Optical Polarization Sensor Based on a Metalens.

We investigated an optical microsensor of the polarization state of a laser light based on a metalens. In contrast to known polarization sensors based on metasurfaces that deflect different polarization types using various angles to the optical axis, the studied polarization sensor generated different patterns in the metalens focus to realize varied polarization states: left circular polarization generated a light ring in the focus, right circular polarization generated a circular focal spot, and linear polarization generated an elliptic spot with two sidelobes. Moreover, the tilt angle of the linear polarization matched the tilt angle of the elliptic focal spot. The simulation results were consistent with the theoretical predictions. A metalens with a diameter of several tens of microns was designed and fabricated in a thin amorphous silicon film with a thickness of 120 µm and a low aspect ratio, high numerical aperture, and short focal distance equal to a wavelength of 633 nm.

Spin-Orbital Conversion of a Strongly Focused Light Wave with High-Order Cylindrical-Circular Polarization.

We discuss interesting effects that occur when strongly focusing light with mth-order cylindrical-circular polarization. This type of hybrid polarization combines properties of the mth-order cylindrical polarization and circular polarization. Reluing on the Richards-Wolf formalism, we deduce analytical expressions that describe E- and H-vector components, intensity patterns, and projections of the Poynting vector and spin angular momentum (SAM) vector at the strong focus. The intensity of light in the strong focus is theoretically and numerically shown to have an even number of local maxima located along a closed contour centered at an on-axis point of zero intensity. We show that light generates 4m vortices of a transverse energy flow, with their centers located between the local intensity maxima. The transverse energy flow is also shown to change its handedness an even number of times proportional to the order of the optical vortex via a full circle around the optical axis. It is interesting that the longitudinal SAM projection changes its sign at the focus 4m times. The longitudinal SAM component is found to be positive, and the polarization vector is shown to rotate anticlockwise in the focal spot regions where the transverse energy flow rotates anticlockwise, and vice versa-the longitudinal SAM component is negative and the polarization vector rotates clockwise in the focal spot regions where the transverse energy flow rotates clockwise. This spatial separation at the focus of left and right circularly polarized light is a manifestation of the optical spin Hall effect. The results obtained in terms of controlling the intensity maxima allow the transverse mode analysis of laser beams in sensorial applications. For a demonstration of the proposed application, the metalens is calculated, which can be a prototype for an optical microsensor based on sharp focusing for measuring roughness.

Inversion of the axial projection of the spin angular momentum in the region of the backward energy flow in sharp focus.

We show theoretically and numerically that when strongly focusing a circularly polarized optical vortex, the longitudinal component of its spin angular momentum undergoes inversion. A left-handed circularly polarized input beam is found to convert in the focus and near the optical axis to a right-handed circularly polarized beam. Thanks to this effect taking place near the strong focus, where a reverse energy flow is known to occur, the spin angular momentum inversion discovered can be utilized to detect a reverse energy flow.

Tight focusing of a cylindrical vector beam by a hyperbolic secant gradient index lens.

In this Letter, we investigate the tight focusing of a second-order cylindrical vector beam by a hyperbolic secant gradient index lens with a thickness of 10 µm, a radius of 9.43 µm, and a refractive index on the axis of 3.47 (silicon). It is shown that the lens forms the reverse energy flow near its shadow surface. Moreover, it was obtained that the spherical hole in the center of the shadow plane with a diameter of 0.3 µm allows us to localize the direct energy flow inside the lens material and with the reverse energy flow in an area of free space.

Energy density and energy flux in the focus of an optical vortex: reverse flux of light energy.

Using the Richards-Wolf formulas for an arbitrary circularly polarized optical vortex with an integer topological charge m, we obtain explicit expressions for all components of the electric and magnetic field strength vectors near the focus, as well as expressions for the intensity (energy density) and for the energy flux (components of the Poynting vector) in the focal plane of an aplanatic optical system. For m=2, from the obtained expressions it follows that the energy flux near the optical axis propagates in the reversed direction, rotating along a spiral around the optical axis. On the optical axis itself, the reversed flux is maximal and decays rapidly with the distance from the axis. For m=3, in contrast, the reversed energy flux in the focal plane is minimal (zero) on the optical axis and increases (until the first ring of the light intensity) as a squared distance from the axis.

Subwavelength micropolarizer in a gold film for visible light.

We have designed and fabricated a 100 µm×100 µm four-sector binary subwavelength reflecting polarization microconverter in a gold film. Using finite-difference time-domain-aided numerical simulations and experiments, the micropolarizer was shown to convert an incident linearly polarized Gaussian beam of wavelength 532 nm into an azimuthally polarized beam. Conditions for generating on-axis regions of nonzero intensity when using propagating optical vortices with different initial polarization were deduced. By putting a spiral phase plate into an azimuthally polarized beam, the intensity pattern was shown to change from diffraction rings to a central peak.

Tight focus of light using micropolarizer and microlens.

Using a binary microlens of diameter 14 µm and focal length 532 nm (NA=0.997) in resist, we focus a 633 nm laser beam into a near-circular focal spot with dimensions (0.35 ± 0.02)λ and (0.38 ± 0.02)λ (λ is incident wavelength) at full width half-maximum intensity. The area of the focal spot is 0.105λ(2). The incident light is a mixture of linearly and radially polarized beams generated by reflecting a linearly polarized Gaussian beam at a 100 µm × 100 µm four-sector subwavelength diffractive optical microelement with a gold coating. The focusing of a linearly polarized laser beam (the other conditions being the same) is found to produce an elliptical focal spot measuring (0.40 ± 0.02)λ and (0.50 ± 0.02)λ. To our knowledge, this is the first implementation of subwavelength focusing of light using a pair of micro-optic elements (a binary microlens and a micropolarizer).

Enhancing the Spin Hall Effect of Cylindrically Polarized Beams.

Two linked gear wheels in a micromachine can be simultaneously rotated in opposite directions by using a laser beam that has in its section areas the spin angular momentum (SAM) of the opposite sign. However, for instance, a cylindrical vector beam has zero SAM in the focus. We alter a cylindrical vector beam so as to generate areas in its focus where the SAM is of opposite signs. The first alteration is adding to the cylindrical vector beam a linearly polarized beam. Thus, we study superposition of two rotationally symmetric beams: those with cylindrical and linear polarization. We obtain an expression for the SAM and prove two of its properties. The first property is that changing superposition coefficients does not change the shape of the SAM density distribution, whereas the intensity changes. The second property is that maximal SAM density is achieved when both beams in the superposition have the same energy. The second perturbation is adding a spatial carrier frequency. We study the SAM density of a cylindrical vector beam with a spatial carrier frequency. Due to periodic modulation, upon propagation in space, such a beam is split into two beams, having left and right elliptic polarization. Thus, in the beam transverse section, areas with the spin of different signs are separated in space, which is a manifestation of the spin Hall effect. We demonstrate that such light beams can be generated by metasurfaces, with the transmittance depending periodically on one coordinate.

Spin Hall Effect in Paraxial Vectorial Light Beams with an Infinite Number of Polarization Singularities.

Elements of micromachines can be driven by light, including structured light with phase and/or polarization singularities. We investigate here a paraxial vector Gaussian beam with an infinite number of polarization singularities residing evenly on a straight line. The intensity distribution is derived analytically and the polarization singularities are shown to exist only in the initial plane and in the far field. The azimuthal angle of the polarization singularities is shown to increase in the far field by π/2. We obtain the longitudinal component of the spin angular momentum (SAM) density and show that it is independent of the azimuthal angle of the polarization singularities. Upon propagation in free space, an infinite number of C-points is generated, where polarization is circular. We show that the SAM density distribution has a shape of four spots, two with left and two with right elliptic polarization. The distance to the transverse plane with the maximal SAM density decreases with decreasing distance between the polarization singularities in the initial plane. Generating such alternating areas with positive and negative SAM density, despite linear polarization in the initial plane, manifests the optical spin Hall effect. Application areas of the obtained results include designing micromachines with optically driven elements.

Ultra-Thin, Short-Focus, and High-Aperture Metalens for Generating and Detecting Laser Optical Vortices.

A combined high-aperture metalens in a thin silicon nitride film that consists of two tilted sectored metalenses is considered. Each sector of the metalens consists of a set of binary subwavelength gratings. The diameter of the metalens is 14 µm. Using a time-domain finite difference method, we show that the metalens can simultaneously detect optical vortices with two topological charges -1 and -2, almost over the entire spectrum of visible wavelengths. The metalens can distinguish several wavelengths that are focused at different points in the focal plane due to a 1-nm change in wavelength resulting in a focal spot shift of about 4 nm. When the metalens is illuminated by a Gaussian beam with left-handed circular polarization, two optical vortices with topological charges 1 and 2 are simultaneously formed 6-µm apart at the focal distance of 6 µm.