Plasmon-enhanced charge carrier generation in organic photovoltaic films using silver nanoprisms.

We use photoinduced absorption spectroscopy to measure long-lived photogenerated charge carriers in optically thin donor/acceptor conjugated polymer blend films near plasmon-resonant silver nanoprisms. We measure up to 3 times more charge generation, as judged by the magnitude of the polaron absorption signal, in 35 nm thin blend films of poly(3-hexylthiophene)/phenyl-C(61)-butyric acid methyl ester on top of films of silver nanoprisms (approximately 40-100 nm edge length). We find that the polaron yields increase linearly with the total sample extinction. These excitation enhancements could in principle be used to increase photocurrents in thin organic solar cells.

Broadband absorbing bulk heterojunction photovoltaics using low-bandgap solution-processed quantum dots.

We describe bulk heterojunction (BHJ) solar cells containing blends of colloidal PbS nanocrystal quantum dots with several new donor-acceptor conjugated polymers. Using photoinduced absorption spectroscopy we found that blends of PbS quantum dots with one polymer, poly(2,3-didecyl-quinoxaline-5,8-diyl-alt-N-octyldithieno[3,2-b:2',3'-d]pyrrole) (PDTPQx), produce significantly more photoinduced charge than blends of PbS with the other donor-acceptor polymers or with traditionally studied polymers like [2-methoxy-5-(3',7'-dimethyloctyloxy)-para-phenylene vinylene] (MDMO-PPV) and poly(3-hexylthiophene) (P3HT). Photovoltaic devices made with PDTPQx/PbS blends exhibit power conversion efficiencies 10-100 times larger than previously reported BHJ blends made with IR-absorbing quantum dots.

Surface characterization of polythiophene:fullerene blends on different electrodes using near edge X-ray absorption fine structure.

We study the top surface composition of blends of the conjugated polymer regioregular poly-3-hexylthiophene (P3HT) with the fullerene (6,6)-phenyl-C(61)-butyric acid methyl ester (PCBM), an important model system for organic photovoltaics (OPVs), using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). We compare the ratio of P3HT to PCBM near the air/film interface that results from preparing blend films on two sets of substrates: (1) poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) coated indium tin oxide (ITO) as is commonly used in conventional OPV structures and (2) ZnO substrates that are either unmodified or modified with a C(60)-like self-assembled monolayer, similar to those that have been recently reported in inverted OPV structures. We find that the top surface (the film/air interface) is enriched in P3HT compared to the bulk, regardless of substrate or annealing conditions, indicating that changes in device performance due to substrate modification treatments should be attributed to the buried substrate/film interface and the bulk of the film rather than the exposed film/air interface.

Doping for speed: colloidal nanoparticles for thin-film optoelectronics.

Solution-processable semiconductor materials ranging from conjugated polymers and small organic molecules to colloidal inorganic nanoparticles are being studied for applications in both low-cost solar cells and photodetectors. High-quality thin films of many inorganic semiconductors can be prepared by techniques such as chemical vapor deposition, molecular beam epitaxy, and atomic layer deposition. In contrast, preparing device-quality films of inorganic materials from colloidal solutions can be more difficult due to the challenge of achieving well-defined doping, controlled trap densities, and reproducible surface chemistry. Nevertheless, solution deposition using colloidal precursors is an attractive goal because of the potential for low-cost, large-area processing. In recent years, a great deal of effort has focused on the colloidal synthesis of wide-band-gap metal oxides such as TiO(2), visible-absorbing II-VI compounds such as CdSe, and small-band-gap materials such as PbSe. Much of the work on visible- and IR-absorbing photodetectors has been done on materials containing metals such as Cd and Pb. A new paper in this issue demonstrates photoconductive detectors made from Cu-containing In(2)S(3) nanoplates. The incorporation of Cu into the In(2)S(3) nanoplates leads to a significant decrease in the lifetime of the photoexcited carriers, resulting in significantly faster response times for the photodetectors processed from colloidal solution.

Phase transfer of large anisotropic plasmon resonant silver nanoparticles from aqueous to organic solution.

We describe the phase transfer of large, anisotropic, silver nanoparticles (approximately 50-100 nm edge length) from water to polar organics such as alcohols, acetone, dimethylformamide and to nonpolar hexanes. We transferred the silver nanoparticles to the polar organic solvents via their precipitation in water by centrifugation and redispersion in organics. Using scanning electron microscopy (SEM) imaging and UV-vis extinction spectra, we confirmed that there was little to no shape change in the nanoparticles upon transfer to the polar solvents. The nanoparticles were stable for months in the polar organics. We also transferred the nanoparticles to hexanes with up to 75% phase transfer efficiency by using sodium oleate as a surfactant. We found the extinction spectra and transmission electron microscopy (TEM) images of the nanoparticles were similar in water and hexanes, indicating that exchange into hexanes resulted in an only slight change in shape. The nanoparticles were stable for at least 10 days in hexanes under appropriate conditions. The phase transfer efficiency decreased with an increase in the size of the nanoparticles. These results open the possibility for the conjugation of large, anisotropic plasmon resonant silver nanoparticles with organic dyes or their blends with conjugated polyelectrolytes for fundamental optical studies and applications.

Absence of photoinduced charge transfer in blends of PbSe quantum dots and conjugated polymers.

We use photoluminescence (PL) quenching and photoinduced absorption (PIA) spectroscopy to study charge transfer in bulk heterojunction blends of PbSe quantum dots with the semiconducting polymers poly-3-hexylthiophene (P3HT) and poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-para-phenylene vinylene] (MDMO-PPV). PIA spectra from the PbSe blends are compared to spectra from similar blends of the polymers with phenyl-C(61)-butyric acid methyl ester (PCBM) and blends with CdSe quantum dots. We find that the MDMO-PPV PL is quenched, and the PL lifetime is shortened upon addition of PbSe quantum dots, while the PL of the P3HT is unaffected upon blending. However, for PbSe blends with both polymers, the PIA spectra show very little polaronic signal, suggesting that few, if any, long-lived charges are being produced by photoinduced charge transfer.