Highly Conductive Ti3 C2 Tx MXene Hybrid Fibers for Flexible and Elastic Fiber-Shaped Supercapacitors.

Fiber-shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one-step wet-spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti3 C2 Tx MXene nanosheets and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm-1 , which is about five times higher than other reported Ti3 C2 Tx MXene-based fibers (up to ≈290 S cm-1 ). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm-3 at 5 mV s-1 ) and an excellent rate performance (≈375.2 F cm-3 at 1000 mV s-1 ). When assembled into a free-standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm-3 and ≈8249 mW cm-3 , respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene-based fiber electrodes and their scalable production for fiber-based energy storage applications.

Data on kilometer scale production of stretchable conductive multifilaments enables knitting wearable strain sensing textiles.

This data article contains analyzed data for the article "Continuous Production of Stretchable Conductive Multifilaments in Kilometer Scale Enables Facile Knitting of Wearable Strain Sensing Textiles" (Seyedin et al., 2018) [1]. Details of wet-spinning conditions to achieve scaled-up production of stretchable and conducting polyurethane/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PU/PEDOT:PSS) multifilaments are provided. The stress-strain curves for tensile and stretch-relaxation tests on the multifilament and different knitted textile structures (plain-knit, co-knit, co-knit-alternate, co-knit with conductive stitch, and plain with non-conductive stitch) are presented. It is shown that the PU/PEDOT:PSS multifilaments can also be knitted into fabrics that when worn on various body parts, such as knee, elbow, and finger, can monitor their various movements.