Ligand-engineered bandgap stability in mixed-halide perovskite LEDs.

Lead halide perovskites are promising semiconductors for light-emitting applications because they exhibit bright, bandgap-tunable luminescence with high colour purity1,2. Photoluminescence quantum yields close to unity have been achieved for perovskite nanocrystals across a broad range of emission colours, and light-emitting diodes with external quantum efficiencies exceeding 20 per cent-approaching those of commercial organic light-emitting diodes-have been demonstrated in both the infrared and the green emission channels1,3,4. However, owing to the formation of lower-bandgap iodide-rich domains, efficient and colour-stable red electroluminescence from mixed-halide perovskites has not yet been realized5,6. Here we report the treatment of mixed-halide perovskite nanocrystals with multidentate ligands to suppress halide segregation under electroluminescent operation. We demonstrate colour-stable, red emission centred at 620 nanometres, with an electroluminescence external quantum efficiency of 20.3 per cent. We show that a key function of the ligand treatment is to 'clean' the nanocrystal surface through the removal of lead atoms. Density functional theory calculations reveal that the binding between the ligands and the nanocrystal surface suppresses the formation of iodine Frenkel defects, which in turn inhibits halide segregation. Our work exemplifies how the functionality of metal halide perovskites is extremely sensitive to the nature of the (nano)crystalline surface and presents a route through which to control the formation and migration of surface defects. This is critical to achieve bandgap stability for light emission and could also have a broader impact on other optoelectronic applications-such as photovoltaics-for which bandgap stability is required.

Resistive gas sensors for the detection of NH3gas based on 2D WS2, WSe2, MoS2, and MoSe2: a review.

Transition metal dichalcogenides (TMDs) with a two-dimensional (2D) structure and semiconducting features are highly favorable for the production of NH3gas sensors. Among the TMD family, WS2, WSe2, MoS2, and MoSe2exhibit high conductivity and a high surface area, along with high availability, reasons for which they are favored in gas-sensing studies. In this review, we have discussed the structure, synthesis, and NH3sensing characteristics of pristine, decorated, doped, and composite-based WS2, WSe2, MoS2, and MoSe2gas sensors. Both experimental and theoretical studies are considered. Furthermore, both room temperature and higher temperature gas sensors are discussed. We also emphasized the gas-sensing mechanism. Thus, this review provides a reference for researchers working in the field of 2D TMD gas sensors.

Lignin-based barrier restricts pathogens to the infection site and confers resistance in plants.

Pathogenic bacteria invade plant tissues and proliferate in the extracellular space. Plants have evolved the immune system to recognize and limit the growth of pathogens. Despite substantial progress in the study of plant immunity, the mechanism by which plants limit pathogen growth remains unclear. Here, we show that lignin accumulates in Arabidopsis leaves in response to incompatible interactions with bacterial pathogens in a manner dependent on Casparian strip membrane domain protein (CASP)-like proteins (CASPLs). CASPs are known to be the organizers of the lignin-based Casparian strip, which functions as a diffusion barrier in roots. The spread of invading avirulent pathogens is prevented by spatial restriction, which is disturbed by defects in lignin deposition. Moreover, the motility of pathogenic bacteria is negatively affected by lignin accumulation. These results suggest that the lignin-deposited structure functions as a physical barrier similar to the Casparian strip, trapping pathogens and thereby terminating their growth.

Synthesis of Thermally Stable and Highly Luminescent Cs5 Cu3 Cl6 I2 Nanocrystals with Nonlinear Optical Response.

Low-dimensional Cu(I)-based metal halide materials are gaining attention due to their low toxicity, high stability and unique luminescence mechanism, which is mediated by self-trapped excitons (STEs). Among them, Cs5 Cu3 Cl6 I2 , which emits blue light, is a promising candidate for applications as a next-generation blue-emitting material. In this article, an optimized colloidal process to synthesize uniform Cs5 Cu3 Cl6 I2 nanocrystals (NCs) with a superior quantum yield (QY) is proposed. In addition, precise control of the synthesis parameters, enabling anisotropic growth and emission wavelength shifting is demonstrated. The synthesized Cs5 Cu3 Cl6 I2 NCs have an excellent photoluminescence (PL) retention rate, even at high temperature, and exhibit high stability over multiple heating-cooling cycles under ambient conditions. Moreover, under 850-nm femtosecond laser irradiation, the NCs exhibit three-photon absorption (3PA)-induced PL, highlighting the possibility of utilizing their nonlinear optical properties. Such thermally stable and highly luminescent Cs5 Cu3 Cl6 I2 NCs with nonlinear optical properties overcome the limitations of conventional blue-emitting nanomaterials. These findings provide insights into the mechanism of the colloidal synthesis of Cs5 Cu3 Cl6 I2 NCs and a foundation for further research.

Transantral Approach With an Optical Navigation System for Cystic Lesions at the Pterygoid Process.

A 48-year-old woman with hypernasality symptoms and discomfort in the right maxillary area was diagnosed with cystic lesions at the pterygoid process and linguoposterior mandible area. Cyst enucleation was performed through a transantral approach with an optical navigation system. A bony window on the anterior sinus wall was created, and an optical navigation system was used to locate the cystic lesions. After the cystic mass was removed, the bony window was repositioned with prebent plates. Both cystic lesions were diagnosed as postoperative maxillary cysts, and no other complications were observed.

Metastasis of Renal Cell Carcinoma to the Mandible.

Renal cell carcinoma (RCC) is the most common tumor of the kidney. Although RCC often metastasizes to other organs, metastasis to the head and neck region is rare, and metastasis to the mandible is very unusual. Given the fact that metastasis of primary neoplasms is not always predictable, it is essential to rule out metastatic carcinoma in jaw lesions. We herein report a rare presentation of metastasis of RCC to the mandible, in which the metastatic lesion in the oral cavity was found first, followed by the primary lesion, in a 22-year-old girl who suffered from pain in the left temporomandibular joint on mouth opening and hypoesthesia of the left chin, left lower lip, and left lower gum.

Craniofacial Epidermoid and Dermoid Cysts.

BACKGROUND: Epidermoid and dermoid cysts are benign developmental anomalies that can form anywhere in the body. Despite the rarity of incidence in the head and neck, they can arise at a variety of craniofacial locations. The purpose of this study was to analyze the clinical features of epidermoid and dermoid cysts arising in the craniofacial region with a literature review. METHODS: A retrospective study was designed, and clinical features and surgical considerations were investigated from a literature review. Cases of epidermoid cysts in the scalp, temporal area, glabellar area, mouth floor, and buccal mucosa were described. RESULTS: Dermoid cysts in more lateral regions of the scalp are rarely associated with intracranial extension. Because temporal dermoid cysts have a high rate of intracranial extension, radiological evaluation of the lesions in the temporal area is imperative. Epidermoid cysts in the glabellar area are usually superficial. Consideration of the surgical approach for an epidermoid cyst of the mouth floor is important. Because epidermoid cysts in the buccal mucosa are extremely rare, differential diagnosis was emphasized. Epidermoid cysts in the scalp, in the temporal intradiploic area, on the glabellar area in the periorbital region, in the mouth floor, and in the buccal mucosa were surgically excised considering the depth and location. Ten cases of epidermoid cysts in the buccal mucosa were retrieved from the literature review. CONCLUSIONS: Consideration of the anatomic locations of epidermoid and dermoid cysts in the craniofacial region might help facilitate accurate diagnosis and treatment.

Evaluation of a Commercial Device Based on Reflection Spectroscopy as an Alternative to Resonance Raman Spectroscopy in Measuring Skin Carotenoid Levels: Randomized Controlled Trial.

Resonance Raman spectroscopy (RRS) has been used as a reference method for measuring skin carotenoid levels (SCL), which indicate vegetable and fruit intake. However, RRS is not an easy-to-use method in SCL measurement due to its complicated implementation. In this study, a commercial spectrophotometer based on reflection spectroscopy (RS), which is relatively simple and inexpensive, was evaluated to confirm usability compared with RRS in measuring SCL. To investigate the agreement between RS and RRS, eighty participants were randomly assigned to a high-carotenoid diet group (21 mg/day of total carotenoids) or a control-carotenoid diet group (14 mg/day of total carotenoids) during a 6-week whole-diet intervention period and a 4-week tracking period. Strong correlations between the RS and RRS methods were observed at baseline (r = 0.944) and the entire period (r = 0.930). The rate of SCL increase was similar during the diet intervention; however, the initiation of the SCL decrease in RS was slower than in RRS during the tracking period. To confirm the agreement of RS and RRS from various perspectives, new visualization tools and indices were additionally applied and confirmed the similar response patterns of the two methods. The results indicate that the proposed RS method could be an alternative to RRS in SCL measurements.

Room Temperature Chemiresistive Gas Sensors Based on 2D MXenes.

Owing to their large surface area, two-dimensional (2D) semiconducting nanomaterials have been extensively studied for gas-sensing applications in recent years. In particular, the possibility of operating at room temperature (RT) is desirable for 2D gas sensors because it significantly reduces the power consumption of the sensing device. Furthermore, RT gas sensors are among the first choices for the development of flexible and wearable devices. In this review, we focus on the 2D MXenes used for the realization of RT gas sensors. Hence, pristine, doped, decorated, and composites of MXenes with other semiconductors for gas sensing are discussed. Two-dimensional MXene nanomaterials are discussed, with greater emphasis on the sensing mechanism. MXenes with the ability to work at RT have great potential for practical applications such as flexible and/or wearable gas sensors.

Blue Perovskite Nanocrystal Light-Emitting Diodes: Overcoming RuddlesdenPopper Fault-Induced Nonradiative Recombination via Post-Halide Exchange.

Metal halide perovskites (MHPs) have gained traction as emitters owing to their excellent optical properties, such as facile bandgap tuning, defect tolerance, and high color purity. Nevertheless, blue-emitting MHP light-emitting diodes (LEDs) show only marginal progress in device efficiency compared with green and red LEDs. Herein, the origin of the drop in efficiency of blue-emitting perovskite nanocrystals (PNCs) by mixing halides and the genesis of Ruddlesden-Popper faults (RPFs) in CsPbBrX Cl3-X nanocrystals is investigated. Using scanning transmission electron microscopy and density functional theory calculations, the authors have found that RPFs induce possible nonradiative recombination pathways owing to the high chloride vacancy concentration nearby. The authors further confirm that the blue-emitting PNCs do not show RPFs post-halide exchange in the CsPbBr3 nanocrystals. By introducing the post-halide exchange treatment, high-efficiency pure blue-emitting (464 nm) PNC-based LEDs with an external quantum efficiency of 2.1% and excellent spectral stability with a full-width at half-maximum of 14 nm are obtained.

Triphenylamine-Based Conjugated Polyelectrolyte as a Hole Transport Layer for Efficient and Scalable Perovskite Solar Cells.

π-Conjugated polyelectrolytes (CPEs) have been studied as interlayers on top of a separate hole transport layer (HTL) to improve the wetting, interfacial defect passivation, and crystal growth of perovskites. However, very few CPE-based HTLs have been reported without rational molecular design as ideal HTLs for perovskite solar cells (PeSCs). In this study, the authors synthesize a triphenylamine-based anionic CPE (TPAFS-TMA) as an HTL for p-i-n-type PeSCs. TPAFS-TMA has appropriate frontier molecular orbital (FMO) levels similar to those of the commonly used poly(bis(4-phenyl)-2,4,6-trimethylphenylamine) (PTAA) HTL. The ionic and semiconducting TPAFS-TMA shows high compatibility, high transmittance, appropriate FMO energy levels for hole extraction and electron blocking, as well as defect passivating properties, which are confirmed using various optical and electrical analyses. Thus, the PeSC with the TPAFS-TMA HTL exhibits the best power conversion efficiency (PCE) of 20.86%, which is better than that of the PTAA-based device (PCE of 19.97%). In addition, it exhibits negligible device-to-device variations in its photovoltaic performance, contrary to the device with PTAA. Finally, a large-area PeSC (1 cm2 ) and mini-module (3 cm2 ), showing PCEs of 19.46% and 18.41%, respectively, are successfully fabricated. The newly synthesized TPAFS-TMA may suggest its great potential as an HTL for large-area PeSCs.

The transcription factor ORA59 exhibits dual DNA binding specificity that differentially regulates ethylene- and jasmonic acid-induced genes in plant immunity.

Jasmonic acid (JA) and ethylene (ET) signaling modulate plant defense against necrotrophic pathogens in a synergistic and interdependent manner, while JA and ET also have independent roles in certain processes, e.g. in responses to wounding and flooding, respectively. These hormone pathways lead to transcriptional reprogramming, which is a major part of plant immunity and requires the roles of transcription factors. ET response factors are responsible for the transcriptional regulation of JA/ET-responsive defense genes, of which ORA59 functions as a key regulator of this process and has been implicated in the JA-ET crosstalk. We previously demonstrated that Arabidopsis (Arabidopsis thaliana) GDSL LIPASE 1 (GLIP1) depends on ET for gene expression and pathogen resistance. Here, promoter analysis of GLIP1 revealed ERELEE4 as the critical cis-element for ET-responsive GLIP1 expression. In a yeast one-hybrid screening, ORA59 was isolated as a specific transcription factor that binds to the ERELEE4 element, in addition to the well-characterized GCC box. We found that ORA59 regulates JA/ET-responsive genes through direct binding to these elements in gene promoters. Notably, ORA59 exhibited a differential preference for GCC box and ERELEE4, depending on whether ORA59 activation is achieved by JA and ET, respectively. JA and ET induced ORA59 phosphorylation, which was required for both activity and specificity of ORA59. Furthermore, RNA-seq and virus-induced gene silencing analyses led to the identification of ORA59 target genes of distinct functional categories in JA and ET pathways. Our results provide insights into how ORA59 can generate specific patterns of gene expression dynamics through JA and ET hormone pathways.

The usefulness of dual channel elastomeric pump for intravenous patient-controlled analgesia in geriatrics: a randomized, double-blind, prospective study.

BACKGROUND: Intravenous patient-controlled analgesia (IV-PCA) is often used in the postoperative period. However, determining an appropriate opioid dose is difficult. A previous study suggested the usefulness of variable-rate feedback infusion. In this study, we used a dual-channel elastomeric infusion pump to provide changes in PCA infusion rate by pain feedback. METHODS: Ninety patients undergoing orthopedic surgery of American Society of Anesthesiologists grade I-III and 65 to 79 years of age participated in the study. All patients were given a dual-chamber PCA. Patients were randomly allocated to a treatment group (Group D; PCA drugs divided into both chambers) or control group (Group C; PCA drugs only in the constant flow chamber with normal saline in the adjustable flow chamber). The primary outcome was the amount of fentanyl consumption via PCA bolus. The secondary outcome variables were pain score, total fentanyl consumption, rescue analgesic use, patient satisfaction, recovery scores, and adverse events including postoperative nausea and vomiting (PONV). RESULTS: Group D showed decreased fentanyl consumption of the PCA bolus, a decrease in rescue analgesic use, and better patient satisfaction compared with group C. The incidence of PONV was much higher in group C. There was no difference in other adverse events. CONCLUSIONS: We showed the usefulness of dual chamber IV-PCA to change the flow rate related to pain feedback without any complications. Our results suggest a noble system that might improve existing IV-PCA equipment. TRIAL REGISTRATION: The study registered at UMIN clinical trial registry (registered date: 05/03/2020, registration number: UMIN000039702 ).

Primary intraosseous carcinoma in the pediatric and adolescent mandible.

BACKGROUND: Primary intraosseous carcinoma (PIOC) is a rare malignant odontogenic tumor that predominantly occurs in males older than 50 years. PIOC can be misdiagnosed as odontogenic cyst because it occasionally shows a well-defined border on radiography. In this study, related literatures of pediatric and adolescent PIOC cases were analyzed under strict PRISMA guidelines along with an adolescent case who was provisionally misdiagnosed as an odontogenic cyst. METHODS: All case reports for PIOC published in English from 1966 to 2021 were collected. Cases under the age of 20 were classified as pediatric and adolescent populations in this study. A total of 12 pediatric and adolescent cases including 11 PIOCs from the literature and one new case of a 14-year-old female were analyzed. Clinical and radiographic features, diagnosis and treatment approaches, and prognosis were investigated. RESULTS: Ages ranged from 4 to 18 years. The female to male ratio was 1.4:1. Seven cases occurred in the mandible. Swelling was observed in 11 patients. The radiologic borders were well-defined in six cases and corticated in four cases. Tooth displacement and root resorption were observed in four and six cases, respectively. The provisional diagnosis for seven patients was odontogenic cyst and enucleation was performed in six cases including the new case. During the follow-up period, local recurrence occurred in three patients. The pediatric and adolescent PIOC cases with local recurrence showed poor prognosis. The locally recurred lesion in the new case did not decrease in size despite concurrent chemo-radiation therapy. CONCLUSIONS: Three-dimensional imaging modalities and incisional biopsy with multiple specimens are necessary to rule out PIOC in the lesions with atypical radiographic findings. PIOC should be diagnosed differentially from odontogenic cyst even in pediatric and adolescent populations to properly manage the disease with poor prognosis.

A Life-Saving Early Diagnosis of Burkitt Lymphoma: The Role of a Dentist.

ABSTRACT: Burkitt lymphoma (BL) is a subtype of Non-Hodgkin lymphoma, considered one of the fastest growing human tumors. Due to the highly aggressive nature of BL, a prompt diagnosis and aggressive chemotherapeutic treatment are essential. However, the clinical features of BL often can mimic periodontal disease or dentoalveolar abscess. The aim of this study is to present a case of a 31-year-old male patient who was referred to the department of oral and maxillofacial surgery for severe neurosensory disturbance and pain in the lower jaw. He was misdiagnosed with periodontitis and dental abscess at the local clinic. Based on radiographic findings, he was suspected of hematopoietic malignancy. He was referred to the department of hemato-oncology and diagnosed with BL. This case highlights the essential life-saving role of a maxillofacial surgeon in the early diagnosis of a rare malignancy.

Burst Stimulation of the Thoracic Spinal Cord near a Cardiac Pacemaker in an Elderly Patient with Postherpetic Neuralgia: A Case Report.

New developments in spinal cord stimulation (SCS) have improved the treatment of patients with chronic pain. Although the overall safety of modern SCS has been established, there are no published reports regarding safety considerations when implanting a burst-mode spinal cord stimulator in patients with permanent cardiac pacemakers (PCPs). An 80-year-old man with a complete atrioventricular block implanted with a PCP was considered as a candidate for burst-mode SCS due to well-established postherpetic neuralgia (>180 days after rash). Cardiac monitoring during the burst-mode spinal cord stimulator trial and insertion did not indicate any interference. After the insertion of the burst-mode spinal cord stimulator, the patient showed functional improvement and significant pain relief. The safety of traditional tonic-mode SCS in patients with PCP has been previously reported. This is the first case report describing the safe and effective use of burst-mode SCS in a patient with PCP.

Temperature Correction to Enhance Blood Glucose Monitoring Accuracy Using Electrical Impedance Spectroscopy.

Electrical methods are among the primarily studied non-invasive glucose measurement techniques; however, various factors affect the accuracy of the sensors used. Of these, the temperature is a critical factor; hence, the effects of temperature on the electrical properties of blood components are investigated in this study. Furthermore, the changes in the electrical properties of blood according to the glucose level are corrected by considering the effects of temperature on the electrical properties. An impedance sensor is developed and used to measure whole blood impedance in 10 healthy participants at various temperatures and glucose levels. Subsequently, the conductivities of the plasma and cytoplasm were extracted. Changes in the electrical properties of the blood components are then analyzed using linear regression and repeated measures ANOVA. The electrical conductivities of plasma and cytoplasm increased with increasing temperatures (plasma: 0.0397 (slope), 0.7814 (R2), cytoplasm: 0.014 (slope), 0.694 (R2)). At three values of increasing glucose levels (85.4, 158.1, and 271.8 mg/dL), the electrical conductivities of the plasma and cytoplasm decreased. These tendencies are more significant upon temperature corrections (p-values; plasma: 0.001, 0.001, cytoplasm: 0.003, 0.002). The relationships between temperature and electrical conductivity changes can thus be used for temperature corrections in blood glucose measurement.

Nanomechanical Approach for Flexibility of Organic-Inorganic Hybrid Perovskite Solar Cells.

The mechanical flexibility of perovskite solar cells as well as high power conversion efficiency is attracting increasing attention. In addition to existing empirical approaches, such as cyclic bending tests, in this study we report the tensile properties of the perovskite materials themselves. Measuring the tensile properties of free-standing perovskite materials is critical because (1) tensile properties represent the realistic mechanical properties of the film-type perovskite layer in the solar cells including the effects of various defects, and (2) deformation behavior of the perovskite layer at any deformed state of the solar cells can be analyzed using solid mechanics with the tensile properties as input. Critical bending radius of MAPbI3-based flexible solar cells is found to be between 0.5 and 1.0 mm by the decrease in power conversion efficiency during cyclic bending deformation. This finding agrees well with the critical bending radius of 0.66 mm determined based on the elastic deformation limit of 1.17% for MAPbI3 found by in situ tensile testing. Scanning electron microscopy observations and hole-nanoindentation tests suggest that the formation of coarse cracks in the perovskite layers is the primary cause of the decrease in power conversion efficiency observed in flexible perovskite solar cells.

Flexibility of Semitransparent Perovskite Light-Emitting Diodes Investigated by Tensile Properties of the Perovskite Layer.

Organic-inorganic hybrid perovskites have been investigated extensively for use in perovskite-based solar cells and light-emitting diodes (LEDs) because of their excellent electrical and optical properties. Although the flexibility of perovskite LEDs has been studied through empirical methods such as cyclic bending tests, the flexibility of the perovskite layer has not been investigated systemically. Here, flexible and semitransparent perovskite LEDs are fabricated: a PEDOT:PSS anode and Ag nanowire cathode allow for flexible and semitransparent devices, while the use of a conjugated polyelectrolyte as an interfacial layer reduces the electron injection barrier between the cathode and the electron transport layer (SPW-111), resulting in enhanced device efficiency. Cyclic bending tests performed on the electrodes and in situ hole-nanoindentation tests performed on the constituent materials suggest that mechanical failure occurs in the perovskite MAPbBr3 layer during cyclic bending, leading to a decrease in the luminance. Tensile properties of the MAPbBr3 layer explain the critical bending radius ( rb) of the perovskite LEDs on the order of 1 mm.

Facile Synthesis of Stable and Highly Luminescent Methylammonium Lead Halide Nanocrystals for Efficient Light Emitting Devices.

Metal halide perovskites are promising candidates for use in light emitting diodes (LEDs), due to their potential for color tunable and high luminescence efficiency. While recent advances in perovskite-based light emitting diodes have resulted in external quantum efficiencies exceeding 12.4% for the green emitters, and infrared emitters based on 3 D/2D mixed dimensional perovskites have exceeded 20%, the external quantum efficiencies of the red and blue emitters still lag behind. A critical issue to date is creating highly emissive and stable perovskite emitters with the desirable emission band gap to achieve full-color displays and white LEDs. Herein, we report the preparation and characterization of a highly luminescent and stable suspension of cubic-shaped methylammonium lead triiodide (CH3NH3PbI3) perovskite nanocrystals, where we synthesize the nanocrystals via a ligand-assisted reprecipitation technique, using an acetonitrile/methylamine compound solvent system to solvate the ions and toluene as the antisolvent to induce crystallization. Through tuning the ratio of the ligands, the ligand to toluene ratio, and the temperature of the toluene, we obtain a solution of CH3NH3PbI3 nanocrystals with a photoluminescence quantum yield exceeding 93% and tunable emission between 660 and 705 nm. We also achieved red emission at 635 nm by blending the nanocrystals with bromide salt and obtained perovskite-based light emitting diodes with maximum electroluminescent external quantum efficiency of 2.75%.