Mechanical Tuning of Aggregated States for Conformation Control of Cyclized Binaphthyl at the Air-Water Interface.

An air-water interface enables molecular assemblies and conformations to be controlled according to their intrinsic interactions and anisotropic stimuli. The chirality and conformation of binaphthyl derivatives have been controlled by tuning molecular aggregated states in solution. In this study, we have tuned molecular aggregated states of monobinaphthyldurene (MBD) by applying different mechanical stimuli to control the conformation at the air-water interface. Density functional theory calculations indicate that MBD exists essentially in two conformations, namely, 1-MBD (most stable) and 2-MBD (less stable). MBD was mechanically dissolved in appropriate lipid matrices using the Langmuir-Blodgett (LB) method, while pure MBD was self-assembled at the dynamic air-water interface in the absence of or by applying vortex motions (vortex LB method). In MBD mixed monolayer, surface pressure-molecular area measurements and atomic force microscopy observations suggest that separate lipids and MBD phases transform to mixed phases induced by the dissolution of MBD into the lipid matrices during mechanical compression at the air-water interface. Circular dichroism measurements indicate that molecular conformation changes from 1-MBD to 2-MBD in passing from a separated phase to a mixed MBD/lipid phase. In addition, the molecular aggregated states and conformations of MBD depend on the spreading volume and vortex flow rate when applying the vortex LB method. Molecular conformations and aggregated states of MBD could be controlled continuously by applying a mechanical stimulus at the air-water interface.

Discrete π Stack of a Tweezer-Shaped Naphthalenediimide-Anthracene Conjugate.

The design and synthesis of a tweezer-shaped naphthalenediimide (NDI)-anthracene conjugate (2NDI) are reported. In the structure of the closed form (πNDI ⋅⋅⋅πNDI stack) of 2NDI, which was elucidated by single-crystal XRD, the existence of C-H⋅⋅⋅O hydrogen bonding involving the nearest carbonyl oxygen atom of an NDI unit was suggested. The tunability of πNDI ⋅⋅⋅πNDI interactions was studied by means of UV/Vis absorption, fluorescence and NMR spectroscopy and molecular modelling. This revealed that the πNDI ⋅⋅⋅πNDI interactions in 2NDI affect the absorption and emission properties depending on the temperature. Furthermore, in polar solvents, 2NDI prefers the stronger πNDI ⋅⋅⋅πNDI stack, whereas the πNDI ⋅⋅⋅πNDI interaction is diminished in nonpolar solvents. Importantly, the conformational variations of 2NDI can be reversibly switched by variation in temperature, and this suggests potential application for fluorogenic molecular switches upon temperature changes.

Molecular rotors confined at an ordered 2D interface.

Intramolecular rotation of molecules contained in a two-dimensional monolayer or a three-dimensional collapsed film at an air-water interface was investigated by in situ fluorescence spectroscopy of twisted intramolecular charge transfer (TICT) type 9-(2-carboxy-2-cyanovinyl)julolidine (CCVJ) derivatives. The TICT type molecules, CCVJ-C12 and CCVJ-Chol, that contain a linear alkyl dodecyl chain or a cholesteryl group, respectively, as their hydrophobic group, were designed and synthesized to manipulate them at the air-water interface. These lipophilized molecular rotors showed the general properties of TICT molecules in solutions that the fluorescence intensity increases with increasing viscosity of the solvent, which is induced by inhibition of internal molecular rotations. The molecular rotors CCVJ-C12 and CCVJ-Chol formed monolayers at the air-water interface and in situ fluorescence spectroscopy was performed during the in-plane compression of the monolayers. It was revealed that the monomer emissions were suppressed and only after the collapse of monolayers, excimer emission from both layers consisting of CCVJ-C12 or CCVJ-Chol was observed. Suppressed monomer emission from monolayers suggests that intramolecular rotation is not inhibited in dense ordered monolayers. Furthermore, fluorescence spectroscopy of Langmuir-Blodgett (LB) films indicated that molecular rotations are not inhibited in the monolayer transferred on the solid substrates.

Mechanically Induced Opening-Closing Action of Binaphthyl Molecular Pliers: Digital Phase Transition versus Continuous Conformational Change.

Reversible dynamic control of structure is a significant challenge in molecular nanotechnology. Previously, we have reported a mechanically induced continuous (analog) conformational variation in an amphiphilic binaphthyl, where closing of molecular pliers was achieved by compression of a molecular monolayer composed of these molecules at the air-water interface. In this work we report that a phase transition induced by an applied mechanical stress enables discontinuous digital (1/0) opening of simple binaphthyl molecular pliers. A lipid matrix at the air-water interface promotes the formation of quasi-stable nanocrystals, in which binaphthyl molecules have an open transoid configuration. The crystallization/dissolution of quasi-stable binaphthyl crystals with accompanying conformational change is reversible and repeatable.

Solid surface vs. liquid surface: nanoarchitectonics, molecular machines, and DNA origami.

The investigation of molecules and materials at interfaces is critical for the accumulation of new scientific insights and technological advances in the chemical and physical sciences. Immobilization on solid surfaces permits the investigation of different properties of functional molecules or materials with high sensitivity and high spatial resolution. Liquid surfaces also present important media for physicochemical innovation and insight based on their great flexibility and dynamicity, rapid diffusion of molecular components for mixing and rearrangements, as well as drastic spatial variation in the prevailing dielectric environment. Therefore, a comparative discussion of the relative merits of the properties of materials when positioned at solid or liquid surfaces would be informative regarding present-to-future developments of surface-based technologies. In this perspective article, recent research examples of nanoarchitectonics, molecular machines, DNA nanotechnology, and DNA origami are compared with respect to the type of surface used, i.e. solid surfaces vs. liquid surfaces, for future perspectives of interfacial physics and chemistry.

Supramolecular 1-D polymerization of DNA origami through a dynamic process at the 2-dimensionally confined air-water interface.

In this study, a Langmuir-Blodgett (LB) system has been utilized for the regulation of polymerization of a DNA origami structure at the air-water interface as a two-dimensionally confined medium, which enables dynamic condensation of DNA origami units through variation of the film area at the macroscopic level (ca. 10-100 cm(2)). DNA origami sheets were conjugated with a cationic lipid (dioctadecyldimethylammonium bromide, 2C18N(+)) by electrostatic interaction and the corresponding LB-film was prepared. By applying dynamic pressure variation through compression-expansion processes, the lipid-modified DNA origami sheets underwent anisotropic polymerization forming a one-dimensionally assembled belt-shaped structure of a high aspect ratio although the thickness of the polymerized DNA origami was maintained at the unimolecular level. This approach opens up a new field of mechanical induction of the self-assembly of DNA origami structures.

Gene transfer on inorganic/organic hybrid silica nanosheets.

Gene delivery is often accomplished by the forward or reverse transfection protocol. In either protocol, a transfection reagent (usually cationic) is added to increase the delivery efficiency. In this study, we employed a series of nanosheet networks to facilitate the delivery of naked plasmid DNA into human mesenchymal stem cells (hMSCs). By adding different chemicals into the reaction mixture for etching the silica glass, we were able to fabricate inorganic/organic hybrid nanosheet networks with different physico-chemical characteristics. We then analyzed the transfection efficiency on different nanosheets and the possible dependence of the transfection efficiency on the physico-chemical parameters of nanosheets. The results showed that all nanosheet networks were noncytotoxic and demonstrated a high cell survival rate (∼90%) after transfection. The transfection efficiency was critically determined by the aspect ratio (height/thickness of the wall) of the nanosheets. The effects of chemistry or other surface properties were not significant. Moreover, the transfection efficiency may be successfully predicted by the initial cell migration rate and the activation of integrin ß3 on the nanosheets. Compared to the conventional method, transfection using concurrent cell/plasmid seeding on the nanosheets is not only more effective but also much safer. Future efforts may focus on combining the inorganic/organic hybrid nanosheets with soft substrates for in situ transfection.

In situ 2D-extraction of DNA wheels by 3D through-solution transport.

Controlled transfer of DNA nanowheels from a hydrophilic to a hydrophobic surface was achieved by complexation of the nanowheels with a cationic lipid (2C12N(+)). 2D surface-assisted extraction, '2D-extraction', enabled structure-persistent transfer of DNA wheels, which could not be achieved by simple drop-casting.

Mechanochemical Tuning of the Binaphthyl Conformation at the Air-Water Interface.

Gradual and reversible tuning of the torsion angle of an amphiphilic chiral binaphthyl, from -90° to -80°, was achieved by application of a mechanical force to its molecular monolayer at the air-water interface. This 2D interface was an ideal location for mechanochemistry for molecular tuning and its experimental and theoretical analysis, since this lowered dimension enables high orientation of molecules and large variation in the area. A small mechanical energy (<1 kcal mol(-1) ) was applied to the monolayer, causing a large variation (>50 %) in the area of the monolayer and modification of binaphthyl conformation. Single-molecule simulations revealed that mechanical energy was converted proportionally to torsional energy. Molecular dynamics simulations of the monolayer indicated that the global average torsion angle of a monolayer was gradually shifted.

In vivo gene delivery by cationic tetraamino fullerene.

Application of nanotechnology to medical biology has brought remarkable success. Water-soluble fullerenes are molecules with great potential for biological use because they can endow unique characteristics of amphipathic property and form a self-assembled structure by chemical modification. Effective gene delivery in vitro with tetra(piperazino)fullerene epoxide (TPFE) and its superiority to Lipofectin have been described in a previous report. For this study, we evaluated the efficacy of in vivo gene delivery by TPFE. Delivery of enhanced green fluorescent protein gene (EGFP) by TPFE on pregnant female ICR mice showed distinct organ selectivity compared with Lipofectin; moreover, higher gene expression by TPFE was found in liver and spleen, but not in the lung. No acute toxicity of TPFE was found for the liver and kidney, although Lipofectin significantly increased liver enzymes and blood urea nitrogen. In fetal tissues, neither TPFE nor Lipofectin induced EGFP gene expression. Delivery of insulin 2 gene to female C57/BL6 mice increased plasma insulin levels and reduced blood glucose concentrations, indicating the potential of TPFE-based gene delivery for clinical application. In conclusion, this study demonstrated effective gene delivery in vivo for the first time using a water-soluble fullerene.

Synthesis of amphiphilic chiral salen complexes and their conformational manipulation at the air-water interface.

A series of amphiphilic salen complexes, [L1a,bM] and [L2a,bM], were designed and synthesized. These complexes consist of two or four hydrophilic triethylene glycol (TEG) chains and a hydrophobic π-extended metallosalen core based on naphthalene or phenanthrene. The obtained amphiphilic complexes, [L1bM] (M = Ni, Cu, Zn), formed a monolayer at the air-water interface, while the monocationic [L1bCo(MeNH2)2](OTf) did not form a well-defined monolayer. The number of hydrophilic TEG chains also had an influence on the monolayerformation behavior; the tetra-TEG derivatives, [L1bNi] and [L2bNi], showed a pressure rise at a less compressed region than the bis-TEG derivatives, [L1aNi] and [L2aNi]. In addition, the investigation of their compressibility and compression modulus suggested that the tetra-TEG derivatives, [L1bNi] and [L2bNi], are more flexible than the corresponding bis-TEG analogues, [L1aNi] and [L2aNi], and that the phenanthrene derivatives [L1a,bNi] were more rigid than the corresponding naphthalene analogues, [L2a,bNi]. The Langmuir-Blodgett (LB) films of one of the complexes, [L1bNi], showed CD spectra slightly different from that in solution, which may originate from the unique anisotropic environment of the air-water interface. Thus, we demonstrated the possibility of controlling the chiroptical properties of metal complexes by mechanical compression.

2,11-Dibromo-5,8-dibut-yl[4]helicene.

A racemic mixture of the title compound, C(26)H(26)Br(2), a brominated [4]helicene, crystallizes, forming columns of stacked mol-ecules. There are two crystallographically unique mol-ecules in the asymmetric unit, both with the same helical handedness. As is typical with helicene congeners, the unique mol-ecules show short inter-atomic contacts between H atoms at the fjord region, with H⋯H distances of 1.87 and 1.94 Å. Mol-ecules with the same helical handedness segregate in the crystal packing, forming homochiral columns. The stacked mol-ecules are piled in a column with alternate orientations. The shortest C⋯C distance in the stacked mol-ecules is 3.306 (4) Å.

Oxidation-degree-dependent moisture-induced actuation of a graphene oxide film.

Multilayered films prepared from graphene oxide (GO) subjected to a single oxidation process (1GO) can actuate in response to moisture, whereas those prepared from GO subjected to two oxidation processes (2GO) lose this ability. To elucidate the origin of this difference, the structures and properties of various multilayered films and their contents were analyzed. According to atomic force microscopy images, the lateral size of the GO monolayer in 2GO (2.0 ± 0.4 µm) was smaller than that in 1GO (3.2 ± 0.4 µm), although this size difference did not affect actuation. Scanning electron microscopy images of the cross sections of both films showed fine multilayered structures and X-ray diffraction measurements showed the moisture sensitive reversible change in the interlayer distances for both films. Both films adsorbed 30 wt% moisture in 60 s with different water contents at the bottom moist sides and top air sides of the films. Nanoindentation experiments showed hardness values (1GO: 156 ± 67 MPa; 2GO: 189 ± 97 MPa) and elastic modulus values (1GO: 4.7 ± 1.7 GPa; 2GO: 5.8 ± 3.2 GPa) typical of GO, with no substantial difference between the films. On the contrary, the 1GO film bent when subjected to a weight equal to its own weight, whereas the 2GO film did not. Such differences in the macroscopic hardness of GO films can affect their moisture-induced actuation ability.

[6]Cyclo-2,7-naphthyl-ene: a redetermination.

Single crystals of a macrocyclic hydro-carbon, [6]cyclo-2,7-naphthyl-ene ([6]CNAP, C(60)H(36)) were prepared from anthracene melt with a prolonged time for the recrystallization. The crystal of improved quality led to the correction of the space-group assignment to Cmca from [Formula: see text] in the original determination [Nakanishi et al. (2011 ▶) Angew. Chem. Int. Ed.50, 5323-5326] and the refinement of anisotropic displacement parameters of all C atoms. The refined mol-ecular structure with C(2h) point symmetry indicated that the strain on the naphthyl rings of [6]CNAP is smallest among the congeners. Despite the large macrocyclic structure, mol-ecules are packed in a ubiquitous herringbone motif. A short C-C distance of 3.119 (4) Šwas found in the stacking direction, and a short C-H distance of 2.80 Šwas found in the inter-columnar contact.

Complexability of o-bisguanidinobenzenes with arsenic and phosphoric acids in solution and solid states, and the potential use of their immobilized derivatives as solid base ligands for metal salts and arsenic acid.

The role of o-bisguanidinobenzenes (BGBs) as new Brønsted base ligands for arsenic and phosphoric acids was examined. In solution state, complexation was evaluated by Job's plot in (1)H NMR experiment, indicating a 1:1 complex formation, whereas in solid state crystalline structures of complexes obtained were addressed by X-ray crystallographic analysis and/or solid state (13)C NMR experiment, in which 1:2 complexes between the BGB and the acid components were normally formed. Based on these results, Merrifield and Hypogel resin-anchored BGBs were designed and prepared as the corresponding polymer-supported host ligands. Evaluation of their coordination ability with metal salts (ZnCl(2) and CoCl(2)) and arsenic acid in aqueous media by ICP-MS showed that the latter Hypogel resin-anchored BGBs acted as effective immobilized base ligands.

1,8-Diiodo-anthracene.

The mol-ecule of the title compound, C(14)H(8)I(2), an inter-mediate in the synthesis of organic materials, is nearly planar, the maximum deviation from the mean plane being 0.032 (1) Šfor the C atoms and 0.082 (2) Šfor the I atoms. In the crystal structure, a sandwich-herringbone arrangement of mol-ecules is observed, whereas a columnar π-stacking arrangement has been reported for the chlorinated congener 1,8-dichloro-anthracene. Similar effects of halogen substituents on the modulation of packing arrangements are reported for halogenated aromatic compounds such as tetra-cenes and chrycenes.

Helicity Manipulation of a Double-Paddled Binaphthyl in a Two-Dimensional Matrix Field at the Air-Water Interface.

Molecular behavior and functionality are affected by their prevailing immediate environment. Molecular machines function according to conformational variations and have been studied largely in solution states. In order to access more highly complex functional molecular machines, it is necessary to analyze and control them in various environments. We have designed and synthesized a bisbinaphthyldurene (BBD) molecule that has two binaphthyl groups connected through a central durene moiety, allowing for the formation of several conformers. In density functional theory (DFT) calculations, BBD has five major conformers, denoted anti-1/anti-2/syn-1/syn-2/flat. It has been demonstrated that BBD exhibits different conformations in solution (anti-1 and syn-1) than on a gold surface (syn dimer and flat). In this work, the ratio of BBD conformations has been controlled in mixed monolayers with several different lipids at an air-water interface in order to compare conformational activity under different conditions. The conformations of BBD in transferred films obtained by using Langmuir-Blodgett techniques were estimated from circular dichroism spectra and DFT calculations. It has been found that the conformation of BBD in the mixed monolayer depends on its aggregated state, which has been controlled here by the mechanical properties and miscibility. In mixed monolayers with "hard" lipids having less miscibility with BBD as well as in cast film, BBD is self-aggregated and mostly forms stable anti-1 and syn-1 conformations, while unstable anti-2 and syn-2 conformers dominated in the more dispersed states involving "soft" lipids, which show good miscibility with BBD. Conformational changes in BBD are due to the formation of different aggregated states in each mixed monolayer according to the miscibility. Overall, BBD molecular conformations (and the resulting spectra) could be tuned by controlling the environment whether in solution, on a solid substrate, or in an admixture with lipids at the air-water interface.

Hydrogen Bonds and Molecular Orientations of Supramolecular Structure between Barbituric Acid and Melamine Derivative at the Air/Water Interface Revealed by Heterodyne-Detected Vibrational Sum Frequency Generation Spectroscopy.

We studied the supramolecular structure between barbituric acid (pyrimidine-2,4,6(1H,3H,5H)-trione, BA) and an amphiphilic melamine derivative at the air/water interface by heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectroscopy. HD-VSFG measurements in situ showed a positive broad band from 2300 to 2950 cm-1. By comparing the experimental results with ab initio molecular dynamics (AIMD) simulations, we assigned the broad band to the NH stretching modes of BA strongly hydrogen-bonded to the melamine derivative. In addition, we report in situ HD-VSFG spectra of the interfacial supramolecular structure in the CO stretching region. Two CO stretching bands were identified. On the basis of the signs of the C=O bands, we uniquely determined the orientation of BA. The strong hydrogen bonds and the molecular orientations are direct evidence for the supramolecular structure based on complementary hydrogen bonds at the air/water interface.

The lipid composition affects Trastuzumab adsorption at monolayers at the air-water interface.

Trastuzumab (Tmab), an antibody for breast cancer, was incorporated in Langmuir monolayers with different lipidic compositions to investigate the drug action in lipidic interfaces of pharmaceutical interest. Tmab caused all lipid films to expand as confirmed with by surface pressure-area isotherm, proving its incorporation. It also affected the compressional and structural properties as observed by in-plane elasticity curves and polarization modulation reflection-absorption infrared spectroscopy (PM-IRRAS), respectively. Although Tmab did not change significantly the compressional modulus for dipalmitoylphosphatidylcholine (DPPC) monolayers, it decreased it for the mixtures of DPPC with cholesterol. In contrast, for dipalmitoylphosphoethanolamine (DPPE), Tmab increased the compressional modulus for both monolayers, pure DPPE or mixed with cholesterol. While Brewster Angle Microscopy showed discrete distinctive morphological patterns for the monolayers investigated, PM-IRRAS showed that Tmab caused an increased number of gauche conformers related to the CH2 stretching mode for the lipid acyl chains, suggesting molecular disorder. Furthermore, the antibody kept the ß-sheet structure of the polypeptide backbone adsorbed at the lipid monolayers although the secondary conformation altered according to the film composition at the air-water interface. As a result, the results suggest that the membrane lipid profile affects the adsorption of Tmab at lipid monolayers, which can be important for the incorporation of this drug in lipidic supramolecular systems like in liposomes for drug delivery and in biomembranes.

Insight into estrogenicity of phytoestrogens using in silico simulation.

Phytoestrogens, including miroestrol and deoxymiroestrol, have the ability to act through competition with estrogen for binding to the estrogen receptor (ER). Here, we utilize manual ligand docking followed by molecular dynamics simulations and binding free energy calculations with the linear interaction energy method to predict the binding modes and the binding affinities of phytoestrogens on the ligand binding domain of ER (ERalpha-LBD). The calculations brought about the good correlation between the calculated binding free energy and the bioassays. Furthermore, consideration of Lennard-Jones and Coulomb interaction energies of miroestrol and deoxymiroestrol on ERalpha-LBD provided the information to develop the phytoestrogen derivatives as the preferred drug for ER positive breast cancer treatment.