RESUMO
Organic Light Emitting Diodes (OLEDs) has been a promising new research point that has received much attention recently. Emission in a conventional OLED originates from the recombination of carriers (electrons and holes) that are injected from external electrodes. In the device, Electrons, on the other hand, are injected from the Al cathode to an electron-transporting layer and travel to the same emissive zone. Holes are injected from the transparent ITO anode to a hole-transporting layer and holes reach an emitting zone through the holetransporting layer. Electrons and holes recombine at the emissive film to formsinglet excited states, followed by emissive light. It is because OLED is basically an optical device and its structure consists of organic or inorganic layers of sub-wavelength thickness with different refractive indices. When the electron and holes are injected through the electrodes, they combine in the emission zone emitting the photons. These photons will have the reflection and transmission at each interface and the interference will determine the intensity profile. The emissive light reflected at the interfaces or the metallic electrode returns to the emissive layer and affects the radiation current efficiency. Microcavity OLED can produce saturated colors and narrow the emission spetrum as a new kind of technique. In the paper, we fabricate microcavity OLED using glass substrate. Ag film acts as the anode reflector mirror; NPB serves as the hole-transporting material; Alq3 is electron-transporting material and organic emissive material; Ag film acts as cathode reflector mirror. The microcavity OLED structures named as A, B, C and D are glass/Ag(15 nm)/MoO3 (x nm)/NPB(50 nm)/Alq3 (60 nm)/A1(100 nm). Here, A, x = 4 nm; B, x = 7 nm; C, x = 10 nm; D, x = 13 nm. The characteristic voltage, brightness and current of these devices are investigated in the electric field. The luminance from the Devices A, B, C and D reaches the luminance of 928, 1 369, 2 550 and 2 035 cd x m(-2), respectively at 13 V. At 60 mA x cm(-2), the current efficiency of the microcavity OLEDs using MnO3 are about 2.2, 2.6, 3.1 and 2.6 cd x A(-2) respectively. It is found that electrons are majority carriers and holes are minority carriers in this microcavity OLEDs. MnO3 film can improve hole injection ability from 4 to 10 nm. In addition, hole injection ability is increased with the increasing thickness of the MnO3 film.
RESUMO
Poly(3,4-ethylenedioxythiophene)/polystyrene sulfonate (PEDOT:PSS) plays an important role in inverted planar perovskite solar cells (IPPSCs) as an efficient hole extraction and transfer layer (HTL). The IPPSCs based on PEDOT:PSS normally display inferior performance with a reduced open-circuit voltage. To address this problem, here sodium citrate-doped PEDOT:PSS is adopted as an effective HTL for improving the performance of IPPSCs. Sodium citrate-doped PEDOT:PSS HTL improves the conversion efficiency of IPPSCs from 15.05% of reference cells to 18.39%. The large increase of the open-circuit voltage ( VOC) from 1.057 to 1.134 V is the main source for this performance enhancement. With the help of characterization analysis of ultraviolet photoelectron spectroscopy, scanning electron microscopy, electrochemical impedance spectroscopy, etc., the higher work function of the doped PEDOT:PSS film and the uniform crystallinity of the perovskite film on it are disclosed as the reasons for the increased VOC and the consequent performance enhancement.
RESUMO
It is demonstrated that a new solid-state cathodoluminescence device based on accelerated electron in SiO2 can be fabricated using organic light emitting materials as a fluorescent film. This device (the device of sandwiched structure) is composed of a glass substrate, an ITO layer, a double SiO2 films, and an organic fluorescent film. When a bias voltage is applied to the devices, they can uniformly emit red, green, and blue light. To some extent, when the voltage is low, the red (green) emission is obtained; and when the voltage is high, the blue emission is acquired. These emissions belong to the solid-state cathodoluminescence, they originate from the accelerated electrons in SiO2, which bombard the organic layers. Their devices have achieved full color (RGB) lighting and improved blue emitting.