RESUMO
BACKGROUND: This study validated the accuracy of the acromion marker cluster (AMC) and scapula spinal marker cluster (SSMC) methods compared with upright four-dimensional computed tomography (4DCT) analysis. METHODS: Sixteen shoulders of eight healthy males underwent AMC and SSMC assessments. Active shoulder elevation was tracked using upright 4DCT and optical motion capture system. The scapulothoracic and glenohumeral rotation angles calculated from AMC and SSMC were compared with 4DCT. Additionally, the motion of these marker clusters on the skin with shoulder elevation was evaluated. RESULTS: The average differences between AMC and 4DCT during 10°-140° of humerothoracic elevation were - 2.2° ± 7.5° in scapulothoracic upward rotation, 14.0° ± 7.4° in internal rotation, 6.5° ± 7.5° in posterior tilting, 3.7° ± 8.1° in glenohumeral elevation, - 8.3° ± 10.7° in external rotation, and - 8.6° ± 8.9° in anterior plane of elevation. The difference between AMC and 4DCT was significant at 120° of humerothoracic elevation in scapulothoracic upward rotation, 50° in internal rotation, 90° in posterior tilting, 120° in glenohumeral elevation, 100° in external rotation, and 100° in anterior plane of elevation. However, the average differences between SSMC and 4DCT were - 7.5 ± 7.7° in scapulothoracic upward rotation, 2.0° ± 7.0° in internal rotation, 2.3° ± 7.2° in posterior tilting, 8.8° ± 7.9° in glenohumeral elevation, 2.0° ± 9.1° in external rotation, and 1.9° ± 10.1° in anterior plane of elevation. The difference between SSMC and 4DCT was significant at 50° of humerothoracic elevation in scapulothoracic upward rotation and 60° in glenohumeral elevation, with no significant differences observed in other rotations. Skin motion was significantly smaller in AMC (28.7 ± 4.0 mm) than SSMC (38.6 ± 5.8 mm). Although there was smaller skin motion in AMC, SSMC exhibited smaller differences in scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation compared to 4DCT. CONCLUSION: This study demonstrates that AMC is more accurate for assessing scapulothoracic upward rotation and glenohumeral elevation, while SSMC is preferable for evaluating scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation, with smaller differences compared to 4DCT.
Assuntos
Acrômio , Tomografia Computadorizada Quadridimensional , Amplitude de Movimento Articular , Escápula , Articulação do Ombro , Humanos , Masculino , Escápula/diagnóstico por imagem , Escápula/fisiologia , Tomografia Computadorizada Quadridimensional/métodos , Adulto , Fenômenos Biomecânicos/fisiologia , Acrômio/diagnóstico por imagem , Acrômio/fisiologia , Amplitude de Movimento Articular/fisiologia , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/fisiologia , Adulto Jovem , RotaçãoRESUMO
OBJECTIVE: To quantitatively assess the impact of supine and standing positions on the morphological changes in the lumbar intervertebral foramen (LIF) in patients with adult spinal deformity (ASD) using upright CT and conventional supine CT. MATERIALS AND METHODS: Thirty patients with ASD were prospectively enrolled in this study. All subjects underwent standing whole spine posterior/anterior radiographs, lateral radiographs, and whole spine CT, both in the supine and upright standing positions. Two orthopedic surgeons independently measured nine radiographic parameters in the radiograph and the lumbar foraminal area (FA) and height (FH) in supine and upright CT. Statistical analyses were performed to evaluate the risk of LIF decrease when standing upright compared to the supine position. The chi-squared, t test, Pearson's coefficients, intra- and inter-rater reliabilities, and ROC curves were calculated. The level of significance was set at p < 0.05. RESULTS: Among the 300 LIFs, both the lumbar FA and FH were either increased or decreased by > 5% in approximately 30% of LIFs each. The FA decreased in the lower lumbar spine. The concave side had a significantly higher rate of decreased FA and FH than the convex side (p < 0.05 and < 0.05, respectively). ROC analysis showed that narrowing of the intervertebral disc (cutoff > 0.05°) is a risk factor for decreased FA and FH. CONCLUSIONS: This study describes the details of the changes in the neuroforamen using a novel upright CT. In patients with ASD, approximately 30% of LIFs either increased or decreased in size by > 5% when standing. The risk factors for LIF decrease are the lower lumbar spine, concave side, and narrow side of the disc wedge.
Assuntos
Disco Intervertebral , Posição Ortostática , Humanos , Adulto , Tomografia Computadorizada por Raios X/métodos , Região Lombossacral , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Postura , Decúbito DorsalRESUMO
PURPOSE: The aim of this study was to determine the potential mechanism of implant fracture using 3-dimensional motion analysis of patients with rheumatoid arthritis. METHODS: Active flexion motion in 9 hands (34 fingers) of 6 female patients with rheumatoid arthritis who previously underwent hinged silicone metacarpophalangeal joint arthroplasty was examined using 4-dimensional computed tomography. Positions of the proximal phalanges relative to the metacarpals were quantified using a surface registration method. The deformation of the silicone implant was classified in the sagittal plane in the maximum flexion frame. The longitudinal bone axis of the proximal phalanx and the helical axis of the proximal phalanx were evaluated in 3-dimensional coordinates based on the hinge of the silicone implant. RESULTS: Nineteen fingers were classified into group 1, in which the silicone implant moved volarly during flexion without buckling of the distal stem. Twelve fingers were classified into group 2, in which the distal stem of the silicone implant buckled. Three fingers were classified into group 3, in which the base of the distal stem had already fractured. Quantitatively, the longitudinal bone axes of the proximal phalanges were displaced from dorsal to volar in the middle stage of flexion and migrated in the proximal direction in the late phase of flexion. The helical axes of the proximal phalanges were located on the dorsal and proximal sides of the hinge, and these tended to move in the volar and proximal directions as the metacarpophalangeal joint flexed. CONCLUSIONS: Volar and proximal translation of the proximal phalange was observed on 4-dimensional computed tomography. CLINICAL RELEVANCE: Proximal displacement of the bone axis late in flexion appears to be a contributing factor inducing implant fractures, because the pistoning motion does not allow the implant to move in the proximal direction.
Assuntos
Artrite Reumatoide , Fraturas Ósseas , Prótese Articular , Humanos , Feminino , Fenômenos Biomecânicos , Artroplastia , Articulação Metacarpofalângica/diagnóstico por imagem , Articulação Metacarpofalângica/cirurgia , Silicones , Artrite Reumatoide/diagnóstico por imagem , Artrite Reumatoide/cirurgia , Fraturas Ósseas/cirurgiaRESUMO
The relationship between the onset of sweating (OS) and sweat lactate threshold (sLT) assessed using a novel sweat lactate sensor remains unclear. We aimed to investigate the implications of the OS on the sLT. Forty healthy men performed an incremental cycling test. We monitored the sweat lactate, blood lactate, and local sweating rates to determine the sLT, blood LT (bLT), and OS. We defined participants with the OS during the warm-up just before the incremental test as the early perspiration (EP) group and the others as the regular perspiration (RP) group. Pearson's correlation coefficient analysis revealed that the OS was poorly correlated with the sLT, particularly in the EP group (EP group, r = 0.12; RP group, r = 0.56). Conversely, even in the EP group, the sLT was strongly correlated with the bLT (r = 0.74); this was also the case in the RP group (r = 0.61). Bland-Altman plots showed no bias between the mean sLT and bLT (mean difference: 19.3 s). Finally, in five cases with a later OS than bLT, the sLT tended to deviate from the bLT (mean difference, 106.8 s). The sLT is a noninvasive and continuous alternative to the bLT, independent of an early OS, although a late OS may negatively affect the sLT.
Assuntos
Suor , Sudorese , Masculino , Humanos , Ácido Láctico , CiclismoRESUMO
PURPOSE: A close relationship between sagittal spinal alignment and hip osteoarthritis (OA) has been documented. This study aimed to examine the relationship between hip joint proximity area and sagittal balance parameters in healthy subjects. METHODS: This prospective study enrolled 47 healthy volunteers who underwent 320-detector row upright computed tomography. Acquired data were reconstructed in a virtual three-dimensional space. The proximity area was determined by < 1 mm of the Hausdorff distance between the acetabulum and the femoral head. Volunteers were divided into the anterior and posterior proximity groups depending on the position of the closest area. Sagittal balance parameters [sagittal vertical axis (SVA), T1 spinopelvic inclination (T1-SPi), T1-pelvic angle, pelvic tilt, sacral slope, pelvic incidence, lumbar lordosis, thoracic kyphosis), offset distance between the centre of the acoustic meati (CAM) and C7 plumb line (CAM-C7-offset), and offset distance between the CAM and hip axis (HA) (CAM-HA-offset)] were compared between the two groups using independent sample t test. RESULTS: The anterior proximity group (n = 24) had higher SVA (p = 0.016) and T1-Spi (p = 0.015) than the posterior proximity group (n = 23). CAM-HA-offset was higher in the posterior than in the anterior proximity group (p < 0.000). There was no difference in other parameters (p > 0.05). CONCLUSION: The anterior proximity group had a positive anterior spinal balance; the posterior proximity group may have a more posterior gravity line than the hip joint centre. The anterior spinal balance may contribute to the anterior loading of the hip joint, with known relation with the initiation and onset of hip OA.
Assuntos
Lordose , Articulação do Quadril/diagnóstico por imagem , Humanos , Estudos Prospectivos , Sacro , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Risk for non-contact anterior cruciate ligament (ACL) injury can be assessed based on drop vertical jump (DVJ). However, biomechanics of DVJ may differ with various sporting activities. The purpose of the present study was to clarify whether biomechanical features of DVJ are different among various sporting activities in female athletes. METHODS: A total of 42 female athletes, including 25 basketball, 8 soccer and 9 volleyball players, participated in the current investigation. DVJ was done for each female athlete using a three-dimensional motion analysis system which consisted of six cameras, two force plates and 46 retro-reflective markers. Kinematic and kinetic data were recorded for both limbs in each athlete. Simultaneously, frontal and sagittal plane views of the DVJ were recorded using two different high-resolution video cameras to evaluate Landing Error Scoring System (LESS) score. Three-dimensional biomechanical parameters at the knee joint and LESS were compared among three different sporting activities using ANOVA or Kruskal-Wallis test after confirming normality assumption. Thereafter post hoc Tukey or Steel-Dwass was utilized for multiple comparison. RESULTS: Soccer players had better LESS score, and peak knee flexion angle was significantly larger in soccer players compared to the other sports. In addition, knee abduction angle at initial contact (IC), peak knee abduction angle, knee internal rotation angle, and knee abduction moment within 40 ms from IC were significantly smaller in soccer players, compared to basketball players. In terms of volleyball players, knee abduction angle at IC and knee internal rotation angle at IC were significantly larger than soccer players, whereas no significant biomechanical differences were found between basketball and volleyball players. CONCLUSIONS: From the present study, female basketball and volleyball players have worse LESS score, smaller peak knee flexion angle, greater knee abduction angle at IC and greater knee internal rotation angle at IC, compared to female soccer players. Thus, female basketball and volleyball players may have an increased risk of non-contact ACL injury during the jump-landing task, compared to soccer players. Biomechanics of DVJ depends on characteristics of the athlete's primary sport.
Assuntos
Lesões do Ligamento Cruzado Anterior , Basquetebol , Futebol , Atletas , Basquetebol/lesões , Fenômenos Biomecânicos , Feminino , Humanos , Joelho , Articulação do Joelho , Futebol/lesõesRESUMO
BACKGROUND: The classification of knee osteoarthritis is an essential clinical issue, particularly in terms of diagnosing early knee osteoarthritis. However, the evaluation of three-dimensional limb alignment on two-dimensional radiographs is limited. This study evaluated the three-dimensional changes induced by weight-bearing in the alignments of lower limbs at various stages of knee osteoarthritis. METHODS: Forty five knees of 25 patients (69.9 ± 8.9 years) with knee OA were examined in the study. CT images of the entire leg were obtained in the supine and standing positions using conventional CT and 320-row detector upright CT, respectively. Next, the differences in the three-dimensional alignment of the entire leg in the supine and standing positions were obtained using 3D-3D surface registration technique, and those were compared for each Kellgren-Lawrence grade. RESULTS: Greater flexion, adduction, and tibial internal rotation were observed in the standing position, as opposed to the supine position. Kellgren-Lawrence grades 1 and 4 showed significant differences in flexion, adduction, and tibial internal rotation between two postures. Grades 2 and 4 showed significant differences in adduction, while grades 1 and 2, and 1 and 3 showed significant differences in tibial internal rotation between standing and supine positions. CONCLUSIONS: Weight-bearing makes greater the three-dimensional deformities in knees with osteoarthritis. Particularly, greater tibial internal rotation was observed in patients with grades 2 and 3 compared to those with grade 1. The greater tibial internal rotation due to weight-bearing is a key pathologic feature to detect early osteoarthritic change in knees undergoing osteoarthritis.
Assuntos
Osteoartrite do Joelho , Posição Ortostática , Humanos , Osteoartrite do Joelho/diagnóstico por imagem , Tíbia/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Suporte de CargaRESUMO
BACKGROUND: A small, wearable thermo device that uses Peltier elements for programmed heat and cold stimulation has been developed recently and is expected to be applied in conventional contrast bath therapy. This study was aimed to examine improvements in trapezius muscle hardness and subjective symptoms resulting from alternating heat and cold stimulation, with different rates of cooling. METHODS: This cross-over study included four conditions. Twenty healthy young male individuals (age, 22.3 ± 4.5 years) participated in this study. These four interventions targeted the unilateral trapezius muscle of the dominant arm after a 15-min typing task. Specifically, heat and cold stimulations were applied at different ratios (the heating/cooling rate of 3:1, 3:2, and 3:3) or not applied. Each intervention was separated by at least one week. Skin temperature at the stimulation area was recorded using a data logger. Outcome measures included muscle hardness (measured using a portable tester) and subjective symptoms (muscle stiffness and fatigue). Each item was assessed at three time points: baseline, after typing, and after the intervention. RESULTS: Two-way analysis of variance with repeated measures found an interaction effect for muscle hardness between four conditions (3:1, 3:2, 3:3, and no) and three time points (p < 0.05). Only in the 3:1 condition were the post-intervention values lower than those after typing (p < 0.01). There was also an interaction effect for subjective muscle stiffness (p < 0.05); the values after the intervention in the 3:1 condition were lower than those after intervention in the no stimulation condition (p < 0.01). There was no significant relationship between changes in muscle hardness and changes in subjective symptoms in the 3:1 condition. CONCLUSIONS: Our results demonstrate that alternating heat and cold stimulations with a different cooling rate could affect the degree of improvement in muscle hardness and subjective symptoms. In particular, the 3:1 condition has the possibility to improved muscle hardness within the condition and subjective muscle stiffness between conditions. TRIAL REGISTRATION: UMIN000040620. Registered 1 June 2020, https://upload.umin.ac.jp/cgi-open-bin/ctr_e/ctr_view.cgi?recptno=R000046359.
Assuntos
Artropatias , Músculos Superficiais do Dorso , Dispositivos Eletrônicos Vestíveis , Adolescente , Adulto , Estudos Cross-Over , Temperatura Alta , Humanos , Masculino , Ombro , Adulto JovemRESUMO
BACKGROUND: For knee osteoarthritis (OA) treatment, it is important to correct the lower limb alignment including the foot. However, in the upright position, lower limb alignment is generally assessed from the body surface or radiographs, and it is a challenge to capture the exact characteristics of three-dimensional lower limb alignment. The purpose of the study was to measure lower limb alignment in patients with knee OA using upright computed tomography (CT) and radiography, and to identify features of knee joint deformity. METHODS: A total of 45 limbs in 25 patients with knee OA were enrolled. The subjects underwent both upright CT and radiography for the whole lower limb in the standing position. The joint angles were calculated on both images. The degree of knee OA was classified according to Kellgren-Lawrence (KL) grade by referring to radiography, which is mainly based on the degree of articular cartilage loss and severity of osteophytes, and the characteristics or correlation between knee and ankle joint in each group was investigated. RESULTS: In KL-I, there was an association between varus of the knee joint and internal rotation of the talocrural joint (r = 0.76, P < 0.05). In KL-II, there was an association between varus of the knee joint and eversion of the subtalar joint (r = 0.63, P < 0.05) and talocrural joint (r = - 0.65, P < 0.05). In KL-III, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.62, P < 0.05), and in KL-IV, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.58, P < 0.05). CONCLUSIONS: The lower limb alignment of patients with knee OA in the standing position was found that as knee OA worsened, it became apparent that compensatory knee joint alignment depended on the ankle joint rather than the subtalar joint. The results may help in the rehabilitation of patients with knee OA, since the ankle joint alignment has a significant impact on the knee joint during coarse movements involving load.
Assuntos
Articulação do Tornozelo , Mau Alinhamento Ósseo , Tornozelo , Articulação do Tornozelo/diagnóstico por imagem , Mau Alinhamento Ósseo/diagnóstico por imagem , Humanos , Articulação do Joelho/diagnóstico por imagem , Extremidade Inferior , Posição Ortostática , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVE: The tibia externally rotates to the femur during the last 20° of the knee extension motion. This kinematic phenomenon is well known as screw home movement (SHM). The purpose was to clarify the SHM in anterior cruciate ligament deficient (ACLD) knee using four-dimensional computed tomography (4DCT). MATERIALS AND METHODS: Six patients with a unilateral isolated ACLD knee participated. In the static position, CT scan of the both limbs of the femur and tibia were performed. Then, 4DCT was performed around knee. In the CT gantry, subjects were positioned in supine position with 45° of knee flexion on a triangle pillow and were asked to extend the knee to full extension within 10 s on each limb. The CT data were accumulated in digital imaging and communication in medicine (DICOM) data format. From the static CT and 4DCT DICOM data, three-dimensional surfaces of the knee joint were reconstructed. The whole tibia surface was matched into the partial tibia surface of that frame using 3D-3D registration technique. After the assessment of coordination system of the whole leg, knee flexion, abduction, and external rotation angle were calculated. RESULTS: Knee external rotation angle was significantly smaller on the ACLD side than on the contralateral unaffected side in 0-15° of knee flexion (P < 0.05 in 0, 5, 10, and 15 degrees), while the angle was similar during 15-60° of knee flexion. CONCLUSION: The absence of SHM in ACLD knee was detected using 3D-3D registration technique based on 4DCT.
Assuntos
Lesões do Ligamento Cruzado Anterior , Ligamento Cruzado Anterior , Ligamento Cruzado Anterior/diagnóstico por imagem , Fenômenos Biomecânicos , Parafusos Ósseos , Fêmur , Tomografia Computadorizada Quadridimensional , Humanos , Articulação do Joelho/diagnóstico por imagem , Amplitude de Movimento Articular , Tíbia/diagnóstico por imagemRESUMO
BACKGROUND: Precision placement of implants in total elbow arthroplasty (TEA) using conventional surgical techniques can be difficult and riddled with errors. Modern technologies such as augmented reality (AR) and 3-dimensional (3D) printing have already found useful applications in many fields of medicine. We proposed a cutting-edge surgical technique, augmented reality total elbow arthroplasty (ARTEA), that uses AR and 3D printing to provide 3D information for intuitive preoperative planning. The purpose of this study was to evaluate the accuracy of humeral and ulnar component placement using ARTEA. METHODS: Twelve upper extremities from human frozen cadavers were used for experiments performed in this study. We scanned the extremities via computed tomography prior to performing TEA to plan placement sites using computer simulations. The ARTEA technique was used to perform TEA surgery on 6 of the extremities, whereas conventional (non-ARTEA) techniques were used on the other 6 extremities. Computed tomography scanning was repeated after TEA completion, and the error between the planned and actual placements of humeral and ulnar components was calculated and compared. RESULTS: For humeral component placement, the mean positional error ± standard deviation of ARTEA vs. non-ARTEA was 1.4° ± 0.6° vs. 4.4° ± 0.9° in total rotation (P = .002) and 1.5 ± 0.6 mm vs. 8.6 ± 1.3 mm in total translation (P = .002). For ulnar component placement, the mean positional error ± standard deviation of ARTEA vs. non-ARTEA was 5.5° ± 3.1° vs. 19.5° ± 9.8° in total rotation (P = .004) and 1.5 ± 0.4 mm vs. 6.9 ± 1.6 mm in total translation (P = .002). Both rotational accuracy and translational accuracy were greater for joint components replaced using the ARTEA technique compared with the non-ARTEA technique (P < .05). CONCLUSION: Compared with conventional surgical techniques, ARTEA had greater accuracy in prosthetic implant placement when used to perform TEA.
Assuntos
Artroplastia de Substituição do Cotovelo , Realidade Aumentada , Cotovelo , Humanos , Úmero/diagnóstico por imagem , Úmero/cirurgia , Imageamento TridimensionalRESUMO
Laser remote sensing using a sweep pulse excitation method, in which a laser beam is irradiated at the same repetition frequency as the natural frequency, for enhancing photoacoustic elastic waves through resonance effect has been studied. The sweep pulse excitation method, which is based on the principle of detecting natural frequency fluctuations, such as hammering tests, can detect natural frequencies in the audible sound region with low average laser power and contribute to the convenience and low cost of an installation strength diagnosis of fastening bolts. In this study, we investigated the dynamics of the swept excitation method for optimization by evaluating the dependence of the laser irradiation conditions (pulse width, spot size, and average power) on different metal disc samples. We discovered that the magnitude of the photoacoustic elastic wave is proportional to the absorption of laser power, and the spatiotemporal dynamics can be explained through thermal diffusion phenomena. These findings contribute to the development of laser-sensing technology based on photoacoustic elastic waves.
Assuntos
Lasers , Som , Luz , Análise EspectralRESUMO
A novel exercise modality combined with electrical muscle stimulation (EMS) has been reported to increase cardiovascular and metabolic responses, such as blood lactate concentration. We aimed to examine the effect of constant load pedaling exercise, combined with EMS, by non-invasively and continuously measuring sweat lactate levels. A total of 22 healthy young men (20.7 ± 0.8 years) performed a constant load pedaling exercise for 20 min at 125% of the pre-measured ventilatory work threshold with (EMS condition) and without (control condition) EMS stimulation. Blood lactate concentration was measured by blood samples obtained from the earlobe every minute. Sweat lactate was monitored in real time using a sensor placed on the forearm. The sweat lactate threshold (sLT) was defined as the point of increase in sweat lactate. sLT occurred significantly earlier in the EMS condition than in the control condition. In the single regression analysis, the difference in sLT between the two conditions, as the independent variable, was a significant predictor of the difference in blood lactate concentrations at the end of the exercise (p < 0.05, r = −0.52). Sweat lactate measurement may be a noninvasive and simple alternative to blood lactate measurement to determine the effectiveness of exercise combined with EMS.
Assuntos
Exercício Físico , Suor , Masculino , Humanos , Exercício Físico/fisiologia , Sudorese , Ácido Láctico , Músculo Esquelético/fisiologiaRESUMO
Motion capture systems using skin markers are widely used to evaluate scapular kinematics. However, soft-tissue artifact (STA) is a major limitation, and there is insufficient knowledge of the marker movements from the original locations. This study explores a scapular STA, including marker movements with shoulder elevation using upright computed tomography (CT). Ten healthy males (twenty shoulders in total) had markers attached to scapular bony landmarks and underwent upright CT in the reference and elevated positions. Marker movements were calculated and compared between markers. The bone-based and marker-based scapulothoracic rotation angles were also compared in both positions. The median marker movement distances were 30.4 mm for the acromial angle, 53.1 mm for the root of the scapular spine, and 70.0 mm for the inferior angle. Marker movements were significantly smaller on the superolateral aspect of the scapula, and superior movement was largest in the directional movement. Scapulothoracic rotation angles were significantly smaller in the marker-based rotation angles than in the bone-based rotation angles of the elevated position. We noted that the markers especially did not track the inferior movement of the scapular motion with shoulder elevation, resulting in an underestimation of the marker-based rotation angles.
Assuntos
Movimento , Escápula , Fenômenos Biomecânicos , Humanos , Masculino , Amplitude de Movimento Articular , Rotação , Escápula/diagnóstico por imagem , Ombro/diagnóstico por imagem , Posição OrtostáticaRESUMO
Epidermal wearable sweat biomarker sensing technologies are likely affected by sweat rate because of the dilution effect and limited measurement methods. However, there is a dearth of reports on the local sweat rate (LSR) monitored in real-time during exercise. This explorative study investigated the feasibility of real-time LSR monitoring and clarified LSR kinetics on the forehead and upper arm during constant-load exercise using a perspiration meter with an airflow compensation system. This observational cross-sectional study included 18 recreationally trained males (mean age, 20.6 ± 0.8 years). LSR on the forehead and upper arm (mg/cm2/min) were measured during a constant-load exercise test at 25% of their pre-evaluated peak power until exhaustion. The LSR kinetics had two inflection points, with a gradual decrease in the incremental slope for each section. After the second flexion point, the LSR slope slightly decreased and was maintained until exhaustion. However, the degree of change varied among the participants. Although the ratio of forehead LSR to upper arm LSR tended to decrease gradually over time, there was little change in this ratio after a second flexion point of LSR in both. These findings suggest possible differences in LSR control between the forehead and upper arm during constant-load exercise to prolonged exhaustion.
Assuntos
Suor , Sudorese , Adulto , Exercício Físico , Teste de Esforço , Temperatura Alta , Humanos , Cinética , Masculino , Adulto JovemRESUMO
BACKGROUND: Patellofemoral complications are one of the major issues after total knee arthroplasty (TKA). Excessive patellofemoral joint pressure is associated with complications after TKA surgery, and the amount of patellar osteotomy has a direct effect on patellofemoral joint pressure. The purpose of this study was to evaluate the influence of patella thickness on patellofemoral pressure in TKA. METHODS: Five freshly frozen cadavers were operated with a custom-made Stryker posterior stabilizing type knee joint prosthesis. Patellofemoral joint pressure was measured using a pressure sensor, with the knee joint flexed from 90 to 110 degrees, and with patellar thickness of - 2 mm to + 4 mm. RESULTS: Increasing or decreasing patellar thickness significantly increased or decreased patellofemoral pressure. Regarding knee flexion angle, patellofemoral pressure increased with increasing patellar thickness at all flexion angles, but the pressure increase was greatest at 90 degrees of knee flexion and smallest at 110 degrees. CONCLUSIONS: The amount of patellar osteotomy influences the patellofemoral pressure. Surgeons should avoid increasing patella thickness, since the resulting increased patellofemoral pressure may reduce knee joint function.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Articulação Patelofemoral , Artroplastia do Joelho/efeitos adversos , Fenômenos Biomecânicos , Humanos , Articulação do Joelho/cirurgia , Patela/diagnóstico por imagem , Patela/cirurgia , Articulação Patelofemoral/diagnóstico por imagem , Articulação Patelofemoral/cirurgia , Amplitude de Movimento ArticularRESUMO
BACKGROUND: Standing whole spinal radiographs are used to evaluate spinal alignment in adult spinal deformity (ASD), yet some studies have reported that pelvic incidence, pelvic tilt, and thoracic kyphosis (TK) intra- and inter-observer reliability is low. This study aimed to evaluate the accuracy of spinopelvic parameters through comparing standing whole spinal radiographs and upright CT images. METHODS: We enrolled 26 patients with ASD. All standing whole spinal posterior/anterior and lateral radiographs and upright whole spinal CT had been obtained in a natural standing position. Two examiners independently measured 13 radiographic parameters. Interclass correlation coefficients (ICCs) were used to analyze measurement intra- and inter-observer reliability. Paired t- and Pearson's correlation tests were used to analyze validity of the standing whole spinal radiographs. RESULTS: ICCs of upright CT were excellent in both intra- and inter-observer reliability. However, intra-observer ICCs for TK2-12, TK1-5, TK2-5, and TK5-12 on standing lateral radiographs were relatively low, as were inter-observer ICCs for TK2-12, TK1-5, TK2-5, and TK5-12. Concerning TK values, the difference between the radiographs and CT in TK1-12 and TK2-12 were 4.4 ± 3.1 and 6.6 ± 4.6, respectively, and TK values from T2 showed greater measurement error (p < 0.05). CONCLUSIONS: Upright CT showed excellent intra- and inter-observer reliability in the measurement of spinopelvic parameters. Measurement of TK with T2 on standing whole spinal radiographs resulted in a greater measurement error of up to 6.6°. Surgeons need to consider this when planning surgery and measuring postoperative TK changes in patients with ASD.
Assuntos
Coluna Vertebral , Posição Ortostática , Adulto , Humanos , Radiografia , Reprodutibilidade dos Testes , Coluna Vertebral/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
Evaluation of the initial stability of implants is essential to reduce the number of implant failures of pedicle screws after orthopedic surgeries. Laser resonance frequency analysis (L-RFA) has been recently proposed as a viable diagnostic scheme in this regard. In a previous study, L-RFA was used to demonstrate the diagnosis of implant stability of monoaxial screws with a fixed head. However, polyaxial screws with movable heads are also frequently used in practice. In this paper, we clarify the characteristics of the laser-induced vibrational spectra of polyaxial screws which are required for making L-RFA diagnoses of implant stability. In addition, a novel analysis scheme of a vibrational spectrum using L-RFA based on machine learning is demonstrated and proposed. The proposed machine learning-based diagnosis method demonstrates a highly accurate prediction of implant stability (peak torque) for polyaxial pedicle screws. This achievement will contribute an important analytical method for implant stability diagnosis using L-RFA for implants with moving parts and shapes used in various clinical situations.
Assuntos
Parafusos Pediculares , Lasers , Aprendizado de Máquina , Análise de Frequência de Ressonância , TorqueRESUMO
Although the external knee adduction moment (KAM) during gait was shown to be a quantitative parameter of medial knee osteoarthritis (OA), it requires expensive equipment and a dedicated large space to measure. Therefore, it becomes a major reason to limit KAM measurement in a clinical environment. The purpose of this study was to estimate KAM using a single inertial measurement unit (IMU) during gait in patients with knee OA. A total of 22 medial knee OA patients (44 knee joints) performed conventional gait analysis using three-dimensional (3D) motion capture system. At the same time, we attached commercial IMUs to six body segments (sternum, pelvis, both thighs, and both shanks), and IMU signals during gait were recorded synchronized with the motion capture system. The peak-to-peak difference of acceleration in the lateral/medial axis immediately after heel contact was defined as the thrust acceleration (TA). We hypothesized that TA would represent the lateral thrust of the knee during the stance phase and correlate with the first peak of KAM. The relationship between the peak KAM and TA of pelvis (R = 0.52, p < 0.001), shanks (R = 0.57, p < 0.001) and thighs (R = 0.49, p = 0.001) showed a significant correlation. The root mean square error (RMSE) of linear regression models of pelvis, shanks, and thighs to estimate KAM were 0.082, 0.079, and 0.084 Nm/(kg·m), respectively. Our newly established parameter TA showed a moderate correlation with conventional KAM. The current study confirmed our hypothesis that a single IMU would predict conventional KAM during gait. Since KAM is known as an indicator for prognosis and severity of knee OA, this new parameter has the potential to become an accessible predictor for medial knee OA instead of KAM.
Assuntos
Articulação do Joelho , Osteoartrite do Joelho , Fenômenos Biomecânicos , Feminino , Marcha , Humanos , Joelho , Masculino , Osteoartrite do Joelho/diagnóstico , Caminhada , Dispositivos Eletrônicos VestíveisRESUMO
BACKGROUND: Kinematically aligned total knee arthroplasty (KA-TKA), in which femoral component is placed 3-5° of internal rotation relative to mechanically aligned (MA)-TKA, may have a potential risk of patellofemoral malalignment. This study aimed to assess patellofemoral alignment and compare the data between KA-TKA and MA-TKA, and the relationship with patellofemoral radiographic parameters and patient reported outcomes. METHODS: Among patients who underwent TKA in 2015 and 2016 in our institute, 28 KA-TKAs with a metal-backed patellar component were retrospectively assessed for patellofemoral alignment, and 28 MA-TKAs with a metal-backed patellar component served as controls. A year postoperatively, patellar tilt and shift at 30°, 60°, and 90° knee flexion were measured on Merchant views and compared between the two TKAs. Implant positioning in each patient was assessed based on preoperative CT images and correlations of femoral component positioning with patellar tilt/shift were assessed. RESULTS: Patellar shift at 30° flexion was significantly greater in KA-TKA than in MA-TKA (p = 0.04), whereas patellar tilt angle was comparable between the two TKAs. No statistical correlation was evident between femoral component positioning and patellar shift/tilt, regardless of knee flexion angle in the two TKAs. Knee Society Score 2011 at 1 year follow-up was comparable in all subcategories between the two TKAs. CONCLUSION: Radiographic analysis of KA-TKA revealed lateral shift of the patella at 30° knee flexion at 1 year postoperatively, however patients with patellar shift were asymptomatic. Further long-term observation is required to examine the impact of KA-TKA on the patellofemoral complication.