Efficacy and safety of olaparib, olaparib plus bevacizumab and niraparib maintenance treatment in Japanese patients with platinum-sensitive advanced ovarian cancer.

OBJECTIVE: To investigate whether maintenance treatment could be safely and effectively performed with olaparib, olaparib plus bevacizumab and niraparib in platinum-sensitive advanced ovarian cancer at multiple institutions in Japan. METHODS: We investigated progression-free survival and adverse events in 117 patients with platinum-sensitive advanced ovarian cancer treated with maintenance therapy. RESULTS: The median progression-free survival of 117 patients was 20.1 months. Patients with germline BRCA pathogenic variants had a significantly better prognosis than the other groups (P < 0.001). Furthermore, in the multivariate analysis, stage IV (P = 0.016) and germline BRCA wild-type (P ≤ 0.001) were significantly associated with worse progression-free survival in patients with advanced ovarian cancer. Regarding adverse events, all three types of maintenance treatment were significantly worse than chemotherapy given before maintenance treatment with respect to renal function (olaparib, P = 0.037; olaparib plus bevacizumab, P < 0.001; and niraparib, P = 0.016). CONCLUSION: Maintenance treatment was performed effectively and safely. Renal function deterioration is likely to occur during maintenance treatment, and careful administration is important in platinum-sensitive advanced ovarian cancer.

Clinical outcomes of 34 patients with resistance to thyroid hormone beta: a twenty-year experience in Japan.

Resistance to thyroid hormone beta (RTHß) caused by germline mutations in genes encoding thyroid hormone receptor beta (TRß) is a rare disorder. Little information is available regarding the clinical experience of this syndrome in Japan. We retrospectively reviewed the records of 34 patients with RTHß (21 adult females and 13 adult males) with positive TRß mutations identified at our division between 2000 and 2020. Of the 24 patients with available clinical history, 10 (41.7%) received inappropriate treatments such as antithyroid drugs, thyroidectomy, or radioactive iodine. Diagnostic delay and inappropriate management of RTHß are still present in Japan. Every patient except one demonstrated thyroid hormone profiles indicative of syndrome of inappropriate secretion of thyrotropin (SITSH), characterized by a hormonal profile of hyperthyroxinemia with a non-suppressed TSH concentration. Since the most common forms of hyperthyroidism including Graves' disease feature elevated thyroid hormone levels with suppressed TSH concentrations, early diagnosis of SITSH is critical for preventing inappropriate management. One patient positive for anti-thyroglobulin antibody (Tg-Ab) and anti-thyroperoxidase antibody (TPO-Ab) showed remarkably elevated TSH (>200 µIU/mL) despite thyroid hormone concentrations within the reference ranges. At least one thyroid autoantibody (Tg-Ab, TPO-Ab, or thyrotropin receptor antibodies) was identified in 37.9% (11/29) of the patients tested. One patient developed overt Graves' disease nine years after RTHß diagnosis. These findings suggest that RTHß is frequently comorbid with additional autoimmune thyroid disorders. Further research is required to identify the most appropriate treatments for RTHß patients who develop a second thyroid disorder.

Analgesic Effects of Sokeikakketsuto on Chemotherapy-Induced Mechanical Allodynia and Cold Hyperalgesia in Rats.

The anticancer agents including oxaliplatin, paclitaxel, and bortezomib cause severe peripheral neuropathy. The Kampo medicine Sokeikakketsuto (SOKT) has been widely used to treat several types of pain. In this study, the analgesic effects of SOKT on oxaliplatin-, paclitaxel-, and bortezomib-induced peripheral neuropathy were investigated in rat models. Rats were treated with oxaliplatin (4 mg/kg, intraperitoneally (i.p.), twice a week for four weeks), paclitaxel (4 mg/kg, i.p., twice a week for two weeks), or bortezomib (0.2 mg/kg, i.p., twice a week for two weeks). SOKT (0.3 or 1.0 g/kg) or duloxetine hydrochloride (30 mg/kg, as a positive control) was administered orally after neuropathy developed. Mechanical allodynia and cold hyperalgesia were assessed using the von Frey test and the acetone test, respectively. These tests were performed immediately before and 30, 60, 90, and 120 min after the administration of the drugs. Repeated treatment of oxaliplatin induced mechanical allodynia and cold hyperalgesia. A single administration of SOKT (1 g/kg, per os (p.o.)), as well as duloxetine, temporarily reversed both the mechanical allodynia and the cold hyperalgesia. Repeated administration of paclitaxel and bortezomib also induced the mechanical allodynia. SOKT and duloxetine reversed the mechanical allodynia caused by bortezomib, but not by paclitaxel. SOKT might have the potential to become a new drug to relieve the symptom of oxaliplatin- or bortezomib-induced peripheral neuropathy.

Impairment of the Hypothalamus-Pituitary-Thyroid Axis Caused by Naturally Occurring GATA2 Mutations In Vitro.

The transcription factor GATA2 regulates gene expression in several cells and tissues, including hematopoietic tissues and the central nervous system. Recent studies revealed that loss-of-function mutations in GATA2 are associated with hematological disorders. Our earlier in vitro studies showed that GATA2 plays an essential role in the hypothalamus-pituitary-thyroid axis (HPT axis) by regulating the genes encoding prepro-thyrotropin-releasing hormone (preproTRH) and thyroid-stimulating hormone ß (TSHß). However, the effect of GATA2 mutants on the transcriptional activity of their promoters remains unelucidated. In this study, we created five human GATA2 mutations (R308P, T354M, R396Q, R398W, and S447R) that were reported to be associated with hematological disorders and analyzed their functional properties, including transactivation potential and DNA-binding capacity toward the preproTRH and the TSHß promoters. Three mutations (T354M, R396Q, and R398W) within the C-terminal zinc-finger domain reduced the basal GATA2 transcriptional activity on both the preproTRH and the TSHß promoters with a significant loss of DNA binding affinity. Interestingly, only the R398W mutation reduced the GATA2 protein expression. Subsequent analysis demonstrated that the R398W mutation possibly facilitated the GATA2 degradation process. R308P and S447R mutants exhibited decreased transcriptional activity under protein kinase C compared to the wild-type protein. In conclusion, we demonstrated that naturally occurring GATA2 mutations impair the HPT axis through differential functional mechanisms in vitro.

Does an In-House Computer-Aided Design/Computer-Aided Manufacturing Approach Contribute to Accuracy and Time Shortening in Mandibular Reconstruction?

Mandibular reconstruction using computer-aided design and computer-assisted manufacturing (CAD/CAM) techniques has received recent attention. This technique has theoretical advantages, although this approach can be commercially used in the limited area of the world.The aim is to describe our experience using in-house CAD/CAM guides and the situations in which CAD/CAM may present benefit in the region where commercial guides are unavailable.The authors developed our In-house CAD/CAM approach for mandibular reconstructions with a free fibular flap. Patients were divided into 2 group; CAD/CAM and conventional groups. In the CAD/CAM group, reconstructions were planned virtually using CAD/CAM; these CAD/CAM guides were used in the surgery. In the conventional group, free-hand cutting and fitting of the fibular segments were performed as reconstructions. Later, the bone computed tomographic image was compared with the plan. The averaged deviations and the percentages of the points within 1 mm, 2 mm, and 3 mm deviations were recorded. Total and ischemic time were also recorded.Reconstruction points within 1 mm deviation were 59% of CAD/CAM group (n = 9) and 42% of conventional group (n = 10, P = 0.04), within 2 mm 82% and 69% (P = 0.03). Total time were 1012 and 911 minutes, while flap ischemic time were 147 and 175 minutes (P = 0.03), respectively.In-house CAD/CAM mandibular reconstruction also supported accuracy and shorter flap ischemic time. For a detailed accurate reconstruction, CAD/CAM showed superiority than conventional method. Use of the In-house CAD/CAM guides might be an option where commercial guides are not available.

[Coexistence of IgG4-related autoimmune hepatitis and inflammatory pseudotumors of the liver:a case report].

IgG4-related autoimmune hepatitis (IgG4-AIH) is characterized by hepatic inflammation and is considered an IgG4-related disease. Several inflammatory pseudotumors (IPTs) are also considered as IgG4-related diseases;however, there have been no reports of cases wherein both diseases occurred concurrently. An older adult with liver dysfunction was admitted to the hospital and was diagnosed with IgG4-AIH following a liver biopsy;IgG4-positive plasma cell infiltration in the portal tract and high serum IgG4 concentration were detected. A few months following biopsy, imaging studies revealed two IPTs in the liver. The patient was diagnosed with cryptogenic organized pneumonia several months after imaging and was treated with steroids in a different hospital. Her liver dysfunction improved, and one of the two IPTs disappeared in response to steroid treatment. The following is an account of a rare case of IgG4-AIH with IPTs of the liver.

In vitro spermatogenesis in two-dimensionally spread mouse testis tissues.

PURPOSE: Mouse in vitro spermatogenesis is possible with classical organ culture methods, by placing the testis tissue at the interphase between culture medium and air. In this condition, however, a tissue piece tends to round up to be compact, whose central region suffers from shortage of nutrients and oxygen. In this study, the authors improved the culture condition by spreading each tissue thin and flat, by which they were able to get better access to the oxygen and nutrients. METHODS: Immature mouse testis tissues placed on agarose gel block were forced to spread flat by covering with a polydimethylsiloxane (PDMS) ceiling chip (PC chip). They were then cultured for weeks and evaluated by the transgene expression of Acr-Gfp, which reflects the progression of spermatogenesis. RESULTS: Testis tissues covered with PC chip initiated and maintained spermatogenesis in its wider region than those without PC chip covering. Flow cytometric analysis demonstrated that the PC method yielded more numerous meiotic germ cells than those without PC. Immunohistochemical examination confirmed the authentic histological figure of spermatogenesis from spermatogonia up to round or elongating spermatids. CONCLUSIONS: The PC chip method is simple and effective to improve the efficiency of in vitro spermatogenesis in the organ culture system.

A monolayer microfluidic device supporting mouse spermatogenesis with improved visibility.

In our previous study, we produced a microfluidic device (MFD) which successfully maintained spermatogenesis for over 6 months in mouse testis tissues loaded in the device. In the present study, we developed a new MFD, a monolayer device (ML-D) with a barrier structure consisting of pillars and slits, which is simpler in design and easier to make. This ML-D was also effective for inducing mouse spermatogenesis and maintained it for a longer period than the conventional culture method. In addition, we devised a way of introducing sample tissue into the device during its production, just before bonding the upper layer of polydimethylsiloxane (PDMS) and bottom glass slide. The tissue can obtain nutrients horizontally from the medium running beside it and oxygen vertically from above through PDMS. In addition, the glass slide set at the bottom improved the visibility of the sample tissue with an inverted microscope. When we took photos of cultured tissue of the Acr-Gfp transgenic mouse testis in ML-D sequentially every day, morphological changes of the acrosome during spermiogenesis were successfully recorded. The ML-D is simple in design and useful for culturing testis tissue for inducing and maintaining spermatogenesis with clearer visibility. Due to the new method of sample loading, tissues other than testis should also be applicable.

Neonatal testis growth recreated in vitro by two-dimensional organ spreading.

Organ culture experiments can be hampered by central degeneration or necrosis due to the inadequate permeation of oxygen and nutrients, which deteriorates the function and growth of cultured tissues. In the current study, we aimed to overcome this limitation of organ culture through spreading the tissue two dimensionally on an agarose gel stand and molding into a disc shape by placing a ceiling of polydimethylsiloxane (PDMS) chip, which is highly oxygen permeable. By this, every part of the tissue can receive a sufficient supply of oxygen through PDMS as well as nutrients through the agarose gel below. This method not only prevented central necrosis of tissues, but also supported the tissue growth over time. In addition, such growth, as volume enlargement, could be easily measured. Under these conditions, we examined the effect of several factors on the growth of neonatal mouse testis, and found that follicle stimulating hormone (FSH) and insulin significantly promoted the growth. These results are in good agreement with previous in vivo reports. Notably, the growth achieved over 7 days in our in vitro system is almost comparable to, about 80% of, that observed in vivo. Thus, we successfully monitored the promotion of tissue growth beyond the limits of the conventional organ culture method. This extremely simple method could offer a unique platform to evaluate the growth as well as functional properties of organs, not only the testis but also others as well.

Using an In-House Approach to Computer-Assisted Design and Computer-Aided Manufacturing Reconstruction of the Maxilla.

PURPOSE: Computer-assisted design (CAD) and computer-aided manufacturing (CAM) techniques are in widespread use for maxillofacial reconstruction. However, CAD/CAM surgical guides are commercially available only in limited areas. To use this technology in areas where these commercial guides are not available, the authors developed a CAD/CAM technique in which all processes are performed by the surgeon (in-house approach). The authors describe their experience and the characteristics of their in-house CAD/CAM reconstruction of the maxilla. PATIENTS AND METHODS: This was a retrospective study of maxillary reconstruction with a free osteocutaneous flap. Free CAD software was used for virtual surgery and to design the cutting guides (maxilla and fibula), which were printed by a 3-dimensional printer. After the model surgery and pre-bending of the titanium plates, the actual reconstructions were performed. The authors compared the clinical information, preoperative plan, and postoperative reconstruction data. The reconstruction was judged as accurate if more than 80% of the reconstructed points were within a deviation of 2 mm. RESULTS: Although on-site adjustment was necessary in particular cases, all 4 reconstructions were judged as accurate. In total, 3 days were needed before the surgery for planning, printing, and pre-bending of plates. The average ischemic time was 134 minutes (flap suturing and bone fixation, 70 minutes; vascular anastomoses, 64 minutes). The mean deviation after reconstruction was 0.44 mm (standard deviation, 0.97). The deviations were 67.8% for 1 mm, 93.8% for 2 mm, and 98.6% for 3 mm. The disadvantages of the regular use of CAD/CAM reconstruction are the intraoperative changes in defect size and local tissue scarring. CONCLUSION: Good accuracy was obtained for CAD/CAM-guided reconstructions based on an in-house approach. The theoretical advantage of computer simulation contributes to the accuracy. An in-house approach could be an option for maxillary reconstruction.

Secondary Maxillary and Orbital Floor Reconstruction With a Free Scapular Flap Using Cutting and Fixation Guides Created by Computer-Aided Design/Computer-Aided Manufacturing.

Computer-aided design/computer-aided manufacturing (CAD/CAM) guides are now widely used in maxillofacial reconstruction. However, there are few reports of CAD/CAM guides being used for scapular flaps. The authors performed the secondary maxillary and orbital floor reconstruction using a free latissimus dorsi muscle, cutaneous tissue, and scapular flap designed using CAD/CAM techniques in a 72-year-old man who had undergone partial maxillectomy four years previously. The patient had diplopia, the vertical dystopia of eye position, and a large oral-nasal-cutaneous fistula. After the operation, the authors confirmed that the deviation between the postoperative and preoperative planning three-dimensional images was less than 2 mm. Because scapular guides require 3 cutting surfaces, the shape of the scapular guide is more complex than that of a conventional fibular guide. In orbital floor reconstruction, the use of a CAM technique such as that used to manufacture the authors' fixation guide is as necessary for accurate, safe, and easy reconstruction as is preoperative CAD planning. The production of a fixation guide as well as a cutting guide is particularly useful because it is difficult to determine the angle for reconstructing the orbital floor by freehand techniques. In this case, the orbital floor was reconstructed based on a mirror image of the healthy side to avoid overcompression of the orbital tissue. Although the patient's vertical dystopia of eye position was improved, diplopia was not improved because, for greater safety, the authors did not plan overcorrection of the orbital volume.

Involvement of the rabies virus phosphoprotein gene in neuroinvasiveness.

Rabies virus (RABV), which is transmitted via a bite wound caused by a rabid animal, infects peripheral nerves and then spreads to the central nervous system (CNS) before causing severe neurological symptoms and death in the infected individual. Despite the importance of this ability of the virus to spread from a peripheral site to the CNS (neuroinvasiveness) in the pathogenesis of rabies, little is known about the mechanism underlying the neuroinvasiveness of RABV. In this study, to obtain insights into the mechanism, we conducted comparative analysis of two fixed RABV strains, Nishigahara and the derivative strain Ni-CE, which cause lethal and asymptomatic infections, respectively, in mice after intramuscular inoculation. Examination of a series of chimeric viruses harboring the respective genes from Nishigahara in the genetic background of Ni-CE revealed that the Nishigahara phosphoprotein (P) gene plays a major role in the neuroinvasiveness by mediating infection of peripheral nerves. The results obtained from both in vivo and in vitro experiments strongly suggested that the Nishigahara P gene, but not the Ni-CE P gene, is important for stable viral replication in muscle cells. Further investigation based on the previous finding that RABV phosphoprotein counteracts the host interferon (IFN) system demonstrated that the Nishigahara P gene, but not the Ni-CE P gene, functions to suppress expression of the beta interferon (IFN-ß) gene (Ifn-ß) and IFN-stimulated genes in muscle cells. In conclusion, we provide the first data strongly suggesting that RABV phosphoprotein assists viral replication in muscle cells by counteracting the host IFN system and, consequently, enhances infection of peripheral nerves.

Differential combined effect of COX inhibitors on cell survival suppressed by sorafenib in the HepG2 cell line.

Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related deaths worldwide. Sorafenib, a molecular-targeted drug, is a multi-target oral anti-neoplastic drug that is used as a first-line treatment for patients with advanced Human HCC. An increase in the expression of the cyclooxygenase-2 (COX-2) protein and sequential production of prostaglandin (PG) E2 were previously shown to significantly enhance carcinogenesis. Although the synergistic and/or additive effects of various COX inhibitors have been demonstrated in HCC, those of a combination of sorafenib and COX inhibitors remain unclear. The aim of the present study was to examine the antitumor effects of a combination of sorafenib and COX inhibitors on HCC HepG2 cells. Various COX inhibitors suppressed HepG2 cell survival, and exhibited a combined effect with sorafenib. However, COX-2 selectivity had little relevance. The co-administration of COX inhibitors and sorafenib increased the frequency of apoptosis. Moreover, the combination of sorafenib and diclofenac significantly increased Bax protein expression levels. The results of the present study indicate that COX inhibitors can be administered in combination with sorafenib for HCC therapy.

Standalone cell culture microfluidic device-based microphysiological system for automated cell observation and application in nephrotoxicity tests.

Microphysiological systems (MPS) offer an alternative method for culturing cells on microfluidic platforms to model organ functions in pharmaceutical and medical sciences. Although MPS hardware has been proposed to maintain physiological organ function through perfusion culture, no existing MPS can automatically assess cell morphology and conditions online to observe cellular dynamics in detail. Thus, with this study, we aimed to establish a practical strategy for automating cell observation and improving cell evaluation functions with low temporal resolution and throughput in MPS experiments. We developed a versatile standalone cell culture microfluidic device (SCCMD) that integrates microfluidic chips and their peripherals. This device is compliant with the ANSI/SLAS standards and has been seamlessly integrated into an existing automatic cell imaging system. This integration enables automatic cell observation with high temporal resolution in MPS experiments. Perfusion culture of human kidney proximal tubule epithelial cells using the SCCMD improves cell function. By combining the proximal tubule MPS with an existing cell imaging system, nephrotoxicity studies were successfully performed to automate morphological and material permeability evaluation. We believe that the concept of building the ANSI/SLAS-compliant-sized MPS device proposed herein and integrating it into an existing automatic cell imaging system for the online measurement of detailed cell dynamics information and improvement of throughput by automating observation operations is a novel potential research direction for MPS research.

Niraparib in Japanese patients with heavily pretreated, homologous recombination-deficient ovarian cancer: final results of a multicenter phase 2 study.

OBJECTIVE: To evaluate the long-term efficacy and safety of niraparib in Japanese women with heavily pretreated ovarian cancer. METHODS: This was the follow-up analysis of a phase 2, multicenter, open-label, single-arm study in Japanese women with homologous recombination-deficient, platinum-sensitive, relapsed, high-grade serous epithelial ovarian, fallopian tube, or primary peritoneal cancer who had completed 3-4 lines of chemotherapy and were poly(ADP-ribose) polymerase inhibitor naïve. Participants received niraparib (starting dose, 300 mg) once daily in continuous 28-day cycles until objective disease progression, unacceptable toxicity, or consent withdrawal. The primary endpoint was confirmed objective response rate (ORR), as assessed using Response Evaluation Criteria in Solid Tumors version 1.1. Safety evaluations included treatment-emergent adverse events (TEAEs). RESULTS: 20 patients were enrolled in the study and included in both efficacy and safety analyses. Median total study duration was 759.5 days. Median dose intensity was 201.3 mg/day. Confirmed ORR was 60.0% (90% confidence interval [CI]=39.4-78.3); 2 patients had complete response and 10 patients had partial response. Median duration of response was 9.9 months (95% CI=3.9-26.9) and the disease control rate was 90.0% (95% CI=68.3-98.8). The most common TEAEs were anemia (n=15), nausea (n=12), and decreased platelet count (n=11). TEAEs leading to study drug dose reduction, interruption, or discontinuation were reported in 16 (80.0%), 15 (75.0%), and 2 patients (10.0%), respectively. CONCLUSION: The long-term efficacy and safety profile of niraparib was consistent with previous findings in the equivalent population in non-Japanese patients. No new safety signals were identified. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03759600.

A survey of carboplatin desensitization therapy in Japan: A multicenter retrospective study.

INTRODUCTION: Hypersensitivity reactions (HSRs) to chemotherapy are serious adverse events associated with cancer drug therapy and can occur with any antitumor drug. This study investigated the safety and efficacy of carboplatin desensitization therapy in Japan and established a method for treating carboplatin HSRs. METHODS: Patients diagnosed with gynecological (ovarian, endometrial, or cervical) cancers who underwent carboplatin desensitization therapy between 2016 and 2020 at the Gynecologic Cancer Study Group of Japan Clinical Oncology Group were included. The carboplatin desensitization therapy at each institution and the implementation cases were registered in an online case report form. RESULTS: This retrospective study enrolled 136 patients (ovarian, 108; endometrial, 17; and cervical cancer, 11). Pre-existing allergies were present in 37 (27.2%) patients, and 32 (23.5%) patients exhibited prodromal symptoms during treatment before HSR onset. Erythema was the most common symptom at HSR onset, affecting 93 (68.4%) patients, followed by itching in 72 (52.9%) patients and decreased oxygen saturation in 43 (31.6%) patients. Loss of consciousness occurred in three (2.2%) patients. The most common timing of HSR onset was during the first recurrence treatment (47%). The mean total carboplatin dose until HSR onset was 7331 (2620-18,282) mg, and the mean number of doses was 14 (4-63). Desensitization treatment was completed in 75% of cases, and breakthrough HSRs occurred in 25% (34/136). No deaths occurred in the study cohort. The risk factors for HSRs were not identified. CONCLUSION: Although carboplatin desensitization therapy has high success rates in Japan, erythema and pruritus are important HSRs to consider.

Pyometra and Pyogenic Spondylitis with Suspected Involvement of Diverticulitis of the Sigmoid Colon.

Pyometra is a rare disease in which pus accumulates in the uterus and is typically caused by stenosis of the cervix. Only a few case reports have indicated that diverticular disease causes pyometra. We herein report an 83-year-old woman presented to our hospital with a fever, loss of appetite, general fatigue and back pain. After some inspections, she was diagnosed with pyometra and lumbar pyogenic spondylitis secondary to diverticulitis of the sigmoid colon. We performed transvaginal drainage and continued antibiotic administration for about three months. The pyometra and pyogenic spondylitis successfully resolved, and she did not experience any recurrence.

Culture-space control is effective in promoting haploid cell formation and spermiogenesis in vitro in neonatal mice.

The classical organ culture method, in which tissue is placed at the gas‒liquid interphase, is effective at inducing mouse spermatogenesis. However, due to reginal variations in the supply of oxygen and nutrients within a tissue, the progress of spermatogenesis was observed only in limited areas of a tissue. In addition, haploid cell formation and its differentiation to spermatozoon, i.e. spermiogenesis, were infrequent and inefficient. Here, we show that the polydimethylsiloxane (PDMS)-chip ceiling (PC) method, which ensures a uniform supply of nutrients and oxygen throughout the tissue by pressing it into a thin, flat shape, can provide control over the culture space. We used this method to culture testis tissue from neonatal mice, aged 1 to 4 days, and found that modulating the culture space during the experiment by replacing one chip with another that had a higher ceiling effectively increased tissue growth. This adjustment also induced more efficient spermatogenesis, with the process of spermiogenesis being particularly promoted. Meiotic cells were observed from culture day 14 onward, and haploid cells were confirmed at the end of each experiment. This technique was also shown to be a sensitive assay for testicular toxicity. Culture-space control will be a critical regulation parameter for sophisticated tissue culture experiments.

In vitro spermatogenesis in isolated seminiferous tubules of immature mice.

Mouse spermatogenesis, from spermatogonial stem cell proliferation to sperm formation, can be reproduced in vitro by culturing testis tissue masses of neonatal mice. However, it remains to be determined whether this method is also applicable when testis tissues are further divided into tiny fragments, such as segments of the seminiferous tubule (ST), a minimal anatomical unit for spermatogenesis. In this study, we investigated this issue using the testis of an Acrosin-GFP/Histone H3.3-mCherry (Acr/H3) double-transgenic mouse and monitored the expression of GFP and mCherry as indicators of spermatogenic progression. Initially, we noticed that the cut and isolated stretches of ST shrunk rapidly and conglomerated. We therefore maintained the isolation of STs in two ways: segmental isolation without truncation or embedding in soft agarose. In both cases, GFP expression was observed by fluorescence microscopy. By whole-mount immunochemical staining, meiotic spermatocytes and round and elongating spermatids were identified as Sycp3-, crescent-form GFP-, and mCherry-positive cells, respectively. Although the efficiency was significantly lower than that with tissue mass culture, we clearly showed that spermatogenesis can be induced up to the elongating spermatid stage even when the STs were cut into short segments and cultured in isolation. In addition, we demonstrated that lowered oxygen tension was favorable for spermatogenesis both for meiotic progression and for producing elongating spermatids in isolated STs. Culturing isolated STs rather than tissue masses is advantageous for explicitly assessing the various environmental parameters that influence the progression of spermatogenesis.