RESUMO
Optical microfibers and related structures which incorporate large evanescent field and minimal size offer new opportunities for biosensing applications. In this paper we report the development of an immunosensor based on a tapered microfiber coupler embedded in a low refractive index polymer. Biomolecules adsorbed on the microfiber coupler surface modify the surrounding refractive index. By immobilizing antigens on the surface of the sensing area, the microfiber coupler was able to operate as a label-free immunosensor to detect specific antibodies. We experimentally demonstrated for the first time the sensing ability of this sensor using a fibrinogen antigen-antibody pair. By monitoring the spectral shift in the wavelength domain, the sensor was shown to be capable of detecting the specific binding between fibrinogen and anti-fibrinogen. The detected signal was found to be proportional to the anti-fibrinogen present.
Assuntos
Anticorpos/análise , Antígenos/análise , Técnicas Biossensoriais/instrumentação , Fibras Ópticas , Polímeros , Refratometria/instrumentação , HumanosRESUMO
The authors present surface engineering modifications through chemistry of poly(methylmethacrylate) (PMMA) that have dramatic effects on the result of surface-bound fluorescence immunoassays, both for specific and nonspecific signals. The authors deduce the most important effect to be clustering of antibodies on the surface leading to significant self-quenching. Secondary effects are attributable to the formation of sparse multilayers of antibody. The authors compare PMMA as an antibody support surface with ultraviolet-ozone oxidized PMMA and also to substrates that were, after the oxidation, surface modified by a four-unit poly(ethyleneglycol) carboxylic acid (PEG4), a branched tricarboxylic acid, and a series of carboxylic acid-terminated dendrimers, from generation 1.5 to 5.5. Fluorescence immunoassay and neutron reflectometry were used to compare the apparent antibody surface loading, antigen binding and nonspecific binding on these various surfaces using anti-human IgG as a model antibody, chemically coupled to the surface by amide formation. Simple physical adsorption of the antibody on PMMA resulted in a thick antibody multilayer with small antigen binding capacity. On the carboxylated surfaces, with chemical coupling, a simple monolayer was formed. The authors deduce that antibody clustering was driven by conformational inflexibility and high carboxylate density. The PEG4-modified surface was the most conformationally flexible. The dendrimer-modified interfaces showed a collapse and densification. In fluorescence immunoassay, the optimal combination of high specific and low nonspecific fluorescence signal was found for the G3.5 dendrimer.
Assuntos
Imunoglobulina G/química , Polimetil Metacrilato/química , Soroalbumina Bovina/química , Animais , Bovinos , Fluorimunoensaio/métodos , Humanos , Propriedades de SuperfícieRESUMO
Fluorescent silica nanoparticle (NP) labels are of great interest in biomedical diagnostics, however, when used in bioassays under physiological conditions they rapidly agglomerate and precipitate from solution leading to high levels of non-specific binding. In this work, using size and zeta-potential data obtained from Dynamic and Electrophoretic Light Scattering analysis, the improvement in colloidal stability of silica NPs under physiological conditions was correlated with an increase in the concentration of three additives: (1) a protein, bovine serum albumin (BSA); (2) a neutral surfactant, Tween 20®; and (3) a charged surfactant, sodium dodecyl sulfate (SDS). The number of BSA molecules present in the NP corona at each concentration was calculated using UV-Vis spectroscopy and a bicinchoninic acid protein assay (BCA). The optimal concentration of each additive was also effective in stabilizing antibody labeled fluorescent nanoparticles (αNPs) under physiological conditions. Using a fourth additive, trehalose, the colloidal stability of αNPs after freeze-drying and long-term storage also significantly improved. Both as-prepared and freeze-dried αNPs were tested in a standard fluorescence immunoassay for the detection of human IgG. The as-prepared assay showed a higher sensitivity at low concentration and a lower limit of detection when compared to a free dye assay. Assays performed with freeze dried αNPs after 4 and 22 days also showed good reproducibility.
Assuntos
Coloides/química , Corantes Fluorescentes/química , Nanopartículas/química , Dióxido de Silício/química , Liofilização , Humanos , Imunoensaio , Imunoglobulina G/química , Luz , Tamanho da Partícula , Polissorbatos/química , Quinolinas/química , Reprodutibilidade dos Testes , Espalhamento de Radiação , Soroalbumina Bovina/química , Dodecilsulfato de Sódio/química , Espectrofotometria Ultravioleta , Tensoativos/químicaRESUMO
Herein we report on a preparation and performance of stable, hydrophilic and biocompatible polymeric material suitable for functionalization of disposable substrates used in biosensors. This new material features COOH surface groups cross-linked with ethylene glycol molecules and was prepared in situ on disposable, plastic substrate by high-throughput and environmentally friendly technique called plasma-enhanced chemical vapor deposition (PECVD). The film is grafted to the plasma activated plastic by sequential deposition of tetraethylorthosilicate, forming a bonding layer, and mixed vapors of acrylic acid and diethyleneglycol dimethylether (AA/PEG) that provide the desired functional groups forming a sensing, contact layer. A superior performance of the AA/PEG coating as suitable material for substrates in biomedical devices was demonstrated in a model fluorescence linked immunosorbent assay. The results were compared with other commonly used surface materials prepared by wet chemistry methods. The unique characteristic of the AA/PEG film is that the immunoassay can be executed without the need for a blocking step, typically using albumins, without negative consequences on the bioassay results. In fact, the superior quality of the materials modified with AA/PEG film was highlighted by improving the sensitivity of an immunoassay by two orders of magnitude when compared with substrates prepared by standard surface chemistry methods.