The effect of a dam on the copper accumulation in estuarine sediment and associated nematodes in a Mekong estuary.

Dam construction across the main flow of an estuary can greatly contribute to a high accumulation of inorganic contaminants. However, it remains unknown to what extend externally available heavy metals are incorporated into biota living in those contaminated environments. In this study, the heavy metal copper was investigated both in the sediment and in the tissues of nematodes taken from the subtidal zone in the Ba Lai estuary where a dam is present, and compared with samples from the dam-free Ham Luong estuary, both part of the Mekong Delta. Samples were taken in the dry season of 2017 in four stations in the Ba Lai estuary with two stations in the downstream part from the dam and two upstream. Similar locations with respect to the distance were sampled in the dam-free estuary. The internal copper concentration in nematodes was measured by applying micro X-ray fluorescence. The results showed that both internal and sediment copper concentrations were different between the two estuaries and among estuarine sections. The highest copper concentration in nematodes was found in the upstream section of Ba Lai estuary where the greatest accumulation of sedimentary copper was observed, while the dammed downstream part was lowest in internal copper accumulation. Moreover, there was more variation in the copper levels between the two sections within the dammed estuary compared to those in Ham Luong. These observations might point to the contribution of the Ba Lai dam to the increase of copper contaminants in the benthic environment leading to accumulation in nematodes.

Cassava breeding and agronomy in Asia: 50 years of history and future directions.

In Asia, cassava (Manihot esculenta) is cultivated by more than 8 million farmers, driving the rural economy of many countries. The International Center for Tropical Agriculture (CIAT), in partnership with national agricultural research institutes (NARIs), instigated breeding and agronomic research in Asia, 1983. The breeding program has successfully released high-yielding cultivars resulting in an average yield increase from 13.0 t ha-1 in 1996 to 21.3 t ha-1 in 2016, with significant economic benefits. Following the success in increasing yields, cassava breeding has turned its focus to higher-value traits, such as waxy cassava, to reach new market niches. More recently, building resistance to invasive pests and diseases has become a top priority due to the emergent threat of cassava mosaic disease (CMD). The agronomic research involves driving profitability with advanced technologies focusing on better agronomic management practices thereby maintaining sustainable production systems. Remote sensing technologies are being tested for trait discovery and large-scale field evaluation of cassava. In summary, cassava breeding in Asia is driven by a combination of food and market demand with technological innovations to increase the productivity. Further, exploration in the potential of data-driven agriculture is needed to empower researchers and producers for sustainable advancement.

Reinforcement learning-based optimization of locomotion controller using multiple coupled CPG oscillators for elongated undulating fin propulsion.

This article proposes a locomotion controller inspired by black Knifefish for undulating elongated fin robot. The proposed controller is built by a modified CPG network using sixteen coupled Hopf oscillators with the feedback of the angle of each fin-ray. The convergence rate of the modified CPG network is optimized by a reinforcement learning algorithm. By employing the proposed controller, the undulating elongated fin robot can realize swimming pattern transformations naturally. Additionally, the proposed controller enables the configuration of the swimming pattern parameters known as the amplitude envelope, the oscillatory frequency to perform various swimming patterns. The implementation processing of the reinforcement learning-based optimization is discussed. The simulation and experimental results show the capability and effectiveness of the proposed controller through the performance of several swimming patterns in the varying oscillatory frequency and the amplitude envelope of each fin-ray.

Force Optimization of Elongated Undulating Fin Robot Using Improved PSO-Based CPG.

Biorobotic fishes have a huge impact on the development of underwater devices due to both fast swimming speed and great maneuverability. In this paper, an enhanced CPG model is investigated for locomotion control of an elongated undulating fin robot inspired by black knife fish. The proposed CPG network includes sixteen coupled Hopf oscillators for gait generation to mimic fishlike swimming. Furthermore, an enhanced particle swarm optimization (PSO), called differential particle swarm optimization (D-PSO), is introduced to find a set of optimal parameters of the modified CPG network. The proposed D-PSO-based CPG network is not only able to increase the thrust force in order to make the faster swimming speed but also avoid the local maxima for the enhanced propulsive performance of the undulating fin robot. Additionally, a comparison of D-PSO with the traditional PSO and genetic algorithm (GA) has been performed in tuning the parametric values of the CPG model to prove the superiority of the introduced method. The D-PSO-based optimization technique has been tested on the actual undulating fin robot with sixteen fin-rays. The obtained results show that the average propulsive force of the untested material is risen 5.92%, as compared to the straight CPG model.

Pb(II) adsorption mechanism and capability from aqueous solution using red mud modified by chitosan.

Red mud modified by chitosan (RM/CS) was utilized as an adsorbent to effectively remove Pb(II) from aqueous solution. The surface area of RM/CS was found to significantly increase by more than 50% compared to that of original red mud. Different factors that affected the Pb(II) removal on this material, such as initial Pb(II) concentration, pH, and contact time, were investigated. The pseudo-first-order, pseudo-second-order, and intra-diffusion models were used to fit the experimental data to investigate the Pb(II)'s removal kinetics. The Pb(II) removal followed the intra-diffusion model. Additionally, the non-zero C value obtained from this model indicates that the removal was controlled by many different mechanisms. We also found that the interaction of Pb(II) and carbonate group on the material's surface played a primary role once the adsorption equilibrium was reached. Finally, the maximum adsorptive capacity was found to be about 209 mg/g. This obtained value is higher than those obtained for some other materials. Therefore, the present RM/CS should be a potential material for removing Pb(II) from aqueous solution.

Primary biosorption mechanism of lead (II) and cadmium (II) cations from aqueous solution by pomelo (Citrus maxima) fruit peels.

The present work investigates the primary adsorption mechanisms of lead (II) and cadmium (II) cations onto pomelo fruit peel (PFP) from aqueous solution. pH, adsorption time, ion strength, and initial metal cation concentrations, which are factors affecting the uptake of these cations, are investigated. Results show that pH and ion strengths strongly affect the removal of these cations from aqueous solution. Different isotherm adsorption models, such as Langmuir, Freundlich, and Sips, are utilized to fit the experimental data in order to determine the adsorption in nature. The Langmuir monolayer adsorption capacities are found to be 47.18 mg/g for lead (II) and 13.35 mg/g for cadmium (II). Kinetic and thermodynamic studies based on a combination of FT-IR and TG-DSC spectroscopies demonstrate that electrostatic attraction plays a primary adsorption mechanism of lead (II) and cadmium (II) cations onto pomelo fruit peel.

Insight into the adsorption mechanisms of methylene blue and chromium(iii) from aqueous solution onto pomelo fruit peel.

In this study, the biosorption mechanisms of methylene blue (MB) and Cr(iii) onto pomelo peel collected from our local fruits are investigated by combining experimental analysis with ab initio simulations. Factors that affect the adsorption such as pH, adsorption time, adsorbent dosage and initial adsorbate concentration, are fully considered. Five isotherm models-Langmuir, Freundlich, Sips, Temkin, and Dubinin-Radushkevich-are employed to estimate the capacity of pomelo peel adsorption, whereas four kinetic models-pseudo-first-order, pseudo-second-order, Elovich and intra-diffusion models-are also used to investigate the mechanisms of the uptake of MB and Cr(iii) onto the pomelo fruit peel. The maximum biosorption capacities calculated from the Langmuir models for MB and Cr(iii) at 303 K are, 218.5 mg g-1 and 11.3 mg g-1, respectively. In particular, by combining, for the first time, the experimental FT-IR spectra with those obtained from ab initio calculations, we are able to demonstrate that the primary adsorption mechanisms of the uptake of MB onto pomelo fruit peel are electrostatic attraction and hydrogen-bond formations, whereas the adsorption mechanisms for Cr(iii) are electrostatic attraction and n-d interactions.

The transformation of phenyltin species during sample preparation of biological tissues using multi-isotope spike SSID-GC-ICPMS.

A multi-isotope spike species-specific isotope dilution (MI-SSID) calibration strategy in connection with gas chromatography-inductively coupled plasma mass spectrometry was applied to evaluate different extraction procedures for the speciation analysis of phenyltin (PhT) compounds in biological materials: mussel tissue BCR CRM-477 and fish tissue NIES-11. Three different isotope-enriched PhT compounds, (118)Sn-enriched monophenyltin (MPhT), (122)Sn-enriched diphenyltin (DPhT), and (124)Sn-enriched triphenyltin (TPhT), were used for the preparation of spikes to follow and correct for six possible interconversion reactions between PhT species that can take place in a sample. The acidity of the extractant, the presence of complexing reagents, and the use of ultrasonic or microwave agitation were found to affect the degradation of PhT compounds. No formation of PhTs through phenylation and negligible degradation of MPhT to inorganic tin were observed under the conditions investigated. The degree of degradation increased with increased acidity of extractant and when ultrasonication or microwave agitation was used. Under relatively mild extraction conditions, the degradation factors for DPhT and TPhT in the two reference materials studied were found, using MI-SSID, to be between 10 and 55% and 2 and 10%, respectively. Using the degradation factors, we calculated corrected concentration values for the organotin species. When microwave extraction at high power output was used, hydrogen radicals were formed that can enhance the degradation of DPhT and TPhT. The hydrogen radicals were trapped using N-tert-butyl-alpha-phenylnitrone and detected by electron spin resonance spectrometry. The effect of different extraction parameters on the degradation of PhT compounds in biological samples is discussed.

Soil radon gas in some soil types in the rainy season in Ho Chi Minh City, Vietnam.

Field experiments on soil radon and radium concentrations were carried out in eighteen locations in Ho Chi Minh City, Vietnam. Soil radon depth profiles (10-100 cm) of loam, sand and clay soil samples in the rainy season were measured using RAD7 radon detector. Mean concentrations of 222Rn and 226Ra were found to be 28.6 ±â€¯2.0 Bq.kg-1 and (1.56 ±â€¯0.06) × 104 Bq.m-3 in clay soil while they are 31.2 ±â€¯2.5 Bq.kg-1 and (1.15 ±â€¯0.05) × 104 Bq.m-3 in loam soil. They are 30.7 ±â€¯2.0 Bq.kg-1 and (9.37 ±â€¯0.52) × 103 Bq.m-3 in sandy soil, respectively. Values of radon diffusion length and diffusion coefficient for different soils were obtained using semi-empirical fit method linked to the poor diffusion of gas in clay soil (0.2 × 10-6 m2 s-1), the moderate diffusion coefficient (0.9 × 10-6 m2 s-1) in loam and good diffusion of radon gas in sandy soil (1.4 × 10-6 m2 s-1). An unexpectedly unclear linear relation was found between soil radon concentration and radium content. The grain size smaller than 0.1 mm was dominant reason for the lowest (0.15 ±â€¯0.01) and highest (0.40 ±â€¯0.03) values emanation coefficient for sand and clay soil, respectively. A strong positive correlation was found between radon concentration and soil pH level leads to soil pH is an indirect dynamic parameter affecting the migration of radon in soil.

Sensitivity of a tropical micro-crustacean (Daphnia lumholtzi) to trace metals tested in natural water of the Mekong River.

Metal contamination is one of the major issues to the environment worldwide, yet it is poorly known how exposure to metals affects tropical species. We assessed the sensitivity of a tropical micro-crustacean Daphnia lumholtzi to three trace metals: copper (Cu), zinc (Zn) and nickel (Ni). Both, acute and chronic toxicity tests were conducted with metals dissolved in in situ water collected from two sites in the lower part of the Mekong River. In the acute toxicity test, D. lumholtzi neonates were exposed to Cu (3-30µgL-1), Zn (50-540µgL-1) or Ni (46-2356µgL-1) for 48h. The values of median lethal concentrations (48h-LC50) were 11.57-16.67µg Cu L-1, 179.3-280.9µg Zn L-1, and 1026-1516µg Ni L-1. In the chronic toxicity test, animals were exposed to Cu (3 and 4µgL-1), Zn (50 and 56µgL-1), and Ni (six concentrations from 5 to 302µgL-1) for 21days. The concentrations of 4µg Cu L-1 and 6µg Ni L-1 enhanced the body length of D. lumholtzi but 46µg Ni L-1 and 50µg Zn L-1 resulted in a strong mortality, reduced the body length, postponed the maturation, and lowered the fecundity. The results tentatively suggest that D. lumholtzi showed a higher sensitivity to metals than related species in the temperate region. The results underscore the importance of including the local species in ecological risk assessment in important tropical ecosystems such as the Mekong River to arrive at a better conservational and management plan and regulatory policy to protect freshwater biodiversity from metal contamination.

Rapid-Onset Thrombocytopenia Following Piperacillin-Tazobactam Reexposure.

Drug-induced thrombocytopenia is a rare but serious adverse event that has been associated with multiple drugs including ß-lactams. Although it mostly occurs with prolonged medication use, some cases of rapid-onset thrombocytopenia have been reported. We describe the case of a 69-year-old man who developed severe and immediate thrombocytopenia following reexposure to piperacillin-tazobactam in the critical care setting. He received a 6-day course of piperacillin-tazobactam for a possible pneumonia immediately after cardiac surgery. During this course of therapy, his platelet count decreased (fluctuating between 69 × 10(3) /mm(3) and 104 × 10(3) /mm(3) ) and then progressively increased after completion of the antibiotic to 340 × 10(3) /mm(3) on postoperative day 15. Ten days after the antibiotic course was completed (postoperative day 16), the patient developed new signs of infection (fever and neutrophilia), and piperacillin-tazobactam was restarted. Eight hours after reintroducing the antibiotic, his platelet count dropped from 317 × 10(3) /mm(3) to 7 × 10(3) /mm(3) . After reviewing all the medications administered to the patient as well as other potential causes of thrombocytopenia, and given the chronology of events, piperacillin-tazobactam was suspected as the most likely offending agent and was therefore replaced by meropenem on postoperative day 17. The patient's platelet count began to rise 2 days after discontinuation of piperacillin-tazobactam and reached 245 × 10(3) /mm(3) by postoperative day 30. No spontaneous bleeding or thrombosis occurred while the patient was thrombocytopenic. Use of the Naranjo Adverse Drug Reaction Probability Scale indicated a probable relationship (score of 6) between the patient's development of thrombocytopenia and piperacillin-tazobactam therapy. This case highlights the severity and swiftness in which drug-induced thrombocytopenia may present in the context of cardiac surgery.

Preparation, preservation and application of pure isotope-enriched phenyltin species.

A method combining liquid/liquid extraction and chromatographic fractionation has been developed for the preparation of pure monophenyltin (MPhT), diphenyltin (DPhT), and triphenyltin (TPhT), synthesized from isotope-enriched Sn metal using phenylation of SnI(4) in diethylether (DEE) followed by quenching with HBr and water. After two successive extractions of the aqueous HBr phase with DEE, >99% of both DPhT and TPhT was recovered in the combined DEE phase and 94% of the MPhT remained in the aqueous phase. The MPhT in the aqueous phase was extracted into dichloromethane. The organic phases were vaporized and the PhTs were redissolved in MeOH/water/acetic acid/sodium acetate (59/30/6/8, v/v/v/w), which was also used as storing solution. Aliquots of the two solutions containing either DPhT and TPhT or MPhT were injected into a silica-based C(18) column for isolating and purifying single species. The yields of pure MPhT, DPhT, and TPhT, each synthesized from isotope-enriched (118)Sn metal, (122)Sn metal, and (124)Sn metal, were better than 99%. After chromatographic separation, the single phenyltin compounds were mixed to prepare a spike for multiple-isotope species-specific isotope dilution (MI-SSID). MI-SSID was successfully used to determine phenyltin compounds in the certified reference material, mussel tissue BCR CRM-477. At -20 degrees C, all of the fractionated phenyltin species were stable in the storage solution for at least 197 days. When these standards were stored at 4 degrees C or 22 degrees C, 4-6% of the DPhT and TPhT degraded within 27 days. The degradation of DPhT and TPhT increased with the ionic strength and acidity of the storage solution.