Ecological relationship between floral thermogenesis and pollination in Nelumbo lutea (Nelumbonaceae).

PREMISE OF STUDY: Floral thermogenesis is an unusual floral trait with a well-documented physiological process, and yet, there is limited understanding of how this trait influences plant reproduction. The current study was undertaken to gain a better understanding of how floral thermogenesis in Nelumbo lutea impacts pollinator attraction and consequent plant reproduction. METHODS: We conducted field studies on floral thermogenesis and thermoregulation, flower sexual development, floral visitation patterns, breeding system, pollen transfer dynamics, and floral scent production. KEY RESULTS: The most abundant visitors to the thermoregulatory flowers included the Phoridae (Diptera), Chrysomelidae (Coleoptera), and Hymenoptera. Chrysomelid beetles, particularly Diabrotica, were frequent visitors to both first-day female- and second-day bisexual-phase flowers, while phorid flies were most common in bisexual-phase flowers. Pollen transfer experiments indicated that Diabrotica was equally effective in depositing pollen on stigmas, as were the less frequent, but pollen-loaded halictid bees. CONCLUSIONS: Flowers received a taxonomically wide assemblage of floral visitors and appear adapted to attract beetles, primarily Chrysomelidae and medium-sized bees. This study is the first to provide strong support that beetles can comprise the dominant portion of floral visitors and are as effective in pollen transfer as bees. Thermogenesis aids in dispersing the main floral scent component-1,4-dimethoxybenzene-attracting both chrysomelids and bees, while thermoregulation causes chrysomelid beetles to actively seek out new flowers for evening residence. This search behavior likely results in chrysomelids affecting cross-pollination.

Efficient Route for the Preparation of Composite Resin Incorporating Silver Nanoparticles with Enhanced Antibacterial Properties.

An efficient and facile route for the immobilization of silver (Ag) nanoparticles (NPs) in anion exchange resin beads with different silver loading is proposed. In this method, BH4- ions were first introduced into chloride-form resin through an ion exchange process with Cl- ions, followed by in-situ chemical reduction of Ag+ ions at the surface of the resin to form metallic Ag nanoparticles. Morphology and structure of the resulting Ag-resin nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), Fourier transform infra-red (FTIR), inductively coupled plasma-optical emission spectrometry (ICP-OES), and thermogravimetry analysis (TGA). The results confirmed the presence of smaller diameter Ag NPs incorporated into the resin beads having an average diameter on the order of 10 nm with a few Ag NP clusters of 20-100 nm. The nanoparticles were homogeneously distributed throughout the resin. There were no dramatic increases in average particle sizes even at very high Ag loadings. The resin retained its structure and stability, allowing higher stability of immobilized AgNPs than the colloidal ones. The Ag-loaded resins made with 50 mM AgNO3 were tested for antibacterial activity in vitro against Escherichia coli (E. coli) as a model microbial contaminant in water. Results showed greater than 99% bacterial inhibition within 3 h of exposure. The resin form offers greater ease of handling, long-term storage at room temperature, reusability in repeated reactions, and reduces the risk of environmental contamination.

Gas chromatography-mass spectrometry screening methods for select UV filters, synthetic musks, alkylphenols, an antimicrobial agent, and an insect repellent in fish.

Two screening methods have been developed for simultaneous determination of ten extensively used personal care products (PCPs) and two alkylphenol surfactants in fish. The methods consisted of extraction, clean-up, derivatization and analysis by gas chromatography-mass spectrometry with selected ion monitoring (GC-SIM-MS) or gas chromatography-tandem mass spectrometry (GC-MS/MS) techniques. Among solvents tested to assess recovery of target compounds from 1-g tissue homogenates, acetone was selected as optimal for extracting compounds with dissimilar physicochemical properties from fish tissue. Initial experiments confirmed that GC-SIM-MS could be applied for analysis of lean fillet tissue (<1% lipid) without gel-permeation chromatography (GPC), and this approach was applied to assess the presence of target analytes in fish fillets collected from a regional effluent-dominated stream in Texas, USA. Benzophenone, galaxolide, tonalide, and triclosan were detected in 11 of 11 environmental samples at concentrations ranging from; 37 to 90, 234 to 970, 26 to 97, and 17 to 31 ng/g, respectively. However, performance of this analytical approach declined appreciably with increasing lipid content of analyzed tissues. Successful analysis of samples with increased lipid content was enabled by adding GPC to the sample preparation protocol and monitoring analytes with tandem mass spectrometry. Both analytical approaches were validated using fortified fillet tissue collected from locations expected to be minimally impacted by anthropogenic influences. Average analyte recoveries ranged from 87% to 114% with RSDs <11% and from 54% to 107% with RSDs <20% for fish tissue containing <1% and 4.9% lipid, respectively. Statistically derived method detection limits (MDLs) for GC-SIM-MS and GC-MS/MS methodologies ranged from 2.4 to 16 ng/g, and 5.1 to 397 ng/g, respectively.

Occurrence of pharmaceuticals and personal care products in fish: results of a national pilot study in the United States.

Pharmaceuticals and personal care products are being increasingly reported in a variety of biological matrices, including fish tissue; however, screening studies have presently not encompassed broad geographical areas. A national pilot study was initiated in the United States to assess the accumulation of pharmaceuticals and personal care products in fish sampled from five effluent-dominated rivers that receive direct discharge from wastewater treatment facilities in Chicago, Illinois; Dallas, Texas; Orlando, Florida; Phoenix, Arizona; and West Chester, Pennsylvania, USA. Fish were also collected from the Gila River, New Mexico, USA, as a reference condition expected to be minimally impacted by anthropogenic influence. High performance liquid chromatography-tandem mass spectrometry analysis of pharmaceuticals revealed the presence of norfluoxetine, sertraline, diphenhydramine, diltiazem, and carbamazepine at nanogram-per-gram concentrations in fillet composites from effluent-dominated sampling locations; the additional presence of fluoxetine and gemfibrozil was confirmed in liver tissue. Sertraline was detected at concentrations as high as 19 and 545 ng/g in fillet and liver tissue, respectively. Gas chromatography-tandem mass spectrometry analysis of personal care products in fillet composites revealed the presence of galaxolide and tonalide at maximum concentrations of 2,100 and 290 ng/g, respectively, and trace levels of triclosan. In general, more pharmaceuticals were detected at higher concentrations and with greater frequency in liver than in fillet tissues. Higher lipid content in liver tissue could not account for this discrepancy as no significant positive correlations were found between accumulated pharmaceutical concentrations and lipid content for either tissue type from any sampling site. In contrast, accumulation of the personal care products galaxolide and tonalide was significantly related to lipid content. Results suggest that the detection of pharmaceuticals and personal care products was dependent on the degree of wastewater treatment employed.

Enantiospecific toxicity of the beta-blocker propranolol to Daphnia magna and Pimephales promelas.

Propranolol is a widely prescribed, nonselective beta-adrenergic receptor-blocking agent. Propranolol has been detected in municipal effluents from the ng/L to the low-microg/L range. Like many therapeutics and other aquatic contaminants, propranolol is distributed as a racemic mixture ((R,S)-propranolol hydrochloride). Although the (S)-enantiomer is the most active form in mammals (up to 100-fold difference), no information is available regarding the enantiospecific toxicity of propranolol to aquatic organisms. Acute and chronic studies were conducted with Daphnia magna and Pimephales promelas to determine enantiospecific toxicity of propranolol to a model aquatic invertebrate and vertebrate, respectively. Also, enantiospecific effects of propranolol on D. magna heart rate were examined. Propranolol treatment levels were verified using high-performance liquid chromatography/mass spectrometry. Acute (48-h) responses of both organisms were similar for all enantiomer treatments. Chronic P. promelas responses to propranolol enantiomers followed the hypothesized relationship of (S)-propranolol being more toxic than (R)-propranolol, but chronic D. magna responses did not. This is potentially the result of a lack of beta-type receptors in cladocerans. No enantiospecific effects on daphnid heart rate were observed in acute exposures. Interestingly, some propranolol enantiomer treatments produced significant increases in reproduction before causing reproduction to decrease at higher treatment levels. To our knowledge, this research represents the first study of enantiospecific toxicity of chiral pharmaceutical pollutants.

Determination of hemoglobin adduct of a musk xylene metabolite in trout as biomarker of exposure by gas chromatography mass spectrometry.

Musk xylene(MX) is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino-MX(4-AMX) as cysteine adducts in trout hemoglobin(Hb) was made by gas chromatography-ion trap-mass spectrometry(GC/MS). The Hb samples were collected from trout after 24 h exposure to MX at 10 microg/g, and or menhaden oil(control). The formation of cysteine-Hb adduct was observed from nitroso derivative of MX, released by alkaline hydrolysis. The released 4-AMX metabolite was extracted in n-hexane. The extract was then reduced by evaporation, and analyzed by GC/MS. When similar agreement of mass spectral features and retention time of 4-AMX were obtained in both standard and sample solutions, the presence of 4-AMX metabolite in the Hb was confirmed. The concentration of 4-AMX was found to be 3.1 x 10(-6)--6.9 x 10(-6) mg/g in the Hb solution. Quantitation was made based on an internal standard, a calibration plot, and response factor. In the non-hydrolyzed and laboratory blank extracts, the 4-AMX metabolite was not detected. Additionally, coeluting and interfering ions were observed in the biological samples.

Enhanced desolvation and improved deposition efficiency by modified thermospray for the coupling of HPLC and FT-IR.

A thermospray interface was modified for the on-line coupling of normal- and reversed-phase high-performance liquid chromatography (HPLC) and Fourier transform infrared (FTIR) spectrometry. An LC/FTIR assembly was used to evaporate the column effluents and the solutes were deposited as a series of individual spots on a stainless-steel moving belt, which continuously transferred the solutes into a diffuse reflectance accessory of FTIR, enabling the identification of deposited solutes by measuring the IR spectrum. A lowered desolvation temperature of reversed-phase HPLC eluents, a higher deposition efficiency, such as 69%, and a reduction of the thermospray capillary voltage were achieved by using a heated gas flow and a heating plate. The thermospray temperature and the distance between the tip of the thermospray tubing and the surface of the belt were shown to influence the area of deposition of spots. A variation of +/- 1 degrees C could be used for a sensitive and reproducible deposition of Irganox 565 with a relative standard deviation (RSD) of 1.8 to 2.5%. The UV and FTIR chromatograms gave similar features for the HPLC-separated constituents. The interface-derived IR spectra of the constituents showed excellent agreement of the spectral features with those of the standard FTIR spectra, and no thermal degradation was found to occur.

Determination of benzene, toluene, ethylbenzene and xylene in river water by solid-phase extraction and gas chromatography.

A rapid and reproducible method is described that employs solid-phase extraction (SPE) using dichloromethane, followed by gas chromatography (GC) with flame ionization detection for the determination of benzene, toluene, ethylbenzene, xylene and cumene (BTEXC) from Buriganga River water of Bangladesh. The method was applied to detect BTEXC in a sample collected from the surface, or 5 cm depth of water. Two-hundred milliliters of n-hexane-pretreated and filtered water samples were applied directly to a C18 SPE column. BTEXC were extracted with dichloromethane and the BTEX concentrations were obtained to be 0.1 to 0.37 microg ml(-1). The highest concentration of benzene was found as 0.37 microg ml(-1) with a relative standard deviation (RSD) of 6.2%; cumene was not detected. The factors influencing SPE e.g., adsorbent types, sample load volume, eluting solvent, headspace and temperatures, were investigated. A cartridge containing a C18 adsorbent and using dichloromethane gave a better performance for the extraction of BTEXC from water. Average recoveries exceeding 90% could be achieved for cumene at 4 degrees C with a 2.7% RSD.

Accelerated solvent extraction for natural products isolation.

Accelerated solvent extraction (ASE(®)), first introduced in 1995, is an automated rapid extraction technique that utilizes common solvents at elevated temperature and pressure, and thereby increases the efficiency of extraction of organic compounds from solid and semisolid matrices. ASE(®) allows extractions for sample sizes 1-100 g in minutes, reduces solvent uses dramatically, and can be applied to a wide range of matrices, including natural products.

Simultaneous analysis of select pharmaceuticals and personal care products in fish tissue using pressurized liquid extraction combined with silica gel cleanup.

Analytical improvements were developed and validated for measuring select personal care products (PCPs) and two pharmaceuticals in fish tissue. The method was validated using fortified fillet tissue for twelve PCPs including fragrance materials, alkylphenols, photo initiators, and triclosan as well as two pharmaceuticals including carbamazepine (anti-seizure) and diazepam (anti-convulsant). The analytical method utilized pressurized liquid extraction (PLE) combined with silica gel cleanup, gel permeation chromatography, and gas chromatography ion-trap tandem mass spectrometry. Silica gel cleanup was combined with the PLE to produce one automated extraction/cleanup technique. This analytical improvement served to reduce the incurred cost, time, and loss of potential target analytes associated with independent cleanup steps. The combined extraction/cleanup technique resulted in an average increase of 10% in analyte recoveries. Average triplicate recoveries and relative standard deviations for the entire method, using 2.5 g of fish fillet tissue, were 92 ± 9% (recoveries ranged from 64 to 131%). The sensitivity of the analytical methods was improved by optimizing the resonant collision induced dissociation energy to the hundredths place (0.01 V). Improvements in ion production range from 24 to 122% for six of the 12 PCPs. Statistically derived method detection limits (MDLs) were also lowered on average by a factor of 8 and ranged from 1.2 to 38 ng/g wet weight. MDLs for carbamazepine and diazepam were 18 and 3.7 ng/g wet weight, respectively. Galaxolide and tonalide were measured in an environmental sample at concentrations of 81 and 5.5 ng/g wet weight, respectively.

Analysis of pharmaceuticals in fish using liquid chromatography-tandem mass spectrometry.

A liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening method has been developed targeting 23 pharmaceuticals and 2 metabolites with differing physicochemical properties in fish tissue. Reversed-phase separation of target compounds was achieved using a C18 column and a nonlinear gradient consisting of 0.1% (v/v) formic acid and methanol. Eluted analytes were introduced into the mass analyzer using positive or negative electrospray ionization, as appropriate. A variety of extraction solvents, differing in polarity, pH, or both, were investigated in order to assess recovery of target compounds from 1-g tissue homogenates. Among 10 solvents tested, a 1:1 mixture of 0.1 M aqueous acetic acid (pH 4) and methanol was identified as optimal, resulting in extraction recoveries for 24 of 25 compounds exceeding 60%. Tissue extracts were found to influence the LC-MS/MS response for several analytes. Consequently, matrix-matched calibration standards were employed to determine analyte concentrations in environmental samples. Statistically derived method detection limits were <6 ng/g for most analytes. The method was subsequently used to screen for target analytes in fish from an effluent-dominated stream. Diphenhydramine, diltiazem, carbamazepine, and norfluoxetine were detected in 11 of 11 environmental samples at concentrations ranging from 0.11 to 5.14 ng/g.