Comprehensive suppression of single-molecule conductance using destructive σ-interference.

The tunnelling of electrons through molecules (and through any nanoscale insulating and dielectric material 1 ) shows exponential attenuation with increasing length 2 , a length dependence that is reflected in the ability of the electrons to carry an electrical current. It was recently demonstrated3-5 that coherent tunnelling through a molecular junction can also be suppressed by destructive quantum interference 6 , a mechanism that is not length-dependent. For the carbon-based molecules studied previously, cancelling all transmission channels would involve the suppression of contributions to the current from both the π-orbital and σ-orbital systems. Previous reports of destructive interference have demonstrated a decrease in transmission only through the π-channel. Here we report a saturated silicon-based molecule with a functionalized bicyclo[2.2.2]octasilane moiety that exhibits destructive quantum interference in its σ-system. Although molecular silicon typically forms conducting wires 7 , we use a combination of conductance measurements and ab initio calculations to show that destructive σ-interference, achieved here by locking the silicon-silicon bonds into eclipsed conformations within a bicyclic molecular framework, can yield extremely insulating molecules less than a nanometre in length. Our molecules also exhibit an unusually high thermopower (0.97 millivolts per kelvin), which is a further experimental signature of the suppression of all tunnelling paths by destructive interference: calculations indicate that the central bicyclo[2.2.2]octasilane unit is rendered less conductive than the empty space it occupies. The molecular design presented here provides a proof-of-concept for a quantum-interference-based approach to single-molecule insulators.

Functional Monolayers on a Superatomic Pegboard.

We advance the chemistry of apical chlorine substitution in the 2D superatomic semiconductor Re6Se8Cl2 to build functional and atomically precise monolayers on the surface of the 2D superatomic Re6Se8 substrate. We create a functional monolayer by installing surface (2,2'-bipyridine)-4-sulfide (Sbpy) groups that chelate to catalytically active metal complexes. Through this reaction chemistry, we can create monolayers where we can control the distribution of catalytic sites. As a demonstration, we create highly active electrocatalysts for the oxygen evolution reaction using monolayers of cobalt(acetylacetonate)2bipyridine. We can further produce a series of catalysts by incorporating organic spacers in the functional monolayers. The structure and flexibility of the surface linkers can affect the catalytic performance, possibly by tuning the coupling between the functional monolayer and the superatomic substrate. These studies establish that the Re6Se8 sheet behaves as a chemical pegboard: a surface amenable to geometrically and chemically well-defined modification to yield functional monolayers, in this case catalytically active, that are atomically precise. This is an effective method to generate diverse families of functional nanomaterials.

High-Performance Organic Electronic Materials by Contorting Perylene Diimides.

Perylene diimide (PDI) is a workhorse of the organic electronics community. However, the vast majority of designs that include PDI substitute the core with various functional groups to encourage intimate cofacial contacts between largely planar PDIs. Over the past several years, we have observed the counterintuitive result that contorting the planar aromatic core of PDI leads to higher performing photovoltaics, photodetectors, batteries, and other organic electronic devices. In this Perspective, we describe how different modes of contortion can be reliably installed into PDI-based molecules, oligomers, and polymers. We also describe how these different contortions modify the observed optical and electronic properties of PDI. For instance, contorting PDIs into bowls leads to high-efficiency singlet fission materials, while contorting PDIs into helicene-like structures leads to nonlinear amplification of Cotton effects, culminating in the highest g-factors so far observed for organic compounds. Finally, we show how these unique optoelectronic properties give rise to higher performance organic electronic devices. We specifically note how the three-dimensional structure of these contorted aromatic molecules is responsible for the enhancements in performance we observe. Throughout this Perspective, we highlight opportunities for continued study in this rapidly developing organic materials frontier.

Broad-band Chiral Absorbance of Visible Light.

The amplification of chiral absorbance and emission is a primary figure of merit for the design of chiral chromophores. However, for dyes to be practically relevant in chiroptical applications, they must also absorb and/or emit chiral light over broad wavelength ranges. We investigate the interplay between molecular symmetry and broad-band chiral absorbance in a series of [6]helicenes. We find that an asymmetric [6]helicene containing two distinct chromophores absorbs chiral light across a much wider wavelength range than the symmetric [6]helicenes investigated here. Chemically reducing the helicenes shifts the absorption edge of the ECD spectra into the near-infrared wavelength range while preserving broad chiral absorption, producing a [6]helicene that absorbs a single handedness of light across the entire visible wavelength range.

Iterative Synthesis of Contorted Macromolecular Ladders for Fast-Charging and Long-Life Lithium Batteries.

We report here an iterative synthesis of long helical perylene diimide (hPDI[n]) nanoribbons with a length up to 16 fused benzene rings. These contorted, ladder-type conjugated, and atomically precise nanoribbons show great potential as organic fast-charging and long-lifetime battery cathodes. By tuning the length of the hPDI[n] oligomers, we can simultaneously modulate the electrical conductivity and ionic diffusivity of the material. The length of the ladders adjusts both the conjugation for electron transport and the contortion for lithium-ion transport. The longest oligomer, hPDI[6], when fabricated as the cathode in lithium batteries, features both high electrical conductivity and high ionic diffusivity. This electrode material exhibits a high power density and can be charged in less than 1 min to 66% of its maximum capacity. Remarkably, this material also has exceptional cycling stability and can operate for up to 10,000 charging-discharging cycles without any appreciable capacity decay. The design principles described here chart a clear path for organic battery electrodes that are sustainable, fast-charging, and long lasting.

Inducing Singlet Fission in Perylene Thin Films by Molecular Contortion.

Singlet fission occurs only in a limited number of molecules, and expanding the molecular toolbox is necessary for progress. Here, we apply the molecular contortion strategy to tune singlet and triplet energies and observe changes in the excited-state dynamics that are consistent with singlet fission playing a role in thin films of contorted perylene. Perylene is a prototypical molecular chromophore, which does not undergo singlet fission in its planar form from its S1 state. The tuning of the energetics that control singlet fission through molecular contortion can be applied to a large repertoire of established molecular chromophores.

Cumulene Wires Display Increasing Conductance with Increasing Length.

One-dimensional sp-hybridized carbon wires, including cumulenes and polyynes, can be regarded as finite versions of carbynes. They are likely to be good candidates for molecular-scale conducting wires as they are predicted to have a high-conductance. In this study, we first characterize the single-molecule conductance of a series of cumulenes and polyynes with a backbone ranging in length from 4 to 8 carbon atoms, including [7]cumulene, the longest cumulenic carbon wire studied to date for molecular electronics. We observe different length dependence of conductance when comparing these two forms of carbon wires. Polyynes exhibit conductance decays with increasing molecular length, while cumulenes show a conductance increase with increasing molecular length. Their distinct conducting behaviors are attributed to their different bond length alternation, which is supported by theoretical calculations. This study confirms the long-standing theoretical predictions on sp-hybridized carbon wires and demonstrates that cumulenes can form highly conducting molecular wires.

The Structural Origins of Intense Circular Dichroism in a Waggling Helicene Nanoribbon.

We report the synthesis of a new perylene-diimide-based helical nanoribbon, which exhibits the largest molar electronic circular dichroism in the visible range of any molecule. This nanoribbon also displays a substantial increase in molar circular dichroism relative to a smaller helical analogue, even though they share a similar structure: both nanoribbons incorporate two conformationally dynamic double-[4]helicene termini and a rigid [6]helicene-based core within their helical superstructures. Using DFT and TDDFT calculations, we find that the double-[4]helicenes within both nanoribbons orient similarly in solution; as such, conformational differences do not account for the disparities in circular dichroism. Instead, our results implicate the configuration of the double-[6]helicene within the larger nanoribbon as the source of the observed chiroptical amplification.

Conjugated Macrocycles in Organic Electronics.

This Account describes a body of research on the design, synthesis, and application of a new class of electronic materials made from conjugated macrocycles. Our macrocyclic design takes into consideration the useful attributes of fullerenes and what properties make fullerenes efficient n-type materials. We identified four electronic and structural elements: (1) a three-dimensional shape; (2) a conjugated and delocalized π-space; (3) the presence of an interior and exterior to the π-surface; and (4) low-energy unoccupied molecular orbitals allowing them to accept electrons. The macrocyclic design incorporates some of these properties, including a three-dimensional shape, an interior/exterior to the π-surface, and low-lying LUMOs maintaining the n-type semiconducting behavior, yet we also install synthetic flexibility in our approach in order to tune the properties further. Each of the macrocycles comprises perylenediimide cores wound together with linkers. The perylenediimide building block endows each macrocycle with the ability to accept electrons, while the synthetic flexibility to install different linkers allows us to create macrocycles with different electronic properties and sizes. We have created three macrocycles that all absorb well into the visible range of the solar spectrum and possess different shapes and sizes. We then use these materials in an array of applications that take advantage of their ability to function as n-type semiconductors, absorb in the visible range of the solar spectrum, and possess intramolecular cavities. This Account will discuss our progress in incorporating these new macrocycles in organic solar cells, organic photodetectors, organic field effect transistors, and sensors. The macrocycles outperform acyclic controls in organic solar cells. We find the more rigid macrocyclic structure results in less intrinsic charges and lower dark current in organic photodetectors. Our macrocyclic-based photodetector has the highest detectivity of non-fullerene acceptors. The macrocycles also function as sensors and are able to recognize nuanced differences in analytes. Perylenediimide-based fused oligomers are efficient materials in both organic solar cells and field effect transistors. We will use the oligomers to construct macrocycles for use in solar energy conversion. In addition, we will incorporate different electron-rich linkers in our cycles in an attempt to engineer the HOMO/LUMO gap further. Looking further into the future, we envision opportunities in applying these conjugated macrocycles as electronic host/guest materials, as concatenated electronic materials by threading the macrocycles with electroactive oligomers, and as a locus for catalysis that is driven by light and electric fields.

Permethylation Introduces Destructive Quantum Interference in Saturated Silanes.

The single-molecule conductance of silanes is suppressed due to destructive quantum interference in conformations with cisoid dihedral angles along the molecular backbone. Yet, despite the structural similarity, σ-interference effects have not been observed in alkanes. Here we report that the methyl substituents used in silanes are a prerequisite for σ-interference in these systems. Through density functional theory calculations, we find that the destructive interference is not evident to the same extent in nonmethylated silanes. We find the same is true in alkanes as the transmission is significantly suppressed in permethylated cyclic and bicyclic alkanes. Using scanning tunneling microscope break-junction method we determine the single-molecule conductance of functionalized cyclohexane and bicyclo[2.2.2]octane that are found to be higher than that of equivalent permethylated silanes. Rather than the difference between carbon and silicon atoms in the molecular backbones, our calculations reveal that it is primarily the difference between hydrogen and methyl substituents that result in the different electron transport properties of nonmethylated alkanes and permethylated silanes. Chemical substituents play an important role in determining the single-molecule conductance of saturated molecules, and this must be considered when we improve and expand the chemical design of insulating organic molecules.

Dimensional Control in Contorted Aromatic Materials.

This Account details key developments in dimensional control of contorted aromatics for organic electronics. Coronene, perylene, pyrene, and [4]helicene, which are fragments of graphene, can be contorted using facile synthetic chemistry into large nanoribbons and nano-architectures. In comparing contorted or higher-dimensional graphene architectures to planar or lower-dimensional species, the materials properties are reliably enhanced for the contorted aromatics. Examples of enhanced properties include optical absorptivity, conductivity, device photoconversion efficiency, and solubility. These enhancements are exemplified in organic photovoltaics, photodetectors, field effect transistors, and perovskite solar cells. Described herein are key advances in dimensional control of contorted aromatics that have resulted in world record photoconversion efficiencies, photodetection capabilities matching inorganic state-of-the-art devices, and ∼5 nm long ultrathin soluble graphene nanoribbons.

In Situ Coupling of Single Molecules Driven by Gold-Catalyzed Electrooxidation.

A single-molecule method has been developed based on the scanning tunneling microscope (STM) to selectively couple a series of aniline derivatives and create azobenzenes. The Au-catalyzed oxidative coupling is driven by the local electrochemical potential at the nanostructured Au STM tip. The products are detected in situ by measuring the conductance and molecular junction elongation and compared with analogous measurements of the expected azobenzene derivatives prepared ex situ. This single-molecule approach is robust, and it can quickly and reproducibly create reactions for a variety of anilines. We further demonstrate the selective synthesis of geometric isomers and the assembly of complex molecular architectures by sequential coupling of complementary anilines, demonstrating unprecedented control over bond formation at the nanoscale.

Influence of Molecular Conformation on Electron Transport in Giant, Conjugated Macrocycles.

We describe here the direct connection between the molecular conformation of a conjugated macrocycle and its macroscopic charge transport properties. We incorporate chiral, helical perylene diimide ribbons into the two separate macrocycles as the n-type, electron transporting material. As the macrocycles' films and electronic structures are analogous, the important finding is that the macrocycles' molecular structures and their associated dynamics determine device performance in organic field effect transistors. We show the more flexible macrocycle has a 4-fold increase in electron mobility in field effect transistor devices. Using a combination of spectroscopy and density functional theory calculations, we find that the origin of the difference in device performance is the ability of more flexible isomer to make intermolecular contacts relative to the more rigid counterpart.

A Helicene Nanoribbon with Greatly Amplified Chirality.

We report the synthesis and characterization of a chiral, shape-persistent, perylene-diimide-based nanoribbon. Specifically, the fusion of three perylene-diimide monomers with intervening naphthalene subunits resulted in a helical superstructure with two [6]helicene subcomponents. This π-helix-of-helicenes exhibits very intense electronic circular dichroism, including one of the largest Cotton effects ever observed in the visible range. It also displays more than an order of magnitude increase in circular dichroism for select wavelengths relative to its smaller homologue. These impressive chiroptical properties underscore the potential of this new nanoribbon architecture in the context of chiral electronic materials.

Three-Dimensional Graphene Nanostructures.

This Communication details the implementation of a new concept for the design of high-performance optoelectronic materials: three-dimensional (3D) graphene nanostructures. This general strategy is showcased through the synthesis of a three-bladed propeller nanostructure resulting from the coupling and fusion of a central triptycene hub and helical graphene nanoribbons. Importantly, these 3D graphene nanostructures show remarkable new properties that are distinct from the substituent parts. For example, the larger nanostructures show an enhancement in absorption and decreased contact resistance in optoelectronic devices. To show these enhanced properties in a device setting, the nanostructures were utilized as the electron-extracting layers in perovskite solar cells. The largest of these nanostructures achieved a PCE of 18.0%, which is one of the highest values reported for non-fullerene electron-extracting layers.

Large Variations in the Single-Molecule Conductance of Cyclic and Bicyclic Silanes.

Linear silanes are efficient molecular wires due to strong σ-conjugation in the transoid conformation; however, the structure-function relationship for the conformational dependence of the single-molecule conductance of silanes remains untested. Here we report the syntheses, electrical measurements, and theoretical characterization of four series of functionalized cyclic and bicyclic silanes including a cyclotetrasilane, a cyclopentasilane, a bicyclo[2.2.1]heptasilane, and a bicyclo[2.2.2]octasilane, which are all extended by linear silicon linkers of varying length. We find an unusual variation of the single-molecule conductance among the four series at each linker length. We determine the relative conductance of the (bi)cyclic silicon structures by using the common length dependence of the four series rather than comparing the conductance at a single length. In contrast with the cyclic π-conjugated molecules, the conductance of σ-conjugated (bi)cyclic silanes is dominated by a single path through the molecule and is controlled by the dihedral angles along this path. This strong sensitivity to molecular conformation dictates the single-molecule conductance of σ-conjugated silanes and allows for systematic control of the conductance through molecular design.

Helical Nanoribbons for Ultra-Narrowband Photodetectors.

This Communication describes a new molecular design that yields ultranarrowband organic photodetectors. The design is based on a series of helically twisted molecular ribbons as the optoelectronic material. We fabricate charge collection narrowing photodetectors based on four different helical ribbons that differ in the wavelength of their response. The photodetectors made from these materials have narrow spectral response with full-width at half maxima of <20 nm. The devices reported here are superior by approximately a factor of 5 to those from traditional organic materials due to the narrowness of their response. Moreover, the active layers for the helical ribbon-based photodetectors are solution-cast but have performance that is comparable to the state-of-the-art narrowband photodetectors made from methylammonium lead trihalide perovskite single crystals. The ultranarrow bandwidth for detection results from the helical ribbons' high absorption coefficient, good electron mobility, and sharp absorption edges that are defined by the twisted molecular conformation.

Long, Atomically Precise Donor-Acceptor Cove-Edge Nanoribbons as Electron Acceptors.

This Communication describes a new molecular design for the efficient synthesis of donor-acceptor, cove-edge graphene nanoribbons and their properties in solar cells. These nanoribbons are long (∼5 nm), atomically precise, and soluble. The design is based on the fusion of electron deficient perylene diimide oligomers with an electron rich alkoxy pyrene subunit. This strategy of alternating electron rich and electron poor units facilitates a visible light fusion reaction in >95% yield, whereas the cove-edge nature of these nanoribbons results in a high degree of twisting along the long axis. The rigidity of the backbone yields a sharp longest wavelength absorption edge. These nanoribbons are exceptional electron acceptors, and organic photovoltaics fabricated with the ribbons show efficiencies of ∼8% without optimization.

Rigid, Conjugated Macrocycles for High Performance Organic Photodetectors.

Organic photodetectors (OPDs) are attractive for their high optical absorption coefficient, broad wavelength tunability, and compatibility with lightweight and flexible devices. Here we describe a new molecular design that enables high performance organic photodetectors. We use a rigid, conjugated macrocycle as the electron acceptor in devices to obtain high photocurrent and low dark current. We make a direct comparison between the devices made with the macrocyclic acceptor and an acyclic control molecule; we find that the superior performance of the macrocycle originates from its rigid, conjugated, and cyclic structure. The macrocycle's rigid structure reduces the number of charged defects originating from deformed sp2 carbons and covalent defects from photo/thermoactivation. With this molecular design, we are able to suppress dark current density while retaining high responsivity in an ultrasensitive nonfullerene OPD. Importantly, we achieve a detectivity of ∼1014 Jones at near zero bias voltage. This is without the need for extra carrier blocking layers commonly employed in fullerene-based devices. Our devices are comparable to the best fullerene-based photodetectors, and the sensitivity at low working voltages (<0.1 V) is a record for nonfullerene OPDs.

Macrocyclization in the Design of Organic n-Type Electronic Materials.

Here, we compare analogous cyclic and acyclic π-conjugated molecules as n-type electronic materials and find that the cyclic molecules have numerous benefits in organic photovoltaics. This is the first report of such a direct comparison. We designed two conjugated cycles for this study. Each comprises four subunits: one combines four electron-accepting, redox-active, diphenyl-perylenediimide subunits, and the other alternates two electron-donating bithiophene units with two diphenyl-perylenediimide units. We compare the macrocycles to acyclic versions of these molecules and find that, relative to the acyclic analogs, the conjugated macrocycles have bathochromically shifted UV-vis absorbances and are more easily reduced. In blended films, macrocycle-based devices show higher electron mobility and good morphology. All of these factors contribute to the more than doubling of the power conversion efficiency observed in organic photovoltaic devices with these macrocycles as the n-type, electron transporting material. This study highlights the importance of geometric design in creating new molecular semiconductors. The ease with which we can design and tune the electronic properties of these cyclic structures charts a clear path to creating a new family of cyclic, conjugated molecules as electron transporting materials in optoelectronic and electronic devices.