A dusty compact object bridging galaxies and quasars at cosmic dawn.

Understanding how super-massive black holes form and grow in the early Universe has become a major challenge1,2 since it was discovered that luminous quasars existed only 700 million years after the Big Bang3,4. Simulations indicate an evolutionary sequence of dust-reddened quasars emerging from heavily dust-obscured starbursts that then transition to unobscured luminous quasars by expelling gas and dust5. Although the last phase has been identified out to a redshift of 7.6 (ref. 6), a transitioning quasar has not been found at similar redshifts owing to their faintness at optical and near-infrared wavelengths. Here we report observations of an ultraviolet compact object, GNz7q, associated with a dust-enshrouded starburst at a redshift of 7.1899 ± 0.0005. The host galaxy is more luminous in dust emission than any other known object at this epoch, forming 1,600 solar masses of stars per year within a central radius of 480 parsec. A red point source in the far-ultraviolet is identified in deep, high-resolution imaging and slitless spectroscopy. GNz7q is extremely faint in X-rays, which indicates the emergence of a uniquely ultraviolet compact star-forming region or a Compton-thick super-Eddington black-hole accretion disk at the dusty starburst core. In the latter case, the observed properties are consistent with predictions from cosmological simulations7 and suggest that GNz7q is an antecedent to unobscured luminous quasars at later epochs.

Normal, dust-obscured galaxies in the epoch of reionization.

Over the past decades, rest-frame ultraviolet (UV) observations have provided large samples of UV luminous galaxies at redshift (z) greater than 6 (refs. 1-3), during the so-called epoch of reionization. While a few of these UV-identified galaxies revealed substantial dust reservoirs4-7, very heavily dust-obscured sources at these early times have remained elusive. They are limited to a rare population of extreme starburst galaxies8-12 and companions of rare quasars13,14. These studies conclude that the contribution of dust-obscured galaxies to the cosmic star formation rate density at z > 6 is sub-dominant. Recent ALMA and Spitzer observations have identified a more abundant, less extreme population of obscured galaxies at z = 3-6 (refs. 15,16). However, this population has not been confirmed in the reionization epoch so far. Here, we report the discovery of two dust-obscured star-forming galaxies at z = 6.6813 ± 0.0005 and z = 7.3521 ± 0.0005. These objects are not detected in existing rest-frame UV data and were discovered only through their far-infrared [C II] lines and dust continuum emission as companions to typical UV-luminous galaxies at the same redshift. The two galaxies exhibit lower infrared luminosities and star-formation rates than extreme starbursts, in line with typical star-forming galaxies at z ≈ 7. This population of heavily dust-obscured galaxies appears to contribute 10-25% to the z > 6 cosmic star formation rate density.

Functional Capacity Evaluation Research: Report from the Fourth International Functional Capacity Evaluation Research Meeting.

Purpose To summarize progress of functional capacity evaluation (FCE) research based on the proceedings of the Fourth International FCE Research Conference held in Switzerland on September 21 and 22, 2018. Methods A scientific committee identified key issues in FCE research and developed the program including key note presentations, a call for abstracts, and round table discussions over 2 days. Highlights of the presentations and discussions are summarized in this article. Results Seventy-nine participants from 11 countries attended the conference where 10 keynote lectures and 21 abstracts were presented. There was also an open discussion regarding the need for an International FCE clinical practice guideline (CPG), methods for developing such a guideline, and practical next steps. Full program details and abstracts from this Fourth International FCE Research Conference are available from https://www.sar-reha.ch/interessengemeinschaften/ig-ergonomie.html . Conclusions Researchers and clinicians continue to increase the body of knowledge in the FCE field. A major finding of this conference is the diversity across the different FCE protocols and research groups as well as of the different uses of FCE across cultural and social economic systems. Next steps will include exploring the development of an international, interdisciplinary, evidence-based FCE clinical practice guideline by a committee formed at the conference.

A candidate redshift z ≈ 10 galaxy and rapid changes in that population at an age of 500 Myr.

Searches for very-high-redshift galaxies over the past decade have yielded a large sample of more than 6,000 galaxies existing just 900-2,000 million years (Myr) after the Big Bang (redshifts 6 > z > 3; ref. 1). The Hubble Ultra Deep Field (HUDF09) data have yielded the first reliable detections of z ≈ 8 galaxies that, together with reports of a γ-ray burst at z ≈ 8.2 (refs 10, 11), constitute the earliest objects reliably reported to date. Observations of z ≈ 7-8 galaxies suggest substantial star formation at z > 9-10 (refs 12, 13). Here we use the full two-year HUDF09 data to conduct an ultra-deep search for z ≈ 10 galaxies in the heart of the reionization epoch, only 500 Myr after the Big Bang. Not only do we find one possible z ≈ 10 galaxy candidate, but we show that, regardless of source detections, the star formation rate density is much smaller (∼10%) at this time than it is just ∼200 Myr later at z ≈ 8. This demonstrates how rapid galaxy build-up was at z ≈ 10, as galaxies increased in both luminosity density and volume density from z ≈ 10 to z ≈ 8. The 100-200 Myr before z ≈ 10 is clearly a crucial phase in the assembly of the earliest galaxies.

Comparison of patients in three different rehabilitation settings after knee or hip arthroplasty: a natural observational, prospective study.

BACKGROUND: Patients after primary hip or knee replacement surgery can benefit from postoperative treatment in terms of improvement of independence in ambulation, transfers, range of motion and muscle strength. After discharge from hospital, patients are referred to different treatment destination and modalities: intensive inpatient rehabilitation (IR), cure (medically prescribed stay at a convalescence center), or ambulatory treatment (AT) at home. The purpose of this study was to 1) measure functional health (primary outcome) and function relevant factors in patients with hip or knee arthroplasty and to compare them in relation to three postoperative management strategies: AT, Cure and IR and 2) compare the post-operative changes in patient's health status (between preoperative and the 6 month follow-up) for three rehabilitation settings. METHODS: Natural observational, prospective two-center study with follow-up. Sociodemographic data and functional mobility tests, Timed Up and Go (TUG) and Iowa Level of Assistance Scale (ILOAS) of 201 patients were analysed before arthroplasty and at the end of acute hospital stay (mean duration of stay: 9.7 days +/- 3.9). Changes in health state were measured with the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before and 6 months after arthroplasty. RESULTS: Compared to patients referred for IR and Cure, patients referred for AT were significantly younger and less comorbid. Patients admitted to IR had the highest functional disability before arthroplasty. Before rehabilitation, mean TUG was 40.0 s in the IR group, 33.9 s in the Cure group, and 27.5 s in the AT group, and corresponding mean ILOAS was 16.0, 13.0 and 12.2 (50.0 = worst). At the 6 months follow-up, the corresponding effect sizes of the WOMAC global score were 1.32, 1.87, and 1.51 (>0 means improvement). CONCLUSIONS: Age, comorbidity and functional disability are associated with referral for intensive inpatient rehabilitation after hip or knee arthroplasty and partly affect health changes after rehabilitation.

Reliability of clinician rated physical effort determination during functional capacity evaluation in patients with chronic musculoskeletal pain.

INTRODUCTION: Functional capacity evaluation (FCE) can be used to make clinical decisions regarding fitness-for-work. During FCE the evaluator attempts to assess the amount of physical effort of the patient. The aim of this study is to analyze the reliability of physical effort determination using observational criteria during FCE. METHODS: Twenty-one raters assessed physical effort in 18 video-recorded FCE tests independently on two occasions, 10 months apart. Physical effort was rated on a categorical four-point physical effort determination scale (PED) based on the Isernhagen criteria, and a dichotomous submaximal effort determination scale (SED). Cohen's Kappa, squared weighted Kappa and % agreement were calculated. RESULTS: Kappa values for intra-rater reliability of PED and SED for all FCE tests were 0.49 and 0.68 respectively. Kappa values for inter-rater reliability of PED for all FCE tests in the first and the second session were 0.51, and 0.72, and for SED Kappa values were 0.68 and 0.77 respectively. The inter-rater reliability of PED ranged from κ = 0.02 to κ = 0.99 between FCE tests. Acceptable reliability scores (κ > 0.60, agreement ≥80 %) for each FCE test were observed in 38 % of scores for PED and 67 % for SED. On average material handling tests had a higher reliability than postural tolerance and ambulatory tests. CONCLUSION: Dichotomous ratings of submaximal effort are more reliable than categorical criteria to determine physical effort in FCE tests. Regular education and training may improve the reliability of observational criteria for effort determination.

Perceived functional ability assessed with the spinal function sort: is it valid for European rehabilitation settings in patients with non-specific non-acute low back pain?

The aim of this study involving 170 patients suffering from non-specific low back pain was to test the validity of the spinal function sort (SFS) in a European rehabilitation setting. The SFS, a picture-based questionnaire, assesses perceived functional ability of work tasks involving the spine. All measurements were taken by a blinded research assistant; work status was assessed with questionnaires. Our study demonstrated a high internal consistency shown by a Cronbach's alpha of 0.98, reasonable evidence for unidimensionality, spearman correlations of >0.6 with work activities, and discriminating power for work status at 3 and 12 months by ROC curve analysis (area under curve = 0.760 (95% CI 0.689-0.822), respectively, 0.801 (95% CI 0.731-0.859). The standardised response mean within the two treatment groups was 0.18 and -0.31. As a result, we conclude that the perceived functional ability for work tasks can be validly assessed with the SFS in a European rehabilitation setting in patients with non-specific low back pain, and is predictive for future work status.

Material handling performance of patients with chronic low back pain during functional capacity evaluation: a comparison between three countries.

PURPOSE: Functional Capacity Evaluations (FCEs) are batteries of tests designed to measure patients' ability to perform work-related activities. Although FCEs are used worldwide, it is unknown how patients' performances compare between countries or settings. This study was performed to explore similarities and differences in FCE performance of patients with chronic low back pain (CLBP) between three international settings that utilize the same FCE protocol. METHODS: Standardized FCEs were performed on three cohorts of patients with CLBP: A sample from an outpatient rehabilitation context in The Netherlands (n = 121), a Canadian sample in a Worker's Compensation context (n = 273), and a Swiss sample in an inpatient rehabilitation context (n = 170). Patients were undergoing FCE as part of their usual clinical care. Means and standard deviations of maximum performance on the FCE material handling items were calculated and differences compared using ANOVA. Multivariable linear regression was used to determine the relationship between country of origin and FCE performance while controlling for potential confounders including, age, sex, duration of back pain problems, and self-reported pain and disability ratings. RESULTS: Compared to the Dutch sample, the mean performance of patients in the Canadian and Swiss samples was consistently lower on all FCE items. This association remained statistically significant after controlling for potential confounders. CONCLUSIONS: Considerable differences were observed between settings in maximum weight handled on the various FCE items. Future FCE research should examine the effects of a number of potentially influential factors, including variability in evaluator judgements across settings, the evaluator-patient interaction and patients' expectations of the influence of FCE results on disability compensation.

Predictive tests for non-return to work in patients with chronic low back pain.

Return to work (RTW) is the primary goal in the rehabilitation of patients with chronic low back pain. In spite of expensive rehabilitative efforts, many patients do not RTW. To increase cost effectiveness, predictive tests for non-RTW are needed to select patients for rehabilitation. The reliability of these tests must be high, to prevent exclusion of patients who might improve. This study evaluates the reliability and predictive validity of four tests and the following psychosocial factors for non-RTW: nationality, off-work duration, unemployment and work load. It was designed as a prospective cohort study of 99 patients with chronic low back pain. Upon entry, physical work load, time off work, unemployment and nationality were recorded. The study investigated four tests with an anticipated prognostic value for non-RTW: the Numeric Pain Rating Scale (NRS, 9-10 of a maximum of 10), the Step Test and Pseudo Strength Test (precipitous cessation) and Behavioural Signs. After 12 months, the RTW rate was obtained from the physicians responsible for sick-listing by postal survey. The response rate regarding RTW was 91% at 1 year. The RTW rate at 1 year was 20%. All investigated tests significantly correlated with non-RTW. Regression analysis showed that the best prediction of non-RTW was obtained when at least two out of the four tests were positive (positive predictive value 0.97, sensitivity 0.45). Unemployment, time off work, nationality and physical work load were less predictive. The results show that the combination of the four prognostic tests allows a very reliable prognosis of non-RTW. The cost effectiveness of rehabilitation aiming at RTW will, therefore, be increased by excluding patients with two or more positive tests.