perovskite (CsPbBr3 ) core. Owing to the chiral-induced spin selectivity effect, the spin state of the injected charge carriers is biased when they are transmitted through the 2D chiral shell. The spin-controlled carriers then radiatively recombine inside the CsPbBr3 emissive core, resulting in CPL emission. It is demonstrated that the (R)- and (S)-1-(2-(naphthyl)ethylamine) (R-/S-NEA) 2D chiral cations enhance the spin polarization degree due to their strong chiroptical properties. Systematical defect analyses confirm that 2D chiral cations (i.e., R-/S-NEA) successfully passivate halide vacancies at the surface of the CsPbBr3 QDs, thereby attaining a high photoluminescence quantum yield of 78%. Moreover, the spin-LEDs prepared with core-shell QDs achieve a maximum external quantum efficiency of 5.47% and circularly polarized electroluminescence with a polarization degree (PCP-EL ) of 12% at room temperature. Finally, various patterns fabricated by inkjet printing the core-shell QDs emit strong CPL, highlighting their potential as an emitter for next-generation displays.

Fluorinated Organic Cations Derived Chiral 2D Perovskite Enabling Enhanced Spin-Dependent Oxygen Evolution Reaction.

Chirality-induced spin selectivity observed in chiral 2D organic-inorganic hybrid perovskite holds promise to achieve spin-dependent electrochemistry. However, conventional chiral 2D perovskites suffer from low conductivity and hygroscopicity, limiting electrochemical performance and operational stability. Here, a cutting-edge material design is introduced to develop a stable and efficient chiral perovskite-based spin polarizer by employing fluorinated chiral cation. The fluorination approach effectively promotes the charge carrier transport along the out-of-plane direction by mitigating the dielectric confinement effect within the multi-quantum well-structured 2D perovskite. Integrating the fluorinated cation incorporated spin polarizer with BiVO4 photoanode considerably boosts the photocurrent density while reducing overpotential through a spin-dependent oxygen evolution reaction. Furthermore, the hydrophobic nature of fluorine in spin polarizer endows operational stability to the photoanode, extending the durability by 280% as compared to the device with non-fluorinated spin polarizer.

A dual spin-controlled chiral two-/three-dimensional perovskite artificial leaf for efficient overall photoelectrochemical water splitting.

The oxygen evolution reaction, which involves high overpotential and slow charge-transport kinetics, plays a critical role in determining the efficiency of solar-driven water splitting. The chiral-induced spin selectivity phenomenon has been utilized to reduce by-product production and hinder charge recombination. To fully exploit the spin polarization effect, we herein propose a dual spin-controlled perovskite photoelectrode. The three-dimensional (3D) perovskite serves as a light absorber while the two-dimensional (2D) chiral perovskite functions as a spin polarizer to align the spin states of charge carriers. Compared to other investigated chiral organic cations, R-/S-naphthyl ethylamine enable strong spin-orbital coupling due to strengthened π-π stacking interactions. The resulting naphthyl ethylamine-based chiral 2D/3D perovskite photoelectrodes achieved a high spin polarizability of 75%. Moreover, spin relaxation was prevented by employing a chiral spin-selective L-NiFeOOH catalyst, which enables the secondary spin alignment to promote the generation of triplet oxygen. This dual spin-controlled 2D/3D perovskite photoanode achieves a 13.17% of applied-bias photon-to-current efficiency. Here, after connecting the perovskite photocathode with L-NiFeOOH/S-naphthyl ethylamine 2D/3D photoanode in series, the resulting co-planar water-splitting device exhibited a solar-to-hydrogen efficiency of 12.55%.

Stable water splitting using photoelectrodes with a cryogelated overlayer.

Hydrogen production techniques based on solar-water splitting have emerged as carbon-free energy systems. Many researchers have developed highly efficient thin-film photoelectrochemical (PEC) devices made of low-cost and earth-abundant materials. However, solar water splitting systems suffer from short lifetimes due to catalyst instability that is attributed to both chemical dissolution and mechanical stress produced by hydrogen bubbles. A recent study found that the nanoporous hydrogel could prevent the structural degradation of the PEC devices. In this study, we investigate the protection mechanism of the hydrogel-based overlayer by engineering its porous structure using the cryogelation technique. Tests for cryogel overlayers with varied pore structures, such as disconnected micropores, interconnected micropores, and surface macropores, reveal that the hydrogen gas trapped in the cryogel protector reduce shear stress at the catalyst surface by providing bubble nucleation sites. The cryogelated overlayer effectively preserves the uniformly distributed platinum catalyst particles on the device surface for over 200 h. Our finding can help establish semi-permanent photoelectrochemical devices to realize a carbon-free society.

Bi2 S3 -Cu3 BiS3 Mixed Phase Interlayer for High-Performance Cu3 BiS3 -Photocathode for 2.33% Unassisted Solar Water Splitting Efficiency.

To realize practical solar hydrogen production, a low-cost photocathode with high photocurrent density and onset potential should be developed. Herein, an efficient and stable overall photoelectrochemical tandem cell is developed with a Cu3 BiS3 -based photocathode. By exploiting the crystallographic similarities between Bi2 S3 and Cu3 BiS3 , a one-step solution process with two sulfur sources is used to prepare the Bi2 S3 -Cu3 BiS3 blended interlayer. The elongated Bi2 S3 -Cu3 BiS3 mixed-phase 1D nanorods atop a planar Cu3 BiS3 film enable a high photocurrent density of 7.8 mA cm-2 at 0 V versus the reversible hydrogen electrode, with an onset potential of 0.9 VRHE . The increased performance over the single-phase Cu3 BiS3 thin-film photocathode is attributed to the enhanced light scattering and charge collection through the unique 1D nanostructure, improved electrical conductivity, and better band alignment with the n-type CdS layer. A solar-to-hydrogen efficiency of 2.33% is achieved under unassisted conditions with a state-of-the-art Mo:BiVO4 photoanode, with excellent stability exceeding 21 h.

Atomically dispersed iridium catalysts on silicon photoanode for efficient photoelectrochemical water splitting.

Stabilizing atomically dispersed single atoms (SAs) on silicon photoanodes for photoelectrochemical-oxygen evolution reaction is still challenging due to the scarcity of anchoring sites. Here, we elaborately demonstrate the decoration of iridium SAs on silicon photoanodes and assess the role of SAs on the separation and transfer of photogenerated charge carriers. NiO/Ni thin film, an active and highly stable catalyst, is capable of embedding the iridium SAs in its lattices by locally modifying the electronic structure. The isolated iridium SAs enable the effective photogenerated charge transport by suppressing the charge recombination and lower the thermodynamic energy barrier in the potential-determining step. The Ir SAs/NiO/Ni/ZrO2/n-Si photoanode exhibits a benchmarking photoelectrochemical performance with a high photocurrent density of 27.7 mA cm-2 at 1.23 V vs. reversible hydrogen electrode and 130 h stability. This study proposes the rational design of SAs on silicon photoelectrodes and reveals the potential of the iridium SAs to boost photogenerated charge carrier kinetics.