RESUMO
Computer vision (CV) feedback could be aimed as a constant tutor to guide ones proficiency during microsurgical practice in controlled environments. Five neurosurgeons with different levels of microsurgical expertise performed simulated vessel dissection and micro-suture in an ex vivo model for posterior computer analysis of recorded videos. A computer program called PRIME (Proficiency Index of Microsurgical Education) used in this research recognized color-labeled surgical instruments, from downloading videos into a platform, with a range of motion greater than 3 mm, for objective evaluation of number of right and left hand movements. A proficiency index of 0 to 1 was pre-established in order to evaluate continuous training improvement. PRIME computer program captured all hand movements executed by participants, except for small tremors or inconsistencies that have a range of motion inferior to 3 mm. Number of left and right hand movements were graphically expressed in order to guide more objective and efficacious training for each trainee, without requiring body sensors and cameras around the operating table. Participants with previous microsurgical experience showed improvement from 0.2 to 0.6 (p < 0.05), while novices had no improvement. Proficiency index set by CV was suggested, in a self-challenge and self-coaching manner. PRIME would offer the capability of constant laboratory microsurgical practice feedback under CV guidance, opening a new window for oriented training without a tutor or specific apparatus regarding all levels of microsurgical proficiency. Prospective, large data study is needed to confirm this hypothesis.
Assuntos
Internato e Residência , Tutoria , Treinamento por Simulação , Competência Clínica , Computadores , Humanos , Microcirurgia , Estudos ProspectivosRESUMO
OBJECTIVE: The development of microsurgical skills is crucial for neurosurgical education. The human placenta is a promising model for practicing vascular anastomosis due to its similarities with brain vessels. We propose a 2-stage model for training in extracranial-to-intracranial anastomosis using the placenta. METHODS: Initially, we propose practicing anastomosis in 2 adjacent placentas. Once successful, the procedure advances to a more challenging configuration that employs a 3-dimensionally printed skull with a window simulating a pterional craniotomy. It is positioned an intracranial placenta and an extracranial one, and the latter has a prominent vessel exposed toward the side of the craniotomy. Both placentas have one artery and vein cannulated in the umbilical cord, and we present an artificial placental circulation system for microvascular training that regulates pulsation and hydrodynamic pressure while keeping veins engorged with a pressurized bag. To verify anastomosis patency, we utilize sodium fluorescein and iodine contrast. RESULTS: The 2-stage model simulated several aspects of microvascular anastomosis. Our perfusion system allowed for intraoperative adjustments of hydrodynamic pressure and pulsation. Using iodine contrast and fluorescein enabled proper evaluation of anastomosis patency and hydrodynamic features. CONCLUSIONS: Training in the laboratory is essential for developing microsurgical skills. We have presented a model for microvascular anastomosis with artificial circulation and postoperative imaging evaluation, which is highly beneficial for enhancing the learning curve in microvascular procedures.
Assuntos
Iodo , Neurocirurgia , Humanos , Feminino , Gravidez , Neurocirurgia/educação , Placenta/cirurgia , Placenta/irrigação sanguínea , Microcirurgia/métodos , Anastomose Cirúrgica/métodosRESUMO
BACKGROUND: Stroke microsurgical cerebrovascular thrombectomy reports are limited, although this technique could be used in many centers as a primary treatment or a salvage intervention option. It requires great ability, so our aim is to describe and validate a stroke microsurgical thrombectomy ex vivo simulator with operative nuances analysis. METHODS: Human placenta (HP) models simulated middle cerebral artery vessels with intraluminal thrombus to be microsurgically excised. Six neurosurgeons performed 1-mm and 2-mm longitudinal and transverse arteriotomy in different arteries to remove a 1.5-cm length thrombus. Validation through construct validity compared time to complete the task, complete vessel cleaning, vessel manipulation, vessel stenosis, and leakage in both techniques. RESULTS: All 6 HP models reproduced with fidelity stroke microsurgical thrombectomy, so participants completed 24 sessions, 4 for each neurosurgeon on the same model in different arteries. Construct validity highlighted microsurgical technical difficulties with positive results obtained by parameters variation during performance. Transverse arteriotomy with 1-mm length had best results (P < 0.05) allowing complete thrombus removal, less stenosis, and minor leakage in abbreviated time. CONCLUSIONS: A HP simulator can reproduce with high fidelity all stroke microsurgical thrombectomy part tasks. Transverse 1-mm arteriotomy followed by thrombectomy and 2 simple sutures can fulfill all quality assurance aspects in such intervention accordingly to training model, due to easier vessel opening, complete thrombus removal, no stenosis, and faster microsuture.
Assuntos
Microcirurgia/métodos , Placenta/cirurgia , Treinamento por Simulação/métodos , Acidente Vascular Cerebral/cirurgia , Trombectomia/métodos , Competência Clínica , Feminino , Humanos , Microcirurgia/educação , Microcirurgia/normas , Neurocirurgiões/educação , Neurocirurgiões/normas , Procedimentos Neurocirúrgicos/educação , Procedimentos Neurocirúrgicos/métodos , Procedimentos Neurocirúrgicos/normas , Gravidez , Treinamento por Simulação/normas , Trombectomia/educação , Trombectomia/normas , Procedimentos Cirúrgicos Vasculares/educação , Procedimentos Cirúrgicos Vasculares/métodos , Procedimentos Cirúrgicos Vasculares/normasRESUMO
BACKGROUND: Intracranial-intracranial (IC-IC) bypass surgery involves the use of significant technical bimanual skills. Indications for this procedure are limited, so training in a simulator with brain vessels similarity could maintain microsurgical dexterity. Our goal is to describe the human placenta vascular anatomy to guide IC-IC bypasses apprenticeship. METHODS: Human placenta vascular anatomy was reported and validated with comparison to brain main vessels after studying the vascular tree of 100 placentas. Five simulated IC-IC bypasses (end to end, end to lateral, lateral to lateral, aneurysm bridge, and aneurysm exiting branch transposition) were developed and construct and concurrent validated. Statistical analysis using the t variance test was performed with a confidence interval of 0.95. RESULTS: A total of 1200 placenta vessels were used for test-retest validation with a reliability index of 0.95. All 100 human placentas were suitable to perform the 5 different bypasses. Construct validity showed a P < 0.005. Concurrent validity highlighted the technical differences among simulators. CONCLUSIONS: An ex vivo bypass model offers great similarity to main brain vessels with the possibility to practice a variety of IC-IC bypass techniques in a single simulator. Placenta vascular anatomy knowledge can improve laboratory microsurgical training.
Assuntos
Revascularização Cerebral/educação , Microcirurgia/educação , Procedimentos Neurocirúrgicos/educação , Placenta/irrigação sanguínea , Treinamento por Simulação/métodos , Anastomose Cirúrgica/educação , Competência Clínica/normas , Feminino , Humanos , Microcirurgia/normas , Modelos Anatômicos , Neurocirurgiões/educação , Neurocirurgiões/normas , Procedimentos Neurocirúrgicos/normas , Gravidez , Reprodutibilidade dos TestesRESUMO
OBJECTIVE Surgery for brain aneurysms is technically demanding. In recent years, the process to learn the technical skills necessary for these challenging procedures has been affected by a decrease in the number of surgical cases available and progressive restrictions on resident training hours. To overcome these limitations, surgical simulators such as cadaver heads and human placenta models have been developed. However, the effectiveness of these models in improving technical skills is unknown. This study assessed concurrent and predictive validity of brain aneurysm surgery simulation in a human placenta model compared with a "live" human brain cadaveric model. METHODS Two human cadaver heads and 30 human placentas were used. Twelve neurosurgeons participated in the concurrent validity part of this study, each operating on 1 human cadaver head aneurysm model and 1 human placenta model. Simulators were evaluated regarding their ability to simulate different surgical steps encountered during real surgery. The time to complete the entire aneurysm task in each simulator was analyzed. The predictive validity component of the study involved 9 neurosurgical residents divided into 3 groups to perform simulation exercises, each lasting 6 weeks. The training for the 3 groups consisted of educational video only (3 residents), human cadaver only (3 residents), and human placenta only (3 residents). All residents had equivalent microsurgical experience with superficial brain tumor surgery. After completing their practice training, residents in each of the 3 simulation groups performed surgery for an unruptured middle cerebral artery (MCA) aneurysm, and their performance was assessed by an experienced vascular neurosurgeon who watched the operative videos. RESULTS All human cadaver heads and human placentas were suitable to simulate brain aneurysm surgery. In the concurrent validity portion of the experiment, the placenta model required a longer time (p < 0.001) than cadavers to complete the task. The placenta model was considered more effective than the cadaver model in simulating sylvian fissure splitting, bipolar coagulation of oozing microvessels, and aneurysm neck and dome dissection. Both models were equally effective in simulating neck aneurysm clipping, while the cadaver model was considered superior for simulation of intraoperative rupture and for reproduction of real anatomy during simulation. In the predictive validity portion of the experiment, residents were evaluated for 4 tasks: sylvian fissure dissection, microvessel bipolar coagulation, aneurysm dissection, and aneurysm clipping. Residents trained in the human placenta simulator consistently had the highest overall performance scores when compared with those who had trained in the cadaver model and those who had simply watched operative videos (p < 0.001). CONCLUSIONS The human placenta biological simulator provides excellent simulation for some critical tasks of aneurysm surgery such as splitting of the sylvian fissure, dissection of the aneurysm neck and dome, and bipolar coagulation of surrounding microvessels. When performing surgery for an unruptured MCA aneurysm, residents who had trained in the human placenta model performed better than residents trained with other simulation scenarios/models. In this age of reduced exposure to aneurysm surgery and restrictions on resident working hours, the placenta model is a valid simulation for microneurosurgery with striking similarities with real surgery.
Assuntos
Competência Clínica , Aneurisma Intracraniano/cirurgia , Microcirurgia/educação , Procedimentos Neurocirúrgicos/educação , Placenta , Treinamento por Simulação , Feminino , Humanos , Microcirurgia/métodos , Modelos Anatômicos , Procedimentos Neurocirúrgicos/métodos , Valor Preditivo dos Testes , GravidezRESUMO
SUMMARY: The complete petrosphenoidal foramen, or canal, is an eventual and atavistic bony formation at the boundary between the posterior and middle cranial fossa, by occurrence of ossification of the superior petrosphenoidal ligament. This ligament ossification, which has important clinical and surgical significance, can be complete or incomplete, in variable degrees, and is associated with the passageway of neurovascular structures, such as the abducens nerve and the inferior petrosal sinus. This study, conducted with 175 dry skulls that belong to the University of São Paulo's collection (USP), São Paulo, Brazil, established criteria for a morphological classification of the incomplete petrosphenoid foramen in nine types. In addition, anatomical parameters were established for the morphometric determination of two diameters: the Oblique Diameter (ObDi) and the Maximum Transverse Diameter (MTD). Thus, of the 175 skulls, 146 (83.42 %) presented some of the incomplete forms of the petrosphenoid foramen, and 43 skulls (29.45 %), due to their conservation characteristics, were habilitated to the morphological study, in the classification and in the morphometry (the types I and II of our classification). The type II (incomplete foramen with bony projections of the petrosal tubercle, of the margin of the dorsum of the hypophyseal fossa or of the posterior clinoid process with a distance between them greater than 1mm) and type V (incomplete foramen with a bony projection only in one of the referential structures - posterior clinoid process) were the most common in this study (50 % of the 86 hemiskulls). Morphometry was attributed only to the types: I selar (incomplete foramen with bony projections from the petrosal tubercle and the margin of the dorsum of the hypophyseal fossa with a distance between them less than or equal to 1mm) and to the type II of this classification. The type I selar (9.3 % of the 43 skulls) resulted in an average of 3.25 mm of MTD and 4.63 mm, on average, of ObDi. The type II (25.58 % of the 43 skulls) showed, on average, 4.93 mm of MTD and 7.01 mm of ObDi.
RESUMEN: El foramen o canal petroesfenoidal completo es una formación ósea eventual y atávica en el límite entre las fosas craneal posterior y media, por osificación del ligamento petroesfenoidal superior. Esta osificación del ligamento, que tiene un importante significado clínico y quirúrgico, puede ser completa o incompleta, en grados variables, y está asociada al paso de estructuras neurovasculares, como el nervio abducente y el seno petroso inferior. Este estudio se realizó en 175 cráneos secos pertenecientes a la colección de la Universidad de São Paulo (USP), São Paulo, Brasil. Se establecieron criterios para una clasificación morfológica del foramen petrosfenoidal incompleto en nueve tipos. Además, se establecieron parámetros anatómicos para la determinación morfométrica de dos diámetros: el Diámetro Oblicuo (ObDi) y el Diámetro Transversal Máximo (MTD). Así, de los 175 cráneos, 146 (83,42 %) presentaron alguna de las formas incompletas del foramen petrosfenoidal, y 43 cráneos (29,45 %), por sus características de conservación, fueron habilitados para el estudio morfológico, en la clasificación y en la morfometría (los tipos I y II de nuestra clasificación). El Tipo II (foramen incompleto con proyecciones óseas del tubérculo petroso, del margen del dorso de la fosa hipofisaria o del proceso clinoides posterior con una distancia entre ellos mayor de 1 mm) y el Tipo V (foramen incompleto con proyección ósea solamente en una de las estructuras referenciales - proceso clinoides posterior) fueron los más comunes en este estudio (50 % de los 86 hemiscráneos). La morfometría se atribuyó únicamente al Tipo I selar (foramen incompleto con proyecciones óseas desde el tubérculo petroso y el margen del dorso de la fosa hipofisaria con una distancia entre ellos menor o igual a 1mm) y al Tipo II de esta clasificación. El Tipo I selar (9,3 % de los 43 cráneos) resultó en un promedio de 3,25 mm de MTD y 4,63 mm, en promedio, de ObDi. El Tipo II (25,58 % de los 43 cráneos) mostró, en promedio, 4,93 mm de MTD y 7,01 mm de ObDi.
Assuntos
Humanos , Osso Petroso/anatomia & histologia , Osso Esfenoide/anatomia & histologia , Ligamentos/anatomia & histologia , Brasil , ClassificaçãoRESUMO
BACKGROUND: Brain tumors are complex 3-dimensional lesions. Their resection involves training and the use of the multiple microsurgical techniques available for removal. Simulation models, with haptic and visual realism, may be useful for improving the bimanual technical skills of neurosurgical residents and neurosurgeons, potentially decreasing surgical errors and thus improving patient outcomes. OBJECTIVE: To describe and assess an ex vivo placental model for brain tumor microsurgery using a simulation tool in neurosurgical psychomotor teaching and assessment. METHODS: Sixteen human placentas were used in this research project. Intravascular blood remnants were removed by continuous saline solution irrigation of the 2 placental arteries and placental vein. Brain tumors were simulated using silicone injections in the placental stroma. Eight neurosurgeons and 8 neurosurgical residents carried out the resection of simulated tumors using the same surgical instruments and bimanual microsurgical techniques used to perform human brain tumor operations. Face and content validity was assessed using a subjective evaluation based on a 5-point Likert scale. Construct validity was assessed by analyzing the surgical performance of the neurosurgeon and resident groups. RESULTS: The placenta model simulated brain tumor surgical procedures with high fidelity. Results showed face and content validity. Construct validity was demonstrated by statistically different surgical performances among the evaluated groups. CONCLUSION: Human placentas are useful haptic models to simulate brain tumor microsurgical removal. Results using this model demonstrate face, content, and construct validity.
RESUMO
OBJECT The development of neurointerventional treatments of central nervous system disorders has resulted in the need for adequate training environments for novice interventionalists. Virtual simulators offer anatomical definition but lack adequate tactile feedback. Animal models, which provide more lifelike training, require an appropriate infrastructure base. The authors describe a training model for neurointerventional procedures using the human placenta (HP), which affords haptic training with significantly fewer resource requirements, and discuss its validation. METHODS Twelve HPs were prepared for simulated endovascular procedures. Training exercises performed by interventional neuroradiologists and novice fellows were placental angiography, stent placement, aneurysm coiling, and intravascular liquid embolic agent injection. RESULTS The endovascular training exercises proposed can be easily reproduced in the HP. Face, content, and construct validity were assessed by 6 neurointerventional radiologists and 6 novice fellows in interventional radiology. CONCLUSIONS The use of HP provides an inexpensive training model for the training of neurointerventionalists. Preliminary validation results show that this simulation model has face and content validity and has demonstrated construct validity for the interventions assessed in this study.
Assuntos
Transtornos Cerebrovasculares/cirurgia , Competência Clínica , Procedimentos Endovasculares/educação , Modelos Anatômicos , Procedimentos Neurocirúrgicos/educação , Placenta/irrigação sanguínea , Angiografia , Embolização Terapêutica , Feminino , Humanos , Aneurisma Intracraniano/cirurgia , Placenta/diagnóstico por imagem , Gravidez , StentsRESUMO
OBJECTIVE: To compare the right and left sides of the same skulls as far as the described landmarks are concerned, and establish the craniometric differences between them. METHOD: We carried out measurements in 50 adult dry human skulls comparing both sides. RESULTS: The sigmoid sinus width at the sinodural angle level was larger on the right side in 78% of the cases and at the level of the digastric notch in 72%. The jugular foramen width was also larger on the right side in 84% of the cases. The sigmoid sinus distance at the level of the digastric notch was larger on the right side in 64% of the cases, and the sigmoid sinus distance at the level of the digastric notch to the jugular foramen was larger on the right side in 70% of the cases. CONCLUSION: Significant craniometric differences were found between both sides of the same skulls.
Assuntos
Pontos de Referência Anatômicos/anatomia & histologia , Cefalometria/métodos , Cavidades Cranianas/anatomia & histologia , Base do Crânio/anatomia & histologia , Adulto , Cefalometria/instrumentação , Humanos , Lasers , Osso Occipital/anatomia & histologia , Valores de Referência , Transiluminação/métodosRESUMO
UNLABELLED: The laminoplasty technique was devised by Hirabayashi in 1978 for patients diagnosed with multilevel cervical spondylotic myelopathy. OBJECTIVE: To describe an easy modification of Hirabayashi's method and present the clinical and radiological results from a five-year follow-up study. METHOD AND RESULTS: Eighty patients had 5 levels of decompression (C3-C7), 3 patients had 6 levels of decompression (C2-T1) and 3 patients had 4 levels of decompression (C3-C6). Foraminotomies were performed in 23 cases (27%). Following Nurick`s scale, 76 patients (88%) improved, 9 (11%) had the same Nurick grade, and one patient worsened and was advised to undergo another surgical procedure. No deaths were observed. The mean surgery time was 122 min. Radiographic evaluation showed an increase in the mean sagittal diameter from 11.2 mm at pretreatment to 17.3 mm post surgery. There was no significant difference between pretreatment and post-surgery C2-C7 angles. CONCLUSIONS: This two-open-doors laminoplasty technique is safe, easy and effective and can be used as an alternative treatment for cases of multilevel cervical spondylotic myelopathy without instability.
Assuntos
Vértebras Cervicais/cirurgia , Laminectomia/métodos , Doenças da Medula Espinal/cirurgia , Espondilose/cirurgia , Vértebras Cervicais/diagnóstico por imagem , Descompressão Cirúrgica/métodos , Feminino , Seguimentos , Humanos , Masculino , Ilustração Médica , Pessoa de Meia-Idade , Estudos Prospectivos , Reprodutibilidade dos Testes , Doenças da Medula Espinal/diagnóstico por imagem , Espondilose/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Resultado do TratamentoRESUMO
BACKGROUND: Neurosurgery, a demanding specialty, involves many microsurgical procedures that require complex skills, including open surgical treatment of intracranial aneurysms. Simulation or practice models may be useful for acquiring these skills before trainees perform surgery on human patients. OBJECTIVE: To describe a human placenta model for the creation and clipping of aneurysms. METHODS: Placental vessels from 40 human placentas that were dimensionally comparable to the sizes of appropriate cerebral vessels were isolated to create aneurysms of different shapes. The placentas were then prepared for vascular microsurgery exercises. Sylvian fissure--like dissection technique and clipping of large- and small-necked aneurysms were practiced on human placentas with and without pulsatile flow. A surgical field designed to resemble a real craniotomy was reproduced in the model. RESULTS: The human placenta has a plethora of vessels that are of the proper dimensions to allow the creation of aneurysms with dome and neck dimensions similar to those of human saccular and fusiform cerebral aneurysms. These anatomic scenarios allowed aneurysm inspection, manipulation, and clipping practice. Technical microsurgical procedures include simulation of sylvian fissure dissection, unruptured aneurysm clipping, ruptured aneurysm clipping, and wrapping; all were reproduced with high fidelity to the haptics of live human surgery. Skill-training exercises realistically reproduced aneurysm clipping. CONCLUSION: Human placenta provides an inexpensive, widely available, convenient biological tissue that can be used to create models of cerebral aneurysms of different morphologies. Neurosurgical trainees may benefit from the preoperative use of a realistic model to gain familiarity and practice with critical surgical techniques for treating aneurysms.
Assuntos
Educação de Pós-Graduação em Medicina/métodos , Aneurisma Intracraniano/cirurgia , Modelos Anatômicos , Neurocirurgia/educação , Placenta/irrigação sanguínea , Aneurisma Roto/cirurgia , Feminino , Humanos , Masculino , Microcirurgia/métodos , Pessoa de Meia-Idade , Procedimentos Neurocirúrgicos/métodos , GravidezRESUMO
Acidente Vascular Encefálico (AVE) é a doença mais comum do sistema nervoso central, sendo segunda causa de morte e terceira de incapacidade no mundo. Há previsão de que a incidência de AVE dobre até 2050. Melhorias recentes na terapêutica têm demostrado eficácia na redução mortalidade, complicações e sequelas tardias. Trombectomia realizada em caráter urgente é a medida terapêutica mais eficaz para reduzir a mortalidade e as sequelas, permitindo que cerca de 50% dos pacientes retomem vida independente em até 90 dias. OBJETIVO Descrever um simulador sintético e biológico utilizando placentas bovinas e humanas capaz de reproduzir os aspectos técnicos de uma trombose da artéria cerebral média, o local mais comum de AVE de grande impacto funcional, e descrever as nuances e variações da trombectomia que podem ser testadas e validadas. MATERIAIS E MÉTODOS Sete neurocirurgiões participaram da execução dos exercícios de simulação nos quais fora utilizadas 74 placentas humanas, preparadas para simulação de trombectomias em sistema de perfusão aclaradas a manequim. O processo avaliativo constou das seguintes estapas 1 - Validação do simulador: validade de face, conteúdo e construto 2 - Trombectomia microcirúrgica: realização de procedimentos, com arteriotomia longitudinal e com arteriotomia transversal. 3 - Trombectomia endovascular CONCLUSÃO o modelo híbrido desenvolvido mediante à avaliação de Face, Conteúdo e Constructo possua qualidades suficientes que justifiquem sua adoção como subsidio à capacitação de neurocirurgiões em diversas modalidades de treinamento
Stroke is the most common disease of the central nervous system, being the second leading cause of death and third incapacity in the world. The incidence of stroke is predicted to double by 2050. Recent improvements in therapy have been shown to be effective in reducing late mortality, complications and sequelae. Urgently performed thrombectomy is the most effective therapeutic measure to reduce mortality and sequelae, allowing approximately 50% of patients to resume independent life within 90 days. OBJECTIVE To describe a synthetic and biological simulator using bovine and human placentas capable of reproducing the technical aspects of a thrombosis of the middle cerebral artery, the most common site of stroke with great functional impact, and to describe the nuances and variations of thrombectomy that can be tested and validated. MATERIALS AND METHODS Seven neurosurgeons participated in the execution of simulation exercises in which 74 human placentas were used, prepared to simulate thrombectomy in a perfusion system cleared on a mannequin. The evaluation process consisted of the following steps 1 - Simulator validation: face, content and construct validity 2 - Microsurgical thrombectomy: performance of procedures, with longitudinal arteriotomy and transverse arteriotomy. 3 - Endovascular thrombectomy CONCLUSION the hybrid model developed through the evaluation of Face, Content and Construct has sufficient qualities to justify its adoption as a subsidy for the training of neurosurgeons in various training modalities
Assuntos
Humanos , Masculino , Feminino , Placenta , Trombectomia , Embolectomia , Acidente Vascular Cerebral , Exercício de Simulação , Sistema Nervoso Central , Artéria Cerebral MédiaRESUMO
OBJECTIVE: This study was designed to use different segments of the cervical spine in cadavers to determine how much lateral mass should be resected for adequate foraminal decompression. METHODS: Six cadavers were used. The region of the cervical spine from C1 to the C7-T1 transition was dissected and exposed. The lateral mass of each vertebra was measured bilaterally before the foraminotomy in the following segments: C2-C3, C3-C4, C4-C5, C5-C6 and C6-C7. The procedure was performed with a high-speed drill and through surgical microscopy. Three foraminotomies were performed (F1, F2, F3) in each level. Lateral masses were measured after foraminotomy procedures and compared to the initial measurement, creating a percentage of lateral mass needed for decompression.. The value of the entire surface was defined as 100%. RESULTS: There was a statistical difference between the amounts of the resected lateral mass through each foraminotomy (F1, F2, F3) at the same level. However, there was no statistical significant difference among the different levels. The average percentage of resection of the lateral masses in F2 were 27.7% at C2-C3, 24.8% at C3-C4, 24.4% at C4-C5 and 23.8% and 31.2% at C5-C6 and C6-C7, respectively. In F3, the level that needed greater resection of the lateral masses was C6-C7 level, where the average resection ranged between 41.2% and 47.9%. CONCLUSION: In all segments studied, the removal of approximately 24 to 32% of the facet joint allowed adequate exposure of the foraminal segment, with visualization of the dural sac and the exit of the cervical root. .
OBJETIVO: Utilizar diferentes segmentos da coluna cervical em cadáveres para determinar quanto de massa lateral deve ser ressecada para adequada descompressão foraminal. MÉTODOS: Seis cadáveres foram usados e dissecados de modo a expor a região cervical posterior de C1 até a transição C7-T1. A massa lateral de cada vértebra foi medida bilateralmente antes da foraminotomia nos segmentos: C2-C3, C3-C4, C4-C5, C5-C6 e C6-C7. A foraminotomia foi realizada com "drill" de alta rotação e técnica microscópica. Três foraminotomias foram efetuadas: F1, F2, F3 em cada nível. As massas laterais foram medidas após procedimentos da foraminotomia e comparadas à medida inicial, criando uma porcentagem de massa lateral necessária para descompressão. O valor de cada face articular foi definido como 100%. RESULTADOS: Houve diferença estatística entre a quantidade de massa lateral ressecada entre cada foraminotomia (F1, F2, F3) no mesmo nível. Entretanto, não houve diferença estatística entre as foraminotomias em diferentes níveis. A porcentagem média de ressecção das massas laterais na foraminotomia F2 foi de 27,7% em C2-C3; 24,8% em C3-C4; 24,4% em C4-C5; 23,8% em C5-C6; 31,2% em C6-C7. Na foraminotomia F3, o nível que precisou de maior ressecção das massas laterais foi C6-C7, onde a foraminotomia variou entre 41,2% e 47,9%. CONCLUSÃO: Em todos os segmentos estudados, a remoção de aproximadamente 24 a 32% da articulação facetária permitiu exposição adequada do segmento foraminal com visualização do saco dural e da saída da raiz cervical. .
OBJETIVO: Utilizar diferentes segmentos de la columna cervical en cadáveres para determinar cuánto de masa lateral debe ser resecada para la adecuada descompresión foraminal. MÉTODOS: Seis cadáveres fueron usados y disecados de modo a exponer la región cervical posterior de C1 hasta la transición C7-T1. La masa lateral de cada vértebra fue medida bilateralmente, antes de la foraminotomía, en los segmentos: C2-C3, C3-C4, C4-C5, C5-C6 y C6-C7. La foraminotomía fue realizada con "drill" de alta rotación y técnica microscópica. Se efectuaron tres foraminotomías: F1, F2, F3 en cada nivel. Las masas laterales fueron medidas después de procedimientos de foraminotomía y se compararon con la medida inicial, creando un porcentaje de masa lateral necesaria para descompresión. El valor de cada faz articular fue definido como siendo 100%. RESULTADOS: Hubo diferencia estadística entre la cantidad de masa lateral resecada entre cada foraminotomía (F1, F2, F3) en el mismo nivel. No obstante, no hubo diferencia estadística entre las foraminotomías en niveles diferentes. El porcentaje promedio de resección de las masas laterales, en la foraminotomía F2, fue de 27,7% en C2-C3; 24,8% en C3-C4; 24,4% en C4-C5; 23,8% en C5-C6; 31,2% en C6-C7. En la foraminotomía F3, el nivel que precisó de más resección de las masas laterales fue C6-C7, en el cual la foraminotomía varió entre 41,2% y 47,9%. CONCLUSIÓN: En todos los segmentos estudiados, la remoción de aproximadamente 24 a 32% de la articulación facetaria permitió tener exposición adecuada del segmento foraminal con visualización del saco dural y de la salida de la raíz cervical. .
Assuntos
Foraminotomia , Coluna Vertebral , Cadáver , Descompressão CirúrgicaRESUMO
Objective To compare the right and left sides of the same skulls as far as the described landmarks are concerned, and establish the craniometric differences between them. Method We carried out measurements in 50 adult dry human skulls comparing both sides. Results The sigmoid sinus width at the sinodural angle level was larger on the right side in 78% of the cases and at the level of the digastric notch in 72%. The jugular foramen width was also larger on the right side in 84% of the cases. The sigmoid sinus distance at the level of the digastric notch was larger on the right side in 64% of the cases, and the sigmoid sinus distance at the level of the digastric notch to the jugular foramen was larger on the right side in 70% of the cases. Conclusion Significant craniometric differences were found between both sides of the same skulls. .
Objetivo Comparar os lados direito e esquerdo no mesmo crânio nos pontos referenciais descritos e definir as diferenças craniométricas entre ambos. Método Realizamos mensurações em 50 crânios secos de humanos adultos comparando os lados direito e esquerdo. Resultados Como resultado, obtivemos as medidas da largura do seio sigmóideo na altura do ângulo sinodural maiores no lado direito em 78% dos casos e na altura do ponto digástrico em 72%. A largura do forame jugular foi também maior no lado direito em 84% dos casos. A distância do seio sigmóideo na altura do ângulo sinodural até a altura do ponto digástrico foi maior do lado direito em 64% dos casos, e a distância do seio sigmóideo na altura do ponto digástrico até o forame jugular foi maior do lado direito em 70% dos casos. Conclusão Diferenças craniométricas significativas foram encontradas entre os dois lados do crânio. .
Assuntos
Adulto , Humanos , Pontos de Referência Anatômicos/anatomia & histologia , Cefalometria/métodos , Cavidades Cranianas/anatomia & histologia , Base do Crânio/anatomia & histologia , Cefalometria/instrumentação , Lasers , Osso Occipital/anatomia & histologia , Valores de Referência , Transiluminação/métodosRESUMO
The laminoplasty technique was devised by Hirabayashi in 1978 for patients diagnosed with multilevel cervical spondylotic myelopathy. Objective: To describe an easy modification of Hirabayashi’s method and present the clinical and radiological results from a five-year follow-up study. Method and Results: Eighty patients had 5 levels of decompression (C3-C7), 3 patients had 6 levels of decompression (C2-T1) and 3 patients had 4 levels of decompression (C3-C6). Foraminotomies were performed in 23 cases (27%). Following Nurick`s scale, 76 patients (88%) improved, 9 (11%) had the same Nurick grade, and one patient worsened and was advised to undergo another surgical procedure. No deaths were observed. The mean surgery time was 122 min. Radiographic evaluation showed an increase in the mean sagittal diameter from 11.2 mm at pretreatment to 17.3 mm post surgery. There was no significant difference between pretreatment and post-surgery C2-C7 angles. Conclusions: This two-open-doors laminoplasty technique is safe, easy and effective and can be used as an alternative treatment for cases of multilevel cervical spondylotic myelopathy without instability. .
A laminoplastia é técnica clássica descrita por Hirabayashi em 1978 para descompressão do canal cervical sem utilizar prótese. A principal indicação é o tratamento da mielopatia espondilotica cervical sem instabilidade. Objetivo: Descrever modificação simples da técnica de laminoplastia clássica de Hirabayashi com resultados clínicos e radiográficos em 5 anos de acompanhamento. Resultados e Método: Foram acompanhados 86 pacientes. Em 80, foi feita descompressão por laminoplastia em 5 níveis (C3-C7); em 3, descompressão em 6 níveis (C2-T1); em 3, descompressao em 4 níveis (C3-C6). Em 23 casos (27%), foi realizada foraminotomia associada a descompressão medular. O acompanhamento dos pacientes foi feito utilizando a escala de Nurick. Em 76 pacientes (88%) houve melhora do grau de Nurick. Não houve mortalidade associada à técnica. O tempo médio do procedimento cirúrgico foi de 122 minutos. Em relação à avaliação radiográfica, houve aumento do diâmetro sagital médio do canal cervical de 11,2mm para 17,3mm. Não houve diferença estatística do ângulo C2-C7 nas avaliações antes e após o procedimento cirúrgico. Conclusão: A nova técnica de laminoplastia descrita no presente estudo foi segura, de fácil execução, efetiva, não utiliza protese e não há instabilidade do canal cervical. .
Assuntos
Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Vértebras Cervicais/cirurgia , Laminectomia/métodos , Doenças da Medula Espinal/cirurgia , Espondilose/cirurgia , Vértebras Cervicais , Descompressão Cirúrgica/métodos , Seguimentos , Ilustração Médica , Estudos Prospectivos , Reprodutibilidade dos Testes , Doenças da Medula Espinal , Espondilose , Tomografia Computadorizada por Raios X , Resultado do TratamentoRESUMO
São descritos os pontos craniométricos e, a partir deles, definidos os pontos referenciais e as linhas para delimitar os principais acessos cranianos: pterional, fronto-orbital, frontobasal, frontal, temporal anterior, parietal, occipital, suboccipital e pontos de punção dos cornos frontal e occipital do ventrículo lateral.
Craniometric points are described, and from them, set the reference points and lines to delimit the main cranial approaches: pterional, fronto-orbital, frontobasal, frontal, anterior temporal, parietal, occipital, suboccipital and points for puncture of the frontal and occipital horns of the lateral ventricles.
Assuntos
Humanos , Craniotomia , Crânio/anatomia & histologia , Crânio/cirurgia , CefalometriaRESUMO
OBJETIVO: O objetivo deste trabalho é estudar, em peças anatômicas; a relação entre os parafusos bicorticais pela técnica de Harms e Melcher e a artéria carótida interna. MÉTODOS: Nossa amostra consiste em cinco cadáveres. RESULTADOS: Os resultados encontrados foram: a média da menor distância entre o orifício de saída do parafuso e a borda medial da artéria carótida interna direita foi de 11,55 mm (com variação de 10,05 a 14,23 mm), enquanto do lado esquerdo a média foi de 7,50 mm (variando de 2,75 a 12,42 mm). A média da menor distância entre a borda posterior da artéria carótida interna e a cortical anterior da massa lateral de C1 à direita foi de 4,24 mm (variando de 2,08 a 7,48 mm), enquanto do lado esquerdo a média obtida foi de 2,98 mm (com variação de 1,83 a 3,83 mm). CONCLUSÃO: Os resultados encontrados estão de acordo com os estudos similares existentes na literatura que enfatizam a necessidade de uma avaliação imaginológica criteriosa da posição anatômica da artéria carótida interna antes da utilização de parafusos bicorticais na massa lateral de C1 por via posterior.
OBJECTIVE: The objective of this study is to study the relationship between bicortical screws and the internal carotid artery, in anatomical body parts, in screw fixation by the Harms and Melcher technique. METHODS: Our sample consisted of five cadavers. RESULTS: The results were as follows: the average shortest distance between the outlet of the screw and the medial edge of the right internal carotid artery was 11.55 mm (range 10.05 to 14.23 mm), while on the left side, the average was 7.50 mm (ranging from 2.75 to 12.42 mm). The average shortest distance between the posterior edge of the internal carotid artery and the anterior cortical C1 lateral mass on the right was 4.24 mm (ranging from 2.08 to 7.48 mm), while the left side, the average was 2.98 mm (ranging from 1.83 to 3.83 mm). CONCLUSION: The results are consistent with similar studies in the literature that emphasize the need for a careful assessment of images of anatomical position of the internal carotid artery prior to the use of bicortical screws in the C1 lateral mass by posterior access.
OBJETIVO: O objetivo de este estudio es, en las piezas anatómicas, la relación entre los tornillos bicorticales, mediante la técnica de Harms y Melcher, y la arteria carótida interna. MÉTODOS: La muestra se compone de cinco cadáveres. RESULTADOS: Los resultados fueron: la distancia más corta promedio, entre la salida del tornillo y el borde medial de la arteria carótida interna derecha, fue 11,55 mm (rango de 10,05 a 14,23 mm), mientras que, en la izquierda, el promedio fue 7,50 mm (rango 2,75 a 12,42 mm). La distancia más corta promedio, entre el borde posterior de la arteria carótida interna y la cortical anterior C1 de la derecha, fue 4,24 mm (que van desde 2,08 hasta 7,48 mm), mientras que, en el lado izquierdo, el promedio fue 2,98 mm. (que van desde 1,83 hasta 3,83 mm). Conclusión: Los resultados son consistentes con estudios similares en la literatura que hacen hincapié en la necesidad de una evaluación cuidadosa de las imágenes y posición anatómica de la arteria carótida interna, antes del uso de tornillos bicorticales de masa lateral de C1 por acceso posterior.